Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulation Use Case”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Modeling a ring magnet in ALEGRA

We show here that Sandia's ALEGRA software can be used to model a permanent magnet in 2D and 3D, with accuracy matching that of the open-source commercial software FEMM. This is done by conducting simulations and experimental measurements for a commercial-grade N42 neodymium alloy ring magnet with a measured magnetic field strength of approximately 0.4 T in its immediate vicinity. Transient simulations using ALEGRA and static simulations using FEMM are conducted. Comparisons are made between simulations and measurements, and amongst the simulations, for sample locations in the steady-state magnetic field. The comparisons show that all models capture the data to within 7%. The FEMM and ALEGRA results agree to within approximately 2%. The most accurate solutions in ALEGRA are obtained using quadrilateral or hexahedral elements. In the case where iron shielding disks are included in the magnetized space, ALEGRA simulations are considerably more expensive because of the increased magnetic diffusion time, but FEMM and ALEGRA results are still in agreement. The magnetic field data are portable to other software interfaces using the Exodus file format.

36 MATERIALS SCIENCE↗

Geometry and Simulation Results for a Gas Turbine Representative of the Energy Efficient Engine (EEE)

This paper describes the geometry and simulation results of a gas-turbine engine based on the original EEE engine developed in the 1980s. While the EEE engine was never in production, the technology developed during the program underpins many of the current generation of gas turbine engines. This geometry is being explored as a potential multi-stage turbomachinery test case that may be used to develop technology for virtual full-engine simulation. Simulation results were used to test the validity of each component geometry representation. Results are compared to a zero-dimensional engine model developed from experimental data. The geometry is captured in a series of Initial Graphical Exchange Specification (IGES) files and is available in a supplement to this report.

Gas turbine engines↗

Geometry and Simulation Results for a Gas Turbine Representative of the Energy Efficient Engine (EEE)

This paper describes the geometry and simulation results of a gas-turbine engine based on the original EEE engine developed in the 1980s. While the EEE engine was never in production, the technology developed during the program underpins many of the current generation of gas turbine engines. This geometry is being explored as a potential multi-stage turbomachinery test case that may be used to develop technology for virtual full-engine simulation. Simulation results were used to test the validity of each component geometry representation. Results are compared to a zero-dimensional engine model developed from experimental data. The geometry is captured in a series of Initial Graphical Exchange Specification (IGES) files and is available in a supplement to this report.

Gas turbine engines↗

Dynamical masses in modified gravity

Differences in masses inferred from dynamics, such as velocity dispersions or x rays, and those inferred from lensing are a generic prediction of modified gravity theories. Viable models, however, must include some nonlinear mechanism to restore general relativity (GR) in dense environments, which is necessary to pass Solar System constraints on precisely these deviations. In this paper, we study the dynamics within virialized structures in the context of two modified gravity models, f(R) gravity and Dvali-Gabadadze-Porrati (DGP). The nonlinear mechanisms to restore GR, which f(R) and DGP implement in very different ways, have a strong impact on the dynamics in bound objects; they leave distinctive signatures in the dynamical mass-lensing mass relation as a function of mass and radius. We present measurements from N-body simulations of f(R) and DGP, as well as semianalytical models that match the simulation results to surprising accuracy in both cases. The semianalytical models are useful for making the connection to observations. Our results confirm that the environment and scale dependence of the modified gravity effects have to be taken into account when confronting gravity theories with observations of dynamics in galaxies and clusters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Validating time-distance helioseismology with realistic quiet-sun simulations

Linear time-distance helioseismic inversions are carried out for vector flow velocities using travel times measured from two ∼100{sup 2} Mm{sup 2} × 20 Mm realistic magnetohydrodynamic quiet-Sun simulations of about 20 hr. The goal is to test current seismic methods on these state-of-the-art simulations. Using recent three-dimensional inversion schemes, we find that inverted horizontal flow maps correlate well with the simulations in the upper ∼3 Mm of the domains for several filtering schemes, including phase-speed, ridge, and combined phase-speed and ridge measurements. In several cases, however, the velocity amplitudes from the inversions severely underestimate those of the simulations, possibly indicating nonlinearity of the forward problem. We also find that, while near-surface inversions of the vertical velocities are best using phase-speed filters, in almost all other example cases these flows are irretrievable due to noise, suggesting a need for statistical averaging to obtain better inferences.

