Search NASA⌕ Search

SEARCH · Search NASA

Results for “conduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Size- and Temperature-Dependent Suppression of Phonon Thermal Conductivity in Carbon Nanotube Thermoelectric Films

Heat transport in nanoscale carbon materials such as carbon nanotubes and graphene is normally dominated by phonons. Here, measurements of in-plane thermal conductivity, electrical conductivity, and thermopower are presented from 77–350 K on two films with thickness <100 nm formed from semiconducting single-walled carbon nanotubes. These measurements are made with silicon–nitride membrane thermal isolation platforms. The two films, formed from disordered networks of tubes with differing tube and bundle size, have very different thermal conductivity. One film matches a simple model of heat conduction assuming constant phonon velocity and mean free path, and 3D Debye heat capacity with a Debye temperature of 770 K. The second film shows a more complicated temperature dependence, with a dramatic drop in a relatively narrow window near 200 K where phonon contributions to thermal conductivity essentially vanish. This causes a corresponding large increase in thermoelectric figure-of-merit at the same temperature. A better understanding of this behavior can allow significant improvement in thermoelectric efficiency of these low-cost earth-abundant, organic electronic materials. Finally, heat and charge conductivity near room temperature is also presented as a function of doping, which provides further information on the interaction of dopant molecules and phonon transport in disordered nanotube films.

36 MATERIALS SCIENCE↗

Thermal Conductivity of BAs under Pressure

Abstract The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three‐ and four‐phonon scattering rates. This study reports the thermal conductivity of BAs from 0 to 30 GPa. Thermal conductivity vs. pressure of BAs is measured by time‐domain thermoreflectance with a diamond anvil cell. In stark contrast to what is typical for nonmetallic crystals, BAs is observed to have a pressure independent thermal conductivity below 30 GPa. The thermal conductivity of nonmetallic crystals typically increases upon compression. The unusual pressure independence of BAs's thermal conductivity shows the important relationship between phonon dispersion properties and three‐ and four‐phonon scattering rates.

36 MATERIALS SCIENCE↗

Synthesis and characterization of PANI/P-2M conductive composites: Thermal, rheological, mechanical, and electrical properties

In this article, a new conductive thermosetting resin system was developed using Polyaniline with 2-Methacryloyloxyethyl acid phosphate (P-2 M) as a dopant. The resin has shown better steady state viscosity and enhanced mechanical properties as high as 3±0.8 GPa as compared to our previously developed resin system of PANI-DBSA. A DSC analysis was conducted to estimate the activation energy and the exact amount of energy for doping and curing process of the resin. The resin was synthesized with various wt% of PANI and each combination was characterized in detail. As the amount of PANI was increased, the electrical conductivity significantly enhanced. The maximum electrical conductivity obtained is 0.5 S/m, which is lower than other conductive resins but is many orders higher than epoxy resin. The uncured resin was studied for its viscosity change with shear rate and the constitution of PANI in the resin and we obtained a desirable steady-state viscosity of the resin. Thus, the newly developed resin with efficient steady state viscosity in the favorable range, optimized electrical conductivity, and superior mechanical properties, can be applied into CFRP fabrication.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystallization of electrically conductive visibly transparent ITO thin films by wavelength-range-specific pulsed Xe arc lamp annealing

Here, the transparent electric conductors made of indium tin oxide (ITO)-doped glass prepared by a flash lamp annealing (FLA) process were compared with ITO-doped glass prepared via a conventional rapid thermal annealing (RTA) process. Stylus surface profilometry was used to determine thicknesses, scanning electron microscopy was used to image surfaces, X-ray diffraction was used to determine film structures, X-ray photoelectron spectroscopy was used to determine oxidation states and film compositions, 4-point probe measurements were used to determine electrical conductivities, UV–Vis spectroscopy was used to determine film transparencies, and selective light filtering was used to determine which wavelengths of light are needed to anneal ITO into a visibly transparent electrically conductive thin film via an FLA process. The results showed that FLA with visible light can be used to nearly instantaneously anneal ITO to create visibly transparent and electrically conductive ITO thin films on glass. The FLA process achieved this by predominately exciting unoxidized indium, unoxidized tin, tin monoxide (SnO), and non-stoichiometric indium oxide (InO x ), appropriately distributed in an electron beam physical vapor-deposited amorphous ITO thin film, to allow their oxidation and crystallization into an electrically conductive visibly transparent ITO. Though it is possible to prepare ITO-doped glass that is more transparent with an RTA process, the FLA process is significantly faster, has comparable electrical conductivity, and can strongly localize heating to areas of the as-deposited ITO thin film that are not electrically conductive and visibly transparent.

