SEARCH · Search NASA

Results for “ab initio methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

DOE OSTI2016

Excited state non-adiabatic dynamics of N-methylpyrrole: A time-resolved photoelectron spectroscopy and quantum dynamics study

The dynamics of N-methylpyrrole following excitation at wavelengths in the range 241.5-217.0 nm were studied using a combination of time-resolved photoelectron spectroscopy (TRPES), ab initio quantum dynamics calculations using the multi-layer multi-configurational time-dependent Hartree method, as well as high-level photoionization cross section calculations. Excitation at 241.5 and 236.2 nm results in population of the A{sub 2}(πσ{sup ∗}) state, in agreement with previous studies. Excitation at 217.0 nm prepares the previously neglected B{sub 1}(π3p{sub y}) Rydberg state, followed by prompt internal conversion to the A{sub 2}(πσ{sup ∗}) state. In contrast with the photoinduced dynamics of pyrrole, the lifetime of the wavepacket in the A{sub 2}(πσ{sup ∗}) state was found to vary with excitation wavelength, decreasing by one order of magnitude upon tuning from 241.5 nm to 236.2 nm and by more than three orders of magnitude when excited at 217.0 nm. The order of magnitude difference in lifetimes measured at the longer excitation wavelengths is attributed to vibrational excitation in the A{sub 2}(πσ{sup ∗}) state, facilitating wavepacket motion around the potential barrier in the N–CH{sub 3} dissociation coordinate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Palladium at high pressure and high temperature: A combined experimental and theoretical study

Palladium is one of the most important technological materials, yet its phase diagram remains poorly understood. At ambient conditions, its solid phase is face-centered cubic (fcc). However, another solid phase of Pd, body-centered cubic (bcc), was very recently predicted in two independent theoretical studies to occur at high pressures and temperatures. In this work, we report an experimental study on the room-temperature equation of state (EOS) of Pd to a pressure of 80 GPa, as well as a theoretical study on the phase diagram of Pd including both fcc-Pd and bcc-Pd. Our theoretical approach consists in ab initio quantum molecular dynamics (QMD) simulations based on the Z methodology which combines both direct Z method for the simulation of melting curves and inverse Z method for the calculation of solid–solid phase transition boundaries. We obtain the melting curves of both fcc-Pd and bcc-Pd and an equation for the fcc–bcc solid–solid phase transition boundary as well as the thermal EOS of Pd which is in agreement with experimental data and QMD simulations. We uncover the presence of another solid phase of Pd on its phase diagram, namely, random hexagonal close-packed (rhcp), and estimate the location of the rhcp-bcc solid–solid phase transition boundary and the rhcp–fcc–bcc triple point. We also discuss the topological similarity of the phase diagrams of palladium and silver, the neighbor of Pd in the periodic table. We argue that Pd is a reliable standard for shock-compression studies and present the analytic model of its principal Hugoniot in a wide pressure range.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Diffusion quantum Monte Carlo approach to the polaritonic ground state

Making and using polaritonic states (i.e., hybrid electron-photon states) for chemical applications has recently become one of the most prominent and active fields that connects the communities of chemistry and quantum optics. Modeling of such polaritonic phenomena using ab initio approaches calls for new methodologies, leading to the reinvention of many commonly used electronic structure methods, such as Hartree-Fock, density functional, and coupled cluster theories. Here in this work, we explore the formally exact diffusion quantum Monte Carlo approach to obtain numerical solutions to the polaritonic ground state during the dissociation of the H 2 molecular system. Here, we examine various electron-nuclear-photon properties throughout the dissociation, such as changes to the minimum of the cavity Born-Oppenheimer surface, the localization of the electronic wave function, and the average mode occupation. Finally, we directly compare our results to that obtained with state-of-the-art, yet approximate, polaritonic coupled cluster approaches.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2021

