Search NASA⌕ Search

SEARCH · Search NASA

Results for “disk”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Initial stages of cavitation damage and erosion on copper and brass tested in a rotating disk device

In view of the differences in flow and experimental conditions, there has been a continuing debate as to whether or not the ultrasonic method of producing cavitation damage is similar to the damage occurring in cavitating flow systems, namely, venturi and rotating disk devices. In this paper, the progress of cavitation damage during incubation periods on polycrystalline copper and brass tested in a rotating disk device is presented. The results indicate several similarities and differences in the damage mechanism encountered in a rotating disk device (which simulates field rotary devices) and a magnetostriction apparatus. The macroscopic erosion appears similar to that in the vibratory device except for nonuniform erosion and apparent plastic flow during the initial damage phase.

Rao, P. V.↗

Structural dynamics studies of rotating bladed-disk assemblies coupled with flexible shaft motions

In order to analyze the dynamic behavior of the first stage compressor/fan of the 'E3' turbofan engine, a classical structural dynamics approach is employed to couple the motions of a flexible bladed disk to a rotating flexible shaft. The analysis accounts for flexible disk displacements which are transverse to the plane of rotation, and radial as well as tangential, and also accounts for rigid disk translations along, and rotations about, axes normal to the undeformed shaft axes. In the case of a wide range of E3 engine shaft flexibilities and speeds, some of the one-diametral node frequencies are shown to be affected by shaft degrees of freedom whose stiffness values are in general range of design practice. Coriolis forces are also found to significantly affect natural frequencies where strong coupling between certain modes is present.

Loewy, R. G.↗

HL Tauri and its circumstellar disk

New far infrared observations of HL Tau which support the identification of an edge-on disk surrounding the star are presented. A bolometric luminosity for the star of 7.2 solar luminosities and a ratio of infrared to optical luminosity of 630 are indicated. A circumstellar A(V) of about 7.0 mag is produced, consistent with the silicate optical depth to the star. Data on HL Tau's effective temperature and radius and its position on the HR diagram suggest that the star has recently completed its accretion phase and is only 100,000 yr old. The column masses of ice and silicates are combined with the disk dimensions to build a simple model of the disk for comparison with the primitive solar nebula. Estimates of the far-infrared emitting mass provide independent probes of the mass in larger grains around HL Tau.

Cohen, M.↗

Accretion disks, precessing jets and the asymmetric emission lines of QSOs

The broad line profiles of active galaxies are consistent with emission from the surface of an accretion disk ionized by an ultraviolet continuum emitted from a linear or point source of continuum above the disk. If the point source is offset from the axis of the disk, then the line peak is shifted from zero velocity in a way that resembles observed cases. This misalignment could result from the Lense-Thirring precession of a rotating black hole.

Shields, G. A.↗

On the clock mechanism and the implausibility of the 35 day precessing disk in HZ Herculis/Hercules X-1

The concept of the precessing accretion disk in HZ Her/Her X-1 in its varied forms, to account for the 35 day periodicity in the X-ray flux, has met many objections from a number of workers on various grounds, but it is still being invoked in current publications. These objections are reviewed and additional arguments are presented against the precessing accretion disk model. The implausibility of the disk models is demonstrated. An alternate clock mechanism, based on nonlinear oscillations in the normal star, which provides the modulation of the mass flow is discussed.

Kondo, Y.↗

The nonaxisymmetric baroclinic instability in thin accretion disks

The instability of linear, nonaxisymmetric baroclinic waves in the radiative regions of a thin accretion disk is investigated with simplifying assumptions used in the representation of the structure of the basic state. As in stars with rotation laws deviating from rotation on cylinders, the departure from barotropy ('baroclinicity') resulting from such rotation feeds potential energy from the basic state into the kinetic energy of the baroclinic motions. The baroclinic instability is considered as a possible mechanism for driving turbulence in disks. Estimations of the Reynolds stress from baroclinic waves indicate that the degree of baroclinicity in stationary disk models is insufficient to account for the large viscosity inferred from observations of, e.g., cataclysmic variables.

