Search NASA⌕ Search

SEARCH · Search NASA

Results for “SPACE EXPLORATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Dark QCD: the Next Frontier in Dark Matter

There has been a surge of interest in hidden valley models with new, strong forces, sometimes called "dark QCD". These models propose asymmetric, composite dark matter in the form of "dark hadrons" that would evade direct and indirect bounds as well as typical collider DM searches for large missing transverse momentum accompanied by radiation. However, evidence of these models can still be found in collider datasets by targeting their unique phenomenological signatures, which include semivisible jets, emerging jets, and soft unclustered energy patterns. We will present the latest experimental results for these signatures and discuss the significant strides in exploring the vast space of dark QCD models. We will further discuss the prospects for dramatic expansions in sensitivity via machine learning.

Pedro, Kevin [Fermilab]↗

Data Summarization and Inference at Scale

This is the final report for the DOE ASCR grant SC-0022260, Data Summarization and Inference at Scale, PI: Alex Pothen, Purdue University. The goal of the project was to solve data-intensive and compute-intensive problems in the physical sciences, engineering, information science, data science, etc. by designing and implementing new algorithms that could work with a subset of the data. The four subgoals were: (a) The solution of problems where the data is too large to be stored in the memory of a computer. In this streaming model of computation, the data arrives as a stream of elements to the computer, each element is processed as it arrives, and a decision is made to discard the data or to store it; only a small subset of the data proportional to the size of the output solution is stored, and when all the data has been streamed, a solution to the problem is computed from the stored subset. (b) The use of machine learning methods to compute solutions to data-intensive problems. The use of GPUs is critical to obtain high performance on machine learning tasks, but their memory sizes are smaller relative to that of CPUs. For large-scale problems, the data is sampled many times, and small samples are used with repetition, for robustness, to compute solutions to inference tasks. This sampling reduces the memory required to solve the problem, but attention is needed to avoid slow convergence to the solutions, and reduced accuracy of inference. We propose submodular optimization, Large Language Models, and physics-informed neural networks to enable GPU computations here. (c) Modeling and visualization of high-dimensional data using interpretable features. Clinical proteomic data sets from immunology for the detection of cancer and other diseases are temporal and high-dimensional, and algorithms for visualizing these data sets using clinically interpretable features are lacking. We propose methods that compute distances based on the optimal transportation problem and graph edit distances to address this problem. We also propose the use of optimal transport-based distances, spatial statistics, and network structure to classify image data sets, We apply these algorithms to electron micrographs of the peripheral nervous system in the digestive tract. (d) The design of data-intensive algorithms on emerging architectures, specifically, noisy, intermediate-scale quantum (NISQ) devices. Quantum computers offer the possibility of exploring large solution spaces due to the principle of superposition, but current quantum computers are limited by few qubits, short coherence times due to noise, poor interconections among the qubits, etc. We propose the use of the divide and conquer paradigm to solve large-scale problems, wherein collections of small subproblems are solved on the quantum devices, and the solutions to the subproblems are integrated into a solution for the original problem on a classical computer.

97 MATHEMATICS AND COMPUTING↗

Quantum surrogate models for uncertainty quantification

Surrogate models are a critical ingredient to computation-based design and validation of many DOE mission-relevant physical systems. When first-principles computation of properties of a physical systems becomes pro hibitive, surrogate models are the only path towards achieving tasks such as uncertainty quantification (UQ), exploration of design space, and validation of design choices. In this project we have developed and demonstrated a new surro gate modeling paradigm for complex models that is data-driven, non-intrusive, and has the potential to be versatile and equipped with performance guaran tees. This combination of features is absent in existing surrogate modeling tools. The framework we have developed in this project exploits a quantum-classical correspondence to establish a quantum system that mimics the dynamics of the classical Hamiltonian system from which data in the form of temporal snapshots is provided. Since quantum dynamics propagates distributions over observables, the framework is naturally suited to propagation of epistemic uncertainties in the form of distributions over initial state and parametric uncertainties. In this project, we take the first step in establishing this novel framework by deriving a quantization and de-quantization procedure, demonstrating the accuracy of the quantum surrogate models these define using two model systems, and defining the next steps in maturing the framework towards a tool applicable to Sandia mission-relevant problems.

