SEARCH · Search NASA

Results for “State Estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

NASA NTRS1984

Flight test results for the Digital Integrated Automatic Landing Systems (DIALS): A modern control full-state feedback design

The Digital Integrated Automatic Landing System (DIALS) is discussed. The DIALS is a modern control theory design performing all the maneuver modes associated with current autoland systems: localizer capture and track, glideslope capture and track, decrab, and flare. The DIALS is an integrated full-state feedback system which was designed using direct-digital methods. The DIALS uses standard aircraft sensors and the digital Microwave Landing System (MLS) signals as measurements. It consists of separately designed longitudinal and lateral channels although some cross-coupling variables are fed between channels for improved state estimates and trajectory commands. The DIALS was implemented within the 16-bit fixed-point flight computers of the ATOPS research aircraft, a small twin jet commercial transport outfitted with a second research cockpit and a fly-by-wire system. The DIALS became the first modern control theory design to be successfully flight tested on a commercial-type aircraft. Flight tests were conducted in late 1981 using a wide coverage MLS on Runway 22 at Wallops Flight Center. All the modes were exercised including the capture and track of steep glidescopes up to 5 degrees.

Hueschen, R. M.↗

NASA NTRS1985

Adaptive Filtering for Large Space Structures: A Closed-Form Solution

In a previous paper Schaechter proposes using an extended Kalman filter to estimate adaptively the (slowly varying) frequencies and damping ratios of a large space structure. The time varying gains for estimating the frequencies and damping ratios can be determined in closed form so it is not necessary to integrate the matrix Riccati equations. After certain approximations, the time varying adaptive gain can be written as the product of a constant matrix times a matrix derived from the components of the estimated state vector. This is an important savings of computer resources and allows the adaptive filter to be implemented with approximately the same effort as the nonadaptive filter. The success of this new approach for adaptive filtering was demonstrated using synthetic data from a two mode system.

Rauch, H. E.↗

NASA NTRS1986

Analyzing Shuttle Orbiter Trajectories

LRBET4 program best-estimated-of-trajectory (BET) calculation for post-flight trajectory analysis of Shuttle orbiter. Produces estimated measurements for comparing predicted and actual trajectory of Earth-orbiting spacecraft. Kalman filter and smoothing filter applied to input data to estimate state vector, reduce noise, and produce BET. LRBET4 written in FORTRAN IV for batch execution.

Lear, W. M.↗

NASA NTRS1985

FINDS: A fault inferring nonlinear detection system programmers manual, version 3.0

Detailed software documentation of the digital computer program FINDS (Fault Inferring Nonlinear Detection System) Version 3.0 is provided. FINDS is a highly modular and extensible computer program designed to monitor and detect sensor failures, while at the same time providing reliable state estimates. In this version of the program the FINDS methodology is used to detect, isolate, and compensate for failures in simulated avionics sensors used by the Advanced Transport Operating Systems (ATOPS) Transport System Research Vehicle (TSRV) in a Microwave Landing System (MLS) environment. It is intended that this report serve as a programmers guide to aid in the maintenance, modification, and revision of the FINDS software.

Lancraft, R. E.↗

NASA NTRS1986

Control design for robust stability in linear regulators: Application to aerospace flight control

Time domain stability robustness analysis and design for linear multivariable uncertain systems with bounded uncertainties is the central theme of the research. After reviewing the recently developed upper bounds on the linear elemental (structured), time varying perturbation of an asymptotically stable linear time invariant regulator, it is shown that it is possible to further improve these bounds by employing state transformations. Then introducing a quantitative measure called the stability robustness index, a state feedback conrol design algorithm is presented for a general linear regulator problem and then specialized to the case of modal systems as well as matched systems. The extension of the algorithm to stochastic systems with Kalman filter as the state estimator is presented. Finally an algorithm for robust dynamic compensator design is presented using Parameter Optimization (PO) procedure. Applications in a aircraft control and flexible structure control are presented along with a comparison with other existing methods.

Yedavalli, R. K.↗

NASA NTRS1985

Performance analysis of a fault inferring nonlinear detection system algorithm with integrated avionics flight data

This paper presents the performance analysis results of a fault inferring nonlinear detection system (FINDS) using integrated avionics sensor flight data for the NASA ATOPS B-737 aircraft in a Microwave Landing System (MLS) environment. First, an overview of the FINDS algorithm structure is given. Then, aircraft state estimate time histories and statistics for the flight data sensors are discussed. This is followed by an explanation of modifications made to the detection and decision functions in FINDS to improve false alarm and failure detection performance. Next, the failure detection and false alarm performance of the FINDS algorithm are analyzed by injecting bias failures into fourteen sensor outputs over six repetitive runs of the five minutes of flight data. Results indicate that the detection speed, failure level estimation, and false alarm performance show a marked improvement over the previously reported simulation runs. In agreement with earlier results, detection speed is faster for filter measurement sensors such as MLS than for filter input sensors such as flight control accelerometers. Finally, the progress in modifications of the FINDS algorithm design to accommodate flight computer constraints is discussed.

