Search NASA⌕ Search

SEARCH · Search NASA

Results for “connected components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

A Structural Design Approach Tailored for the Rapid Preliminary Design of Microreactor Components

High-temperature microreactors can play a role in developing reliable, portable energy sources for off-grid remote locations, microgrid concepts, and industrial process heat. Portability and passive safety criteria tend to skew microreactor structural component designs toward complex geometries, high thermal stresses, and design bases with large numbers of startup/shutdown cycles. Current design rules, as typified by Section III of the American Society of Mechanical Engineers (ASME) Boiler & Pressure Vessel Code, are less than optimal for these conditions, particularly for preliminary component designs where developers need to rapidly consider a large number of potential component configurations. This paper presents a design method targeted toward rapid, efficient evaluation of preliminary component designs using modern finite element analysis. The new method retains key connections with the ASME Code rules and design data while streamlining the design approach. This paper presents the design method, several verification examples illustrating the similarities and differences between the new method and the current ASME rules, and the application of the new approach to the evaluation of a test article mimicking key features of a heat pipe–cooled microreactor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

ANALYSIS OF OPTICAL Fe II EMISSION IN A SAMPLE OF ACTIVE GALACTIC NUCLEUS SPECTRA

We present a study of optical Fe II emission in 302 active galactic nuclei (AGNs) selected from the Sloan Digital Sky Survey. We group the strongest Fe II multiplets into three groups according to the lower term of the transition (b{sup 4} F, a{sup 6} S, and a{sup 4} G terms). These approximately correspond to the blue, central, and red parts, respectively, of the 'iron shelf' around H{beta}. We calculate an Fe II template that takes into account transitions into these three terms and an additional group of lines, based on a reconstruction of the spectrum of I Zw 1. This Fe II template gives a more precise fit of the Fe II lines in broad-line AGNs than other templates. We extract Fe II, H{alpha}, H{beta}, [O III], and [N II] emission parameters and investigate correlations between them. We find that Fe II lines probably originate in an intermediate line region. We note that the blue, red, and central parts of the iron shelf have different relative intensities in different objects. Their ratios depend on continuum luminosity, FWHM H{beta}, the velocity shift of Fe II, and the H{alpha}/H{beta} flux ratio. We examine the dependence of the well-known anti-correlation between the equivalent widths of Fe II and [O III] on continuum luminosity. We find that there is a Baldwin effect for [O III] but an inverse Baldwin effect for the Fe II emission. The [O III]/Fe II ratio thus decreases with L {sub {lambda}5100}. Since the ratio is a major component of the Boroson and Green Eigenvector 1 (EV1), this implies a connection between the Baldwin effect and EV1 and could be connected with AGN evolution. We find that spectra are different for H{beta} FWHMs greater and less than {approx}3000 km s{sup -1}, and that there are different correlation coefficients between the parameters.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetic triggering — time-resolved characterisation of silicon strip modules in the presence of switching DC-DC converters

Modules for the ATLAS Inner Tracker (ITk) strip tracker include a DC-DC converter circuit glued directly to the silicon sensor which converts the 11 V supplied to the module to the 1.5 V required for the operation of the readout chips. The DC-DC converter unit, consisting of a copper solenoid and custom ASIC, is located directly above the silicon strip sensor and therefore needs to be shielded to protect the sensor from EMI noise created during the operation of the circuit. Despite dedicated shielding, consisting of an aluminium shield box with continuous solder seams encompassing the surface components and a copper layer in the PCB beneath it, module channels connected to sensor strips located beneath the converter circuit were found to show a noise increase. While the DC-DC converter unit causing the underlying EMI noise operates at a frequency of 2 MHz, module characterisation measurements for ITk strip tracker modules are typically performed asynchronously to the DC-DC switching and are therefore averaged over the full range of time bins with respect to the converter frequency. In order to investigate the time dependence of the noise injection relative to the DC-DC switching frequency, a dedicated setup to understand the time-resolved performance change in modules was developed. By using a magnetic field probe to measure the field leaking through the shield box and triggering on its rising edge, data taking could be synchronised with the DC-DC switching. This paper illustrates the concept and setup of such time-resolved performance measurements using magnetic triggering and presents results for the observed effects on signal and noise for ATLAS ITk strip modules from both laboratory and beam tests.