97 MATHEMATICS AND COMPUTING↗

Multiscale and Machine Learning Modeling for Process-informed Microstructure Prediction in Additively Manufactured Materials using MALAMUTE

The Advanced Materials and Manufacturing Technologies (AMMT) program under the Department of Energy Office of Nuclear Energy aims to develop and qualify additively manufactured materials for nuclear applications. One key challenge to this is the microstructural variability observed in the additively manufactured products and their impact on the properties and performance of the material in extreme environments. AMMT is using a combination of high-throughput experimental and modeling techniques to accelerate qualification. Conventionally, in-situ and ex-situ characterizations and testing are performed to correlate different aspects of the additive manufacturing process to the final product and its performance. However, adopting a trial-and-error approach to experimentally evaluate the vast range of process parameters required to capture microstructural variability is cost-prohibitive. Modeling and simulation provide a comparatively inexpensive way to understand and correlate the microstructural evolution to the processing conditions. The modeling and simulation work-packages within the AMMT program aims to use physics-based and machine learning models to develop a digital twin for additive manufacturing that can correlate the process conditions to the final product and establish a process-structure-property-performance (PSPP) correlation. The melting and subsequent solidification that occurs during the additive process is a complex phenomenon that requires multiscale multiphysics analysis. This work package focuses on understanding the role of process variabilities on the unique microstructural characteristics of additively manufactured materials. Microstructural features at the subgrain level, such as compositional micro-heterogeneity and dislocation cells, are of particular interest here since they can influence the creep properties and radiation performance. Idaho National Laboratory’s Multiphysics Object-Oriented Simulation Environment (MOOSE), specifically the MOOSE Application Library for Advanced Manufacturing UTilitiEs (MALAMUTE) software, provides an ideal platform for developing the multiphysics multiscale model to explore the intricacies of the microstructural evolution during the AM processes within a single framework. Furthermore, given that such full-fidelity simulations can be computationally intensive, reduced order models are necessary to explore the PSPP space for additively manufactured materials in an efficient, reliable, and cost-effective way. This work focuses on capturing the microstructural variabilities at the subgrain level that are often missing in the part-scale models. In fiscal year 2025, we significantly advanced upon our work in the last fiscal year, in terms of the predictive capabilities of the physics-based and ML models, by adding the capabilities to capture subgrain-level micro-segregation during solidification using phase-field model and to predict the time-dependent dynamics of the AM process through the MOGPAR model. The alloy solidification model in MOOSE incorporates the thermodynamic properties and free energy relevant to 316 stainless steel. The model demonstrates the Cr and Ni segregation that occurs during solidification, including that the rate of solidification. The microstructural evolution model is connected to the process conditions via the surrogate model developed in this work. This enables predictions of the final microstructure in conjunctions with the manufacturing process. This work supports AMMT's rapid qualification goals by laying the foundation for an efficient and cost-effective model establishing the PSPP correlation for AM. The generated microstructures and predicted micro-segregation can be used by other work packages under AMMT to evaluate the properties and environmental response of the material at the mesoscale. Thus, this work helps to identify the key microstructural features at the subgrain level that are significant in property and performance predictions of additively manufactured components. This work will also provide inputs to the large-scale process variability models to reevaluate and validate assumptions and simplifications made in the part-scale models. Furthermore, through active learning this work can help identify the data need from both modeling and experimental sides for development of a robust digital twin for additive manufacturing and accelerate the AMMT's qualification efforts.

36 - MATERIALS SCIENCE↗

3D Cloud Aerosol Precipitation Experiment at kennaook Cape Grim (3D-CAPE-k) Field Campaign Report

The objective of this campaign was to complement the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility’s Cloud And Precipitation Experiment at kennaook (CAPE-k) in northwest Tasmania by deploying scanning, fixed pointing angle, and in situ aerosol, cloud, and precipitation remote-sensing instruments during the last six months of the experiment. These instruments provided a three-dimensional (3D) context to the second ARM Mobile Facility (AMF2) vertically pointing observations collected at the kennaook Cape Grim (KCG) site and captured a portion of the life cycle of the clouds before and after the passage over the AMF2 vertical column. These 3D cloud measurements will be used in the near future to 1) investigate how the vertical profiles of aerosol and cloud properties are representative of the broader area and how these properties evolve during the portion of the cloud life cycle captured by the scanning instruments, 2) quantify how accurate the cloud fraction derived with assumptions from vertically pointing observations are compared with direct 3D cloud fraction measurements, 3) evaluate cloud fraction and liquid water path in the Australian Community Climate and Earth-System Simulator–Convective-scale (ACCESS-C) forecast model, and 4) evaluate aerosol and cloud products from the European Space Agency/Japanese Aerospace Exploration Agency (ESA/JAXA) Earth Cloud Aerosol Radiation Explorer (EarthCARE) mission using the scanning measurements, offering more chances of exact collocation, thereby complementing the statistical approach we are planning to employ with AMF2 observations for that same purpose.