Caglayan, A. K.↗

NASA NTRS1986

An economical semi-analytical orbit theory for micro-computer applications

An economical algorithm is presented for predicting the position of a satellite perturbed by drag and zonal harmonics J2 through J4. Simplicity being of the essence, drag is modeled as a secular decay rate in the semimajor axis (retarded motion) with the zonal perturbations modeled from a modified version of Brouwers formulas. The algorithm is developed as an alternative on-board orbit predictor; a back up propagator requiring low energy consumption; or a ground based propagator for microcomputer applications (e.g., at the foot of an antenna). An O(J2) secular retarded state partial matrix (matrizant) is also given to employ with state estimation. The theory has been implemented in BASIC on an inexpensive microcomputer, the program occupying under 8K bytes of memory. Simulated trajectory data and real tracking data are employed to illustrate the theory's ability to accurately accommodate oblateness and drag effects.

Gordon, R. A.↗

NASA NTRS1985

Design of failure-accommodating multi-loop LQG regulators

This paper investigates the stability of multiloop LQ regulators when various combinations of actuator failures occur. It is proved that the closed-loop stability can be maintained under certain conditions by inserting appropriate constant gains in the control loops. The results are also applicable (via duality) to the design of state estimators which maintain stability in face of sensor failures.

Joshi, S. M.↗

NASA NTRS1986

Automated matching of pairs of SIR-B images for elevation mapping

During the SIR-B mission in October 1984, a significant number of overlapping synthetic aperture radar (SAR) images of various ground areas was collected. This has offered the first opportunity to perform stereo analyses on images from space that cover large ground areas to determine elevation information. This paper presents the preliminary results of an investigation to obtain elevation data from stereo pairs of SIR-B images. First, the accuracy with which elevation information can be derived from SIR-B image pairs is evaluated theoretically. It is shown that elevation accuracy is a function of the slant range resolution, the incidence angles with which the stereo pair is obtained, the accuracies in spacecraft state estimation, and determination of corresponding pixels in the stereo pair. Next, a hierarchical method is developed to match the corresponding pixels. This method involves iterative removal of local distortions and correlations of pairs of local neighborhoods in the two images. Since it is necessary to perform the matching at every pixel in the image, it is very computationally intensive. Therefore, it has been implemented on the Massively Parallel Processor (MPP) at the Goddard Space Flight Center (GSFC). The MPP's speed permits two iterations of this technique to operate on a pair of 512 x 512 images within 7 s. Results of applying this algorithm of SIR-B images of Mount Shasta, CA, are shown. The matching algorithm performs well in regions of the image with significant features. An approximate elevation image derived from the matching process corresponds to published topographic map data, except for certain obvious discontinuities.

Ramapriyan, H. K.↗

NASA NTRS1986

Optical processing and Space Station automation

Optical information processing research aimed at Space Station automation applications is reviewed. The emphasis of the NASA Ames Research Center program is on intelligent optical pattern recognition and optical control processing. Attention is given to the primary functions of an overall scene understanding system: distortion-invariant optical feature generation, dimensionality reduction, object classification, and contextual information processing. A method of using synthetic discriminant functions to facilitate learning in a high-speed optical correlator is described. A discussion is presented of candidate analog and digital architectures for the optical implementation of state-estimation algorithms needed for the control of high-dimension dynamic systems. The multivariate system chosen for the optical control technology demonstration - a segmented, adaptive mirror and interferometrically based wavefront sensor - is also described.

Ennis, D. J.↗

NASA NTRS1986

A methodology for designing robust multivariable nonlinear control systems

A new methodology is described for the design of nonlinear dynamic controllers for nonlinear multivariable systems providing guarantees of closed-loop stability, performance, and robustness. The methodology is an extension of the Linear-Quadratic-Gaussian with Loop-Transfer-Recovery (LQG/LTR) methodology for linear systems, thus hinging upon the idea of constructing an approximate inverse operator for the plant. A major feature of the methodology is a unification of both the state-space and input-output formulations. In addition, new results on stability theory, nonlinear state estimation, and optimal nonlinear regulator theory are presented, including the guaranteed global properties of the extended Kalman filter and optimal nonlinear regulators.