36 MATERIALS SCIENCE↗

Conductivity of PEO/PLA Doped Liquid Crystal Ionomer Solid Polymer Electrolyte in Mesomorphic Range

A novel polyethylene oxide (PEO)/polylactic acid (PLA) solid polymer electrolyte (SPE) doped with Liquid crystal ionomer (LCI) was prepared by automatic scraping membrane technology and the liquid crystal property of LCI was proposed as an effective strategy to improve the conductivity. The highest conductivity of the SPE with 0.5 wt% LCI achieve a value of 2.19 × 10{sup −4} S/cm at 17 °C which is approximately four orders of magnitude higher than that of the original PEO solid polymer electrolyte, conductivity at room temperature is 10{sup −7}–10{sup −8} S/cm. This is because the crystallinity is reduced by 25.3% compared to the pure PEO host. Differential Scanning Calorimetry (DSC) and polarizing microscope (POM) characterize the structure and properties of LCI. Electrochemical Impedance Spectroscopy (EIS) shows that the conductivity of the polymer electrolyte with 0.5 wt% LCI increased abruptly at 35 °C as the temperature is higher than T{sub g} of LCI, reaching 6.37 × 10{sup −4} S/cm which is 191% higher than that at 17 °C. There ionic conductivity has been improved extremely by continuous channel for efficient ion transportation, especially at the microtherm. And this change is greater at the elevated temperature regions, in line with the VTF equation. In summary, LCI’s liquid crystal performance can be used as an effective strategy to improve the low temperature conductivity of SPE.

36 MATERIALS SCIENCE↗

An Investigation on the Optical Band Gap and Ac Conductivity of Mn-Zn Nanoferrites

In this paper, the behaviour of the optical band gap and ac conductivity of Mn-Zn nanoferrites with the variation of the Zn concentration is reported. It was observed that in spite of a slight increase in the optical band gap, ac conductivity increases with the increase in Zn concentration. The observed behaviour has been explained in terms of the dominating factor which plays a key role in determining its properties. Optical band gap has a strong dependence on the crystallite size while the ac conductivity depends on the availability of the charge carriers for conduction and applied frequency. With the variation in Zn concentration, the above-mentioned important factors change which affect both the properties. A comparative examination of the optical band gap and ac conductivity of the prepared samples clearly gives support to the hopping of the charge carriers as the conduction mechanism in ferrites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transition of Blast Furnace Slag from Silicate Based to Aluminate Based: Electrical Conductivity

The electrical conductivity of the CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO-TiO{sub 2} slag was determined using the four-electrode method. The effect of the Al{sub 2}O{sub 3} and Al{sub 2}O{sub 3}/SiO{sub 2} mass ratio on the electrical conductivity was studied. At a fixed CaO/SiO{sub 2} ratio of 1.20, the electrical conductivity decreases with increasing Al{sub 2}O{sub 3} from 16 mass pct to 24 mass pct because of the increased polymerization of aluminosilicate structures and the reduced amount of conductive ions. However, it increases with Al{sub 2}O{sub 3} of more than 24 mass pct because of the difference in the stable energy between [AlO{sub 4}]{sup 5−} and [SiO{sub 4}]{sup 4−}. Increasing the Al{sub 2}O{sub 3}/SiO{sub 2} ratio from 0.47 to 0.79 causes the electrical conductivity to increase and has an opposite effect when the ratio is greater than 0.79. Furthermore, Raman spectroscopy of the quenched slags was analyzed to understand the structural role of Al{sub 2}O{sub 3} and Al{sub 2}O{sub 3}/SiO{sub 2} mass ratio in the network. The Raman spectroscopy results indirectly supported the variations of electrical conductivity with the composition of the slags.

