Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

The demise of superfluid density in overdoped La 2-x Sr x CuO 4 films grown by molecular beam epitaxy

Here, we synthesize La 2–x Sr x CuO 4 thin films using atomic layer-by-layer molecular beam epitaxy (ALL-MBE). The films are high-quality—singe crystal, atomically smooth, and very homogeneous. The critical temperature (T c ) shows a very little (<1 K) variation within a film of 10×10 mm 2 area. The large statistics (over 2000 films) is crucial to discern intrinsic properties. We measured the absolute value of the magnetic penetration depth λ with the accuracy better than 1 % and mapped densely the entire overdoped side of the La 2–x Sr x CuO 4 phase diagram. A new scaling law is established accurately for the dependence of T c on the superfluid density. The scaling we observe is incompatible with the standard Bardeen-Cooper-Schrieffer picture and points to local pairing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Progress in durability of metal-supported solid oxide fuel cells with infiltrated electrodes

High power density and longevity are required to commercialize solid oxide fuel cells for vehicular applications. In this work, electrochemical durability of high-performance metal-supported solid oxide fuel cells (MS-SOFCs) with infiltrated catalysts is investigated. Durability screening of various cathode and anode compositions is conducted. The Pr 6 O 11 cathode and SDCN 40 (40 vol% Ni-60 vol% SDC) anode are selected due to preferential tradeoff between performance and durability. X-ray diffraction indicates the catalyst phases are stable after prolonged thermal annealing. Electrochemical impedance and scanning electron microscopy analyses show that the evolution of SDCN40 is minimal, and coarsening and Cr poisoning of the Pr 6 O 11 catalyst are the dominant degradation mechanisms. These degradation mechanisms are addressed by implementing three additional fabrication steps: (1) preoxidation of the metal support, (2) deposition of thin and protective atomic layer deposition (ALD) coatings throughout the cathode-side electrode and support, and (3) in situ pre-coarsening of the catalysts. A favorable tradeoff is achieved: the combination of the three fabrication steps reduces degradation rate at 0.7 V and 700 °C by two orders of magnitude to 2.3% kh -1 , while sacrificing 35% of initial power density. The catalyst pre-coarsening step is primarily responsible for the loss of performance.

25 ENERGY STORAGE↗

An Atomistic View of the Incipient Growth of Zinc Oxide Nanolayers

The growth of zinc oxide thin films by atomic layer deposition is believed to proceed through an embryonic step in which three-dimensional nanoislands form and then coalesce to trigger a layer-by-layer growth mode. This transient initial state is characterized by a poorly ordered atomic structure, which may be inaccessible by X-ray diffraction techniques. Here in this work, we apply X-ray absorption spectroscopy in situ to address the local structure of Zn after each atomic layer deposition cycle, using a custom-built reactor mounted at a synchrotron beamline, and we shed light on the atomistic mechanisms taking place during the first stages of the growth. We find that such mechanisms are surprisingly different for zinc oxide growth on amorphous (silica) and crystalline (sapphire) substrate. Ab initio simulations and quantitative data analysis allow the formulation of a comprehensive growth model, based on the different effects of surface atoms and grain boundaries in the nanoscale islands, and the consequent induced local disorder. From a comparison of these spectroscopy results with those from X-ray diffraction reported recently, we observe that the final structure of the zinc oxide nanolayers depends strongly on the mechanisms taking place during the initial stages of growth. Finally, the approach followed here for the case of zinc oxide will be of general interest for characterizing and optimizing the growth and properties of more complex nanostructures.

36 MATERIALS SCIENCE↗

Time- and strain-dependent nanoscale structural degradation in phase change epitaxial strontium ferrite films

Topotactic phase transition between metallic, perovskite SrFeO 3 and insulating, Brownmillerite SrFeO 2.5 has been extensively studied due to the potential applications in resistive switching devices for neuromorphic computing. However, its practical utilization as memristors has been hindered by the structural instability of SrFeO 3 , which is often ascribed to the generation of oxygen vacancies to form SrFeO 3-δ . Here we reveal the dominating defects generated in SrFeO 3 epitaxial thin films are atomic scale gaps as a result of interfacial strain. Our correlated time- and strain-dependent measurements show that tensile strained SrFeO 3 films form vertical, nanoscale gaps that are SrO-rich, which are accountable for the observed metal-to-insulator transition over time. While compressively strained or small lattice mismatched SrFeO 3 films mainly yield horizontal gaps with a smaller impact on the in-plane transport. The atomic scale origin of such defects and their impact on device performance need to be further understood in order to integrate phase change materials in oxide electronics.