47 OTHER INSTRUMENTATION↗

Correlating isothermal compressibility to nucleon fluctuations in the inner crust of neutron stars

The question of how and which physical observables or thermodynamic parameters can best predict the onset of a possible phase transition in the inner crust of neutron stars remains largely unresolved. Here, using semiclassical Monte Carlo simulations, we investigate the isothermal compressibility and density fluctuations in a region of relevance to the dynamics of the inner crust. We show that the isothermal compressibility serves as a robust observable to characterize the transition from the nonuniform crust to the uniform core for proton fractions over 0.2. Moreover, we show explicitly how the two-component isothermal compressibility, computed using the Kirkwood-Buff theory, is directly connected to the fluctuations in the number density, recorded in the grand canonical ensemble by monitoring the number of particles in a small volume located at the center of the simulation box. That is, we compute mean-square particle fluctuations and compare them against the isothermal compressibility for different proton fractions. Although our results show that the mean-square particle fluctuations are proportional to the isothermal compressibility, the lack of a perfect correlation is attributed to the relatively small number of particles included in the simulations. The nonunity slope observed in the dimensionless isothermal compressibility—total nucleon fluctuation variance relationship suggests that the inner crust of neutron stars is composed of anisotropic and inhomogeneous matter.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Isospin splitting of the nucleon-nucleus optical potential

The volume component of the phenomenological optical potential is traced to the microscopic theory of nuclear matter. The latter is based on the Brueckner-Hartree-Fock approach with three-body force, which recently has proved to be able to reproduce the empirical saturation properties of nuclear matter. The self-energy is calculated and its on-shell matrix elements are related to the volume part of the optical potential. A previous investigation, where the real part of the microscopic potential was compared with an empirical one, which is a fit of the experimental nucleon-nucleus elastic scattering, is here extended to the absorptive component. Moreover, the isospin splitting of the optical potential is discussed in connection with the proton and neutron effective masses of isospin asymmetric nuclear systems.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Do Coupled Climate Models Correctly Simulate the Upward Branch of the Deep Ocean Global Conveyor?

The large-scale meridional overturning circulation (MOC) connects the deep ocean, a major reservoir of carbon, to the other components of the climate system and must therefore be accurately represented in Earth System Models. Our project aims to address the specific question of the pathways and mechanisms controlling the upwelling branch of the MOC, a subject of significant disagreement between models and observational syntheses, and among general circulation models. Observations of these pathways are limited, particularly in regions of complex hydrography such as the Southern Ocean. As such, we rely on models to examine theories of the overturning circulation, both physically and biogeochemically. This grant focused on a particular aspect of the meridional overturning circulation (MOC) where there is currently significant disagreement between models and observationally based analyses of the MOC, and amongst general circulation models. In particular, the research focused on addressing the following questions: 1. Where does the deep water that sinks in the polar regions rise to the surface? 2. What processes are responsible for this rise? 3. Do state-of-the-art coupled GCMs capture these processes? Our research had three key components: observational synthesis, model development and model analysis. In this final report we outline the key results from these areas of research for the 2007 to 2012 grant period. The research described here was carried out primarily by graduate student, Daniele Bianchi (now a Postdoc at McGill University, Canada), and Postdoc Stephanie Downes (now a Research Fellow at The Australian national University, Australia). Additional support was provided for programmers Jennifer Simeon as well as Rick Slater.