54 ENVIRONMENTAL SCIENCES↗

Parallel algorithm strategies for circuit simulation.

Circuit simulation tools (e.g., SPICE) have become invaluable in the development and design of electronic circuits. However, they have been pushed to their performance limits in addressing circuit design challenges that come from the technology drivers of smaller feature scales and higher integration. Improving the performance of circuit simulation tools through exploiting new opportunities in widely-available multi-processor architectures is a logical next step. Unfortunately, not all traditional simulation applications are inherently parallel, and quickly adapting mature application codes (even codes designed to parallel applications) to new parallel paradigms can be prohibitively difficult. In general, performance is influenced by many choices: hardware platform, runtime environment, languages and compilers used, algorithm choice and implementation, and more. In this complicated environment, the use of mini-applications small self-contained proxies for real applications is an excellent approach for rapidly exploring the parameter space of all these choices. In this report we present a multi-core performance study of Xyce, a transistor-level circuit simulation tool, and describe the future development of a mini-application for circuit simulation.

42 ENGINEERING↗

Improving performance via mini-applications.

Application performance is determined by a combination of many choices: hardware platform, runtime environment, languages and compilers used, algorithm choice and implementation, and more. In this complicated environment, we find that the use of mini-applications - small self-contained proxies for real applications - is an excellent approach for rapidly exploring the parameter space of all these choices. Furthermore, use of mini-applications enriches the interaction between application, library and computer system developers by providing explicit functioning software and concrete performance results that lead to detailed, focused discussions of design trade-offs, algorithm choices and runtime performance issues. In this paper we discuss a collection of mini-applications and demonstrate how we use them to analyze and improve application performance on new and future computer platforms.

97 MATHEMATICS AND COMPUTING↗

ParaStell: parametric modeling and neutronics support for stellarator fusion power plants

The three-dimensional variation inherent to stellarator geometries and fusion sources motivates three-dimensional modeling to obtain accurate results from computational modeling in support of design and analysis of first wall, blanket, and shield (FWBS) systems. Manually constructing stellarator fusion power plant geometries in computer-aided design (CAD) and defining the corresponding fusion source can be cumbersome and challenging. The open-source parametric modeling toolset ParaStell has been developed to automate construction of such geometries in low-fidelity. Low-fidelity modeling is useful during the conceptual phase of engineering design as a means of rapidly exploring the design space of a given device. The modeling capability of ParaStell includes in-vessel components and magnets, for any given stellarator configuration, using a parametric definition and plasma equilibrium data. Furthermore, the toolset automates the generation of detailed, tetrahedral neutron source definitions and DAGMC geometries for use in neutronics modeling. ParaStell assists rapid design iteration, parametric study, and design optimization of stellarator fusion cores. As a demonstration of the design iteration capability, the effect of the three-dimensional parameter space on tritium breeding and magnet shielding is investigated, using the WISTELL-D configuration as a design basis. Blanket and shield thicknesses are varied in three dimensions, using the space available between the plasma edge and magnet coils as a constraint. The corresponding effects on tritium breeding ratio and magnet heating are tallied using the open-source Monte Carlo particle transport code OpenMC. The inclusion of additional and higher-fidelity modeling capabilities is planned for ParaStell’s future, as well as its implementation in machine-driven optimization.

