Search NASA⌕ Search

SEARCH · Search NASA

Results for “disordered solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

The Effect of Synthetic Method and Annealing Temperature on Metal Site Preference in Al 1-x Ga x FeO 3

Magnetoelectric materials couple both magnetic and electronic properties, making them attractive for use in multifunctional devices. The magnetoelectric AFeO 3 compounds (Pna2 1 ; A = Al, Ga) have received attention as the properties of the system depend on composition as well as the synthetic method used. Al 1–x Ga x FeO 3 (0 ≤ x ≤ 1) was synthesized by the sol–gel and coprecipitation methods and studied by X-ray absorption near-edge spectroscopy (XANES). Al L 2,3⁻ , Ga K-, and Fe K-edge XANES spectra were collected to examine how the average metal coordination number (CN) changes with the synthetic method. Al and Fe were found to prefer octahedral sites, while Ga prefers the tetrahedral site. It was found that composition played a larger role in determining site occupancies than synthetic method. Samples made by the sol–gel or ceramic methods (reported previously; Walker, J. D. S.; Grosvenor, A. P. J. Solid State Chem. 2013, 197, 147–153) showed smaller spectral changes than samples made via the coprecipitation method. This is attributed to greater ion mobility in samples synthesized via coprecipitation as the reactants do not have a long-range polymeric or oxide network during synthesis like samples synthesized via the sol–gel or ceramic method. Increasing annealing temperature increases the average coordination number of Al, and to a lesser extent Ga, while the average coordination number of Fe decreases. This study indicates that greater disorder is observed when the Al 1–x Ga x FeO 3 compounds have high Al content, and when annealed at higher temperatures.

Walker, James D.S.↗

Sorbent-based Oxygen Production for Energy Systems

Project DE-FE0024075 deals with the development of a high-temperature sorbent-based oxygen production technology. Sorbent-based oxygen production process utilizes oxygen-storage properties of Perovskites to (1) adsorb oxygen from air in a solid sorbent, and (2) release the adsorbed oxygen into a sweep gas such as CO2 and/or steam for gasification systems or recycled flue gas for oxy-combustion systems. Pure oxygen can be produced by the use of vacuum instead of a sweep gas to affect the pressure swing. By developing more efficient and stable, higher sorption capacity, newer class of materials operating at lower temperatures this process represents a major advancement in air separation technology. Newly developed perovskite ceramic sorbent materials with order-disorder transition have a higher O 2 adsorption capacity, 200 ºC lower operating temperatures, and up to two orders of magnitude faster desorption rates than those used in earlier development efforts. The performance advancements afforded by the new materials lead to substantial savings in capital investment and operational costs. Cost of producing oxygen using sorbents could be as much as 60% lower than a cryogenic air separation unit.

01 COAL, LIGNITE, AND PEAT↗

Large Negative Thermal Expansion and Anomalous Behavior on Compression in Cubic ReO 3 -Type A II B IV F 6 : CaZrF 6 and CaHfF 6

CaZrF6 and CaHfF6 display much stronger negative thermal expansion (NTE) (alpha(L100 K) similar to -18 and -22 ppm K-1, respectively) than ZrW2O8 and other corner-shared framework structures. Their NTE is comparable to that reported for framework solids containing multiatom bridges, such as metal cyanides and metal-organic frameworks. However, they are formable as ceramics, transparent over a wide wavelength range and can be handled in air; these characteristics can be beneficial for applications. The NTE of CaZrF6 is strongly temperature-dependent, and first-principles calculations show that it is largely driven by vibrational modes below similar to 150 cm(-1). CaZrF6 is elastically soft with a bulk modulus (K-300K) of 37 GPa and, upon compression, starts to disorder at similar to 400 MPa. The strong NTE of CaZrF6, which remains cubic to <10 K, contrasts with cubic CoZrF6, which only displays modest NTE above its rhombohedral to cubic phase transition at similar to 270 K. CaZrF6 and CaHfF6 belong to a large and compositionally diverse family of materials, A(II)B(IV)F(6), providing for a detailed exploration of the chemical and structural factors controlling NTE and many opportunities for the design of controlled thermal expansion materials.