Intertwined charge, spin, and pairing orders in doped iron ladders

Motivated by recent experimental progress on iron-based ladder compounds, we study the doped two-orbital Hubbard model for the two-leg ladder BaFe2S3. The model is constructed by using ab initio hopping parameters and the ground state properties are investigated using the density matrix renormalization group method. We show that the (π,0) magnetic ordering at half filling, with ferromagnetic rungs and antiferromagnetic legs, becomes incommensurate upon hole doping. Moreover, depending on the strength of the Hubbard U coupling, other magnetic patterns, such as (0,π), are also stabilized. We found that the binding energy for two holes becomes negative for intermediate Hubbard interaction strength, indicating hole pairing. Due to the crystal-field split among orbitals, the holes primarily reside in one orbital, with the other one remaining half filled. This resembles orbital selective Mott states. The formation of tight hole pairs continues with increasing hole density, as long as the magnetic order remains antiferromagnetic in one direction. The study of pair-pair correlations indicates the dominance of the intraorbital spin-singlet channel, as opposed to other pairing channels. Although in a range of hole doping pairing correlations decay slowly, our results can also be interpreted as corresponding to a charge density wave made of pairs, a precursor of eventual superconductivity after interladder couplings are included. Such a scenario of intertwined orders has been extensively discussed before in the cuprates, and our results suggest a similar physics could exist in ladder iron-based superconductors. Finally, we also show that a robust Hund's coupling is needed for pairing to occur.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2017

Molecular polarizability of water from local dielectric response theory

Here, we propose a fully ab initio theory to compute the electron density response under the perturbation in the local field. This method is based on our recently developed local dielectric response theory [Phys. Rev. B 92, 241107(R), 2015], which provides a rigorous theoretical framework to treat local electronic excitations in both nite and extended systems beyond the commonly employed dipole approximation. We have applied this method to study the electronic part of the molecular polarizability of water in ice Ih and liquid water. Our results reveal that the crystal field of the hydrogen-bond network has strong anisotropic effects, which significantly enhance the out-of-plane component and suppress the in-plane component perpendicular to the bisector direction. The contribution from the charge transfer is equally important, which increases the isotropic molecular polarizability by 5-6%. Our study provides new insights into the dielectric properties of water, which form the basis to understand electronic excitations in water and to develop accurate polarizable force fields of water.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Palladium at high pressure and high temperature: A combined experimental and theoretical study

Palladium is one of the most important technological materials, yet its phase diagram remains poorly understood. At ambient conditions, its solid phase is face-centered cubic (fcc). However, another solid phase of Pd, body-centered cubic (bcc), was very recently predicted in two independent theoretical studies to occur at high pressures and temperatures. In this work, we report an experimental study on the room-temperature equation of state (EOS) of Pd to a pressure of 80 GPa, as well as a theoretical study on the phase diagram of Pd including both fcc-Pd and bcc-Pd. Our theoretical approach consists in ab initio quantum molecular dynamics (QMD) simulations based on the Z methodology which combines both direct Z method for the simulation of melting curves and inverse Z method for the calculation of solid–solid phase transition boundaries. We obtain the melting curves of both fcc-Pd and bcc-Pd and an equation for the fcc–bcc solid– solid phase transition boundary as well as the thermal EOS of Pd which is in agreement with experimental data and QMD simulations. We uncover the presence of another solid phase of Pd on its phase diagram, namely, random hexagonal close-packed (rhcp), and estimate the location of the rhcp-bcc solid–solid phase transition boundary and the rhcp–fcc–bcc triple point. We also discuss the topological similarity of the phase diagrams of palladium and silver, the neighbor of Pd in the periodic table. We argue that Pd is a reliable standard for shock-compression studies and present the analytic model of its principal Hugoniot in a wide pressure range.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Ab Initio Phase Diagram of Chromium to 2.5 TPa