36 MATERIALS SCIENCE↗

Block copolymers containing stable radical and fluorinated blocks with long-range ordered morphologies prepared by anionic polymerization

We report a facile synthetic approach to create stable radical block copolymers containing a secondary fluorinated block via anionic polymerization using a bulky, sterically hindered countercation composed of a sodium ion and di-benzo-18-crown-6 complex. The synthetic conditions described in this report allowed for controlled molecular weights and dispersity (<1.3) of both homopolymers: poly(2,2,6,6-tetramethyl-1-piperidinyloxy-methacrylate) (PTMA) and poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) as well as their block copolymers (PTMA-b-PTFEMA). The stable radical concentration of the polymers was determined by electron spin resonance (ESR) and showed radical content above 70%. An analysis of the microphase morphologies in PTMA-b-PTFEMA thin films via atomic force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS) showed clear evidence of long-range ordering of lamellar and cylindrical morphologies with 32 and 36 nm spacing, respectively. The long-range ordering of the morphologies was developed with the aid of two separate neutral layers: PTMA-ran-PTFEMA-ran-poly(hydroxyl ethyl methacrylate) (PHEMA) and poly(isobutyl methacrylate) (PiBMA)-ran-PTFEMA-ran-PHEMA, which helped us corroborate, along with the Zisman method, the surface energy estimation of PTMA to be 30.1 mJ m -2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization and investigation of the anomalous behavior of the immersed-B{sub z} diode during operation at 4 to 5 MV

The immersed-B{sub z} diode is being developed as a high-brightness, flash x-ray radiography source at Sandia National Laboratories. This diode is a foil-less electron-beam diode with a long, thin, needlelike cathode which is inserted into the bore of a solenoid. The solenoidal magnetic field guides the electron beam emitted from the cathode to the anode while maintaining a small beam radius. The electron beam strikes a thin, high-atomic-number anode and produces forward-directed bremsstrahlung. In addition, electron beam heating of the anode produces surface plasmas allowing ion emission. Two different operating regimes for this diode have been identified: A nominal operating regime where the total diode current is characterized as classically bipolar with stable impedance [see D. C. Rovang et al., Phys. Plasmas 14, 113107 (2007)] and an anomalous operating regime characterized by a rapid impedance collapse where the total diode current greatly exceeds the bipolar limit. The operating regimes are approximately separated by cathode diameters greater than 3 mm for the nominal regime and less than 3 mm for the anomalous impedance collapse regime. Results from a comprehensive series of experiments conducted at 4-5 MV characterizing the transition from this nominal operating regime to the anomalous operating regime as the cathode diameter is reduced are presented. Results from experiments investigating the effects of anode-cathode gap, anode material, and cryogenic modification of the anode surface are also presented. Although these investigations were unsuccessful in completely mitigating the anomalous behavior, insight gained from these experiments has elucidated several key physics issues that are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma-assisted atomic layer deposition of TiN/Al{sub 2}O{sub 3} stacks for metal-oxide-semiconductor capacitor applications

By employing plasma-assisted atomic layer deposition, thin films of Al{sub 2}O{sub 3} and TiN are subsequently deposited in a single reactor at a single substrate temperature with the objective of fabricating high-quality TiN/Al{sub 2}O{sub 3}/p-Si metal-oxide-semiconductor capacitors. Transmission electron microscopy and Rutherford backscattering spectroscopy analyses show well-defined interfaces and good Al{sub 2}O{sub 3} stoichiometry, respectively. Electrical investigation of as-deposited test structures demonstrates leakage current densities as low as approx1 nA/cm{sup 2}. Current-voltage (I-V) measurements demonstrate clear Fowler-Nordheim tunneling with an average TiN/Al{sub 2}O{sub 3} barrier height of 3.3 eV. Steep Weibull distributions of the breakdown electric field around 7.5 MV/cm indicate good reliability of these devices. Time-dependent dielectric breakdown measurements demonstrate that the devices can sustain high operating electric fields of 3-4 MV/cm for the 10 year lifetime criterion. From capacitance-voltage (C-V) measurements, a dielectric constant (k) of 8.7+-0.1 was extracted for the Al{sub 2}O{sub 3}. No direct dependence on the deposition temperature was found in the range 350-400 deg. C, although the stack deposited at 400 deg. C demonstrates significantly lower C-V hysteresis of approx50 mV. A negative fixed oxide charge density of (9.6+-0.2)x10{sup 12} cm{sup -2} was found to be present at the Al{sub 2}O{sub 3}/p-Si interface.