79 ASTRONOMY AND ASTROPHYSICS↗

Hybrid Reynolds-Averaged/Large-Eddy Simulations of a Coaxial Supersonic Free-Jet Experiment

Reynolds-averaged and hybrid Reynolds-averaged/large-eddy simulations have been applied to a supersonic coaxial jet flow experiment. The experiment was designed to study compressible mixing flow phenomenon under conditions that are representative of those encountered in scramjet combustors. The experiment utilized either helium or argon as the inner jet nozzle fluid, and the outer jet nozzle fluid consisted of laboratory air. The inner and outer nozzles were designed and operated to produce nearly pressure-matched Mach 1.8 flow conditions at the jet exit. The purpose of the computational effort was to assess the state-of-the-art for each modeling approach, and to use the hybrid Reynolds-averaged/large-eddy simulations to gather insight into the deficiencies of the Reynolds-averaged closure models. The Reynolds-averaged simulations displayed a strong sensitivity to choice of turbulent Schmidt number. The initial value chosen for this parameter resulted in an over-prediction of the mixing layer spreading rate for the helium case, but the opposite trend was observed when argon was used as the injectant. A larger turbulent Schmidt number greatly improved the comparison of the results with measurements for the helium simulations, but variations in the Schmidt number did not improve the argon comparisons. The hybrid Reynolds-averaged/large-eddy simulations also over-predicted the mixing layer spreading rate for the helium case, while under-predicting the rate of mixing when argon was used as the injectant. The primary reason conjectured for the discrepancy between the hybrid simulation results and the measurements centered around issues related to the transition from a Reynolds-averaged state to one with resolved turbulent content. Improvements to the inflow conditions were suggested as a remedy to this dilemma. Second-order turbulence statistics were also compared to their modeled Reynolds-averaged counterparts to evaluate the effectiveness of common turbulence closure assumptions.

Baurle, Robert A.↗

Rare Earth and Transition Metal Containing Glasses

Transition metal (TM) and rare earth (RE) ions have been incorporated into many glass systems such as silicate, phosphate, and borosilicate-based oxide glasses, as well as in halide and chalcogenide glasses, that find applications ranging from optical, photonic, and magnetic devices, solid-state battery, to nuclear waste disposal. Understanding the structural role of RE and TM in these glasses can help to develop glass compositions for targeted applications with either high-optical emission efficiency, electrical conductivity, or chemical durability. In this chapter, we first provide a general introduction of the applications and structural features of RE and TM in glasses, then the critical aspects of molecular dynamics (MD) simulations of these glasses such as interatomic potentials, structural analysis tools to study RE and TM ions in glasses and their clustering behaviors, Quantitative Structure–Property Analysis (QSPR), diffusion and dynamic property calculations, and electronic structure calculations to understand electronic defects such as charge trapping and radiation effects are introduced. Three representative case studies are presented: the first one is on MD simulations of erbium- and europium-doped silica and silicate glasses, as well as cerium doped aluminophosphate glasses, that revealed the effect of glass composition on RE ion local structure and clustering behavior. Electronic structure calculations of cerium-doped glass show how the existence of multioxidation states help to mediate radiation-induced damages caused by excited electron–hole pairs was also discussed. The second one focuses on alkali vanadophosphate glasses where the existence of two vanadium oxidation states help to provide electronic conduction in the glasses while alkali ions provide ionic conduction. MD simulations were used to understand vanadium environments and other structural aspects in the phosphate glasses, as well as the ionic transport behaviors of alkali ions. The third case study is on zirconium-containing borosilicate and aluminosilicate glasses that find wide applications in nuclear waste disposal. MD simulations help to provide structural details of zirconium ions that are validated by diffraction and EXAFS spectra. The structural information was used to interpret changes of mechanical properties and chemical durability by using QSPR and other analyses-based MD-generated structure models.

Du, Jincheng↗

Uncovering the Atomistic Mechanism for Calcite Step Growth

Determining a complete atomic-level picture of how minerals grow from aqueous solution remains a challenge as macroscopic rates can be a convolution of many reactions. For the case of calcite (CaCO 3 ) in water, computer simulations have been used in this paper to map the complex thermodynamic landscape leading to growth of the two distinct steps, acute and obtuse, on the basal surface. The carbonate ion is found to preferentially adsorb at the upper edge of acute steps while Ca 2+ only adsorbs after CO 3 2- . In contrast to the conventional picture, ion pairs prefer to bind at the upper edge of the step with only one ion, at most, coordinated to the step and lower terrace. Finally, migration of the first carbonate ion to a growth site is found to be rate-limiting for kink nucleation, with this process having a lower activation energy on the obtuse step.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Uncovering the Atomistic Mechanism for Calcite Step Growth

