Search NASA⌕ Search

SEARCH · Search NASA

Results for “circularity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Conductive Ink with Circular Life Cycle for Printed Electronics

Electronic waste carries energetic costs and an environmental burden rivaling that of plastic waste due to the rarity and toxicity of the heavy-metal components. Recyclable conductive composites are introduced for printed circuits formulated with polycaprolactone (PCL), conductive fillers, and enzyme/protectant nanoclusters. Circuits can be printed with flexibility (breaking strain ≈80%) and conductivity (≈2.1 × 10 4 S m -1 ). These composites are degraded at the end of life by immersion in warm water with programmable latency. Approximately 94% of the functional fillers can be recycled and reused with similar device performance. The printed circuits remain functional and degradable after shelf storage for at least 7 months at room temperature and one month of continuous operation under electrical voltage. Here, the present studies provide composite design toward recyclable and easily disposable printed electronics for applications such as wearable electronics, biosensors, and soft robotics.

36 MATERIALS SCIENCE↗

Aggregation‐Induced Emission and Circularly Polarized Luminescence Duality in Tetracationic Binaphthyl‐Based Cyclophanes

Abstract Here, we report an approach to the synthesis of highly charged enantiopure cyclophanes by the insertion of axially chiral enantiomeric binaphthyl fluorophores into the constitutions of pyridinium‐based macrocycles. Remarkably, these fluorescent tetracationic cyclophanes exhibit a significant AIE compared to their neutral optically active binaphthyl precursors. A combination of theoretical calculations and time‐resolved spectroscopy reveal that the AIE originates from limited torsional vibrations associated with the axes of chirality present in the chiral enantiomeric binaphthyl units and the fine‐tuning of their electronic landscape when incorporated within the cyclophane structure. Furthermore, these highly charged enantiopure cyclophanes display CPL responses both in solution and in the aggregated state. This unique duality of AIE and CPL in these tetracationic cyclophanes is destined to be of major importance in future development of photonic devices and bio‐applications.

Garci, Amine↗

A Hydrogen Iron Flow Battery with High Current Density and Long Cyclability Enabled Through Circular Water Management

The hydrogen‐iron (HyFe) flow cell has great potential for long‐duration energy storage by capitalizing on the advantages of both electrolyzers and flow batteries. However, its operation at high current density (high power) and over continuous cycling testing has yet to be demonstrated. In this paper, we discuss our design and demonstration of a water management strategy that supports high current and long cycling performance of a HyFe flow cell. Water molecules associated with the movement of protons from the iron electrode to the hydrogen electrode are sufficient to hydrate the membrane and electrode at a low current density of 100 mA cm −2 during the charge process. At higher charge current density, more aggressive measures must be taken to counter back‐diffusion driven by the acid concentration gradient between the iron and hydrogen electrodes. Our water management approach is based on water vapor feeding in the hydrogen electrode, and water evaporation in the iron electrode, thus enabling the high current density operation of 300 mA cm −2 .

25 ENERGY STORAGE↗

A Hydrogen Iron Flow Battery with High Current Density and Long Cyclability Enabled Through Circular Water Management

The hydrogen‐iron (HyFe) flow cell has great potential for long‐duration energy storage by capitalizing on the advantages of both electrolyzers and flow batteries. However, its operation at high current density (high power) and over continuous cycling testing has yet to be demonstrated. In this article, we discuss our design and demonstration of a water‐management strategy that supports high current and long‐cycling performance of a HyFe flow cell. Water molecules associated with the movement of protons from the iron electrode to the hydrogen electrode are sufficient to hydrate the membrane and electrode at a low current density of 100 mA cm −2 during the charge process. At higher charge current density, more aggressive measures must be taken to counter back‐diffusion driven by the acid concentration gradient between the iron and hydrogen electrodes. Our water‐management approach is based on water vapor feeding in the hydrogen electrode and water evaporation in the iron electrode, thus enabling high current density operation of 300 mA cm −2 .

Yan, Litao↗

Solventless Dual‐Cure Liquid Resins Via Circular Use of Phthalic Anhydride for Recyclable Composite Applications

Abstract Fiber‐reinforced composites (FRCs) possess a remarkable strength‐to‐weight ratio, making them ideal light‐weighing alternative materials of metals used in automotive, aerospace, and outdoor equipment applications, but their recycling is challenging. Chemically recyclable thermoset polymers can enable fiber recovery and reuse; however, challenges remain in the separation and purification of depolymerized small molecules for efficient polymer recycling. To this end, a series of liquid resins for chemically recyclable polymer networks is designed based on phthalic anhydride, a widely produced and inexpensive chemical. The straightforward sublimation of phthalic anhydride is leveraged to enable a simple and efficient separation process for polymer recycling. To liquefy phthalic anhydride, five mono‐acryloyl‐phthalates are synthesized to obtain stable liquid resins together with phthalic diglycidyl ester. These liquid resins undergo dual‐cure reactions that comprise photopolymerization of acrylate and, subsequently, heat‐mediated epoxy‐acid polymerization reactions. These liquid resins exhibit moderate viscosities (2600–6400 cP @ 22 °C), fast curing, and robust thermomechanical properties (T g s from 71 to 116 °C). It is demonstrated that hydrolysis of the dual‐cured polymers completes within 2 h at 80 °C, and direct sublimation produces phthalic anhydride with 82% yield. This resin system is expected to provide a cost‐competitive, highly efficient platform for recyclable FRCs.