Chromium possesses remarkable physical properties such as hardness and corrosion resistance. Chromium is also a very important geophysical material as it is assumed that lighter Cr isotopes were dissolved in the Earth’s molten core during the planet’s formation, which makes Cr one of the main constituents of the Earth’s core. Unfortunately, Cr has remained one of the least studied 3d transition metals. In a very recent combined experimental and theoretical study (Anzellini et al., Scientific Reports, 2022), the equation of state and melting curve of chromium were studied to 150 GPa, and it was determined that the ambient body-centered cubic (bcc) phase of crystalline Cr remains stable in the whole pressure range considered. However, the importance of the knowledge of the physical properties of Cr, specifically its phase diagram, necessitates further study of Cr to higher pressure. In this work, using a suite of ab initio quantum molecular dynamics (QMD) simulations based on the Z methodology which combines both direct Z method for the simulation of melting curves and inverse Z method for the calculation of solid–solid phase transition boundaries, we obtain the theoretical phase diagram of Cr to 2.5 TPa. We calculate the melting curves of the two solid phases that are present on its phase diagram, namely, the lower-pressure bcc and the higher-pressure hexagonal close-packed (hcp) ones, and obtain the equation for the bcc-hcp solid–solid phase transition boundary. We also obtain the thermal equations of state of both bcc-Cr and hcp-Cr, which are in excellent agreement with both experimental data and QMD simulations. We argue that 2180 K as the value of the ambient melting point of Cr which is offered by several public web resources (“Wikipedia,” “WebElements,” “It’s Elemental,” etc.) is most likely incorrect and should be replaced with 2135 K, found in most experimental studies as well as in the present theoretical work.

equation of state↗

DOE OSTI2021

Characterization of the molten salt FMgNaK through ab initio molecular dynamics and experimental density measurements

The selection of a salt species for use in a molten salt reactor MSR is a key part of any MSR design. However, many salts have sparse or no thermophysical property data sets, especially those with higher melting points. One such salt is the eutectic mixture of (NaF)0.345(KF)0.59(MgF 2 )0.065, or FMgNaK, and is explored here through ab initio molecular dynamics (AIMD) simulation (1023-1273K) as well as experimental measurement of the liquid density using the Archimedean method (973-1223K). Predicted densities from AIMD are similar to experimentally-measured densities, though with more noise, suggesting that the small scale necessitated by AIMD simulations may be problematic for simulating FMgNaK in particular. Here the coefficient of thermal expansion is predicted from simulation, and salt structure is characterized. Mg-F-Mg chaining is observed in the salt network, though the low concentration of Mg inhibits chaining on the scale that is observed in (LiF) 0.67 (BeF 2 ) 0.33 , or FLiBe.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Ab initio investigation of a hypersonic double cone experiment

This article presents a direct molecular simulation (DMS) of a reactive Mach 8.2 oxygen flow over a double cone geometry. The free stream conditions and article configuration generate a flow with thermal and chemical nonequilibrium, which are common attributes of hypersonic flight. This scenario was first studied experimentally at Calspan University of Buffalo Research Center’s test facility. DMS is a particle method that uses quantum mechanically derived interaction potentials to simulate molecular collisions within a flow field. Since these interaction potentials are the only modeling inputs used in the simulation, all flow features can solely be attributed to the ab initio potential energy surfaces. Hence, providing a comparison of a hypersonic ground test and numerical data anchored to quantum mechanics. The fundamental nature of DMS is leveraged to investigate molecular level mechanisms prevalent in the flow, and comparisons with lower fidelity simulations are presented to highlight the role of these first principles calculations as benchmark solutions.

Science & Technology - Other Topics↗

DOE OSTI2016

Ab-initio study of electronic structure and elastic properties of ZrC

The electronic and elastic properties of ZrC have been investigated using the linear combination of atomic orbitals method within the framework of density functional theory. Different exchange-correlation functionals are taken into account within generalized gradient approximation. We have computed energy bands, density of states, elastic constants, bulk modulus, shear modulus, Young’s modulus, Poisson’s ratio, lattice parameters and pressure derivative of the bulk modulus by calculating ground state energy of the rock salt structure type ZrC.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1992