36 MATERIALS SCIENCE↗

Effect of B{sub 2}O{sub 3} Addition on Electrical Conductivity and Structural Roles of CaO-SiO{sub 2}-B{sub 2}O{sub 3} Slag

The effect of B{sub 2}O{sub 3} addition on electrical conductivity of CaO-SiO{sub 2}-B{sub 2}O{sub 3} slag was investigated using the four-electrode method. The slag structure was determined from Raman and nuclear magnetic resonance spectra. The experimental results show that the electrical conductivity, as the B{sub 2}O{sub 3} content in the slag increased from 0 to 10 pct, monotonously increases from 0.0769 to 0.2642 Ω{sup −1} cm{sup −1} at temperatures ranging from 1783 to 1873 K (1510 °C to 1600 °C). The effects of temperature on electrical conductivity obeyed the Arrhenius law, and the electrical conductivity increased as the temperature increased. The Raman spectra results indicated that addition of B{sub 2}O{sub 3} led to an increase of Q{sup 3}(Si) at the cost of Q{sup 2}(Si), which will increase the degree of polymerization of the slag. {sup 11}B nuclear magnetic resonance spectra showed that both BO{sub 3} trigonal and BO{sub 4} tetrahedral structures increased with the increasing B{sub 2}O{sub 3} content. There was a competitive effect between the presence of these structures and an enhanced degree of polymerization of slags in the networks, which resulted in the increased electrical conductivity of the slag. A structure–electrical conductivity model for CaO-SiO{sub 2}-B{sub 2}O{sub 3} slag was established.

36 MATERIALS SCIENCE↗

Remarkable enhancement in thermal conductivity of stainless-steel leveraging metal composite via laser powder bed fusion: 316L-Cu composite

This work aimed to significantly enhance the thermal conductivity of the SS matrix by fabricating a metal composite SS-Cu system utilizing a laser powder bed fusion process. The impact of process parameters on the microstructure of SS-Cu samples is investigated. Here, the processing and post-processing factors that influence the effective thermal conductivity of the metal composite SS-Cu system are discussed. Then, the effective thermal conductivity and mechanical properties of the SS-Cu composite are measured at room temperature and operating temperature of 300 °C. The optimized laser powder bed fusion parameters led to low Marangoni convection, high cooling rate, greater macro-segregation, and higher thermal conductivity values albeit at the cost of ductility in SS-Cu metal composite likely due to the presence of the unmelted powder particles. As-printed SS-60 vol % Cu and annealed SS-60 vol % Cu had 2.5X and 6.6X thermal conductivity enhancement, respectively. During annealing, phase separation, partial melting of Cu, and formation of a continuous network of Cu surrounding SS play a key role in enhancing the thermal conductivity of the SS-Cu metal composite structure.

36 MATERIALS SCIENCE↗

Accelerated computation of lattice thermal conductivity using neural network interatomic potentials

We report with the development of the density functional theory (DFT) and ever-increasing computational capacity, an accurate prediction of lattice thermal conductivity based on the Boltzmann transport theory becomes computationally feasible, contributing to a fundamental understanding of thermal conductivity as well as a choice of the optimal materials for specific applications. However, steep costs in evaluating third-order force constants limit the theoretical investigation to crystals with high symmetry and few atoms in the unit cell. Currently, machine learning potentials are garnering attention as a computationally efficient high-fidelity model of DFT, and several studies have demonstrated that the lattice thermal conductivity could be computed accurately via the machine learning potentials. However, test materials were mostly crystals with high symmetries, and the applicability of machine learning potentials to a wide range of materials has yet to be demonstrated. Furthermore, establishing a standard training set that provides consistent accuracy and computational efficiencies across a wide range of materials would be useful. To address these issues, herein we compute lattice thermal conductivities at 300 K using neural network interatomic potentials. As test materials, we select 25 materials with diverse symmetries and a wide range of lattice thermal conductivities between 10 -1 and 10 3 Wm -1 K -1 . Among various choices of training sets, we find that molecular dynamics trajectories at 50–700 K consistently provide results at par with DFT for the test materials. In contrast to pure DFT approaches, the computational cost in the present approach is uniform over the test materials, yielding a speed gain of 2–10 folds. When a smaller reduced training set is used, the relative efficiency increases by up to ~50 folds without sacrificing accuracy significantly. The current work will broaden the application scope of machine learning potentials by establishing a robust framework for accurately computing lattice thermal conductivity with machine learning potentials.