Cabot, W.↗

The vertical structure and stability of alpha model accretion disks

In order to understand the physical processes that determine the time-dependent characteristics of accretion disks, a parameter investigation is conducted of the vertically explicit structure corresponding to steady state, alpha-model thin disk accretion for accreting objects of 1 solar mass. Attention is given to the role of convection in the vertical structure and the location of critical points representing the onset of thermal instability, as well as optically thin conditions. It is shown that the temperature in quiescence is likely to be low for most of the matter, and scaling laws are presented for the fundamental properties of the vertically explicit models from which the time scales for various idealized phenomena are derived. The ordering of three disk time scales obtained should allow discrimination among different models.

Cannizzo, J. K.↗

Structural response of a rotating bladed disk to rotor whirl

A set of high speed rotating whirl experiments were performed in the vacuum of the MIT Blowdown Compressor Facility on the MIT Aeroelastic Rotor, which is structurally typical of a modern high bypass ratio turbofan stage. These tests identified the natural frequencies of whirl of the rotor system by forcing its response using an electromagnetic shaker whirl excitation system. The excitation was slowly swept in frequency at constant amplitude for several constant rotor speeds in both a forward and backward whirl direction. The natural frequencies of whirl determined by these experiments were compared to those predicted by an analytical 6 DOF model of a flexible blade-rigid disk-flexible shaft rotor. The model is also presented in terms of nondimensional parameters in order to assess the importance of the interation between the bladed disk dynamics and the shaft-disk dynamics. The correlation between the experimental and predicted natural frequencies is reasonable, given the uncertainty involved in determining the stiffness parameters of the system.

Crawley, E. F.↗

Accretion disk limit cycle mechanism in twin-degenerate interacting binaries

Accretion disk instability is studied as a possible mechanism causing large variations in the optical light curves of twin-degenerate interacting binary stars. The nonthermal equilibrium limit cycle behavior of the accretion disk expected for such a binary system is explored using a generalized time-dependent, nonthermal equilibrium accretion disk model developed for the study of dwarf novae. A series of bursts is computed for a wide range of values of the secondary mass transfer rate, and the results are presented and discussed.

Cannizzo, J. K.↗

Carbon monoxide isotope ratios in galactic centers and disks

For each of the six galaxies whose mm-wavelength emission of CO and C-13O were observed from both the center and the disk, and the ratio of integrated intensities P(CO)/P(C-13O) is noted to vary markedly from galactic center to galactic center, from galactic disk to galactic disk, and from point to point within a given galaxy. The observed integrated intensity ratios vary from 3 to 16, indicating that the use of a constant P(CO) to sigma(H2) conversion to derive H2 surface densities from extragalactic CO observations can produce major errors.

Rickard, L. J.↗

The wind-disk interaction in X-ray burst sources

The interaction between a radiatively driven wind from the surface of a neutron star and an accretion disk surrounding the star is considered. A bow shock forms if the wind is supersonic when it reaches the inner edge of the disk. The resultant heating of the wind material can enhance the X-ray luminosity of the source, but this effect is important only if the wind is very strong. If the terminal velocity of the wind is at least about 0.99c and the integrated kinetic energy flux of the wind is at least about 30 times the Eddington limit, then super-Eddington X-ray luminosities will be generated. The conditions that are required for the formation of such a wind are briefly discussed. Also developed are estimates for the spectral shape, color temperature, and X-ray luminosity resulting from the wind-disk interaction, and it is shown that these results are consistent with the observed properties of type I cosmic X-ray bursts.

Melia, F.↗

Spinning disk calibration method and apparatus for laser Doppler velocimeter

A method and apparatus for calibrating laser Doppler velocimeters having one or more intersecting beam pairs are described. These velocimeters measure fluid velocity by observing the light scattered by particles in the fluid stream. Moving fluid particulates are simulated by fine taut wires that are radially mounted on a disk that is rotated at a known velocity. The laser beam intersection locus is first aimed at the very center of the disk and then the disk is translated so that the locus is swept by the rotating wires. The radial distance traversed is precisely measured so that the velocity of the wires (pseudo particles) may be calculated.

