SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The formation of sparingly soluble ternary Na/Mg–Np( v )–borate(s) solid phases in alkaline, dilute-to-concentrated, NaCl and MgCl 2 solutions is confirmed by a multimethod experimental approach.
Titanium and its alloys are used in the aviation and automobile industries due to their remarkable strength to weight ratio, but, commonly, machining loss is high with ~90 wt.% of the material being converted to scrap. Recycling post-consumer Ti scrap directly into solid bulk products is a potential solution for repurposing valuable material. Further, reducing or even eliminating fresh Ti sponge during recycling might lead to lower energy and greenhouse gas emissions. In this study, a solid-phase process known as friction extrusion was utilized to recycle Ti-6Al-4V machining chips into solid wires which could be used as feedstock in additive manufacturing. The friction consolidation technique was first used to convert chips with varying degrees of oxygen content into solid billets for its use as feedstock material in subsequent friction extrusion. The extrudates were fabricated above the beta transition temperature, which was achieved by selecting rotation rate and feed rate, to process the billets near 1000°C using a tungsten-lanthana extrusion die. This work presents the first occurrence of friction extruded titanium alloy wires. The effect of friction extrusion on microstructural features, tensile properties, and texture are reported. Overall, the friction extrusion method is capable of recycling Ti-6Al-4V scrap directly into extruded wire.
Abstract Localized high‐concentration electrolytes (LHCEs) have attracted interest in alkali metal batteries due to the advantages of forming stable solid‐electrolyte interphases (SEIs) on anodes and good chemical/electrochemical stability. Herein, a new degradation mechanism is revealed for ether‐based LHCEs that questions their compatibility with alkali metal anodes (Li, Na, and K). Specifically, the ether solvent reacts with alkali metals to generate solvated electrons (e s − ) that attack hydrofluoroether co‐solvents to form a series of byproducts. The ether solvent essentially acts as a phase‐transfer reagent that continuously transfers electrons from solid‐phase metals into the solution phase, thus inhibiting the formation of stable SEI and leading to continuous alkali metal corrosion. Switching to an ester‐based solvating solvent or intercalation anodes such as graphite or molybdenum disulfide has been shown to avoid such a degradation mechanism due to the absence of e s − .
Abstract Localized high‐concentration electrolytes (LHCEs) have attracted interest in alkali metal batteries due to the advantages of forming stable solid‐electrolyte interphases (SEIs) on anodes and good chemical/electrochemical stability. Herein, a new degradation mechanism is revealed for ether‐based LHCEs that questions their compatibility with alkali metal anodes (Li, Na, and K). Specifically, the ether solvent reacts with alkali metals to generate solvated electrons (e s − ) that attack hydrofluoroether co‐solvents to form a series of byproducts. The ether solvent essentially acts as a phase‐transfer reagent that continuously transfers electrons from solid‐phase metals into the solution phase, thus inhibiting the formation of stable SEI and leading to continuous alkali metal corrosion. Switching to an ester‐based solvating solvent or intercalation anodes such as graphite or molybdenum disulfide has been shown to avoid such a degradation mechanism due to the absence of e s − .
Three-dimensional (3D) structures constructed via coordination-driven self-assemblies have recently garnered increasing attention due to the challenges in structural design and potential applications. In particular, developing new strategy for the convenient and precise self-assemblies of 3D supramolecular structures is of utmost interest. Introducing the concept of self-coordination ligands, herein the design and synthesis of two meta-modified terpyridyl ligands with selective self-complementary coordination moiety are reported and their capability to assemble into two hourglass-shaped nanocages SA and SB is demonstrated. Within these 3D structures, the meta-modified terpyridyl unit preferably coordinates with itself to serve as concave part. By changing the arm length of the ligands, hexamer (SA) and tetramer (SB) are obtained respectively. In-depth studies on the assembly mechanism of SA and SB indicate that the dimers could be formed first via self-complementary coordination and play crucial roles in controlling the final structures. Moreover, both SA and SB can go through hierarchical self-assemblies in solution as well as on solid–liquid interface, which are characterized by transmission electron microscope (TEM) and scanning tunneling microscopy (STM). As a result, it is further demonstrated that various higher-order assembly structures can be achieved by tuning the environmental conditions.