36 MATERIALS SCIENCE↗

Thermal conductivity measurement using modulated photothermal radiometry for nitrate and chloride molten salts

Molten salts are being used or explored for thermal energy storage and conversion systems in concentrating solar power and nuclear power plants. Thermal conductivity of molten salts is an important thermophysical property dictating the performance and cost of these systems, but its accurate measurement has been challenging, as evidenced by wide scattering of existing data in literature. The corrosive and conducting nature of these fluids also leads to time consuming sample preparation processes of many contact-based measurements. Here, in this work, we report the measurement of thermal conductivity of molten salts using a modulated photothermal radiometry (MPR) technique, which is a laser-based, non-contact, frequency-domain method adopted for molten salts for the first time. By unitizing the advantages of front side sensing of frequency-domain measurements and the vertical holder orientation, the technique can minimize the natural convection and salt creeping effects, thus yielding accurate molten salt thermal conductivity . The MPR technique is first calibrated using standard molten materials including paraffin wax and sulfur. It is then applied on measuring pure nitrate salts (NaNO 3 and KNO 3 ), solar salt (NaNO 3 –KNO 3 mixture), and chloride salt (NaCl–KCl–MgCl 2 ). The measurement results are compared with data from literature, especially those obtained from laser flash analysis (LFA). Our results demonstrate that the MPR is a convenient and reliable technique of measuring thermal conductivity of molten salts. Accurate thermal conductivity data of molten salts will be valuable in developing the next-generation high-temperature thermal energy storage and conversion systems.

14 SOLAR ENERGY↗

Thermal conductivity suppression in uranium-doped thorium dioxide due to phonon-spin interactions

In this work, impact of low level of uranium (U) atom substitution on thermal conductivity of thorium dioxide (ThO 2 ) is investigated. ThO 2 is an electronic insulator with a wide optical band-gap and no unpaired electrons whose thermal transport is governed by phonons. U-substitution introduces unpaired f-electrons resulting in paramagnetic behavior of U-ThO 2 at room temperature, which significantly suppresses its thermal conductivity. A single crystal of U-ThO 2 with graded composition of U is grown using a hydrothermal synthesis method, and thermal conductivity measurements are performed in regions with uniform composition of U at levels of 0%, 6%, 9% and 16%. Measured thermal conductivity profiles over 77–300 K temperature range are analyzed using an analytical expression for phonon-mediated thermal transport based on Klemens-Callaway model. Temperature dependent thermal conductivity is found to deviate significantly from the Rayleigh scattering trend expected for a simple substitutional point defect with a small perturbation to mass and interatomic forces. With the resonant scattering term, observed large suppression of thermal conductivity at low temperatures can be closely reproduced. Additionally, the extracted phonon-spin coupling constants imply a nonlinear relation of phonon-spin interaction intensity with respect to U doping percentage. Our study reveals how phonon-spin scattering contributed by unpaired f-electrons in U atoms influences thermal transport in the U-ThO 2 system.

36 MATERIALS SCIENCE↗

Enhancing thermal conductivity of UO 2 with the addition of UB 2 via conventional sintering techniques

We report that uranium dioxide has been the primary fuel type used in light water reactors for more than 40 years and proven to be reliable and robust. However, the Fukushima-Daiichi nuclear accident has motivated new work evaluating fuels with characteristics promoting accident tolerance, including enhanced thermal conductivity. Recently, additives have been investigated to increase thermal conductivity, but research has been largely focused on non-fissile additions. This study investigated the use of fissile additives to not only increase the thermal conductivity but also increase the uranium loading. Uranium diboride was chosen as the additive for this study due to its promising corrosion behavior as well as its significantly higher thermal conductivity at 573 K (25 Wm -1 K -1 ) when compared to UO 2 (7 Wm -1 K -1 ). Uranium diboride powder was fabricated via the arc melting technique and a ball milling process prior to mixing with UO 2 in a 90/10 wt% UO 2 /UB 2 ratio. Green bodies were made using a uniaxial die and subjected to a traditional pressureless sintering technique at 2073 K in argon. Sintered samples were analyzed via laser flash analysis for thermal diffusivity and differential scanning calorimetry for specific heat capacity in order to calculate thermal conductivity. The samples displayed an increase of 36-55% in thermal conductivity between 323 K and 1273 K when compared to the benchmark samples (pure UO 2 ) as reported in open literature.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Design concept of co-ionic conducting solid oxide electrolyte for stable operation in a cell-imbalanced fuel cell stack

