Search NASA⌕ Search

SEARCH · Search NASA

Results for “Surface diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Weak Gravitational Lensing of Low Surface Brightness Galaxies in the Dark Energy Year 3 Catalog

We present galaxy-galaxy lensing measurements of a sample of low surface brightness galaxies (LSBGs) drawn from the Dark Energy Survey Year 3 (Y3) data. LSBGs are diffuse galaxies with a surface brightness dimmer than the ambient night sky. Given their faintness, the use of standard observational techniques proves challenging. Weak gravitational lensing probes both the baryonic and dark matter content of galaxies, rendering it a powerful technique to estimate LSBG masses. The LSBG lens sample consists of 23, 790 total extended galaxies separated into red and blue color types at \(g-i\ge 0.60\) and \(g-i\le 0.60\), respectively. We use the Y3 \sc{metacalibration} shape catalog as the source sample, with a number density of \(5.59 \mathrm{gal}/\mathrm{arcmin}^2\). We measure the tangential shear around the lens galaxies across angular scales of \(0.25-400\) arcmin and find a signal-to-noise of 6.67 for red galaxies, 2.17 for blue galaxies, and 5.30 for the total sample. We fit a model built from two NFW profiles corresponding to the LSBG dark matter subhalo and host halo to the red LSBG shear measurements with an MCMC. We estimate the host halo mass at \(7.3 ^{+2.0}_{-1.6}\times 10^{12} M_\mathrm{\odot}\). We place a 95\% upper bound on the subhalo mass at \(3\times 10^{11} M_\mathrm{\odot}\). We utilize the lens sample photometry to obtain an estimate of the red LSBG stellar mass distribution. We compare the ratio between the stellar mass and the subhalo mass to the parameterized, satellite-specific SHMR. This work represents the first example of an attempted constraint on the masses of LSBGs using weak gravitational lensing.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The Effect of Acetylation on Iron Uptake and Diffusion in Water Saturated Wood Cell Walls and Implications for Decay

Acetylation is widely used as a wood modification process that protects wood from fungal decay. The mechanisms by which acetylation protects wood are not fully understood. With these experiments, we expand upon the literature and test whether previously observed differences in iron uptake by wood were a result of decreased iron binding capacity or slower diffusion. We measured the concentration of iron in 2 mm thick wood sections at 0, 10, and 20% acetylation as a function of time after exposure to iron solutions. The iron was introduced either strongly chelated with oxalate or weakly chelated with acetate. The concentrations of iron and oxalate in solution were chosen to be similar to those found during brown rot decay, while the concentration of iron and acetate matched previous work. The iron content of oxalate-exposed wood increased only slightly and was complete within an hour, suggesting little absorption and fast diffusion, or only slight surface adsorption. The increase in iron concentration from acetate solutions with time was consistent with Fickian diffusion, with a diffusion coefficient on the order of 10 -16 m 2 s -1 . The rather slow diffusion rate was likely due to significant binding of iron within the wood cell wall. The diffusion coefficient did not depend on the acetylation level; however, the capacity for iron absorption from acetate solution was greatly reduced in the acetylated wood, likely due to the loss of OH groups. We explored several hypotheses that might explain why the diffusion rate appears to be independent of the acetylation level and found none of them convincing. Implications for brown rot decay mechanisms and future research are discussed.

54 ENVIRONMENTAL SCIENCES↗

Weak Gravitational Lensing of Low Surface Brightness Galaxies in the DES Year 3 Catalog