An accurate ab initio quartic force field for ammonia

The quartic force field of ammonia is computed using basis sets of spdf/spd and spdfg/spdf quality and an augmented coupled cluster method. After correcting for Fermi resonance, the computed fundamentals and nu 4 overtones agree on average to better than 3/cm with the experimental ones except for nu 2. The discrepancy for nu 2 is principally due to higher-order anharmonicity effects. The computed omega 1, omega 3, and omega 4 confirm the recent experimental determination by Lehmann and Coy (1988) but are associated with smaller error bars. The discrepancy between the computed and experimental omega 2 is far outside the expected error range, which is also attributed to higher-order anharmonicity effects not accounted for in the experimental determination. Spectroscopic constants are predicted for a number of symmetric and asymmetric top isotopomers of NH3.

Martin, J. M. L.↗

NASA NTRS1995

Ab Initio Studies of Fluorine and Chlorine Oxide and Nitrogen Oxide Species of Interest in Stratospheric Chemistry

The quality of fundamental vibrational frequencies determined using the CCSD(T) method (singles and doubles coupled-cluster theory plus a perturbational estimate of the effects of connected triple excitations) is shown to be very good, usually predicting band centers to within plus or minus 8 per centimeter. This approach is applied to several molecules of interest in atmospheric chemistry, such as HNO, cis-FONO, cis-ClONO, and ClOOH. The HNO molecule displays a large and unusual anharmonicity in the H-N stretch. For the calculation of ultraviolet (UV) spectra, the linear response CCSD (LRCCSD) approach (which is equivalent to EOM-CCSD) has been shown to yield vertical excitation energies that are accurate to approximately equal to 0.1 eV for singly excited electronic states. This method together with more approximate methods is used to examine the UV spectra of several molecules important in stratospheric chemistry, including HOCl, Cl2O, ClONO2, HONO2, ClOOCl, ClOOH, and HOOH.

Lee, Timothy J.↗

DOE OSTI2023

Molecular dynamics simulation of Fe-Si alloys using a neural network machine learning potential

Interatomic potential development using machine learning (ML) approaches has attracted a lot of attention in recent years because these potentials can effectively describe the structural and dynamical properties of complex materials at the atomistic level. Here, in this work, we present the development of a neural network (NN) deep ML interatomic potential for Fe-Si alloys, and we demonstrate the effectiveness of the NN-ML potential in predicting the structures and energies of liquid and crystalline phases of Fe-Si alloys in comparison with the results from ab initio molecular dynamics simulations or experimental data. The developed NN-ML potential is also used to perform molecular dynamics simulations to study the structures of Fe-Si alloys with various compositions under rapid solidification conditions. The short-ranged orders in the rapidly solidified Fe-Si alloys are also analyzed by a cluster alignment method.

36 MATERIALS SCIENCE↗

DOE OSTI2023

True molecular conformation and structure determination by three-dimensional electron diffraction of PAH by-products potentially useful for electronic applications

The true molecular conformation and the crystal structure of benzo[e]dinaphtho[2,3-a;1',2',3',4'-ghi]fluoranthene, 7,14-diphenylnaphtho[1,2,3,4-cde]bisanthene and 7,16-diphenylnaphtho[1,2,3,4-cde]helianthrene were determined ab initio by 3D electron diffraction. All three molecules are remarkable polycyclic aromatic hydrocarbons. The molecular conformation of two of these compounds could not be determined via classical spectroscopic methods due to the large size of the molecule and the occurrence of multiple and reciprocally connected aromatic rings. The molecular structure of the third molecule was previously considered provisional. These compounds were isolated as by-products in the synthesis of similar products and were at the same time nanocrystalline and available only in very limited amounts. 3D electron diffraction data, taken from submicrometric single crystals, allowed for direct ab initio structure solution and the unbiased determination of the internal molecular conformation. Detailed synthetic routes and spectroscopic analyses are also discussed. Based on many-body perturbation theory simulations, benzo[e]dinaphtho[2,3-a;1',2',3',4'-ghi]fluoranthene may be a promising candidate for triplet–triplet annihilation and 7,14-diphenylnaphtho[1,2,3,4-cde]bisanthene may be a promising candidate for intermolecular singlet fission in the solid state.