36 MATERIALS SCIENCE↗

A new era in ferroelectrics

Topological structures in ferroic materials have drawn great interest in recent years due to the richness of the underlying physics and the potential for applications in next generation electronics. Recent advances in atomically precise thin-film materials synthesis and characterization of structural/physical phenomena at unprecedented length/energy/time scales have enabled us to study exotic phases and their associated physics [Rößler et al., Nature 442, 797 (2006); S. Das, Nature 568, 368 (2019); Yadav et al., Nature 530, 198 (2016); and Stoica et al., Nat. Mater. 18, 377 (2019)]. It is appropriate that, in the second century of ferroelectrics, some dramatic discoveries are propelling the field into directions heretofore unimaginable. In this review, we explore the recent progress in ferroelectric-oxide superlattices in which researchers can control structure and physical properties through the application of epitaxial strain, layer thickness, temperature, electric field, etc. We provide a discussion of exotic topological structures (e.g., closure domains, vortices, polar skyrmions, and other exotic phases) and associated functionalities in ferroelectric/paraelectric superlattices. We conclude with a brief overview of and prospects for how the field may evolve in the coming years.

36 MATERIALS SCIENCE↗

Inelastic Neutron Scattering As an Indication of a New Type of Gapped Surface Excitations in Liquid He

We analyze the experimental data [1] on inelastic neutron scattering by a thin 5-atomic-layer film of liquid helium at three different temperatures: T = 0.4, 0.98, and 1.3 K. These data were partially published previously [2–4], but here we present them in a better quality and at various temperatures. The neutron scattering intensity plots, in addition to the previously know dispersion of phonons and ripplons, suggest a branch of gapped surface excitations with activation energy ~4.5 K and the dispersion similar to that expected for surfons—the bound quantum states of helium atoms above liquid helium surface, proposed and investigated theoretically [5, 6]. These data, probably, provide the first direct experimental confirmation of surfons. Before these surface excitations received only indirect experimental substantiation, based on the temperature dependence of surface tension coefficient [5, 6] and on their interaction with surface electrons [7, 8]. The existence of surfons as an additional type of surface excitations, although being debated yet, is very important for various physical properties of He surface. We also analyze previous numerical results on excitations in liquid helium and argue that surface excitations similar to surfons have been previously obtained by numerical calculations and called resonance interface states [21].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Geant4 based positron beam source (GPos) v1.0

GPos is a software that was created to determine the properties of positron beams resulting from the interaction of the LBNL BELLA center PetaWatt laser-driven plasma-capillary accelerated electron beam and the atoms of a thin solid target. GPos is written in C++, easily compiled with cmake and the spack package manager, which allows for multi-thread and MPI parallel computing. Its functions expand on the Geant4 toolkit library and allow for propagation of the modelled particles through vacuum drift distances with a focusing element (thin lens approximation). Users can change beam-foil-drift-lens parameters - to adapt GPos to other particle sources and infrastructures - in a simple input file. The code particle data output format, openPMD, which is compatible, for example, with the input of the ECP WarpX project code used to explore the physics of particle acceleration in plasmas. Using GPos in conjunction to WarpX allowed us to test various configurations for designing a high-quality and high-energy positron source at BELLA -required for us to address positron acceleration challenges in the development of future linear colliders. GPos can also be advantageous when tackling the physics of muon sources for future muon colliders as well as for the investigation of positron sources in lower energy regimes for applications like annihilation spectroscopy and astrophysical gamma-ray-bursts.

Pinto de Almeida Amorim, Ligia↗

Developing a Facile Technology for Converting Domestic US Coal into High-Value Graphene

Universal Matter Ltd. was formed in July 2019 to scale-up and commercialize a breakthrough process, Flash Joule Heating (FJH), to transform different coal grades, into high-quality graphene. This graphene is made using a high-voltage electric discharge that brings the carbon source to temperatures higher than 3,000 K in less than 10 milliseconds. The short burst of electricity breaks all chemical bonds in the feedstock and reorders the carbon atoms into exceptionally thin layers of a special type of graphene, at an estimated $100 per ton in electricity cost. This process is capable of producing 1-5 layer-thick high-quality graphene (with defects of <0.05% and purity of >99%) in a green, practical, and cost-effective process. The graphene produced in the FJH process is a very special kind of graphene called “turbostratic graphene” (TG). TG offers superior physical properties compared to other graphene structures on a similar weight basis. Unlike graphene made from graphite using traditional techniques, the graphene layers in TG stack in an irregular pattern that allows the graphene powder to be exfoliated more easily and blend more evenly within other materials. The TG produced using our FJH technology is the most economical graphene product that opens up significant large volume markets for end-use applications; it would allow the use of TG made from coal for commercial applications in several market segments including energy storage, sensors, hyper-lubricants, reinforced plastics, and building materials such as concrete.