Grunberg, D. B.↗

NASA NTRS1986

COFS 1: Beam dynamics and control technology overview

The Control of Flexible Structures (COFS) 1 Project provides the invaluable opportunity to test, validate, and measure the effectiveness of theories, structural concepts, control systems, and flight certification processes for future missions through a research program focusing on multiple issues in large flexible structures, dynamics, and controls. The COFS 1 Project consists of a series of ground and flight activities building progressively from modeling and dynamic characterization of large space systems to the more complex issues of flexible-body control. The program objectives are to: determine the degree to which theory and ground testing can predict flight performance of next-generation low-frequency structures; evaluate structural fidelity of representative next-generation large deployable precision structure; assess math modeling requirements for large lightweight complex systems on which ground test results are questionable; determine degree to which scale model analysis and tests can be correlated to full-scale performance; evaluate system identification and state estimation algorithms on complex lightweight structures in the space environment; evaluate and verify controls/structures modeling capability; evaluate control laws and control systems; and evaluate damping effects in micro-g environment.

Allen, John L.↗

NASA NTRS1987

Improving stability margins in discrete-time LQG controllers

Some of the problems are discussed which are encountered in the design of discrete-time stochastic controllers for problems that may adequately be described by the Linear Quadratic Gaussian (LQG) assumptions; namely, the problems of obtaining acceptable relative stability, robustness, and disturbance rejection properties. A dynamic compensator is proposed to replace the optimal full state feedback regulator gains at steady state, provided that all states are measurable. The compensator increases the stability margins at the plant input, which may possibly be inadequate in practical applications. Though the optimal regulator has desirable properties the observer based controller as implemented with a Kalman filter, in a noisy environment, has inadequate stability margins. The proposed compensator is designed to match the return difference matrix at the plant input to that of the optimal regulator while maintaining the optimality of the state estimates as directed by the measurement noise characteristics.

Oranc, B. Tarik↗

NASA NTRS1987

Dynamic sensing of 6-axis external force and moment applied to a robot end

A dynamic force sensing method is proposed for a robot manipulator. A 6-axis wrist force sensor which is commonly used for robot force sensing does not take the direct measurement of the force and moment applied to an end effector externally from the environment of the manipulator, but takes the resultant of the gravity, the inertial force and moment on the end effector, and the external force and moment. The separation of gravitational and inertial force and moment from the measurement of the force sensor is crucial to achieving dynamically accurate force sensing and fast manipulator motion under force feedback control. A mathematical model is derived for the force sensing process and the separation of the force and moment as a nonlinear optimal state estimation problem formulated. Then an approximate solution is given using extended Kalman filtering techniques.

Yokota, Masaru Uchiyama↗

NASA NTRS1987

Multi-input multi-output system control for experimental aircraft

Results from the synthesis of control laws for an advanced short takeoff aircraft in a low-speed approach flight condition are given. Two of four candidate synthesis techniques are reported: direct eigenspace assignment and explicit model following via a linear quadratic regulator (LQR) formulation. A fundamental objective of this work is to obtain low-order feedback compensators, synthesized via the above techniques, and the judicious use of state estimation, thus allowing the use of a reasonable number of sensors for feedback.

Schmidt, David K.↗

NASA NTRS1987

Model-following output feedback controller for oblique-wing aircraft

A variable-skew oblique-wing offers a substantial aerodynamic performance advantage for aircraft missions that require both high efficiency in subsonic flight and supersonic dash or cruise. The most obvious characteristics of the oblique-wing concept is the asymmetry of the wing-skew angle that causes a significant aerodynamic and inertial cross coupling between the aircraft longitudinal and lateral-directional axes. This paper presents a technique for synthesizing a decoupling controller while providing the desired stability augmentation. The use of output feedback in control law synthesis without the requirement of state estimation is presented. An explicit model-following control system with output feedback is developed. The effectiveness of the control laws developed in achieving the desired decoupling is illustrated for a given flight condition for an oblique-wing aircraft.

Alag, Gurbux Singh↗

NASA NTRS1987

Flight test of a digital controller used in a helicopter autoland system

This paper describes the flight test evaluation of an advanced digital helicopter flight control system. The controller was designed using an optimal control design procedure for a fully coupled lateral and longitudinal vehicle model. Explicit integrals of the guidance error were included to produce a type 1 characteristic. Gain scheduling was used to account for changes in the vehicle dynamics. The digital controller was exercised by combining it with state estimators, a trajectory generator, and a closed-loop guidance algorithm to form a helicopter autoland system. A CH-47 tandem rotor helicopter was equipped with sensors, on-board digital flight computers, and electrohydraulic actuators. The system was exercised by automatically flying straight-in descending decelerating trajectories typcial of VFR manual landing approaches. A description of the test-ground facilities, the flight hardware and software, and the velocity and position tracking performance is included.

Downing, David R.↗

NASA NTRS1988

Linear-Quadratic Controller For Aiming A Large Antenna

Independent control and estimator gains selected for optimal performance. Report describes use of techniques of linear-quadratic optimal control to design digital controller aiming large antenna. Based on closed-loop concept including mathematical model of plant and independently-selectable mathematical model estimates state of system.

Nickerson, Jackson A.↗