Abstract Determining a complete atomic‐level picture of how minerals grow from aqueous solution remains a challenge as macroscopic rates can be a convolution of many reactions. For the case of calcite (CaCO 3 ) in water, computer simulations have been used to map the complex thermodynamic landscape leading to growth of the two distinct steps, acute and obtuse, on the basal surface. The carbonate ion is found to preferentially adsorb at the upper edge of acute steps while Ca 2+ only adsorbs after CO 3 2− . In contrast to the conventional picture, ion pairs prefer to bind at the upper edge of the step with only one ion, at most, coordinated to the step and lower terrace. Migration of the first carbonate ion to a growth site is found to be rate‐limiting for kink nucleation, with this process having a lower activation energy on the obtuse step.

De La Pierre, Marco↗

Heat Flux for a Relativistic Dilute Bidimensional Gas

Relativistic kinetic theory predicts substantial modifications to the dissipation mechanisms of a dilute gas. For the heat flux, these include (in the absence of external forces) a correction to the thermal conductivity and the appearance of a new, purely relativistic, term proportional to the density gradient. In this work we obtain such constitutive equation for the particular case of a bidimensional gas. The calculation is based on the Chapman–Enskog solution to the relativistic Boltzmann equation and yields analytical expressions for the corresponding transport coefficients, which are evaluated for the particular case of hard disks. These results will be useful for numerical simulations and may be applied to bidimensional non-dense materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DTLMod: A simulation framework for in situ workflow optimization

In situ processing workflows have become essential for coping with the explosion in data volume and velocity in large-scale scientific computing, providing domain scientists with early insights at runtime. Multiple frameworks implement this paradigm through a data transport layer (DTL), offering different data access modes and deployment schemes, but researchers currently lack the appropriate tools to assess design and deployment options before committing to costly real experiments. We introduce DTLMod, an open-source simulated DTL that enables performance evaluation of in situ workflow configurations at scale. Built on SimGrid, it links into any SimGrid-based simulator and is available in C++ and Python. We evaluate DTLMod along four axes: scalability (tens of thousands of simulated processes across interconnected clusters in seconds, with linear memory scaling), versatility (three implementation variants trading fidelity for speed), accuracy (simulated times faithfully reflecting real behavior), and practical utility (two use cases demonstrating evidence-based workflow design decisions).

Suter, Fred [ORNL] (ORCID:0000000319021955)↗

Investigation and quantification of flow unsteadiness in shock-particle cloud interaction

This work aims to study the interaction of a shock wave with a cloud of particles to quantify flow unsteadiness and velocity fluctuations using particle-resolved direct numerical simulation (PR-DNS). Three cases are studied, with each case revealing one aspect of the intricate flow phenomena involved in this interaction. The unsteady interaction of a shock wave with a transverse array of particles reveals the origin of unsteadiness under the effect of mutual wave-wave and wave-wake interactions between the particles. In the second case, the interaction of a shock with a particle cloud is studied, with a focus on the interaction of the complex wave system with the vortical structure. A budget analysis of the vorticity equation reveals the sources of strong unsteadiness in the particle cloud. A detailed analysis of the velocity fluctuation and kinetic energy in the fluctuating motion is performed to ascertain the importance of the velocity fluctuations that arise from the strong unsteadiness. Here, an analogous analysis is presented, in the third case, for a gradually-induced flow on the same particle cloud along with a comparison to the shock induced case to assess the impulsive effect of shock on intensity of the fluctuating field statistics.

42 ENGINEERING↗

Effects of Surface and Top Wind Shear on the Spatial Organization of Marine Stratocumulus-Topped Boundary Layers

