Search NASA⌕ Search

SEARCH · Search NASA

Results for “delta method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

NSLS-II: Nonlinear Model Calibration for Synchrotrons

This tech note is essentially a summary of a lecture we delivered to the Acc. Phys. Journal Club Apr, 2010. However, since the estimated accuracy of these methods has been naive and misleading in the field of particle accelerators, i.e., ignores the impact of noise, we will elaborate on this in some detail. A prerequisite for a calibration of the nonlinear Hamiltonian is that the quadratic part has been understood, i.e., that the linear optics for the real accelerator has been calibrated. For synchrotron light source operations, this problem has been solved by the interactive LOCO technique/tool (Linear Optics from Closed Orbits). Before that, in the context of hadron accelerators, it has been done by signal processing of turn-by-turn BPM data. We have outlined how to make a basic calibration of the nonlinear model for synchrotrons. In particular, we have shown how this was done for LEAR, CERN (antiprotons) in the mid-80s. Specifically, our accuracy for frequency estimation was {approx} 1 x 10{sup -5} for 1024 turns (to calibrate the linear optics) and {approx} 1 x 10{sup -4} for 256 turns for tune footprint and betatron spectrum. For a comparison, the estimated tune footprint for stable beam for NSLS-II is {approx}0.1. Since the transverse damping time is {approx}20 msec, i.e., {approx}4,000 turns. There is no fundamental difference for: antiprotons, protons, and electrons in this case. Because the estimated accuracy for these methods in the field of particle accelerators has been naive, i.e., ignoring the impact of noise, we have also derived explicit formula, from first principles, for a quantitative statement. For e.g. N = 256 and 5% noise we obtain {delta}{nu} {approx} 1 x 10{sup -5}. A comparison with the state-of-the-arts in e.g. telecomm and electrical engineering since the 60s is quite revealing. For example, Kalman filter (1960), crucial for the: Ranger, Mariner, and Apollo (including the Lunar Module) missions during the 60s. Or Claude Shannon et al since the 40s for that matter. Conclusion: what's elementary in the latter is considered 'advanced', if at all, in the former. It is little surprise then that published measurements typically contains neither error bars (for the random errors) nor estimates for the systematic in the former discipline. We have also showed how to estimate the state space by turn-by-turn data from two adjacent BPMs. And how to improve the resolution of the nonlinear resonance spectrum by Fourier analyzing the linear action variables instead of the betatron motion. In fact, the state estimator could be further improved by adding a Kalman filter. For transparency, we have also summarized on how these techniques provide a framework- and method for a TQM (Total Quality Management) approach for the main ring. Of course, to make the ($2.5M) turn-by-turn data acquisition system that is being implemented (for all the BPMs) useful, a means ({approx}10% contingency for the BPM system) to drive the beam is obviously required.

43 PARTICLE ACCELERATORS↗

Realistic Earth matter effects and a method to acquire information about small {theta}{sub 13} in the detection of supernova neutrinos

In this paper, we first calculate the realistic Earth matter effects in the detection of type II supernova neutrinos at the Daya Bay reactor neutrino experiment which is currently under construction. It is found that the Earth matter effects depend on the neutrino incident angle {theta}, the neutrino mass hierarchy {delta}m{sub 31}{sup 2}, the crossing probability at the high resonance region inside the supernova, P{sub H}, the neutrino temperature, T{sub {alpha}}, and the pinching parameter in the neutrino spectrum, {eta}{sub {alpha}}. We also take into account the collective effects due to neutrino-neutrino interactions inside the supernova. With the expression for the dependence of P{sub H} on the neutrino mixing-angle {theta}{sub 13}, we obtain the relations between {theta}{sub 13} and the event numbers for various reaction channels of supernova neutrinos. Using these relations, we propose a possible method to acquire information about {theta}{sub 13} smaller than 1.5 deg. Such a sensitivity cannot be achieved by the reactor neutrino deta at the Daya Bay experiment which has a sensitivity of the order of {theta}{sub 13}{approx}3 deg. Furthermore, we apply this method to other neutrino experiments, i.e. Super-K, SNO, KamLAND, LVD, MinBooNE, Borexino, and Double-Chooz. We also study the energy spectra of the differential event numbers, dN/dE.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of Muon Neutrino Disappearance with the NOvA Experiment