We present galaxy-galaxy lensing measurements of a sample of low surface brightness galaxies (LSBGs) drawn from the Dark Energy Survey Year 3 (Y3) data. LSBGs are diffuse galaxies with a surface brightness dimmer than the ambient night sky. Given their faintness, the use of standard observational techniques proves challenging. Weak gravitational lensing probes both the baryonic and dark matter content of galaxies, rendering it a powerful technique to estimate LSBG masses. The LSBG lens sample consists of 23, 790 total extended galaxies separated into red and blue color types at \(g-i\ge 0.60\) and \(g-i\le 0.60\), respectively. We use the Y3 \metacal\ shape catalog as the source sample, with a number density of {\color{red}\(5.59 \mathrm{gal}/\mathrm{arcmin}^2\)}. We measure the tangential shear around the lens galaxies across angular scales of \(0.25-400\) arcmin and find a signal-to-noise of 6.67 for red galaxies, 2.17 for blue galaxies, and 5.30 for the total sample. W e fit a model built from two NFW profiles corresponding to the LSBG dark matter subhalo and host halo to the red LSBG shear measurements with an MCMC. We estimate the host halo mass at \(7.3 ^{+2.0}_{-1.6}\times 10^{12} M_\mathrm{\odot}\). We place a 95\% upper bound on the subhalo mass at \(2.8\times 10^{11} M_\mathrm{\odot}\). We utilize the lens sample photometry to obtain an estimate of the red LSBG stellar mass distribution. We compare the ratio between the stellar mass and the subhalo mass to the parameterized, satellite-specific SHMR \citep{Moster2010}. This work represents the first example of an attempted constraint on the masses of LSBGs using weak gravitational lensing.

79 ASTRONOMY AND ASTROPHYSICS↗

Permanent hydrophilization of outer and inner surfaces of polytetrafluoroethylene tubes using ambient air plasma generated by surface dielectric barrier discharges

We present an atmospheric pressure ambient air plasma technique developed for technically simple treatment of inner and/or outer surfaces of plastic tubes and other hollow dielectric bodies. It is based on surface dielectric barrier discharge generating visually diffuse plasma layers along the treated dielectric surfaces using water-solution electrodes. The observed visual uniformity and measured plasma rotational and vibrational temperatures of 333 K and 2350 K indicate that the discharge can be readily applied to material surface treatment without significant thermal effect. This is exemplified by the obtained permanent surface hydrophilization of polytetrafluoroethylene tubes related to the replacement of a high fraction (more than 80%) of the surface fluorine determined by X-ray photoelectron spectroscopy. A tentative explanation of the discharge mechanism based on high-speed camera observations and the discharge current and voltage of measurements is outlined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In situ transmission electron microscopy observation of ZnO polar and non-polar surfaces structure evolution under electron beam irradiation

In this paper, using in situ transmission electron microscopy, we investigated the dynamic reconstruction and evolution of ZnO polar and non-polar surfaces under high-energy electron beam irradiation. Electron beam radiolysis creates oxygen vacancies and a Zn rich (0001) surface. Positive polar charges at the (0001) surface expel loosely bonded Zn ions to diffuse away from the (0001) polar surface. As a result, mass loss was observed around the (0001) surface. Dehydration by the electron beam breaks the charge balance on the ( 000 1 ¯ ) polar surface. The negative charges on the ( 000 1 ¯ ) surface suppress the radiolysis effect and further absorb Zn ions to the surface to neutral the polar charges. The ideal stacking sequences of Zn ions in hexagonal ZnO structure can be considered as ABAB… along its c axis, while the absorbed individual Zn ion on the ( 000 1 ¯ ) surface occupies the C site to form three bonds with surface O ions beneath, instead of one bond in the ideal structure. With more Zn ion absorption and surface oxidization, new nanocrystals grow up from the ( 000 1 ¯ ) polar surface. Finally, new nanocrystals nucleated at the ( 01 1 ¯ 0 ) non-polar surface are driven by the electric field of the polar charges as well, for the Zn ions were always observed to absorb on the negatively charged [ 000 1 ¯ ] end of the newly formed ( 01 1 ¯ 0 ) surface layer.

