Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface coverage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Structural, electrical and optical studies of SILAR deposited cadmium oxide thin films: Annealing effect

Successive ionic layer adsorption and reaction (SILAR) method has been successfully employed for the deposition of cadmium oxide (CdO) thin films. The films were annealed at 623 K for 2 h in an air and changes in the structural, electrical and optical properties were studied. From the X-ray diffraction patterns, it was found that after annealing, H{sub 2}O vapors from as-deposited Cd(O{sub 2}){sub 0.88}(OH){sub 0.24} were removed and pure cubic cadmium oxide was obtained. The as-deposited film consists of nanocrystalline grains of average diameter about 20-30 nm with uniform coverage of the substrate surface, whereas for the annealed film randomly oriented morphology with slight increase in the crystallite size has been observed. The electrical resistivity showed the semiconducting nature with room temperature electrical resistivity decreased from 10{sup -2} to 10{sup -3} {omega} cm after annealing. The decrease in the band gap energy from 3.3 to 2.7 eV was observed after the annealing.

36 MATERIALS SCIENCE↗

A novel approach to identify the ionomer phase in PEMFC by EELS

Proton exchange membrane fuel cells are one of the most promising technologies of energy conversion for both automotive and stationary applications, due to their ultimate cleanness and high efficiency. A critical factor, which strongly affects the fuel cell performance, is the ionomer distribution and coverage over the carbon support, since the catalysts, which are typically Pt and/or Pt-alloy nanoparticles, must be located at the carbon support/ionomer interface to catalyze the sluggish oxygen reduction reaction. However, the characterization and identification of the ionomer film, in terms of ionomer distribution and coverage over the carbon surface, is a long standing challenge. This is because the ionomer film may suffer from beam damage during the characterization, either from x-rays, neutrons or an electron beam, which causes morphological changes. In this regard, we report here a novel approach to identify and differentiate the ionomer, using the carbon signal produced by STEMEELS. Using this approach, not only the ionomer distribution, but also the carbon support distribution, can be probed at high spatial resolutions. In addition, this new approach allows us to identify ionomer-rich and carbon-support rich regions, which are quite challenging to determine using other methods.

08 HYDROGEN↗

Dynamics, Stability, and Adsorption States of Water on Oxidized RuO 2 (110)

Identifying and understanding how excess oxygen atoms affect the adsorption of water on metal oxides is crucial for their use in water splitting. Here, by means of high-resolution scanning tunneling microscopy and density-functional calculations, we show that excess oxygen atoms on the stoichiometric RuO2(110) significantly change the clustering, conformation, and deprotonation equilibrium of adsorbed water. We considered two reactive scenarios during which the stoichiometric surface was exposed to: (i) first to oxygen followed by water, and (ii) first to water followed by oxygen. In both cases the [OH-OH] complex on Ru rows is the dominant species, showing a significant difference from water-only adsorption on the stoichiometric surface in which the [OH-H2O] species is found to be prevalent. Surface reactivity at almost full O coverage is also addressed; there we show that site selectivity of the surface for H adsorption and dissociation of H2O is hindered, notwithstanding the increase of the dynamical motion of both species. We found that the work function of RuO2 can serve as a descriptor for the reactivity of this surface to water and its constituents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Turning Waste Chemicals into Wealth—A New Approach To Synthesize Efficient Cathode Material for an Li–O 2 Battery

An Li–O 2 battery requires the oxygen-breathing cathode to be highly electronically conductive, rapidly oxygen diffusive, structurally stable, and often times electrocatalytically active. Catalyst-decorated porous carbonaceous materials are the chosen air cathode in this regard. Alternatively, biomass-derived carbonaceous materials possess great ability to remove heavy and toxic metal ions from waste, forming a metal-adsorbed porous carbonaceous material. The similar structure between the air cathode and the metal-adsorbed biomass-derived carbon nicely bridges these two irrelevant areas. In this study, we investigated the electrochemical activity of a biochar material Ag-ESB directly synthesized from ethanol sludge residue in a rechargeable aprotic Li–O 2 battery. Ag ions were adsorbed from sewage and became Ag nanoparticles with uniform coverage on the biochar surface. The as-prepared material exhibits good electrochemical behavior in battery testing, especially toward the battery efficiency and cyclability. This study provides the possibility of synthetically efficient cathode material by reusing “waste” such as biofuel sludge residue. It is an economically and environmentally friendly approach both for an energy-storage system and for waste recycling.