The NOvA experiment consists of two functionally identical tracking calorimeter detectors which measure the neutrino energy and flavour composition of the NuMI beam at baselines of 1~km and 810~km. Measurements of neutrino oscillation parameters are extracted by comparing the neutrino energy spectrum in the far detector with predictions of the oscillated neutrino energy spectra that are made using information extracted from the near detector. Observation of muon neutrino disappearance allows NOvA to make measurements of the mass squared splitting $\Delta m^2_{32}$ and the mixing angle $\theta_{23}$. The measurement of $\theta_{23}$ will provide insight into the make-up of the third mass eigenstate and probe the muon-tau symmetry hypothesis that requires $\theta_{23} = \pi/4$. This thesis introduces three methods to improve the sensitivity of NOvA's muon neutrino disappearance analysis. First, neutrino events are separated according to an estimate of their energy resolution to distinguish well resolved events from events that are not so well resolved. Second, an optimised neutrino energy binning is implemented that uses finer binning in the region of maximum muon neutrino disappearance. Third, a hybrid selection is introduced that selects muon neutrino events with greater efficiency and purity. The combination of these improvements produces an increase in the sensitivity of the analysis equivalent to collecting 40-100\% more data across the range of possible values of $\Delta m^2_{32}$ and $\sin^2\theta_{23}$. This thesis presents new results using a 14~ktonne detector equivalent exposure of $6.05\times 10^{20}$~protons~on~target. A fit to the far detector data, assuming normal hierarchy, produces $\Delta m^2_{32}=2.45^{+0.087}_{-0.079}\times10^{-3}~\text{eV}^2$ and $\sin^2\theta_{23}$ in the range 0.429~-~0.593 with two statistically degenerate best fit points at 0.481 and 0.547. This measurement is consistent with maximal mixing where $\theta_{ 23} = \pi/4$. The data used for this thesis is 1/6 of the to! tal data that NOvA expects to collect.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Real time monitoring of COVID-19 intervention effectiveness through contact tracing data

Communities worldwide have used vaccines and facemasks to mitigate the COVID-19 pandemic. When an individual opts to vaccinate or wear a mask, they may lower their own risk of becoming infected as well as the risk that they pose to others while infected. The first benefit–reducing susceptibility–has been established across multiple studies, while the second–reducing infectivity–is less well understood. Using a new statistical method, we estimate the efficacy of vaccines and facemasks at reducing both types of risks from contact tracing data collected in an urban setting. We find that vaccination reduced the risk of onward transmission by 40.7% [95% CI 25.8–53.2%] during the Delta wave and 31.0% [95% CI 19.4–40.9%] during the Omicron wave and that mask wearing reduced the risk of infection by 64.2% [95% CI 5.8–77.3%] during the Omicron wave. By harnessing commonly-collected contact tracing data, the approach can broadly provide timely and actionable estimates of intervention efficacy against a rapidly evolving pathogen.

60 APPLIED LIFE SCIENCES↗

Correlation between electrical properties and thermodynamic stability of ACoO{sub 3-{delta}} perovskites (A= La, Pr, Nd, Sm, Gd)

For perovskites with the general formula ACoO{sub 3-{delta}} (A = La, Pr, Nd, Sm, and Gd) the influence of the A-site cation on the electrical conductivity, electronic structure, thermodynamic stability, and oxygen stoichiometry was studied. The perovskite oxide powders were produced by a combined citric acid and ethylenediaminetetraacetic acid complexing method. Ceramic specimens sintered at 1100 deg. C in air were single-phase perovskites. With increasing temperature, the electrical conductivity shows three discrete regimes. All compositions show semiconductivity up to a transition temperature of {approx}300 deg. C-450 deg. C and then behave like metallic conductors. The activation energies for the semiconductivity, as well as the transition temperatures to the metallic-like conduction, decrease monotonically with increasing pseudocubic lattice parameters, i.e., with increasing ionic radii of the A cation. This behavior correlates with decreasing oxygen nonstoichiometry and increased thermodynamic stability. The highest conductivity and the lowest activation energy of 0.66 eV were found for LaCoO{sub 3-{delta},} which also had the lowest semiconductor-metal transition temperature at 269 deg. C, the lowest oxygen nonstoichiometry of {delta}= 0.008, and the highest Gibbs free energy change for the decomposition reaction of 42.37 kJ/mol at 850 deg. C. GdCoO{sub 3-{delta}} had the highest oxygen nonstoichiometry with {delta}0.032, a high activation energy of 1.19 eV for the semiconductivity with a high transition temperature at 452 deg. C, and the lowest Gibbs free energy change of 26.54 kJ/mol at 850 deg. C. X-ray absorption spectroscopy data imply an increasing Co low-spin character with decreasing cation radius from La to Gd, while an increase in temperature increases the number of holes or Co 3d bandwidth. This correlates well with the electrical conductivity data.