Typically, the convective nature of Stratocumulus topped boundary layers (STBL) involves the motion of updrafts and downdrafts, driven by surface fluxes and radiative cooling, respectively. The balance between shear and buoyant forcings at the surface can determine the organization of updrafts between cellular and roll structures. We investigate the effect of varying shear at the surface and top of the STBL using Large Eddy Simulations, taking DYCOMS II RF01 as a base case. We focus on spatial identification of the following features: coherent updrafts and downdrafts, and observe how they are affected by varying shear. Stronger surface shear organizes the updrafts in rolls, causes less well-mixed thermodynamic profiles, and decreases cloud fraction and liquid water path (LWP). Stronger top shear also decreases cloud fraction and LWP more than surface shear, by thinning the cloud from the top. Features with stronger top than surface shear are associated with a net downward momentum transport and show early signs of decoupling. Classifying updrafts and downdrafts based on their vertical span and horizontal size confirms the dominance of tall objects spanning the whole STBL. Tall objects occupy 30% of the volume in the STBL, while short ones occupy less than 1%. For updraft and downdraft fluxes, these tall objects explain 65% of the vertical velocity variance and 83% of the buoyancy flux, on average. Stronger top shear also weakens the contribution of downdrafts to the turbulent fluxes and tilts the otherwise vertical development of updrafts.

54 ENVIRONMENTAL SCIENCES↗

Impact of gas background on XFEL single-particle imaging

Abstract Single-particle imaging (SPI) using X-ray free-electron Lasers (XFELs) offers the potential to determine protein structures at high spatial and temporal resolutions without the need for crystallization or vitrification. However, the technique faces challenges due to weak diffraction signals from single proteins and significant background scattering from gases used for sample delivery. A recent observation of a diffraction pattern from an isolated GroEL protein complex Ekeberg T et al. (Light Sci Appl 13:15, 2024.https://doi.org/10.1038/274s41377-023-01352-7) had similar numbers of signal and background photons. Ongoing efforts aim to reduce the background created by sample delivery, with one approach replacing most of the used gas with helium Yenupuri T et al. (Sci Rep 14:4401, 2024.https://doi.org/10.1038/s41598-024-54605-9). In this study, we investigate the effects of a reduced background on the resolution limits for SPI of isolated proteins under different experiment conditions. As a test case, we used GroEL, and we used experimentally derived parameters for our simulations. We observe that background significantly impacts the achievable resolution, particularly when the signal strength is comparable to the background. This is best exemplified at 6.0 keV, where a background reduction by a factor of 10 leads to a resolution improvement from 1.9 to 1.2 nm, for a dataset of$$10^4$$patterns.

Science & Technology - Other Topics↗

Stochastic Seismic Response of an Algiers Site with Random Depth to Bedrock

Among the important effects of the Boumerdes earthquake (Algeria, May 21{sup st} 2003) was that, within the same zone, the destructions in certain parts were more important than in others. This phenomenon is due to site effects which alter the characteristics of seismic motions and cause concentration of damage during earthquakes. Local site effects such as thickness and mechanical properties of soil layers have important effects on the surface ground motions.This paper deals with the effect of the randomness aspect of the depth to bedrock (soil layers heights) which is assumed to be a random variable with lognormal distribution. This distribution is suitable for strictly non-negative random variables with large values of the coefficient of variation. In this case, Monte Carlo simulations are combined with the stiffness matrix method, used herein as a deterministic method, for evaluating the effect of the depth to bedrock uncertainty on the seismic response of a multilayered soil. This study considers a P and SV wave propagation pattern using input accelerations collected at Keddara station, located at 20 km from the epicenter, as it is located directly on the bedrock.A parametric study is conducted do derive the stochastic behavior of the peak ground acceleration and its response spectrum, the transfer function and the amplification factors. It is found that the soil height heterogeneity causes a widening of the frequency content and an increase in the fundamental frequency of the soil profile, indicating that the resonance phenomenon concerns a larger number of structures.

97 MATHEMATICS AND COMPUTING↗

Correction for dynamic bias error in transmission measurements of void fraction

Dynamic bias errors occur in transmission measurements, such as X-ray, gamma, or neutron radiography or tomography. This is observed when the properties of the object are not stationary in time and its average properties are assessed. The nonlinear measurement response to changes in transmission within the time scale of the measurement implies a bias, which can be difficult to correct for. A typical example is the tomographic or radiographic mapping of void content in dynamic two-phase flow systems. In this work, the dynamic bias error is described and a method to make a first-order correction is derived. A prerequisite for this method is variance estimates of the system dynamics, which can be obtained using high-speed, time-resolved data acquisition. However, in the absence of such acquisition, a priori knowledge might be used to substitute the time resolved data. Using synthetic data, a void fraction measurement case study has been simulated to demonstrate the performance of the suggested method. The transmission length of the radiation in the object under study and the type of fluctuation of the void fraction have been varied. Significant decreases in the dynamic bias error were achieved to the expense of marginal decreases in precision.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