A bilayer composite electrolyte comprising BaCe 0.85 Y 0.15 O 3-d (BCY15) – Gd 0.2 Ce 0.8 O 2-d (GDC20) at the anode side and BaZr 0.85 Y 0.15 O 3-d (BZY15) – Nd 0.1 Ce 0.9 O 2-d (NDC10) at the cathode side is designed for improving the stability of co-ionic conducting solid oxide fuel cells (SOFCs) in a cell imbalanced stack. Contrary to the single layer structured SOFCs, the bi-layer cell stably operates without electrode delamination under negative voltage conditions. We measure local internal p O 2 values using embedded Pt probes. Based on these values, local electronic conduction is estimated in combination with four probe DC conductivity measurements. It is found that n-type conductivity (~10 –3 Scm –1 ) and p-type conductivity (10 –5 –10 –4 Scm –1 ) are developed in the BCY15-GDC20 near the anode side and in the BZY15-NDC10 near the cathode side, respectively. Finally, the results indicate that local electronic conduction in electrolyte regions near both the anode and cathode interfaces is a crucial factor for the durability of co-ionic SOFCs under negative voltage operation. We therefore suggest the bi-layer configuration as a practical solution to protect co-ionic SOFCs in a cell-imbalanced stack.

25 ENERGY STORAGE↗

Structure, thermal expansion and electrical conductivity of Nb-substituted LaCoO{sub 3}

The effect of Nb-substitution in LaCoO{sub 3} has been examined by evaluating the electrical conductivity, thermal expansion and crystal structure of the solid solutions LaCo{sub 1-x}Nb{sub x}O{sub 3} (x=0 to 1/3). It was demonstrated that Nb-substitution in LaCoO{sub 3} was mainly compensated by reduction of Co{sup 3+} to Co{sup 2+}, and that oxidation of Co{sup 2+} could destabilise the solid solution. The ambient crystal structure was shown to transform from rhombohedral R3{sup Macron }c perovskite (x=0) to orthorhombic Pbnm (x=0.15, 0.20) and finally to B-site ordered perovskite P2{sub 1}/n (x=0.25, 1/3) perovskite with increasing Nb-substitution. The thermal expansion of LaCo{sub 1-x}Nb{sub x}O{sub 3} was shown to be strongly depressed with increasing Nb-content, and significantly lower thermal expansion was observed for LaCo{sub 2/3}Nb{sub 1/3}O{sub 3} relative to LaCoO{sub 3}. The electrical conductivity was reduced with increasing Nb-content, and semi-conducting properties was demonstrated for LaCo{sub 1-x}Nb{sub x}O{sub 3} in contrast to the metallic behaviour of pure LaCoO{sub 3} at elevated temperature. The thermal expansion, electrical conductivity and the stability of the materials were discussed with emphasis on Co/Nb ordering, the oxidation state and spin transitions of Co. - Graphical abstract: Substitution of Nb in LaCoO{sub 3} increases the unit cell volume, reduces the symmetry of the unit cell and introduces cation ordering. The chemical substitution leads to suppression of the electronic conductivity and reduces the thermal expansion of the lattice. Highlights: Black-Right-Pointing-Pointer Cation ordering and crystal structure is reported for LaCo{sub x}Nb{sub 1-x}O{sub 3}. Black-Right-Pointing-Pointer Substitution of Nb in LaCoO{sub 3} is compensated by reduction of Co{sup 3+} to Co{sup 2+}. Black-Right-Pointing-Pointer Thermal expansion of LaCoO{sub 3} is reduced by Nb-substitution. Black-Right-Pointing-Pointer Electrical conductivity of LaCoO{sub 3} is reduced by Nb-substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fergusonite-type CeNbO{sub 4+δ}: Single crystal growth, symmetry revision and conductivity