36 MATERIALS SCIENCE↗

Pion production in neutrino interactions with nuclei

Neutrino-induced pion production on nuclear targets is the major inelastic channel in all present-day neutrino-oscillation experiments. It has to be understood quantitatively in order to be able to reconstruct the neutrino-energy at experiments such as MiniBooNE or K2K and T2K. We report here results of cross section calculations for both this channel and for quasielastic scattering within the semiclassical GiBUU method. This method contains scattering, both elastic and inelastic, absorption and side-feeding of channels all in a unitary, common theoretical framework and code. We find that charged current quasielastic scattering (CCQE) and 1 pi production are closely entangled in actual experiments, due to final state interactions of the scattered nucleons on one hand and of the DELTA resonances and pions, on the other hand. We discuss the uncertainties in the elementary pion production cross sections from ANL and BNL. We find the surprising result that the recent 1 pi production cross section data from MiniBooNE are well described by calculations without any FSI. For higher energies we study the validity of the Bloom-Gilman quark-hadron duality for both electron- and neutrino-induced reactions. While this duality holds quite well for nucleon targets, for nuclear targets the average resonance contributions to the structure function F{sub 2} are always lower than the DIS values. This result indicates a significant impact of nuclear effects on observables, reducing the cross section and structure functions by at least 30-40% and changing the form of various distributions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A semiclassical correction for quantum mechanical energy levels

We propose a semiclassical method for correcting molecular energy levels obtained from a quantum mechanical variational calculation. A variational calculation gives the energy level (i.e., eigenvalue) as the expectation value of the molecular Hamiltonian <{phi}|H|{phi}>, where |{phi}> is the trial wave function. The true (i.e., exact) eigenvalue E can thus be expressed as this variational result plus a correction, i.e., E=<{phi}|H|{phi}>+{Delta}E, the correction being due to the lack of exactness of the trial wave function. A formally exact expression for {Delta}E is usually given (via Loewdin partitioning methodology) in terms of the Greens function of the Hamiltonian projected onto the orthogonal complement of |{phi}>. Formal treatment of this expression (using Brillouin-Wigner perturbation theory to infinite order) leads to an expression for {Delta}E that involves matrix elements of the Greens function for the unprojected, i.e., full molecular Hamiltonian, which can then be approximated semiclassically. (Specifically, the Greens function is expressed as the Fourier transform of the quantum mechanical time evolution operator, e{sup -}iHt/({h_bar}/2{pi}), which in turn is approximated by using an initial value representation of semiclassical theory.) Calculations for several test problems (a one dimensional quartic potential, and vibrational energy levels of H{sub 2}O and H{sub 2}CO) clearly support our proposition that the error in the total eigenvalue E arises solely due to the semiclassical error in approximating {Delta}E, which is usually a small fraction of the total energy E itself.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A computational approach for hypersonic nonequilibrium radiation utilizing space partition algorithm and Gauss quadrature

An efficient computational capability for nonequilibrium radiation simulation via the ray tracing technique has been accomplished. The radiative rate equation is iteratively coupled with the aerodynamic conservation laws including nonequilibrium chemical and chemical–physical kinetic models. The spectral properties along tracing rays are determined by a space partition algorithm of the nearest neighbor search process, and the numerical accuracy is further enhanced by a local resolution refinement using the Gauss–Lobatto polynomial. The interdisciplinary governing equations are solved by an implicit delta formulation through the diminishing residual approach. The axisymmetric radiating flow fields over the reentry RAM-CII probe have been simulated and verified with flight data and previous solutions by traditional methods. A computational efficiency gain nearly forty times is realized over that of the existing simulation procedures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CP violation, single lepton polarization asymmetry, and polarized CP asymmetry in B{yields}K{sup *}l{sup +}l{sup -} decay in the four-generation standard model

In this paper we present a study of CP asymmetry, single lepton polarization asymmetry and polarized CP asymmetry in B{yields}K*l{sup +}l{sup -} decay within the four-generation standard model. Taking |V{sub t{sup '}}{sub s}*V{sub t{sup '}}{sub b}|=0.01, 0.02, 0.03 with phase {l_brace}60 deg. -120 deg.{r_brace}, which is consistent with the b{yields}sl{sup +}l{sup -} rate and the Bs mixing parameter {delta}m{sub Bs}, we find that CP asymmetry, single lepton polarization asymmetry and polarized CP asymmetry are sensitive to the existence of the fourth generation. This can serve as an indirect method to search for new physics effects, in particular, to search for the fourth-generation quarks(t{sup '},b{sup '}) via their indirect manifestations in loop diagrams.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Microwave properties of peeled HEMT devices sapphire substrates

