SEARCH · Search NASA

Results for “Sorting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

NASA NTRS1976

A description of the mechanical behavior of composite solid propellants based on molecular theory

Both the investigation and the representation of the stress-strain response (including rupture) of gum and filled elastomers can be based on a simple functional statement. Internally consistent experiments are used to sort out the effects of time, temperature, strain and crosslink density on gum rubbers. All effects are readily correlated and shown to be essentially independent of the elastomer when considered in terms of non-dimensionalized stress, strain and time. A semiquantitative molecular theory is developed to explain this result. The introduction of fillers modifies the response, but, guided by the framework thus provided, their effects can be readily accounted for.

Landel, R. F.↗

NASA NTRS1977

Gamma rays and supernova explosions

Thermal radiation associated with the explosion of supernovae is investigated. High temperature is required to produce copious gamma radiation of this sort. It appears that type 11 supernovae do not release much of their energy as gamma ray continuum radiation.

Arnett, W. D.↗

NASA NTRS1977

Introductory Remarks

Advanced transonic configurations, such as the supercritical wing, are inherently more sensitive to Reynolds number than earlier configurations because the pressure recovery gradients imposed on the boundary layer are generally steeper. The results of two-dimensional supercritical airfoil investigations and theoretical calculations show this effect. A technique for approximately simulating full-scale Reynolds number characteristics at present wind-tunnel Reynolds numbers for near-cruise conditions is described. The transition strip, which in the past has been located near the leading edge of the wing, is rearward so that the relative displacement thickness of the boundary layer at the trailing edge of the wing is the same as might be expected on a full-scale configuration with the transition near the leading edge. Two-dimensional wind-tunnel results indicate that the technique provides a very good simulation of airfoil characteristics at full-scale Reynolds number. The need for sorting the effects of Reynolds number and aeroelasticity, which can be done in the NTF, is also addressed.

Whitcomb, R.↗

NASA NTRS1976

Temperatures of the Martian surface and atmosphere - Viking observation of diurnal and geometric variations

Selected observations made with the Viking infrared thermal mapper after the first landing are reported. Atmospheric temperatures measured at the latitude of the Viking 2 landing site (48 deg N) over most of a Martian day reveal a diurnal variation of at least 15 K, with peak temperatures occurring near 2.2 hours after noon, implying significant absorption of sunlight in the lower 30 km of the atmosphere by entrained dust. The summit temperature of Arsia Mons varies by a factor of nearly two each day; large diurnal temperature variation is characteristic of the south Tharsis upland and implies the presence of low-thermal-inertia material. The thermal inertia of material on the floors of several typical large craters is found to be higher than for the surrounding terrain; this suggests that craters are somehow effective in sorting aeolian material. Brightness temperatures of the Viking 1 landing area decrease at large emissions angles; the intensity of reflected sunlight shows a more complex dependence on geometry than expected, implying atmospheric as well as surface scattering.

Kieffer, H. H.↗

NASA NTRS1977

Diameters of minor planets

The paper discusses the tremendous improvements in measurements of the asteroids since 1970, when polarimetric and radiometric methods began to replace the visual methods. A table is given which gives the sizes and albedos of 187 of the larger asteroids. When the asteroids are sorted according to albedo, they are seen to fall into two distinct groups: C-type, or carbonaceous, asteroids, with albedos of 2-5%, and a group of primarily stony or silicate bodies, the S asteroids, clustered around an albedo of 15%. The majority of the asteroids are seen to be very dark, and the maximum density in the asteroid belt must lie somewhere beyond 3.0 astronomical units.

Morrison, D.↗

NASA NTRS1977

Imaging natural materials with a quasi-microscope

A Viking lander camera with auxilliary optics mounted inside the dust post was evaluated to determine its capability for imaging the inorganic properties of granular materials. During mission operations, prepared samples would be delivered to a plate positioned within the camera's field of view and depth of focus. The auxiliary optics would then allow soil samples to be imaged with an 11 pm pixel size in the broad band (high resolution, black and white) mode, and a 33 pm pixel size in the multispectral mode. The equipment will be used to characterize: (1) the size distribution of grains produced by igneous (intrusive and extrusive) processes or by shock metamorphism, (2) the size distribution resulting from crushing, chemical alteration, or by hydraulic or aerodynamic sorting; (3) the shape and degree of grain roundness and surface texture induced by mechanical and chemical alteration; and (4) the mineralogy and chemistry of grains.