The increasing interest in the use of membrane systems to desalinate inland brackish water, agricultural drainage, and industrially produced wastewater demands improved means of predicting desalination system performance under variable feedwater compositions. The interaction among water flow, solute transport, and chemical composition in these systems impacts permeate flux evolution. Here, an established multicomponent reactive transport simulator that accounts for these coupled processes is applied to compute osmotic pressure and permeate fluxes in reverse osmosis (RO) systems. The model is first validated by predicting permeate fluxes for a set of benchtop crossflow experiments subject to a range of feed flow rates and compositions, under fouling and non-fouling conditions. Results compare favorably with measured data that show that solutions with similar total dissolved solids concentrations but different compositions result in different permeate fluxes. The model is then applied to predict permeate fluxes from the desalination of produced waters using a commercial spiral wound RO module. For NaCl-dominant brines, at total dissolved salt concentrations (TDS) below about 70 g/L, permeate fluxes are inversely proportional to water mole fraction as the latter is a reasonable approximation of water activity (i.e. ideal mixing). In the case of Ca–Cl-, Na–CO3- and Na–SO4-dominant brines below about 70 g/L TDS, this relationship does not hold as well and tends to overpredict osmotic pressure and thus underpredict permeate fluxes. However, the opposite becomes true at higher TDS values for typical produced waters. The scaling potential of these waters is also computed by allowing the precipitation of minerals above their saturation limit on the RO membrane. This work demonstrates how reactive transport models developed for the analysis of waters from geological systems can be extended to improve process design, optimization, and control in desalination systems from produced waters and beyond.
In view of the widespread applications and urgent need for efficient blue emitting materials, the synthesis of such materials has seen renewed interest. In the present work, three alkyl chain-dependent blue emitting pyrene-based luminogens were synthesized and characterized. Here, the experimental results show that these luminogens exhibited high photoluminescence efficiency both in solution (>86%) and in the solid state (>35%). Interestingly, 1,3,6,8-tetrakis (pentylphenyl)pyrene (TPPy), as a photoelectric functional material, was endowed with higher quantum yield (72%) and competitiveness due to a remarkable crystallization-induced emission enhancement (CIEE) property. More importantly, TPPy exhibits high sensitivity and selectivity for ortho-nitroaniline (o-NA) with low limit of detection (9.99 × 10 -8 M), which is mainly due to the distinctive odd-even effects of the terminal alkyl chain. The results demonstrate that this type of luminogen can potentially be utilized for practical applications in the field of contaminant or explosive detection as a sensitive and portable fluorimeter.
Controlling microstructural evolution in metallic additive manufacturing (AM) is difficult, especially in producing refined as-built grains instead of coarse, directional grains. Traditional solutions involve adding inoculants to AM feedstocks, but titanium (Ti) alloys cannot employ this approach without producing detrimental secondary phases. Ti-Cu (Ti-copper) alloys offer a solution through constitutional supercooling and/or solid state thermal cycling under AM conditions. This work analyzes a compositionally graded directed energy deposition (DED) Ti-Cu build, single-melt laser tracks, and dilatometric heat treatments to evaluate if, when, and by what mechanism(s) microstructural refinement occurs. Refinement by inoculation of unmelted powder particles was also considered. Constitutional supercooling produced no net microstructural refinement as any equiaxed dendrites which form are remelted with new deposition. This finding agreed with solidification modeling of powder bed fusion-laser beam (PBF-LB) and DED builds. Solid state thermal cycling refined microstructures only during ex-situ dilatometric heat treatments, suggesting build parameter optimization is needed to achieve refinement in-situ. Accidental heterogeneous nucleation on unmelted Ti powder, originating from the different thermophysical properties of Ti and Cu, provided the most significant microstructural refinement. This work systematically assesses the microstructural refinement mechanisms of Ti-Cu in AM builds and offers insights into microstructural control in eutectoid alloys.