Moreno, Connor↗

Parametric model-order-reduction development for unsteady convection

A time-averaged error indicator with POD- h Greedy is developed to drive parametric model order reduction (pMOR) for 2D unsteady natural convection in a high-aspect ratio slot parameterized with the Prandtl number, Rayleigh number, and slot angle with respect to the gravity. The error indicator is extended to accommodate the energy equation and Leray regularization. Despite being two-dimensional and laminar, the target flow regime presents several challenges: 1) there is a bifurcation in the angle parameter space; 2) the solution can be multivalued, even at steady state; and 3) the solution exhibits spatio-temporal chaos at several points in the parameter space. The authors explore several reduced-order models (ROMs) and demonstrate that Leray-regularized Galerkin ROMs provide a robust solution approach for this class of flows. They further demonstrate that error-indicated pMOR can efficiently predict several QOIs, such as mean flow, mean Nusselt number and mean turbulent kinetic energy, even in the presence of a bifurcation. Finally, they show that spatio-temporal chaos can lead to lack of reproducibility in both the full-order model and the reduced-order model and that the variance in the full-order model provides a lower bound on the pMOR error in these cases.

leray regularization↗

Enabling real-time adaptation of machine learning models at x-ray Free Electron Laser facilities with high-speed training optimized computational hardware

The emergence of novel computational hardware is enabling a new paradigm for rapid machine learning model training. For the Department of Energy’s major research facilities, this developing technology will enable a highly adaptive approach to experimental sciences. In this manuscript we present the per-epoch and end-to-end training times for an example of a streaming diagnostic that is planned for the upcoming high-repetition rate x-ray Free Electron Laser, the Linac Coherent Light Source-II. We explore the parameter space of batch size and data parallel training across multiple Graphics Processing Units and Reconfigurable Dataflow Units. We show the landscape of training times with a goal of full model retraining in under 15 min. Although a full from scratch retraining of a model may not be required in all cases, we nevertheless present an example of the application of emerging computational hardware for adapting machine learning models to changing environments in real-time, during streaming data acquisition, at the rates expected for the data fire hoses of accelerator-based user facilities.

97 MATHEMATICS AND COMPUTING↗

Impact of cosmic variance on the galaxy-halo connection for Lyα emitters

In this paper we study the impact of cosmic variance and observational uncertainties in constraining the mass and occupation fraction, f{sub occ}, of dark matter (DM) halos hosting Lyα-emitting galaxies (LAEs) at high redshift. To this end, we construct mock catalogs from an N-body simulation to match the typical size of observed fields at z = 3.1 (∼1 deg{sup 2}). In our model a DM halo with mass in the range M{sub min}<M{sub h}<M{sub max} can only host one detectable LAE at most. We proceed to explore the parameter space determined by M{sub min}, M{sub max}, and f{sub occ} with a Markov Chain Monte Carlo algorithm using the angular correlation function and the LAEs’ number density as observational constraints. We find that the preferred minimum and maximum masses in our model span a wide range 10{sup 10.0}h{sup −1}M{sub ⊙}⩽M{sub min}⩽10{sup 11.1}h{sup −1}M{sub ⊙}, 10{sup 11.0}h{sup −1}M{sub ⊙}⩽M{sub max}⩽10{sup 13.0}h{sup −1}M{sub ⊙}, followed by a wide range in the occupation fraction 0.02⩽f{sub occ}⩽0.30. As a consequence, the median mass, M {sub 50}, of all the consistent models has a large uncertainty M{sub 50}=3.16{sub −2.37}{sup +9.34}×10{sup 10} h{sup −1}M{sub ⊙}. However, we find that the same individual models have a relatively tight 1σ scatter around the median mass ΔM{sub 1σ}=0.55{sub −0.31}{sup +0.11} dex. We are also able to show that f{sub occ} is uniquely determined by M{sub min}, regardless of M{sub max}. We argue that upcoming large surveys covering at least 25 deg{sup 2} should be able to put tighter constraints on M{sub min} and f{sub occ} through the LAE number density distribution width constructed over several fields of ∼1 deg{sup 2}.

79 ASTRONOMY AND ASTROPHYSICS↗

Long-term Spot Stability in the Post-common-envelope Binary QS Vir

We observed the post-common-envelope eclipsing binary with a white dwarf component, QS Vir, using the 1.88 m telescope of Kotammia Observatory in Egypt. The new observations were analyzed together with all multicolor light curves available online (sampling a period of 25 yr), using a full-feature binary system modeling software based on Roche geometry. This is the first time complete photometric modeling was done with most of these data. QS Vir is a detached system, with the red dwarf component underfilling its Roche lobe by a small margin. All light curves feature out-of-eclipse variability that is associated with ellipsoidal variation, mutual irradiation and irregularities in surface brightness of the tidally distorted and magnetically active red dwarf. We tested models with one, two, and three dark spots and found that one spot is sufficient to account for the light curve asymmetry in all data sets, although this does not rule out the presence of multiple spots. We also found that a single spotted model cannot fit light curves observed simultaneously in different filters. Instead, each filter requires a different spot configuration. To thoroughly explore the parameter space of spot locations, we devised a grid-search procedure and used it to find consistent solutions. Based on this, we conclude that the dark spot responsible for light curve distortions has been stable for the past 15 yr, after a major migration that happened between 1993 and 2002, possibly due to a flip-flop event.