3He data Synthesis↗

Early-Time (E1) High-Altitude Electromagnetic Pulse Effects on Trip Coils

A High-Altitude Electromagnetic Pulse (HEMP) is a potential threat to the power grid. HEMP can couple to transmission lines and cables, causing significant overvoltages which can be harmful to line connected equipment. The effects of overvoltages on various types of power systems components need to be understood. HEMP effects on trip coils were tested and presented in this report. A high voltage pulser was built to replicate the induced voltage waveform from a HEMP. The pulser was used to test breaker trip coils with increasing pulse magnitudes ranging from 20 kV to 80 kV. The State-of-Health of each trip coils was measured via mechanical operation and impedance measurements before and after each insult to identify any damage or degradation to the trip coils. Dielectric breakdown was observed at the conductor leads during testing, causing the HEMP insult to be diverted to the grounded casing. However, the dielectric breakdown did not cause interference with regular device operation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Mutations of Omicron Variant at the Interface of the Receptor Domain Motif and Human Angiotensin-Converting Enzyme-2

The most recent Omicron variant of SARS-CoV-2 has caused global concern and anxiety. The only thing certain about this strain, with a large number of mutations in the spike protein, is that it spreads quickly, seems to evade immune defense, and mitigates the benefits of existing vaccines. Based on the ultra-large-scale ab initio computational modeling of the receptor binding motif (RBM) and the human angiotensin-converting enzyme-2 (ACE2) interface, we provide the details of the effect of Omicron mutations at the fundamental atomic scale level. In-depth analysis anchored in the novel concept of amino acid-amino acid bond pair units (AABPU) indicates that mutations in the Omicron variant are connected with (i) significant changes in the shape and structure of AABPU components, together with (ii) significant increase in the positive partial charge, which facilitates the interaction with ACE2. We have identified changes in bonding due to mutations in the RBM. The calculated bond order, based on AABPU, reveals that the Omicron mutations increase the binding strength of RBM to ACE2. Our findings correlate with and are instrumental to explain the current observations and can contribute to the prediction of next potential new variant of concern.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Type U CAMAC crate controller for the Spacelab multi-crate, multi-processor system

A set of standard CAMAC modules for Spacelab payloads is being developed by NASA. A crate controller, a processor module, memory modules and a databus to connect them are being developed at the Goddard Space Flight Center. These components will provide for the implementation of CAMAC data systems ranging in complexity from fixed-format, single-crate data collection systems not requiring a processor to a multi-crate data system, including several computers (processors). The Spacelab CAMAC data system is introduced with the role of the crate controller described. The implementation and operation of the crate controller is described. The instruction set of the crate controller is also presented.

Baker, R. G.↗

Correlated whistler and electron plasma oscillation bursts detected on ISEE-3

The ISEE-3 plasma wave instrument detects associated bursts of electron plasma oscillations and whistler mode waves at an average rate of event one every two days. The plasma wave measurements give the electron number density, and simultaneously measured E and B amplitudes are used to deduce an index of refraction consistent with whistler mode propagation for the measured number density and magnetic field. Burst durations are a few minutes, with some trains of bursts lasting up to an hour. Individual spectral scans (two per second) reveal that the whistler and plasma wave amplitude-time profiles differ within a burst. Peak plasma wave amplitudes are near one mV/m, and the peak whistler mode energy density exceeds that of the plasma oscillations by about a factor 100. The frequency of the whistler mode wave observed in one well diagnosed event agrees with the predictions of the heat flux whistler instability theory. The associated plasma wave instability probably requires a bump-on-tail feature in the heat flux electron component, possibly due to impulsive heating elsewhere on the field-line connecting to ISEE-3.

Kennel, C. F.↗

Multipressure and Temperature Probe

Aerodynamic probe is a small cylinder tube holding a network of tiny tubes leading to various ports. Six parameters are recorded simultaneously with little interference with aerodynamic flow. Two tubes connected by a hot-wire tungsten probe sense steady and fluctuating components of total and static pressures; the feedbacks from these tubes are input into differential-pressure sensors to measure fluctuating components of the pressures. Data are recorded by instruments at the back end of the probe.