Rare earth elements (REEs) are essential for advanced technologies and yet face significant supply chain risks due to their concentrated global production and limited domestic availability. Addressing this challenge requires efficient processes capable of upgrading low-grade secondary resources such as mine tailings. In this study, we developed a novel separation flowsheet that integrates sequential leaching and 2-stage solvent extraction (SX) processes to recover high-purity heavy REEs (HREEs) and light REEs (LREEs) from a simulated mine-tailing concentrate containing 2.4 wt% total REEs (TREEs; 0.6 wt% LREEs and 1.8 wt% HREEs). Sequential leaching with controlled pH adjustment selectively precipitated REEs while retaining the large amount of impurities in the solution, producing an REE-enriched leachate by following leaching processes with roughly twice the REE concentration and half the impurity concentration compared to that of single-step leaching. The optimized SX flowsheet employed Cyanex 572 to extract HREEs and Fe over LREEs, followed by Fe removal using tributyl phosphate (TBP), while the raffinate stream was processed by SX with di(2-ethylhexyl)phosphoric acid (D2EHPA) to recover LREEs under optimized conditions balancing both extraction efficiency and purity. Although increased extractant availability in the organic phase improved LREE recovery, it also increased co-extraction of Ca, underscoring trade-offs in process optimization. Both HREE- and LREE-rich solutions were subsequently precipitated into solid products via oxalate precipitation, resulting in high-purity REE solids containing ∼92.0 wt% HREEs (∼95.7 wt% TREEs) and ∼92.8 wt% LREEs (∼94.0 wt% TREEs). In conclusion, this proof-of-concept study using simulated mine tailings demonstrates a promising approach for upgrading low-grade REE resources, while highlighting the need for future validation with real materials.
Two-dimensional (2D) layered nanomaterials such as graphene, molybdenum disulfide (MoS 2 ), or tungsten disulfide offer a promising solution in areas of solid-state lubrication, due to their excellent mechanical properties as well as low friction. However, defects can influence their friction and reduce their superior tribological properties. Thus, it is crucial to understand the effects of defects on sliding behavior in 2D nanomaterials, to foster a functional strategy for utilizing 2D nanomaterials as solid-state tribological films. In this study, frictional effects of defects, grain boundaries, and atomic-scale structural defects were explored on chemical vapor deposition (CVD) grown single layer MoS 2 . Selective patterning of defects into MoS 2 was accomplished via controlled irradiation of helium ions with varying ion doses. The friction of MoS 2 was characterized by friction force microscopy (FFM) and was found that friction depends on the defect formation controlled by helium ion irradiation. This approach offers a correlation between surface topography, defects and friction. Understanding the relative friction of MoS 2 in the presence of different levels of defects is foundational to studying tribological properties of a single layer MoS 2 at both nanoscales and macroscales.
Incorporation of relatively minor impurity metals onto metal (oxy)hydroxides can strongly impact solubility. In complex highly alkaline multicomponent tank waste such as that at the Hanford Nuclear Reservation, tests indicate that the surface area-normalized dissolution rate of boehmite ($γ$-AlOOH) nanomaterials is at least an order of magnitude lower than that predicted for the pure phase. In this work we examine the dissolution kinetics of boehmite coated by adsorbed Cr(III), which adheres at saturation coverages as sparse chemisorbed monolayer clusters. Using 40 nm boehmite nanoplates as a model system, temperature-dependent dissolution rates of pure versus Cr(III)-adsorbed boehmite showed that the initial rate for the latter is consistently several times lower, with an apparent activation energy 16 kJ·mol -1 higher. Although the surface coverage is only around 50%, solution analytics coupled to multimethod solids characterization reveals a phyicochemical armoring effect by adsorbed Cr(III) that substantially reduces the number of dissolution-active sites on particle surfaces. Such findings could help improve kinetics models of boehmite and/or metal ion adsorbed boehmite nanomaterials, ultimately providing a stronger foundation for the development of more robust complex radioactive liquid waste processing strategies.