Bragg, S.↗

NASA NTRS1977

Mechanical processess affecting differentiation of protolunar material

Mechanisms prior to lunar formation are sought to account for the loss of volatiles, the depletion of iron, and the enrichment of plagioclase. Some of the same mechanisms are necessary to account for achondritic, stony-iron, and iron meteorites. Collisions seem marginally capable of providing the heat to accomplish the differentiation into iron, magnesian silicates, and plagioclase. Once this differentiation is accomplished, the subsequent mechanical history should have been sufficient to sort material according to composition in the protolunar circumterrestrial cloud. Effects operating include the correlation of body size with mechanical strength; the lesser ability of the cloud to trap the larger, denser infalling bodies; the more rapid drawing into the Earth of the larger moonlets; and the higher energy orbits for dominantly plagioclase smaller pieces broken off by collision.

Kaula, W. M.↗

NASA NTRS1978

A dual assault upon turbulence

All known calculation methods incorporate some sort of turbulence model to reduce the infinite hierarchy of equations, under Reynolds' averaging, to a finite set. All such models suffer from a certain ad hoc nature. A dual structure model was developed wherein the turbulence field is, somewhat arbitrarily, decomposed into large eddies which presumably are dominant contributors to the Reynolds' stress and small eddies which feed on the large eddies as these, in turn feed upon the average flow to gain their energy. These concepts have been developed into a dual approach, one extractive and the other predictive as outlined below.

Payne, F. R.↗

NASA NTRS1978

A note on multicyclic control by swashplate oscillation

It was shown that for two, three, or four bladed rotors, simple oscillation of the nonrotating swashplate controls can produce prescribed blade pitch schedules of the sort which were suggested for vibration alleviation. Equations were given which relate the swashplate motions to the resulting blade pitch schedules.

Biggers, J. C.↗

NASA NTRS1977

A spectral method for determining the percentage of live herbage material in clipped samples

A laboratory spectroradiometric method for the rapid determination of live/dead vegetation percentages from clipped grass samples has been developed and preliminarily tested. The method utilizes the red and photographic infrared reflectance or radiance differences between green vegetation and that of dead vegetation. Mixtures of green and dead material were found to have reflectances or radiances proportional to the percentage of green material present. This method offers the possibility that rapid live/dead spectroradiometric determinations may replace the tedious hand-sorting now generally in use for many situations.

Tucker, C. J.↗

NASA NTRS1978

Numerical experiments on the climatic sensitivity of an atmospheric hydrologic cycle

It is shown for an intermediate numerical model that fractional cloudiness and relative humidity decrease with increasing temperature. The fractional cloudiness decreases at a rate about 1 per deg K. This occurs in spite of an increase in the evaporation, water transport, condensation, precipitation and cloud water content with increasing temperature. These results are quite similar to those found from models with more highly parameterized clouds, notably the NCAR model. The fractional cloudiness in this model is measured by the fractional coverage of total cloud water and the fractional coverage of positive condensation, in addition to the relative humidity. It is also shown that some of the characteristics of a temperate climate can be simulated in an intermediate numerical model with periodic, antisymmetric and symmetric boundary conditions on an f plane. Intermediate models of this sort may therefore be useful to investigate general questions about the earth's hydrologic cycle on climatic space and time scales

Roads, J. O.↗

NASA NTRS1977

Apollo 17 ropy glasses

Ropy glasses are a major soil component in the Apollo 17 gray soils 74240 and 74260. These particles form a distinct morphological type characterized by a wide range of dynamic shapes with a diagnostic sorted and welded fine-grained debris coating. Apollo 17 ropy glasses show abundant evidence for shock. Shocked lithic and mineral inclusions, lack of any igneous textures, and lechatelierite, all indicate an impact origin. A striking similarity is observed between the lunar ropy glasses and the glass impact bombs (Flaedle) of the Ries Crater in Germany. A highland basaltic composition was observed for the Apollo 17 ropy glasses in contrast to the KREEP composition of ropy glasses from the Apollo 12 and Apollo 14 landing sites. Other workers have presented convincing evidence that ejecta from Tycho reached the Taurus-Littrow Valley, and these ropy glasses may represent Tycho ejecta. However, the close stratigraphic association of the ropy glasses with the greater than 3.5 b.y. old orange glass suggests the ropy glasses may be too old to be Tycho ejecta, which should be only about 100 m.y. old. If this is the case, the ropy glasses represent impact glasses from a very old impact in an unknown highlands source area.