79 ASTRONOMY AND ASTROPHYSICS↗

A Pluto–Charon Sonata: The Dynamical Architecture of the Circumbinary Satellite System

Using a large suite of n-body simulations, we explore the discovery space for new satellites in the Pluto–Charon system. For the adopted masses and orbits of the known satellites, there are few stable prograde or polar orbits with semimajor axes a≲1.1 a{sub H}, where a {sub H} is the semimajor axis of the outermost moon Hydra. Small moons with radii r ≲ 2 km and a ≲ 1.1 a {sub H} are ejected on timescales ranging from several years to more than 100 Myr. Orbits with a ≳ 1.1 a {sub H} are stable on timescales exceeding 150–300 Myr. Near-infrared (IR) and mid-IR imaging with several instruments on James Webb Space Telescope and ground-based occultation campaigns with 2–3 m class telescopes can detect 1–2 km satellites outside the orbit of Hydra. Searches for these moons enable new constraints on the masses of the known satellites and on theories for circumbinary satellite formation.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of Previously Classified White Dwarf–Main-sequence Binaries Using Data from the APOGEE Survey

We present analyses of near-infrared spectroscopic data from the Apache Point Observatory Galactic Evolution Experiment (APOGEE) survey for 45 previously confirmed or candidate white dwarf–main-sequence (WDMS) binaries identified by the optical Sloan Digital Sky Survey (SDSS) and LAMOST surveys. Among these 45 systems, we classify three as having red giant primaries in the LAMOST sample and 14 as young stellar object contaminants in the photometrically identified SDSS sample. From among the subsample of 28 systems that we confirm to have MS primaries, we derive and place limits on orbital periods and velocity amplitudes for 14. Seven systems have significant velocity variations that warrant a post-common-envelope (PCE) binary classification, four of which are newly classified, three of which are newly confirmed, and five for which we can derive full orbital parameters. If confirmed, one of these newly discovered systems (2M14544500+4626456) will have the second-longest orbital period reported for a typical compact PCE WDMS binary (P = 15.1 days). In addition to the seven above, we also recover and characterize with APOGEE data the well-known PCE WDMS systems EG UMa and HZ 9. We also investigate the overall metallicity distribution of the WDMS sample, which is a parameter space not often explored for these systems. Of note, we find one system (2M14244053+4929580) to be extremely metal-poor ([Fe/H] = − 1.42) relative to the rest of the near-solar sample. Additionally, the PCE systems in our sample are found to be, on average, higher in metallicity than their wide-binary counterparts, though we caution that with this small number of systems, the sample may not be representative of the overall distribution of WDMS systems.

36 MATERIALS SCIENCE↗

Multiple Climate States of Habitable Exoplanets: The Role of Obliquity and Irradiance

Stable, steady climate states on an Earth-size planet with no continents are determined as a function of the tilt of the planet’s rotation axis (obliquity) and stellar irradiance. Using a general circulation model of the atmosphere coupled to a slab ocean and a thermodynamic sea ice model, two states, the Aquaplanet and the Cryoplanet, are found for high and low stellar irradiance, respectively. In addition, four stable states with seasonally and perennially open water are discovered if comprehensively exploring a parameter space of obliquity from 0° to 90° and stellar irradiance from 70% to 135% of the present-day solar constant. Within 11% of today’s solar irradiance, we find a rich structure of stable states that extends the area of habitability considerably. For the same set of parameters, different stable states result if simulations are initialized from an aquaplanet or a cryoplanet state. This demonstrates the possibility of multiple equilibria, hysteresis, and potentially rapid climate change in response to small changes in the orbital parameters. The dynamics of the atmosphere of an aquaplanet or a cryoplanet state is investigated for similar values of obliquity and stellar irradiance. The atmospheric circulation substantially differs in the two states owing to the relative strength of the primary drivers of the meridional transport of heat and momentum. At 90° obliquity and present-day solar constant, the atmospheric dynamics of an Aquaplanet state and one with an equatorial ice cover is analyzed.