25 ENERGY STORAGE↗

Stability and Activity of Cobalt Antimonate for Oxygen Reduction in Strong Acid

Guided by computational Pourbaix screening and high-throughput experiments aimed at the development of precious-metal-free fuel cells, we investigate rutile CoSb 2 O 6 as an electrocatalyst for oxygen reduction in 1 M sulfuric acid. Following 4 h of catalyst conditioning at 0.7 V vs RHE, operation at this potential for 20 h yielded an average current density of –0.17 mA cm –2 with corrosion at a rate of 0.04 nm hour –1 that is stoichiometric with catalyst composition. Surface Pourbaix analysis of the (111) surface identified partial H coverage under operating conditions. The Sb active site has an HO* binding free energy of 0.49 eV, which is near the peak of the kinetic 4e – ORR volcano for transition-metal oxides in acidic conditions. Furthermore, the experimental demonstration of operational stability and computational identification of a reaction pathway with favorable energetics place rutile CoSb 2 O 6 among the most promising precious-metal-free electrocatalysts for oxygen reduction in acidic media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of particle size and water coverage on the thermodynamic properties of water confined on the surface of SnO2 cassiterite nanoparticles

Inelastic neutron scattering (INS) data for SnO2 nanoparticles of three different sizes and varying hydration levels are presented. Data were recorded on five nanoparticle samples that had the following compositions: 2 nm SnO2*0.82H2O, 6 nm SnO2*0.055H2O, 6 nm SnO2*0.095H2O, 20 nm SnO2*0.072H2O, and 20 nm SnO2*0.092H2O. The isochoric heat capacity and vibrational entropy values at 298 K for the water confined on the surface of these nanoparticles were calculated from the vibrational density of states that were extracted from the INS data. This study has shown that the hydration level of the SnO2 nanoparticles influences the thermodynamic properties of the water layers and, most importantly, that there appears to be a critical size limit for SnO2 between 2 and 6 nm below which the particle size also affects these properties and above which it does not. These results have been compared with those for isostructural rutile-TiO2 nanoparticles [TiO2*0.22H2O and TiO2*0.37H2O], which indicated that water on the surface of TiO2 nanoparticles is more tightly bound and experiences a greater degree of restricted motion with respect to water on the surface of SnO2 nanoparticles. This is believed to be a consequence of the difference in chemical composition, and hence surface properties, of these metal oxide nanoparticles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Reactivity of Fe-0 Atoms, Clusters, and Nanoparticles with CC14 Multilayers on FeO(111)

The interaction of Fe0 atoms and clusters with CCl4 multilayers was investigated using a novel "atom dropping" method at 30 K over a FeO(111) thin film. Temperature programmed desorption experiments over a range of Fe0 and CCl4 coverages demonstrate a rich surface chemistry with several reaction products (C2Cl4, C2Cl6, OCCl2, CO, FeCl2, FeCl3) observed. X-ray photoelectron spectroscopy data show that the initial reactive interaction occurs spontaneously at 30 K, with the experimentally observed reaction products formed at higher temperature, in agreement with the results of theoretical calculations. The formation of OCCl2 and CO is concluded to occur through abstraction of O atoms from the generally inert FeO(111) substrate. The buffer layer assisted growth technique is used to show that the reactivity, and interestingly the reaction products, is determined by the size of Fe0 nanoparticles which interact with CCl4.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scaling relationships and theory for vibrational frequencies of adsorbates on transition metal surfaces

Adsorbate vibrational excitations are an important fingerprint of molecule/surface interactions, affecting temperature contributions to the free energy and impacting reaction rate and equilibrium constants. Furthermore, vibrational spectra aid in identifying species and adsorption sites present in experimental studies. Despite their importance, knowledge of how adsorbate frequencies scale across materials is lacking. Here, by combining previously reported experimental data and our own density-functional theory calculations, we reveal linear correlations between vibrational frequencies of adsorbates on transition metal surfaces. Through effective-medium theory, linear muffin-tin orbital theory, and the d-band model, we rationalize the squares of the frequencies to be fundamentally linear in their scaling across transition metal surfaces. We identify the adsorbate-binding energy as a descriptor for certain molecular vibrations and rigorously relate errors in frequencies to errors in adsorption energies. Here, we also discuss the impact of scaling on surface thermochemistry and adsorbate coverage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Silica-copper catalyst interfaces enable carbon-carbon coupling towards ethylene electrosynthesis