The focus of this research is to demonstrate the first full radio frequency characterization of high electron mobility transistor (HEMT) device parameters. The results of this research are used in the design of circuits with peeled HEMT devices, e.g. 10 GHz amplifiers. Devices were fabricated using two HEMT structures grown by molecular beam epitaxy methods. A 500 A AlAs release layer for 'peel off' was included under the active layers of the structure. The structures are a homogeneously doped Al(0.3)GA(0.7)As/GaAs and a delta doped square well Al(.23)Ga(.77)As/GaAs HEMT structure. Devices were fabricated using a mesa isolation process. Contacts were done by sequentially evaporating Au/Ge/Au/Ni/Au followed by rapid thermal anneal at 400 C for 15 seconds. Gates were wet etch recessed and 1 to 1.4 micron Ti/Au gate metal was deposited. Devices were peeled off the GaAs substrate using Apiezon wax to support the active layer and a HF:DI (1:10) solution to remove the AlAs separation layer. Devices were then attached to sapphire substrates using van der Waals bonding.

Young, Paul G.↗

An application of small-gap equations in sealing devices

The study of a thin, incompressible Newtonian fluid layer trapped between two almost parallel, sliding surfaces has been actively pursued in the last decades. This subject includes lubrication applications such as slider bearings or the sealing of non-pressurized fluids with rubber rotary shaft seals. In the present work we analyze numerically the flow of lubricant fluid through a micro-gap of sealing devices. The first stage of this study is carried out assuming that a 'small-gap' parameter delta attains an extreme value in the Navier-Stokes equations. The precise meaning of small-gap is achieved by the particular limit delta = 0 which, within the bounds of the hypotheses, predicts transport of lubricant through the sealed area by centrifugal instabilities. Numerical results obtained with the penalty function approximation in the finite element method are presented. In particular, the influence of inflow and outflow boundary conditions, and their impact in the simulated flow, are discussed.

Vionnet, Carlos A.↗

Transonic Navier-Stokes calculations about a 65 deg delta wing

A computational study has been conducted in which the CFL3D Navier-Stokes solver coupled with an algebraic and a one-equation nonequilibrium turbulence model has been used to predict the flow over a 65 degree delta wing at transonic conditions for Reynolds numbers ranging from 6 x 10(exp 6) to 120 x 10(exp 6) based on mean aerodynamic chord. Solutions obtained indicated that the computational method when used with the one-equation turbulence model predicts results that compare well with experiment for attached flow conditions. Comparisons with experimental pressure at separated conditions show that the computational method, even though primary flow-field features are predicted well, does not predict secondary flow features.

Londenberg, W. Kelly↗

Higher-order brane gravity models

We discuss a very general theory of gravity, of which Lagrangian is an arbitrary function of the curvature invariants, on the brane. In general, the formulation of the junction conditions (except for Euler characteristics such as Gauss-Bonnet term) leads to the powers of the delta function and requires regularization. We suggest the way to avoid such a problem by imposing the metric and its first derivative to be regular at the brane, the second derivative to have a kink, the third derivative of the metric to have a step function discontinuity, and no sooner as the fourth derivative of the metric to give the delta function contribution to the field equations. Alternatively, we discuss the reduction of the fourth-order gravity to the second order theory by introducing extra scalar and tensor fields: the scalaron and the tensoron. In order to obtain junction conditions we apply two methods: the application of the Gauss-Codazzi formalism and the application of the generalized Gibbons-Hawking boundary terms which are appended to the appropriate actions. In the most general case we derive junction conditions without assuming the continuity of the scalaron and the tensoron on the brane. The derived junction conditions can serve studying the cosmological implications of the higher-order brane gravity models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Determining flow directions in river channel networks using planform morphology and topology

Abstract. The abundance of global, remotely sensed surface water observations has accelerated efforts toward characterizing and modeling how water moves across the Earth's surface through complex channel networks. In particular, deltas and braided river channel networks may contain thousands of links that route water, sediment, and nutrients across landscapes. In order to model flows through channel networks and characterize network structure, the direction of flow for each link within the network must be known. In this work, we propose a rapid, automatic, and objective method to identify flow directions for all links of a channel network using only remotely sensed imagery and knowledge of the network's inlet and outlet locations. We designed a suite of direction-predicting algorithms (DPAs), each of which exploits a particular morphologic characteristic of the channel network to provide a prediction of a link's flow direction. DPAs were chained together to create “recipes”, or algorithms that set all the flow directions of a channel network. Separate recipes were built for deltas and braided rivers and applied to seven delta and two braided river channel networks. Across all nine channel networks, the recipe-predicted flow directions agreed with expert judgement for 97 % of all tested links, and most disagreements were attributed to unusual channel network topologies that can easily be accounted for by pre-seeding critical links with known flow directions. Our results highlight the (non)universality of process–form relationships across deltas and braided rivers.