Large fergusonite-type (ABO{sub 4}, A=Ce, B=Nb) oxide crystals, a prototype electrolyte composition for solid oxide fuel cells (SOFC), were prepared for the first time in a floating zone mirror furnace under air or argon atmospheres. While CeNbO{sub 4} grown in air contained CeNbO{sub 4.08} as a minor impurity that compromised structural analysis, the argon atmosphere yielded a single phase crystal of monoclinic CeNbO{sub 4}, as confirmed by selected area electron diffraction, powder and single crystal X-ray diffraction. The structure was determined in the standard space group setting C12/c1 (No. 15), rather than the commonly adopted I12/a1. AC impedance spectroscopy conducted under argon found that stoichiometric CeNbO{sub 4} single crystals showed lower conductivity compared to CeNbO{sub 4+δ} confirming interstitial oxygen can penetrate through fergusonite and is responsible for the higher conductivity associated with these oxides. - Graphical abstract: Large fergusonite-type CeNbO{sub 4} crystals were prepared for the first time in a floating zone mirror furnace. Crystal growth in an argon atmosphere yielded a single phase monoclinic CeNbO4, as confirmed by selected area electron diffraction, powder and single crystal X-ray diffraction. The structure was determined in the standard space group setting C12/c1 (No. 15), rather than the commonly adopted I12/a1. AC impedance spectroscopy found CeNbO{sub 4} single crystals showed lower conductivity compared to CeNbO{sub 4+δ} confirming interstitial oxygen can penetrate through fergusonite and is responsible for the higher conductivity associated with these oxides. Highlights: • Preparation of single crystals of CeNbO{sub 4} using a floating zone mirror furnace. • Correction to the crystal symmetry of the monoclinic form of CeNbO{sub 4}. • Report the conductivity of a single crystal of CeNbO{sub 4}.

36 MATERIALS SCIENCE↗

Synthesis and investigation of proton conductivity for intercalated kaolinite with 4-amidinopyridinium chloride

The proton-conducting materials have potential application in devices such as fuel cells. In this study, a mineral kaolinite-based proton conducting material, kaolinite-4-amidinopyridinium hydrochloride (K-4-APy–HCl), was synthesized by the intercalated compound kaolinite-4-amidinopyridine (K-4-APy) adsorbing volatilizing HCl. The thermogravimetric analysis (TG), powder X-ray diffraction (PXRD) and IR spectrum confirmed the HCl successfully inserting into the interlayer space of kaolinite and the 4-aminopyridine being protonated. The intercalation efficiency is estimated to be ca. 85.6%. With respect to K-4-APy, the interlayer space expends by 1.53 Å. The thermal decomposition mechanism was studied by PXRD and TG techniques. The K-4-APy–HCl shows proton conductivity with σ=3.379×10{sup −8} S cm{sup −1} at 373 K and E{sub a}=1.159 eV in the anhydrous condition, which are comparable to MOFs-based proton conducting materials. - Graphical abstract: The intercalated hybrid of mineral kaolinite with 4-amidinopyridinium hydrochloride is prepared to use as proton conducting material. - Highlights: • A new strategy is proposed for preparation of kaolinite-based proton conductor. • Intercalatied hybrid was prepared by sequentially inserting 4-amidinopyridine and adsorbing HCl. • The proton conductivity of intercalated hybrid is comparable to MOFs-based proton-conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sodium superionic conduction in tetragonal Na{sub 3}PS{sub 4}

Highlights: • Na{sub 3}PS{sub 4} base solid electrolytes were fabricated by various synthetic routes. • The formation of phases in Na{sub 3+5x}P{sub 1–x}S{sub 4} depends on reaction conditions. • Tetragonal phase III showed the highest conductivity of 3.39 × 10{sup -3} S cm{sup -1}at 25 °C. • Structural analysis revealed the 3D conduction pathway in the tetragonal phase III. • Na{sub 3}PS{sub 4} functions as a solid electrolyte in all-solid-state sodium batteries. - Abstract: Sodium superionic conductors are highly promising as solid electrolytes for all-solid-state sodium batteries, with the capacity to improve energy and power density of liquid-electrolyte-based batteries and to address their safety issues. However, the ionic conductivity of sodium electrolytes remains roughly one order of magnitude lower than that of lithium systems. Herein, we report a synthesis method for a sodium superionic conductor, tetragonal Na{sub 3}PS{sub 4}, with an ionic conductivity of 3.39 × 10{sup −3} Scm{sup −1} at 25 °C—the highest value yet reported among sulfide-type sodium conductors. The high conductivity is achieved through quenching from 700 °C, which introduces sodium vacancies, and annealing at 450 °C, which increases vacancies and expands lattice volume. The phase is comprised of a framework of isolated PS{sub 4} tetrahedra, with partial distribution of Na over 3D pathways. The high intrinsic conductivity together with low grain boundary contribution and soft mechanical properties make Na{sub 3}PS{sub 4} a promising candidate for sodium solid electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