Membrane electrode assembly (MEA) electrolyzers offer a means to scale up CO 2 -to-ethylene electroconversion using renewable electricity and close the anthropogenic carbon cycle. To date, excessive CO 2 coverage at the catalyst surface with limited active sites in MEA systems interferes with the carbon-carbon coupling reaction, diminishing ethylene production. With the aid of density functional theory calculations and spectroscopic analysis, here we report an oxide modulation strategy in which we introduce silica on Cu to create active Cu-SiO x interface sites, decreasing the formation energies of OCOH* and OCCOH*—key intermediates along the pathway to ethylene formation. We then synthesize the Cu-SiO x catalysts using one-pot coprecipitation and integrate the catalyst in a MEA electrolyzer. By tuning the CO 2 concentration, the Cu-SiO x catalyst based MEA electrolyzer shows high ethylene Faradaic efficiencies of up to 65% at high ethylene current densities of up to 215 mA cm -2 ; and features sustained operation over 50 h.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of an AgS2 Complex on Ag(110)

Adsorbed sulfur has been investigated on the Ag(110) surface at two different coverages, 0.02 and 0.25 monolayers. At the lower coverage, only sulfur adatoms are present. At the higher coverage, there are additional bright features which we identify as linear, independent AgS 2 complexes. Here, this identification is based upon density functional theory (DFT) and its comparison with experimental observations including bias dependence and separation between complexes. DFT also predicts the absence of AgS 2 complexes at low coverage, and the development of AgS 2 complexes around a coverage of 0.25 monolayers of sulfur, as is experimentally observed. To our knowledge, this is the first example of an isolated linear sulfur-metal-sulfur complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of spectrally selective imaging system for negative hydrogen ion source

A spectrally selective imaging system has been developed to obtain a distribution of H{sub α} emissions at the extraction region in a hydrogen negative ion source. The diagnostic system consisted of an aspherical lens, optical filters, a fiber image conduit, and a charge coupled device detector was installed on the 1/3-scaled hydrogen negative ion source in the National Institute for Fusion Science. The center of sight line passes beside the plasma grid (PG) surface with the distance of 11 mm, and the viewing angle has coverage 35 mm from the PG surface. Two dimensional H{sub α} distribution in the range up to 20 mm from the PG surface was clearly observed. The reduction area for H{sub α} emission caused by beam extraction was widely distributed in the extraction region near the PG surface.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Goal-oriented sensitivity analysis for lattice kinetic Monte Carlo simulations

In this paper we propose a new class of coupling methods for the sensitivity analysis of high dimensional stochastic systems and in particular for lattice Kinetic Monte Carlo (KMC). Sensitivity analysis for stochastic systems is typically based on approximating continuous derivatives with respect to model parameters by the mean value of samples from a finite difference scheme. Instead of using independent samples the proposed algorithm reduces the variance of the estimator by developing a strongly correlated-“coupled”- stochastic process for both the perturbed and unperturbed stochastic processes, defined in a common state space. The novelty of our construction is that the new coupled process depends on the targeted observables, e.g., coverage, Hamiltonian, spatial correlations, surface roughness, etc., hence we refer to the proposed method as goal-oriented sensitivity analysis. In particular, the rates of the coupled Continuous Time Markov Chain are obtained as solutions to a goal-oriented optimization problem, depending on the observable of interest, by considering the minimization functional of the corresponding variance. We show that this functional can be used as a diagnostic tool for the design and evaluation of different classes of couplings. Furthermore, the resulting KMC sensitivity algorithm has an easy implementation that is based on the Bortz–Kalos–Lebowitz algorithm's philosophy, where events are divided in classes depending on level sets of the observable of interest. Finally, we demonstrate in several examples including adsorption, desorption, and diffusion Kinetic Monte Carlo that for the same confidence interval and observable, the proposed goal-oriented algorithm can be two orders of magnitude faster than existing coupling algorithms for spatial KMC such as the Common Random Number approach. We also provide a complete implementation of the proposed sensitivity analysis algorithms, including various spatial KMC examples, in a supplementary MATLAB source code.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soft chemical synthesis of silicon nanosheets and their applications