We report the heterolysis of molecular hydrogen under ambient conditions by the crystalline frustrated Lewis pair (FLP) 1-{2-[bis(pentafluorophenyl)boryl]phenyl}-2,2,6,6-tetramethylpiperidine (KCAT). The gas–solid reaction provides an approach to prepare the solvent-free, polycrystalline ion pair KCATH2 through a single crystal to single crystal transformation. The crystal lattice of KCATH2 increases in size relative to the parent KCAT by approximately 2%. Microscopy was used to follow the transformation of the highly colored red/orange KCAT to the colorless KCATH2 over a period of 2 h at 300 K under a flow of H2 gas. There is no evidence of crystal decrepitation during hydrogen uptake. Inelastic neutron scattering employed over a temperature range from 4–200 K did not provide evidence for the formation of polarized H2 in a precursor complex within the crystal at low temperatures and high pressures. However, at 300 K, the INS spectrum of KCAT transformed to the INS spectrum of KCATH2. Calculations suggest that the driving force is more favorable in the solid state compared to the solution or gas phase, but the addition of H2 into the KCAT crystal is unfavorable. Ab Initio methods were used to calculate the INS spectra of KCAT, KCATH2, and a possible precursor complex of H2 in the pocket between the B and N of crystalline KCAT. Ex-situ NMR showed that the transformation from KCAT to KCATH2 is quantitative and our results suggest that the hydrogen heterolysis process occurs via H2 diffusion into the FLP crystal with a rate-limiting movement of H2 from inactive positions to reactive sites.
Binding of Lewis acidic metal ions and Brønsted acid at the metal–oxo group of high-valent metal–oxo complexes enhances their reactivities significantly in oxidation reactions. However, such a binding of Lewis acids and proton at the metal–oxo group has been questioned in several cases and remains to be clarified. In this work, we report the synthesis, characterization, and reactivity studies of a mononuclear manganese(IV)–oxo complex binding triflic acid, {[(dpaq)Mn IV (O)]–HOTf} + (1–HOTf). First, 1–HOTf was synthesized and characterized using various spectroscopic techniques, including resonance Raman (rRaman) and X-ray absorption spectroscopy/extended X-ray absorption fine structure. In particular, in rRaman experiments, we observed a linear correlation between the Mn–O stretching frequencies of 1–HOTf (e.g., ν Mn–O at ~793 cm –1 ) and 1–M n+ (Mn + = Ca 2+ , Zn 2+ , Lu 3+ , Al 3+ , or Sc 3+ ) and the Lewis acidities of H + and M n+ ions, suggesting that H+ and Mn+ bind at the metal–oxo moiety of [(dpaq)Mn IV (O)] + . Interestingly, a single-crystal structure of 1–HOTf was obtained by X-ray diffraction analysis, but the structure was not an expected Mn(IV)–oxo complex but a Mn(IV)–hydroxide complex, [(dpaq)Mn IV (OH)](OTf) 2 (4), with a Mn–O bond distance of 1.8043(19) Å and a Mn–O stretch at 660 cm –1 . More interestingly, 4 reverted to 1–HOTf upon dissolution, demonstrating that 1–HOTf and 4 are interconvertible depending on the physical states, such as 1–HOTf in solution and 4 in isolated solid. The reactivity of 1–HOTf was investigated in hydrogen atom transfer (HAT) and oxygen atom transfer (OAT) reactions and then compared with those of 1–Mn+ complexes; an interesting correlation between the Mn–O stretching frequencies of 1–HOTf and 1–M n+ and their reactivities in the OAT and HAT reactions is reported for the first time in this study.