54 ENVIRONMENTAL SCIENCES↗

Recent Results and Methods on Higher Order and Off-diagonal Cumulants of Identified Net particle Multiplicity Distributions in Au+Au Collisions at STAR

We present recent results on the cumulants of net-particle distributions in Au+Au collisions at the STAR experiment. Beam energy dependence of net-Delta cumulants and off-diagonal cumulants are measured. These measurements provide additional constraints on the chemical freeze-out conditions. The sixth-order cumulant of net-charge and net-proton distributions is measured at psNN =200 GeV to search for the signal of the crossover phase transition. Finally, an unfolding technique is developed and applied to the net-proton distributions at 19.6 GeV to account for the non-binomial effects of the detector.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Prediction of Response to Neoadjuvant Radiotherapy in Patients With Locally Advanced Rectal Cancer by Means of Sequential 18FDG-PET

Purpose: Morphologic imaging techniques perform poorly in assessing the response to preoperative radiotherapy (RT), mainly because of desmoplastic reactions. The aim of this study was to investigate the potential of sequential 18-fluoro-2-deoxy-D-glucose (18FDG-PET) in assessing the response of rectal cancer to neoadjuvant RT and to determine which parameters can be used as surrogate markers for histopathologic response. Methods and Materials: 18FDG-PET scans were acquired before and during the 5th week after the end of RT. Tracer uptake was assessed semiquantitatively using standardized uptake values (SUV). The percentage differences (%{Delta}) between pre- and post-RT scans in SUV{sub max}, SUV{sub mean}, metabolic volume (MV), and total glycolytic volume (tGV) were calculated. Results: Forty-five consecutive patients with histologically confirmed rectal adenocarcinoma were enrolled. After neoadjuvant RT, 20 of the 45 patients were classified as histopathologic responders and 25 as non-responders. Intense 18F-FDG uptake was seen in all tumors before neoadjuvant RT (average SUV{sub max} 12.9 {+-} 6.0). When patients were classified as histologic responders and nonresponders, significant differences in %{Delta}SUV{sub max} (55.8% vs. 37.4%, p = 0.023) and %{Delta}SUV{sub mean} (40.1% vs. 21.0%, p = 0.001) were observed between the two groups. For %{Delta}MV and %{Delta}tGV, decreases were more prominent in responders but were not significantly different from those in nonresponders. As demonstrated by receiver operating characteristic analysis, %{Delta}SUV{sub mean} was a more powerful discriminator than was %{Delta}SUV{sub max}. The sensitivity, specificity, accuracy, positive predictive value, and negative predictive value for optimal threshold of %{Delta}SUV{sub mean} (24.5%) were 80%, 72%, 76%, 70%, and 82% respectively. Conclusion: Sequential 18FDG-PET allows assessment of the response to preoperative RT. Both %{Delta}SUV{sub mean} and %{Delta}SUV{sub max} correlate with histopathologic response and can be used to evaluate and compare the effectiveness of different neoadjuvant treatment strategies. The maximum accuracy figures and the positive predictive value figures for both {Delta}%SUV{sub mean} and {Delta}%SUV{sub max} are, however, too low to justify modification of the standard treatment protocol of an individual patient.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Structural evolution of an Al-Te mixture during ball milling

An Al-Te mixture was mechanically alloyed with a planetary ball mill, and the structural evolution of the Al-Te mixture during ball milling was characterized by X-ray diffractiometry (XRD), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and thermodynamic computation. Although crystalline {alpha}-Al{sub 2}Te{sub 3} was synthesized in the initial stage of milling, but the final product is a metastable Al{sub 2}Te{sub 3-{delta}} (Space group: Fm 3-bar m) with lattice parameter a = 5.925 A. The metastable Al{sub 2}Te{sub 3-{delta}} decomposes into Al and Te at about 140 deg. C.

36 MATERIALS SCIENCE↗