74 ATOMIC AND MOLECULAR PHYSICS↗

Chemical states of surface oxygen during CO oxidation on Pt(1 1 0) surface revealed by ambient pressure XPS

Here, the study of CO oxidation on Pt(110) surface is revisited using ambient pressure x-ray photoemission spectroscopy. When the surface temperature reaches the activation temperature for CO oxidation under elevated pressure conditions, both the α-phase of PtO 2 oxide and chemisorbed oxygen are formed simultaneously on the surface. Due to the exothermic nature of CO oxidation, the temperature of the Pt surface increases as CO oxidation takes place. As the CO/O 2 ratio increases, the production of CO 2 increases continuously and the surface temperature also increases. Interestingly, within the diffusion limited regions, the amount of surface oxide changes little while the chemisorbed oxygen is reduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radiation-induced damage and evolution of defects in Mo

The formation of defects in bcc Mo lattice as a result of 50-keV Xe bombardment is studied via atomistic simulation with an interatomic potential developed using the force-matching ab initio based approach. The defect evolution in the cascade is described. Diffusion and interaction of interstitials and vacancies are analyzed. Only small interstitial atom clusters form directly in the cascade. Larger clusters grow only via aggregation at temperatures up to 2000 K. Stable forms of clusters demonstrate one-dimensional diffusion with a very high diffusion coefficient and escape quickly to the open surface. Point vacancies have much lower diffusivity and do not aggregate. The possibility of a large prismatic vacancy loop formation near the impact surface as a result of fast recrystallization is revealed. The mobility of the vacancy dislocation loop segments is high, however, the motion of the entire loops is strongly hindered by neighbor point defects. This paper explains the existence of the large prismatic vacancy loops and the absence of the interstitial loops in the recent experiments with ion irradiation of Mo foils.

36 MATERIALS SCIENCE↗

Ultra-Shallow Doping B, Mg, Ni, Cu, Mn, Cr and Fe into SiC with Very High Surface Concentrations Based on Plasma Stimulated Room-Temperature Diffusion

Very recently, we reported a novel doping method called plasma doping without any external bias (PDWOEB) for the introduction of some impurities into Si and GaN at room temperature (RT). In this work, the RT doping of some impurities, including B, Mg, Ni, Cu, Mn, Cr and Fe, into SiC with ultra-shallow depths of tens of nanometer and very high surface concentrations, approaching or exceeding 1E20/cm{sup 3}, by using PDWOEB is reported. It has been found for the first time that the doping depths and surface concentrations of these impurities doped into SiC by the PDWOEB increase drastically with increasing doping time and the ferromagnetism of SiC due to Ni doping is demonstrated. Moreover, the approximate diffusivities of B, Mg, Ni, Cu, Mn, Cr and Fe in SiC at RT under plasma stimulation are obtained. The physical mechanism of PDWOEB is further discussed, and some unclear viewpoints are clarified.

36 MATERIALS SCIENCE↗

Amorphization of Pseudocapacitive T−Nb 2 O 5 Accelerates Lithium Diffusivity as Revealed Using Tunable Isomorphic Architectures

Abstract Intercalation pseudocapacitance can combine capacitor‐like power densities with battery‐like energy densities. Such surface‐limited behavior requires rapid diffusion where amorphization can increase solid‐state diffusivity. Here intercalation pseudocapacitive materials with tailored extents of amorphization in T‐Nb 2 O 5 are first reported. Amorphization was characterized with WAXS, XPS, XAFS, and EPR which suggested a peroxide‐rich (O 2 2− ) surface that was consistent with DFT predictions. A series of tunable isomorphic architectures enabled comparisons while independently varying transport parameters. Through process of elimination, solid‐state lithium diffusion was identified as the dominant diffusive‐constraint dictating the maximum voltage sweep rate for surface‐limited kinetics ( v SLT ), termed the Surface‐Limited Threshold (SLT). The v SLT increased with amorphization however stable cycling required crystalline T‐Nb 2 O 5 . A current‐response model using series‐impedances well‐matched these observations. This perspective revealed that amorphization of T‐Nb 2 O 5 enhanced solid‐state diffusion by 12.2 % and increased surface‐limitations by 17.0 % (stable samples). This approach enabled retaining 95 % lithiation capacity at ∼800 mV s −1 (1,600 C‐rate equivalent).