Raman, K. R.↗

Nonducted coherent VLF waves and associated triggered emissions observed on the ISEE-1 satellite

A description is given of new observations of nonducted coherent VLF waves from ground-based transmitters and associated VLF emissions in the magnetosphere. The data reported were acquired by the Stanford University VLF Wave Injection Experiment on the ISEE-1 satellite. The experiment has four main components, including a broadband (1-32 kHz) VLF receiver on ISEE-1 connected to a long electric antenna, a broadband (1-20 kHz) controllable VLF transmitter located at Siple Station in the Antarctic, various VLF navigation and communications transmitters, and ground stations in the Antarctic and Canada. The main goal of the experiment is to acquire understanding of interactions between coherent VLF waves and energetic particles in the magnetosphere, in particular the whistler mode instability through which both natural and stimulated VLF emissions are produced.

Bell, T. F.↗

Quick-Disconnect Valves For Modular Fluid Systems

Maintainable valves being developed for use as interfaces between modules or other separable components in maintainable fluid systems. Pair of valves joins two plumbing subsystems, connected to or disconnected from each other and enabling either or both to be isolated upon disconnection. Relief valve built into cartridge of maintainable valve, cartridge removes for replacement or inspection. New valves designed for temperature-regulating equipment aboard space station, used with or without modifications in variety of liquid and low-pressure-gas systems on Earth.

Fluger, Charles↗

Wave equations and computational models for sonic boom propagation through a turbulent atmosphere

The improved simulation of sonic boom propagation through the real atmosphere requires greater understanding of how the transient acoustic pulses popularly termed sonic booms are affected by atmospheric turbulence. A nonlinear partial differential equation that can be used to simulate the effects of smaller-scale atmospheric turbulence on sonic boom waveforms is described. The equation is first order in the time derivative and involves an extension of geometrical acoustics to include diffraction phenomena. Various terms in the equation are explained in physical terms. Such terms include those representing convection at the wave speed, diffraction, molecular relaxation, classical dissipation, and nonlinear steepening. The atmospheric turbulence enters through an effective sound speed, which varies with all three spatial coordinates, and which is the sum of the local sound speed and the component of the turbulent flow velocity projected along a central ray that connects the aircraft trajectory with the listener.

Pierce, Allan D.↗

Pair-density transitions in accretion disk coronae

The thermal and e(+)e(-)-pair equilibrium structure of two-temperature disk coronae above a cool (about 10 exp 6 K) disk around a black hole of 10 solar masses are investigated. Soft photons are assumed to be amply supplied from the cool disk. Two-pair thermal equilibrium points are found for a given proton column density: the low state with very small pair density and the high state dominated by pairs. Both states are thermally unstable, while for perturbations in pair density the high state is unstable and the low state is stable. Two possible scenarios are discussed for the fate of a two-temperature corona. When the proton optical depth is relatively small (e.g., less than 1) and the temperature of input soft photons is low (e.g., less than 10 exp 6 K), the corona will undergo a limit cycle between the high state and the low state on a time scale of milliseconds. As a consequence of Compton scattering of the soft photons, the emergent spectrum in the high state is rather flat with a big Wien bump at about 100 keV, whereas it is composed of a power-law component in the low state. Some observational consequences are briefly discussed in connection with the high-low spectral transition in Cyg X-1.

Kusunose, Masaaki↗

Advances in Domain Connectivity for Overset Grids Using the X-Rays Approach

Advances in automation and robustness of the X-rays approach to domain connectivity for overset grids are presented. Given the surface definition for each component that makes up a complex configuration, the determination of hole points with appropriate hole boundaries is automatically and efficiently performed. Improvements made to the original X-rays approach for identifying the minimum hole include an automated closure scheme for hole-cutters with open boundaries, automatic determination of grid points to be considered for blanking by each hole-cutter, and an adaptive X-ray map to economically handle components in close proximity. Furthermore, an automated spatially varying offset of the hole boundary from the minimum hole is achieved using a dual wall-distance function and an orphan point removal iteration process. Results using the new scheme are presented for a number of static and relative motion test cases on a variety of aerospace applications.

Chan, William M.↗