The development of homogeneous catalysis is enabled by the availability of a rich toolkit of kinetics experiments, such as the Hgdrop test, that differentiate catalytic activity at ligand-supported metal complexes from potential heterogeneous catalysts derived from decomposition of molecular species. Metal-organic frameworks (MOFs) have garnered significant attention as platforms for catalysis at site-isolated, interstitial catalyst sites. Unlike homogeneous catalysis, relatively few strategies have been advanced to evaluate the origin of catalytic activity in MOF-promoted reactions. Many of the MOFs that have been examined as potential catalysts are comprised of molecular constituents that represent viable catalysts in the absence of the extended MOF lattice, and thus interfacial sites and leached homogeneous species represent potential sources of catalyst activity. Here, we demonstrate that analysis of deuterium kinetic isotope effects (KIEs) and olefin epoxidation diastereoselectivity provides probes of the origin of catalytic activity in MOF-promoted oxidation reactions. These analyses support involvement of lattice-based Fe sites in the turnover-limiting step of C–H activation with Fe-MOF-74-based materials (i.e., the MOF functions as a bona fide catalyst) and evidence that Cu 2 -based MOF MIL-125-Cu 2 O 2 functions as a solid-state initiator for solution-phase oxidation chemistry and is not involved in the turnover limiting step (i.e., the MOF does not function as a catalyst for substrate functionalization). furthermore, we anticipate that the simple experiments described here will provide a valuable tool for clarifying the role of MOFs in C–H oxidation reactions.
Nonlinear spectroscopy and electrokinetic measurements reveal that the electrochemical properties of a solid–liquid interface in salt solutions in propylene carbonate are dependent on the solvent chirality.
Improved methods for achieving the selective extraction of lithium salts from lithium sources, including rocky ores, salt-lake brines, and end-of-life lithium-ion batteries, could help address projected increases in the demand for lithium. Here, we report an ion pair receptor (2) capable of extracting LiCl and LiBr into an organic receiving phase both from the solid state and from aqueous solutions. Ion pair receptor 2 consists of a calix[4]pyrrole framework, which acts as an anion binding site, linked to a phenanthroline cation binding motif via ether linkages. Receptor 2 binds MgBr 2 and CaCl 2 with high selectivity over the corresponding lithium salts in a nonpolar aprotic solvent. The preference for Mg 2+ and Ca 2+ salts is reversed in polar protic media, allowing receptor 2 to complex LiCl and LiBr with high selectivity and affinity in organic media containing methanol or water. The effectiveness of receptor 2 as an extractant for LiCl and LiBr under liquid–liquid extraction (LLE) conditions was found to be enhanced by the presence of other potentially competitive salts in the aqueous source phase.
Spin-flip (SF) methods applied to excited-state approaches like the Bethe–Salpeter equation allow access to the excitation energies of open-shell systems, such as molecules and defects in solids. The eigenstates of these solutions, however, are generally not eigenstates of the spin operator S^ 2 . Even for simple cases where the excitation vector is expected to be, for example, a triplet state, the value of S^ 2 may be found to differ from 2.00; this difference is called 'spin contamination'. The expectation values S^ 2 must be computed for each excitation vector, to assist with the characterization of the particular excitation and to determine the amount of spin contamination of the state. Here, our aim is to provide for the first time in the SF methods literature a comprehensive resource on the derivation of the formulas for S^ 2 as well as its computational implementation. After a brief discussion of the theory of the SF Bethe–Salpeter equation (BSE) and some examples further illustrating the need for calculating S^ 2 , we present the derivation for the general equation for computing S^ 2 with the eigenvectors from an SF-BSE calculation, how it is implemented in a Python script, and timing information on how this calculation scales with the size of the SF-BSE Hamiltonian.
Abstract The development of efficient storage systems is one of the keys to the success of the energy transition. There are many ways to store energy, but among them, electrochemical storage is particularly valuable because it can store electrons produced by renewable energies with a very good efficiency. However, the solutions currently available on the market remain unsuitable in terms of storage capacity, recharging kinetics, durability, and cost. Technological breakthroughs are therefore expected to meet the growing need for energy storage. Within the framework of the Hydrogen Technology Collaboration Program—H 2 TCP Task-40, IEA’s expert researchers have developed innovative materials based on hydrides (metallic or complex) offering new solutions in the field of solid electrolytes and anodes for alkaline and ionic batteries. This review presents the state of the art of research in this field, from the most fundamental aspects to the applications in battery prototypes.