25 ENERGY STORAGE↗

Dynamics of Phenanthrenequinone on Carbon Nano-Onion Surfaces Probed by Quasielastic Neutron Scattering

We used quasielastic neutron scattering (QENS) to study the dynamics of phenanthrenequinone (PQ) on the surface of onion-like carbon (OLC), or so called carbon onions, as a function of surface coverage and temperature. For both the high- and low-coverage samples, we observed two diffusion processes; a faster process and nearly an order of magnitude slower process. On the high-coverage surface, the slow diffusion process is of long-range translational character, whereas the fast diffusion process is spatially localized on the length scale of ~ 4.7 . On the low-coverage surface, both diffusion processes are spatially localized; on the same length scale of ~ 4.7 for the fast diffusion and a somewhat larger length scale for the slow diffusion. Arrhenius temperature dependence is observed except for the long-range diffusion on the high-coverage surface. We attribute the fast diffusion process to the generic localized in-cage dynamics of PQ molecules, and the slow diffusion process to the long-range translational dynamics of PQ molecules, which, depending on the coverage, may be either spatially restricted, or long-range. On the low-coverage surface, uniform surface coverage is not attained, and the PQ molecules experience the effect of spatial constraints on their long-range translational dynamics. Unexpectedly, the dynamics of PQ molecules on OLC as a function of temperature and surface coverage bears qualitative resemblance to the dynamics of water molecules on oxide surfaces, including practically temperature-independent residence times for the low-coverage surface. The dynamics features that we observed may be universal across different classes of surface adsorbates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Low-energy helium plasma effects on textured micro-porous tungsten

The effects of low-energy helium plasma on surface evolution and restructuring of micro-porous tungsten and tungsten-rhenium micro-engineered materials was experimentally investigated. Tungsten foam samples of 45 and 80 Pores Per Inch (PPI) of three types of textured surface architecture (nodular W, dense Re-pillars, and W-coated Re-pillars) were exposed to low-energy helium plasma at 80 and 200 eV to fluence levels of 1, 2, and 7 x 10 25 m -2 at 1123 K. The sidewalls of Re pillars exhibited surface holes due to trapped helium while their tips were found to form complex nano-scale web structures, 100's of microns across, rather than nano-tendrils (fuzz) that are often observed in flat W samples. A nano-necklace bead/string structure was observed for the first time on Re pillars, likely driven by a high density of nano-meter size helium bubbles crowded near pillar tips. W-coated Re pillars exhibited typical fuzz nanostructures seen on flat and untextured W-foam, albeit much shorter. While the height of W-fuzz was found to depend on the square root of ion fluence, the nano-web height was found to be linearly dependent on ion fluence. The fuzz was found to grow much slower on nodular foams as compared to planar tungsten, by as much as 25% slower in the W-coated Re pillar samples. Weight loss due to ion sputtering was found to be significantly reduced in nodular foam as compared to planar tungsten, but was found to be more pronounced with Re pillars. Surface coverage by nano-webs may provide insulation against plasma disruptions and act as a passive Thermal Protection System (TPS) that may be ablated during severe plasma disruptions, thus protecting the underlying surface. W-pillars or W-coated Re-pillars are found to allow trapped helium to diffuse out of the surface instead of building up sub-surface stress.