01 COAL, LIGNITE, AND PEAT↗

An atomic layer deposition chamber for in situ x-ray diffraction and scattering analysis

The crystal structure of thin films grown by atomic layer deposition (ALD) will determine important performance properties such as conductivity, breakdown voltage, and catalytic activity. We report the design of an atomic layer deposition chamber for in situ x-ray analysis that can be used to monitor changes to the crystal structural during ALD. The application of the chamber is demonstrated for Pt ALD on amorphous SiO{sub 2} and SrTiO{sub 3} (001) using synchrotron-based high resolution x-ray diffraction, grazing incidence x-ray diffraction, and grazing incidence small angle scattering.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Atomic scale control of catalytic process in oxidation of Pb thin films

Using scanning tunneling microscopy (STM), we demonstrate that oxidation on Pb films is greatly enhanced by atomic Cs catalysts. With only a minute concentration of isolated Cs substitutional atoms in the surface layer (0.004 ML coverage), surface oxidation rates are greatly enhanced. First-principles density functional theory (DFT) calculations reveal that a substitutional Cs atom strongly increases O2 binding on the surface. Then, with additional oxygen exposure this substitutional Cs-initiated oxidation process results in growth of PbO layers in an auto-catalytic manner. Furthermore, we investigate the role of temperature in the oxidation of the Pb films with and without Cs, and we explore the overall morphology of the resultant oxide layers.

Kim, Jisun↗

Effect of Mn concentration and atomic structure on the magnetic properties of Ge thin films

This work reports on the magnetic properties of Ge{sub 100-x}Mn{sub x} (x=0-24 at. %) films prepared by cosputtering a Ge+Mn target and submitted to cumulative thermal annealing treatments up to 500 deg. C. Both as-deposited and annealed films were investigated by means of compositional analysis, Raman scattering spectroscopy, magnetic force microscopy, superconducting quantum interference device magnetometry, and electrical resistivity measurements. All as-deposited films (either pure or containing Mn) exhibit an amorphous structure, which changes to crystalline as the annealing treatments are performed at increasing temperatures. In fact, the magnetic properties of the present Ge{sub 100-x}Mn{sub x} films are very sensitive to the Mn content and whether their atomic structure is amorphous or crystalline. More specifically: whereas the amorphous Ge{sub 100-x}Mn{sub x} films (with high x) present a characteristic spin glass behavior at low temperature; after crystallization, the films (with moderate Mn contents) are ferromagnetic at room temperature. Moreover, the magnetic behavior of the films scales with their Mn concentration and tends to be more pronounced after crystallization. Finally, the semiconducting behavior of the films, experienced by previous optical studies, was confirmed through electrical measurements, which also indicate the dependence of the resistivity with the atomic composition of the films.

36 MATERIALS SCIENCE↗

Mechanistic study of atomic layer deposition of Al{sub x}Si{sub y}O thin film via in-situ FTIR spectroscopy

A study of surface reaction mechanism on atomic layer deposition (ALD) of aluminum silicate (Al{sub x}Si{sub y}O) was conducted with trimethylaluminum (TMA) and tetraethoxysilane (TEOS) as precursors and H{sub 2}O as the oxidant. In-situ Fourier transform infrared spectroscopy (FTIR) was utilized to elucidate the underlying surface mechanism that enables the deposition of Al{sub x}Si{sub y}O by ALD. In-situ FTIR study revealed that ineffective hydroxylation of the surface ethoxy (–OCH{sub 2}CH{sub 3}) groups prohibits ALD of SiO{sub 2} by TEOS/H{sub 2}O. In contrast, effective desorption of the surface ethoxy group was observed in TEOS/H{sub 2}O/TMA/H{sub 2}O chemistry. The presence of Al-OH* group in vicinity of partially hydroxylated ethoxy (–OCH{sub 2}CH{sub 3}) group was found to propagate disproportionation reaction, which results in ALD of Al{sub x}Si{sub y}O. The maximum thickness from incorporation of SiO{sub x} from alternating exposures of TEOS/H{sub 2}O chemistry in Al{sub x}Si{sub y}O was found to be ∼2 Å, confirmed by high resolution transmission electron microscopy measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