79 ASTRONOMY AND ASTROPHYSICS↗

Roche-lobe Overflow in Eccentric Planet–Star Systems

Many giant exoplanets are found near their Roche limit and in mildly eccentric orbits. In this study, we examine the fate of such planets through Roche-lobe overflow as a function of the physical properties of the binary components, including the eccentricity and the asynchronicity of the rotating planet. We use a direct three-body integrator to compute the trajectories of the lost mass in the ballistic limit and investigate the possible outcomes. We find three different outcomes for the mass transferred through the Lagrangian point L {sub 1}: (1) self-accretion by the planet, (2) direct impact on the stellar surface, and (3) disk formation around the star. We explore the parameter space of the three different regimes and find that at low eccentricities, e≲0.2, mass overflow leads to disk formation for most systems, while, for higher eccentricities or retrograde orbits, self-accretion is the only possible outcome. We conclude that the assumption often made in previous work that when a planet overflows its Roche lobe it is quickly disrupted and accreted by the star is not always valid.

79 ASTRONOMY AND ASTROPHYSICS↗

Igniting Weak Interactions in Neutron Star Postmerger Accretion Disks

The merger of two neutron stars or a neutron star and a black hole typically results in the formation of a postmerger accretion disk. Outflows from disks may dominate the overall ejecta from mergers and be a major source of r-process nuclei in our universe. We explore the parameter space of such disks and their outflows and r-process yields by performing 3D general-relativistic magnetohydrodynamic simulations with weak interactions and approximate neutrino transport. We discuss the mapping between the initial binary parameters and the parameter space of the resulting disks, chiefly characterized by their initial accretion rate. We demonstrate the existence of an ignition threshold for weak interactions at around ~10 -3 M⊙ s -1 for typical parameters by means of analytic calculations and numerical simulations. We find a degenerate, self-regulated, neutrino-cooled regime above the threshold and an advection-dominated regime below the threshold. Excess heating in the absence of neutrino cooling below the threshold leads to ≳60% of the initial disk mass being ejected in outflows, with typical velocities of ~(0.1–0.2)c, compared to ≲40% at ~(0.1–0.15)c above the threshold. While disks below the threshold show suppressed production of light r-process elements, disks above the threshold can produce the entire range of r-process elements, in good agreement with the observed solar system abundances. Disks below the ignition threshold may produce an overabundance of actinides seen in actinide-boost stars. As gravitational-wave detectors start to sample the neutron star merger parameter space, different disk realizations may be observable via their associated kilonova emission.

79 ASTRONOMY AND ASTROPHYSICS↗

Filamentary Dust Polarization and the Morphology of Neutral Hydrogen Structures

Filamentary structures in neutral hydrogen (H$\tiny{I}$) emission are well aligned with the interstellar magnetic field, so H$\tiny{I}$ emission morphology can be used to construct templates that strongly correlate with measurements of polarized thermal dust emission. We explore how the quantification of filament morphology affects this correlation. We introduce a new implementation of the Rolling Hough Transform (RHT) using spherical harmonic convolutions, which enables efficient quantification of filamentary structure on the sphere. We use this Spherical RHT algorithm along with a Hessian-based method to construct H$\tiny{I}$-based polarization templates. We discuss improvements to each algorithm relative to similar implementations in the literature and compare their outputs. By exploring the parameter space of filament morphologies with the Spherical RHT, we find that the most informative H$\tiny{I}$ structures for modeling the magnetic field structure are the thinnest resolved filaments. For this reason, we find a ~10% enhancement in the B-mode correlation with polarized dust emission with higher-resolution H$\tiny{I}$ observations. We demonstrate that certain interstellar morphologies can produce parity-violating signatures, i.e., nonzero TB and EB, even under the assumption that filaments are locally aligned with the magnetic field. Finally, we demonstrate that B modes from interstellar dust filaments are mostly affected by the topology of the filaments with respect to one another and their relative polarized intensities, whereas E modes are mostly sensitive to the shapes of individual filaments.

79 ASTRONOMY AND ASTROPHYSICS↗