36 MATERIALS SCIENCE↗

Enhanced Stability of Pt-Cu Single-Atom Alloy Catalysts: In Situ Characterization of the Pt/Cu(111) Surface in an Ambient Pressure of CO

The interaction between a catalyst and reactants often induce changes in the surface structure and composition of the catalyst, which, in turn, affect its reactivity. Therefore, it is important to study such changes using in situ techniques under well-controlled conditions. We have used ambient pressure X-ray photoelectron spectroscopy (AP-XPS) to study the surface stability of a Pt/Cu(111) single atom alloy (SAA) in an ambient pressure of CO. By directly probing the Pt atoms, we found that CO causes a slight surface segregation of Pt atoms at room temperature. In addition, while the Pt/Cu(111) surface demonstrates poor thermal stability in UHV, where surface Pt starts to diffuse to the subsurface layer above 400 K, the presence of adsorbed CO enhances the thermal stability of surface Pt atoms. Furthermore, we also found that temperatures above 450 K cause a restructuring of the subsurface layer, which consequently strengthens the CO binding to the surface Pt sites, likely due to the presence of neighboring subsurface Pt atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Probing of Oxygen Loss from the Surface Lattice of Correlated Oxides during Hydrogen Spillover

Hydrogen spillover is a catalytic process that occurs by surface reaction and subsequent diffusion to reversibly provide a massive amount of hydrogen dopants in correlated oxides, but the mechanism at the surface of correlated oxides with metal catalyst are not well understood. Here we show that a significant amount of oxygen is released from the surface of correlated VO 2 films during hydrogen spillover, contrary to the well-established observation of the formation of hydrogen interstitials in the bulk part of VO 2 films. By using ambient-pressure X-ray photoelectron spectroscopy, we prove that the formation of surface oxygen vacancies is a consequence of a favorable reaction for the generation of weakly adsorbed H 2 O from surface O atoms that have low coordination and weak binding strength. Our results reveal the importance of in situ characterization to prove the dynamic change during redox reaction and present an opportunity to control intrinsic defects at the surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixing-induced calcite precipitation and dissolution kinetics in micromodel experiments.

Dissolved CO2 from geological CO2 sequestration may react with dissolved minerals in fractured rocks or confined aquifers and cause mineral precipitation. The overall rate of reaction can be limited by diffusive or dispersive mixing, and mineral precipitation can block pores and further hinder these processes. Mixing-induced calcite precipitation experiments were performed by injecting solutions containing CaCl2 and Na2CO3 through two separate inlets of a micromodel (1-cm x 2-cm x 40-microns); transverse dispersion caused the two solutions to mix along the center of the micromodel, resulting in calcite precipitation. The amount of calcite precipitation initially increased to a maximum and then decreased to a steady state value. Fluorescent microscopy and imaging techniques were used to visualize calcite precipitation, and the corresponding effects on the flow field. Experimental micromodel results were evaluated with pore-scale simulations using a 2-D Lattice-Boltzmann code for water flow and a finite volume code for reactive transport. The reactive transport model included the impact of pH upon carbonate speciation and calcite dissolution. We found that proper estimation of the effective diffusion coefficient and the reaction surface area is necessary to adequately simulate precipitation and dissolution rates. The effective diffusion coefficient was decreased in grid cells where calcite precipitated, and keeping track of reactive surface over time played a significant role in predicting reaction patterns. Our results may improve understanding of the fundamental physicochemical processes during CO2 sequestration in geologic formations.

54 ENVIRONMENTAL SCIENCES↗

The Importance of Surface Oxygen for Lithiation and Morphology Evolution during Calcination of High-Nickel NMC Cathodes

Nanoscale morphology has a direct impact on the performance of materials for electrochemical energy storage. Despite this importance, little is known about the evolution of primary particle morphology nor its effect on chemical pathways during synthesis. In this work, operando characterization is combined with atomic-scale and continuum simulations to clarify the relationship between morphology of cathode primary particles and their lithiation during calcination of LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC-811). This combined approach reveals a key role for surface oxygen adsorption in facilitating the lithiation reaction by promoting metal diffusion and oxidation, and simultaneously providing surface sites for lithium insertion. Furthermore, oxygen surface termination is shown to increase the activation energy for sintering, leading to smaller primary particle sizes at intermediate temperatures. Smaller particles provide both shorter diffusion lengths for lithium incorporation and increased surface site density for lithium insertion. These insights provide a foundation for more tailored syntheses of cathode materials with optimized performance characteristics.

25 ENERGY STORAGE↗