Snyder, P. K.↗

Dwarf nova burst asymmetry and the physics of accretion disks

Far-ultraviolet observations of a burst of SS Cyg obtained with the Voyager spacecraft are presented along with optical observations. Representative V band and far-UV light curves are computed based on a thermal instability model, and the dependence of the far-UV delay and the shape of the outburst on the location in the disk where the outburst starts is examined. The results show that burst initiated at large radii produce asymmetric light curves for which the far-UV flux lags the optical flux by about half a day, as observed. For bursts starting at smaller radii, the delay is smaller and the outburst is more rounded and symmetric. For both burst types, the delay with respect to the optical is longer for larger accretion disks and at shorter wavelengths. The physical processes that will promote burst initiation in the outer disk are discussed, emphasizing that this can occur in principle with no modulation of the mass transfer rate from the companion.

Cannizzo, J. K.↗

Accretion disks and periodic outbursts of active galactic nuclei

The local thermal stability of accretion disks around supermassive black holes in active galactic nuclei is examined. Such disks are unstable at radii where the surface temperature is several thousand degrees. Supermassive disks therefore should undergo limit-cycle outbursts similar to those believed to occur in dwarf novae. Operating on a time scale of about 10,000 to 10 million yr and at radii of about 10 to the 15th to 10 to the 16th cm, this mechanism will result in alternating periods of higher and lower accretion rate onto the black hole and, consequently, higher and lower luminosity. Quasi-periodic outbursts on this time scale may be recorded in the structure of extended radio sources, a possible example being 4C 29.47. For accretion rates greater than 0.1 solar masses/yr, the situation is complicated by instabilities caused by self-gravitation and by the dominance of radiation pressure and electron scattering opacity.

Lin, D. N. C.↗

Compton-heated winds and coronae above accretion disks. II - Instability and oscillations

The stability and evolution of windy accretion disks is investigated in detail. The basic disk evolution equations are briefly recapitulated, and an idealized analytic treatment of the wind and viscosity is used to show that steady disk flow is indeed unstable for sufficiently large ratio of the mass loss rate in the wind to the central accretion rate. Numerical solutions for a more realistic and appropriate expression for the mass loss rate and the standard ad hoc alpha model prescription for the viscosity are presented. The application of these results to real systems with Compton-heated winds is discussed, and a general formula for the oscillation period is given. The prediction is compared with observed periodic behavior of Galactic X-ray sources and AGNs.

Shields, G. A.↗

Effect of design variables, temperature gradients and speed of life and reliability of a rotating disk

A generalized methodology to predict the fatigue life and reliability of a rotating disk such as used for aircraft engine turbines and compressors is advanced. The approach incorporates the computed life of elemental stress volumes to predict system life and reliability. Disk speed and thermal gradients as well as design variables such as disk diameter and thickness and bolt hole size, number and location are considered.

Zaretsky, E. V.↗

Collisional dynamics of perturbed particle disks in the solar system

Investigations of the collisional evolution of particulate disks subject to the gravitational perturbation of a more massive particle orbiting within the disk are underway. Both numerical N-body simulations using a novel collision algorithm and analytical kinetic theory are being employed to extend our understanding of perturbed disks in planetary rings and during the formation of the solar system. Particular problems proposed for investigation are: (1) The development and testing of general criteria for a small moonlet to clear a gap and produce observable morphological features in planetary rings; (2) The development of detailed models of collisional damping of the wavy edges observed on the Encke division of Saturn's A ring; and (3) The determination of the extent of runaway growth of the few largest planetesimals during the early stages of planetary accretion.

Roberts, W. W.↗

Influence of disk leakage path on labyrinth seal inlet swirl ratio

The results of numerous investigators have shown the importance of labyrinth seal inlet swirl on the calculated dynamic stiffness of labyrinth seals. These results have not included any calculation of inlet leakage swirl as a function of geometry and sealing conditions of the given seal. This paper outlines a method of calculating the inlet swirl at a given seal by introducing a radial chamber to predict the gas swirl as it goes from the stage tip down to the seal location. For a centrifugal compressor, this amounts to including the flow path from the impeller discharge, down the back of the disk or front of the cover, then into the shaft seal or eye packing, respectively. The solution includes the friction factors of both the disk and stationary wall with account for mass flow rate and calculation of radial pressure gradients by a free vortex solution. The results of various configurations are discussed and comparisons made to other published results of disk swirl.

Kirk, R. Gordon↗