Two-dimensional silicon nanomaterials are expected to show different properties from those of bulk silicon materials by virtue of surface functionalization and quantum size effects. Since facile fabrication processes of large area silicon nanosheets (SiNSs) are required for practical applications, a development of soft chemical synthesis route without using conventional vacuum processes is a challenging issue. We have recently succeeded to prepare SiNSs with sub-nanometer thicknesses by exfoliating layered silicon compounds, and they are found to be composed of crystalline single-atom-thick silicon layers. In this review, we present the synthesis and modification methods of SiNSs. These SiNSs have atomically flat and smooth surfaces due to dense coverage of organic moieties, and they are easily self-assembled in a concentrated state to form a regularly stacked structure. We have also characterized the electron transport properties and the electronic structures of SiNSs. Finally, the potential applications of these SiNSs and organic modified SiNSs are also reviewed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Results from an improved flowing liquid lithium limiter with increased flow uniformity in high power plasmas in EAST

Significant engineering and physic progress was made by the upgrade of a flowing liquid lithium limiter (FLiLi) inserted into EAST H-mode discharges in 2016. The progress includes an improvement of liquid Li coverage uniformity, no macroscopic surface erosion by plasma materials interaction, effective removal of 55% of the discharge heat flux using high pressure He cooling during ohmic discharges, and the demonstrated ability to restart Li flow for a second experiment performed a week after the first. With increasing Li flow rate, fuel particle recycling and Fe impurity radiation gradually decreased, and plasma performance slightly improved, but there was no impact on the edge tungsten influx. No obvious Li bursts appeared during operation with up to about 4.5 MW auxiliary heating power with peak heat flux reaching ~4 MW m –2 on FLiLi. In addition, a gradual mitigation of edge localized mode (ELM) activity was observed with FLiLi operation. Lastly, short-lived ELM-free phases were observed for the first time in EAST during FLiLi insertion, with increasing τ E and transient H 98(y, 2) < 2.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Transparent Conductive Adhesives for Tandem Solar Cells

Methods of making silicon based tandem cells include wafer bonding, depositing absorber layers on the surface, and mechanical stacking. Of these, mechanically stacking after growth retains the individual cell quality during production, but typically requires a four-terminal device. We present a transparent conductive adhesive (TCA) interlayer, designed for transparency in wavelengths that Si absorbs, conductivity for out-of-plane conductivity between cells, and adhesive strength, enabling two-terminal stacked tandems. The developed TCA material is a polymer-particle blend of common transparent adhesives and metal-coated flexible microspheres, capable of bridging micro-scale gaps between uneven/textured surfaces. At 10% microsphere coverage, experimental and theoretical series resistance is compatible with high-efficiency tandem cells on silicon.

14 SOLAR ENERGY↗

The Influence of Immersion of Porous Silicon in Aqueous Solutions of Fe(NO{sub 3}){sub 3} on Photoluminescence during Long Storage

The interaction of porous silicon (PS) with aqueous solutions of Fe(NO{sub 3}){sub 3} with different molar (M) concentrations causes introduction of iron ions into silicon pores (PS–Fe), formation of adsorbed iron coatings with different thicknesses, and an increase in the stability of PS layers, which is important for development of device structures based of PS. To treat PS layers with solutions by the immersion method, it is necessary to determine how this affects the spectral composition and intensity of photoluminescence (PL), as well as the kinetics of PL changes during long storage under atmospheric conditions. Upon treatment of freshly prepared PS by immersion into in a Fe(NO{sub 3}){sub 3} aqueous solution, it was found that, after short-term storage (up to 5 days) of the PS samples, the PL intensity increases by 7.5 and 3–3.6 times at low (0.2 M) and high (0.7–0.8 M) concentrations of Fe(NO{sub 3}){sub 3}, respectively, compared to the PL intensity of an untreated PS layer. After long-term storage (4 months), the PL intensity of PS–Fe samples with concentrations of 0.1–0.2 and 0.7–0.8 M was observed to considerably increase (by 8–18 times) with unchanged position of the PL peak with respect to untreated PS. However, at the Fe(NO{sub 3}){sub 3} concentration of 0.3 М, the PL intensity decreases and the PL peak shifts to the blue, which is explained by incomplete coverage of the PS surface by an adsorbed iron layer. The kinetics of PL spectra during long-term storage is analyzed, and a model is proposed to explain the PL intensity and spectral composition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