Polymer Science↗

Heat-Exchange in One-Phase Liquid-Metal Flows: Databank (Temperature Distribution in Circular Pipes)

In order to develop accurate methods of calculating heat-exchange in forced channel flows, it is necessary to have knowledge about the temperature distribution over the cross section in differ layers of the flow. For ordinary liquids (gas, water, where the Prandtl number Pr ~ 1), such measurements are difficult to perform because of the small thickness of the boundary layer. The problem simplifies for liquid metals, where Pr << 1. This article contains the format of the data as well as an analysis of the primary data from 37 home and foreign works (mercury, sodium-potassium alloy, sodium, lithium, lead-bismuth alloy). The data are presented in electronic form.

42 ENGINEERING↗

Self-focusing of pseudo-nondiffracting laser beams with circular symmetry in collisional plasma under two ramp density profiles

The self-focusing of zeroth-order Bessel–Gaussian beams through plasma under exponential and tangential ramp density profiles is investigated theoretically by using Wentzel–Kramers–Brillouin approximation. To examine the effect of plasma density ramp on self-focusing of the studied beams, the evolution of beam-width parameter with normalized propagation distance is reported for diverse laser beams and plasma parameters. The results reveal that stronger self-focusing is obtained with exponential ramp density profile as compared to the tangential density ramp one.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modeling the hydro-mechanical responses of strip and circular punch loadings on water-saturated collapsible geomaterials

A stabilized enhanced strain finite element procedure for poromechanics is fully integrated with an elasto-plastic cap model to simulate the hydro-mechanical interactions of fluid-infiltrating porous rocks with associative and non-associative plastic flow. We present a quantitative analysis on how macroscopic plastic volumetric response caused by pore collapse and grain rearrangement affects the seepage of pore fluid, and vice versa. Results of finite element simulations imply that the dissipation of excess pore pressure may significantly affect the stress path and thus alter the volumetric plastic responses.

58 GEOSCIENCES↗

Design of Circular, Square, Single, and Multi-layer Induction Coils for Electromagnetic Priming Using Inductance Estimates

Special induction coils used for electro magnetic priming of ceramic foam filters in liquid metal filtration have been designed using a combination of analytical and finite element modeling. Relatively simple empirical equations published by Wheeler in 1928 and 1982 have been used during the design process. The equations were found to accurately predict the z-component of the magnetic flux densities of both single- and multi-layer coils as verified both experimentally and by using COMSOL{sup ®} 5.1 multiphysics simulations.

36 MATERIALS SCIENCE↗

A Novel Rotating Flexure-Test Technique for Brittle Materials with Circular Geometries

The four-point bend test is one of the simplest and often the preferred flexural strength evaluation method for brittle materials. In this loading mode, fracture often initiates from a critical surface (or subsurface) flaw when subjected to a tensile stress state. However, if the critical flaw exists on the compression side of the test specimen, it may not activate to grow a crack and hence the resulting flexural strength will be higher than the true value. The goal of this study is to measure the true flexural strength of a solid or hollow cylindrical brittle specimen by ensuring that failure occurs at its weakest point by rotating along its longitudinal axis, thereby exposing and activating its critical surface flaw during a four-point bend test. A novel test fixture has been designed and fabricated, and the true flexural strengths of cylindrical brittle and quasi-brittle tubular specimens have been measured and compared to existing experimental data obtained through traditional four-point bend tests. In this work, experimental results showcase the orientation dependance on flexural strength for various materials. Additionally, similarities between experimental findings and those available in literature, including observations of fracture surfaces and relationships between surface roughness and material strength, are discussed.