36 MATERIALS SCIENCE↗

DOE OSTI2019

Analysis of Methods of Investigation of the Vibration–Rotation Spectrum of Monomers and Dimers of Sulphur Hexafluoride Isotopes

The stability of the system of sulphur hexafluoride dimer SF{sub 6} under the action of external laser radiation has been estimated using ab initio quantum-chemical calculations of the vibration–rotation spectrum of SF{sub 6} monomers as well as homo- and heterodimers. It is noted that for simple CO molecule as an example, the most widely used method of calculations based on the Hessian matrix approach cannot serve as a reliable instrument in quantitative calculations of some molecular systems. As a potential analog, we have tested the algorithm for obtaining the vibration–rotation spectrum based on molecular dynamics data.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2019

Variational Formulation of the Generalized Many-Body Expansion with Self-Consistent Charge Embedding: Simple and Correct Analytic Energy Gradient for Fragment-Based ab Initio Molecular Dynamics

The many-body expansion (MBE) and its extension to overlapping fragments, the generalized (G)MBE, constitute the theoretical basis for most fragment-based approaches for large-scale quantum chemistry. We reformulate the GMBE for use with embedding charges determined self-consistently from the fragment wave functions, in a manner that preserves the variational nature of the underlying self-consistent field method. As a result, the analytic gradient retains the simple “sum of fragment gradients” form that is often assumed in practice, sometimes incorrectly. This obviates (without approximation) the need to solve coupled-perturbed equations, and we demonstrate stable, fragment-based ab initio molecular dynamics simulations using this technique. Energy conservation fails when charge-response contributions to the Fock matrix are neglected, even while geometry optimizations and vibrational frequency calculations may yet be accurate. Stable simulations can be recovered by means of straightforward modifications introduced here, providing a general paradigm for fragment-based ab initio molecular dynamics.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2015

Quantum Monte Carlo methods for nuclear physics

Quantum Monte Carlo methods have proved valuable to study the structure and reactions of light nuclei and nucleonic matter starting from realistic nuclear interactions and currents. These ab-initio calculations reproduce many low-lying states, moments, and transitions in light nuclei, and simultaneously predict many properties of light nuclei and neutron matter over a rather wide range of energy and momenta. The nuclear interactions and currents are reviewed along with a description of the continuum quantum Monte Carlo methods used in nuclear physics. These methods are similar to those used in condensed matter and electronic structure but naturally include spin-isospin, tensor, spin-orbit, and three-body interactions. A variety of results are presented, including the low-lying spectra of light nuclei, nuclear form factors, and transition matrix elements. Low-energy scattering techniques, studies of the electroweak response of nuclei relevant in electron and neutrino scattering, and the properties of dense nucleonic matter as found in neutron stars are also described. Furthermore, a coherent picture of nuclear structure and dynamics emerges based upon rather simple but realistic interactions and currents.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2014

Quantum Monte Carlo methods for nuclear physics

Quantum Monte Carlo methods have proved very valuable to study the structure and reactions of light nuclei and nucleonic matter starting from realistic nuclear interactions and currents. These ab-initio calculations reproduce many low-lying states, moments and transitions in light nuclei, and simultaneously predict many properties of light nuclei and neutron matter over a rather wide range of energy and momenta. We review the nuclear interactions and currents, and describe the continuum Quantum Monte Carlo methods used in nuclear physics. These methods are similar to those used in condensed matter and electronic structure but naturally include spin-isospin, tensor, spin-orbit, and three-body interactions. We present a variety of results including the low-lying spectra of light nuclei, nuclear form factors, and transition matrix elements. We also describe low-energy scattering techniques, studies of the electroweak response of nuclei relevant in electron and neutrino scattering, and the properties of dense nucleonic matter as found in neutron stars. A coherent picture of nuclear structure and dynamics emerges based upon rather simple but realistic interactions and currents.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