Fruland, R. M.↗

NASA NTRS1975

The Rosiwal Principle and the regolithic distributions of solar-wind elements

In situ accumulation of solar elements is studied for the purpose of determining the extent of applicability of the Rosiwal Principle. The Rosiwal Principle states that the grain exposure area is proportional to the fraction of the unit volume occupied by the grains, and the test involves measurement of the relative concentrations of inert gases and reactive elements across sets of lunar fines samples for which mean grain size, sorting, and minimum radius of surface correlation are known. In some cases, the quantity of an element implanted into the lunar fines from the solar wind is found to be surface correlated, and the implications of this relationship are considered. According to the Rosiwal Principle, coarse soils should retain less inert gas than fine soil. The Principle can also be applied to species volatized or sputtered from the lunar surface and redeposited locally.

Criswell, D. R.↗

NASA NTRS1980

Automatically classifying Earth features from orbit

Solid state circuit classifies satellite imagery by spectral signature of vegetation, bare land, water, clouds, or snow. Circuit can be used to sort and separate specific imagery by signature so that only useful data is transmitted to earth. Device saves time and costs involved in manual separation of data.

Holstrom, R. L.↗

NASA NTRS1972

Computer program documentation: ISOCLS iterative self-organizing clustering program, program C094

The author has identified the following significant results. This program implements an algorithm which, ideally, sorts a given set of multivariate data points into similar groups or clusters. The program is intended for use in the evaluation of multispectral scanner data; however, the algorithm could be used for other data types as well. The user may specify a set of initial estimated cluster means to begin the procedure, or he may begin with the assumption that all the data belongs to one cluster. The procedure is initiatized by assigning each data point to the nearest (in absolute distance) cluster mean. If no initial cluster means were input, all of the data is assigned to cluster 1. The means and standard deviations are calculated for each cluster.

Minter, R. T.↗

NASA NTRS1978

Turbojet blade vibration data acquisition design and feasibility testing

A turbojet blade vibration data acquisition system was designed to allow the measurement of blade vibration. The data acquisition system utilizing 96 microprocessors to gather data from optical probes, store, sort and transmit to the central computer is described. Areas of high technical risk were identified and a two-microprocessor system was breadboarded and tested to investigate these areas. Results show that the system was feasible and that low technical risk would be involved in proceeding with the complete system fabrication.

Frarey, J. L.↗

NASA NTRS1979

NASF transposition network: A computing network for unscrambling p-ordered vectors

The viewpoints of design, programming, and application of the transportation network (TN) is presented. The TN is a programmable combinational logic network that connects 521 memory modules to 512 processors. The unscrambling of p-ordered vectors to 1-ordered vectors in one cycle is described. The TN design is based upon the concept of cyclic groups from abstract algebra and primitive roots and indices from number theory. The programming of the TN is very simple, requiring only 20 bits: 10 bits for offset control and 10 bits for barrel switch shift control. This simple control is executed by the control unit (CU), not the processors. Any memory access by a processor must be coordinated with the CU and wait for all other processors to come to a synchronization point. These wait and synchronization events can be a degradation in performance to a computation. The TN application is for multidimensional data manipulation, matrix processing, and data sorting, and can also perform a perfect shuffle. Unlike other more complicated and powerful permutation networks, the TN cannot, if possible at all, unscramble non-p-ordered vectors in one cycle.

Lim, R. S.↗

NASA NTRS1979

Experimental study of the flight envelope and research of safety requirements for hang-gliders

The flight mechanic computations were computed, providing both the flight envelopes with all sorts of limits and a fairly precise idea of the influence of several parameters, such as pilot's weight, wing settings, aeroelasticity, etc... The particular problem of luffing dives was thoroughly analyzed, and two kinds of causes were exhibited in both the rules of luffing and aeroelastic effects. The general analysis of longitudinal stability showed a strong link with fabric tension, as expected through Nielsen's and Twaites' theory. Fabric tension strongly depending upon aeroelasticity, that parameter was found to be the most effective design one for positive stability. Lateral stability was found to be very similar in all gliders except perhaps the cylindro-conical. The loss of stability happens in roll at low angle of attack, whereas it happens in yaw at high angle. Turning performance was a bit suprising, with a common maximum value of approximately 55 deg of bank angle for a steady turn.

Laburthe, C.↗