36 MATERIALS SCIENCE↗

Identification of aberrant circular RNA expression and its potential clinical value in primary great saphenous vein varicosities

Highlights: • This study identified 232 significantly aberrant circRNAs in primary great saphenous vein varicosities (PGSVVs). • A circRNA-miRNA-gene co-expression network was created. • Hsa{sub c}irc{sub 0}006427, hsa{sub c}irc{sub 0}089810 and hsa{sub c}irc{sub 0}005267 might be potential biological markers for PGSVVs. This study aimed to identify aberrant circRNA expression in primary great saphenous vein varicosities (PGSVVs) and investigate its potential clinical significance. High-throughput sequencing was applied to analyze the differential expression of circRNAs in three paired vein samples of PGSVVs and a control group. Computational bioinformatics analyses, including gene ontology (GO) analysis and encyclopedia of genes and genomes (KEGG) pathway analysis, were performed to further enrich microRNA data. Real-time quantitative reverse transcription-polymerase chain reaction (qRT-PCR) was used to verify the selected aberrant circRNAs in all vein samples, and a receiver operating characteristic (ROC) curve was plotted to evaluate the diagnostic and potential clinical significance. A total of 232 circRNAs were significantly aberrantly expressed in PGSVVs, including 105 and 127 upregulated and downregulated circRNAs, respectively. The predicted top 10 downstream miRNAs of the significantly altered circRNAs are hsa-miR-103a-2-5p, hsa-miR-141-5p, hsa-miR-3692-5p, hsa-miR-4659a-3p, hsa-miR-4659b-3p, hsa-miR-4691-5p, hsa-miR-4778-3p, hsa-miR-6738-3p, hsa-miR-6792-3p and hsa-miR-6873-3p. GO analysis revealed that the most enriched and meaningful biological process, cellular component, and molecular function terms were related to the regulation of catabolic processes, the cytoplasm and ATP binding, respectively. The most enriched and meaningful pathways revealed by KEGG pathway analysis were related to “axon guidance” “vitamin digestion and absorption” and “NF-Kappa B signaling pathway”. Hsa{sub c}irc{sub 0}006427 (P = 0.007), hsa{sub c}irc{sub 0}089810 (P = 0.044) and hsa{sub c}irc{sub 0}005267 (P = 0.049) were significantly downregulated in the PGSVV group relative to their expression levels in the control group, and the area under the ROC curve was 0.9091, 0.8025 and 0.8148, respectively. This study demonstrated that circRNAs were differentially expressed in PGSVVs, and highlights the crucial roles of circRNAs in the pathogenesis of PGSVVs and indicates that hsa{sub c}irc{sub 0}006427, hsa{sub c}irc{sub 0}089810 and hsa{sub c}irc{sub 0}005267 might be potential diagnostic and clinical biological markers.

60 APPLIED LIFE SCIENCES↗

Association of circular Klotho and insulin-like growth factor 1 with cardiac hypertrophy indexes in athlete and non-athlete women following acute and chronic exercise

Highlights: • Acute and chronic exercises have a stimulatory effect on plasma IGF-I and Klotho. • Plasma IGF-I has an association with exercise-induced cardiac hypertrophy especially LVEDDI and LVMI. • Klotho acts as a negative regulator for exercise-induced cardiac hypertrophy most probably through modulating IGF-I effect. Owing to the role of insulin-like growth factor 1 (IGF-I) in cardiac hypertrophy and the ability of Klotho in inhibiting the IGF-I action, we investigated effects of exercise on plasma Klotho and IGF-I and their association with cardiac hypertrophy. In this study, 10 non-athlete and 10 athlete women underwent a Bruce test (acute exercise) and 12-weeks water aerobics training (chronic exercise). Electrocardiographic parameters, plasma IGF-I and Klotho levels were measured in different time courses. The exercise training could significantly increase left ventricular end-diastolic diameter index (LVEDDI) in the non-athletes. Plasma levels of IGF-I significantly increased following acute and chronic exercises. The Klotho levels at the baseline were higher in athletes than non-athletes and its levels significantly increased immediately after acute exercise in both groups. The Klotho levels significantly decreased in non-athletes 24 h after chronic exercise, but its level was still higher than the baseline in the athletes. We found positive and negative correlations between cardiac hypertrophy indexes (LVEDDI and left ventricular mass index) with respectively IGF-I and Klotho. In conclusion, we found a stimulatory effect of acute and chronic exercises on plasma IGF-I and Klotho and association of IGF-I with exercise-induced cardiac hypertrophy. Moreover, Klotho could act as a negative regulator for exercise-induced cardiac hypertrophy.

60 APPLIED LIFE SCIENCES↗

Plastic waste upcycling toward a circular economy

Large amounts of plastics are discarded worldwide each year, leading to a significant mass of waste in landfills and pollution to soil, air, and waterways. Upcycling is an efficient way to transform plastic waste into high-value products and can significantly lessen the environmental impact of plastic production/consumption. In this article, current advances and future directions in plastic waste upcycling technologies are discussed. In particular, this review focuses on the production of high-value materials from plastic waste conversion methods, including pyrolysis, gasification, photoreforming, and mechanical reprocessing. Plastic waste compositions, conversion products, reaction mechanisms, catalyst selection, conversion efficiencies, polymer design, and polymer modification are also explored. Furthermore, the main challenges facing the adoption and scale-up of these technologies are highlighted. Suggestions are given for focusing future research and development to increase the efficiency of upcycling practices.

30 DIRECT ENERGY CONVERSION↗