Hancock, Justin C.↗

Averaged cluster approach to including chemical short-range order in KKR-CPA

The single-site Korringa-Kohn-Rostoker coherent potential approximation (KKR-CPA) ignores short-range ordering present in disordered metallic systems. Here in this paper, we establish a technique to fix this shortcoming by embedding an averaged cluster that displays chemical short-range order (SRO). The degree of SRO can be tuned by externally defined order parameters. This averaged cluster can be embedded in the single-site CPA medium or a self-consistently obtained effective medium that contains SRO information. The validity of this method is demonstrated by applying it to two alloy systems—the CuZn body-centered cubic (BCC) solid solution, and AlCrTiV, a four-element BCC high entropy alloy. A comparison between the non-self-consistent and self-consistent modes is also provided for the two above-mentioned systems. We make the code available on the internet. Planned extensions to this paper are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polar behavior of double perovskite (Bi,Pb)ZnNbO6 and (Bi,Sr)ZnNbO6: Density functional calculations

The polar behavior of double perovskite (Bi,Pb)ZnNbO{sub 6} and (Bi,Sr)ZnNbO{sub 6} was investigated using first principles density functional calculations within the local density approximation. These materials have both A-site size disorder and ions with sterochemical activity. We found a strong ferroelectric distortion in both materials. The polarization of the Pb material is >80 muCcm{sup 2} along the rhombohedral direction and the Sr based material is only slightly inferior. The high polarization results mainly from a large off-centering of Bi and the large Born effective charge of Nb, which yields a large contribution polarization although the Nb off-centers by a smaller amount. Neither of these materials favors a tetragonal state, and therefore solid solutions with PbTiO{sub 3} may show morphotoropic phase boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sorbent-based Oxygen Production for Energy Systems

Project DE-FE0024075 deals with the development of a moderate-temperature sorbent-based oxygen production technology. Sorbent-based oxygen production process utilizes oxygen-storage properties of Perovskites to (1) adsorb oxygen from air in a solid sorbent, and (2) release the adsorbed oxygen into a sweep gas such as CO 2 and/or steam for gasification systems or recycled flue gas for oxy-combustion systems. Pure oxygen can be produced by the use of vacuum instead of a sweep gas to affect the pressure swing. By developing more efficient and stable, higher sorption capacity, newer class of materials operating at moderate temperatures this process represents a major advancement in air separation technology. Newly developed perovskite ceramic sorbent materials with order-disorder transition have a higher O 2 adsorption capacity, potentially 200 °C lower operating temperatures, and up to two orders of magnitude faster desorption rates than those used in earlier development efforts. The performance advancements afforded by the new materials lead to substantial savings in capital investment and operational costs. Cost of producing oxygen using sorbents could be as much as 26% lower than VPSA and about 13% lower than a large cryogenic air separation unit. Cost advantage against large cryogenic separation is limited because sorbent-based separation numbers up sorbent modules for achieving the larger capacity.

01 COAL, LIGNITE, AND PEAT↗

Sorbent-based Oxygen Production for Energy Systems

Project DE-FE0024075 deals with the development of a moderate-temperature sorbent-based oxygen production technology. Sorbent-based oxygen production process utilizes oxygen-storage properties of Perovskites to (1) adsorb oxygen from air in a solid sorbent, and (2) release the adsorbed oxygen into a sweep gas such as CO 2 and/or steam for gasification systems or recycled flue gas for oxy-combustion systems. Pure oxygen can be produced by the use of vacuum instead of a sweep gas to affect the pressure swing. By developing more efficient and stable, higher sorption capacity, newer class of materials operating at moderate temperatures this process represents a major advancement in air separation technology. Newly developed perovskite ceramic sorbent materials with order-disorder transition have a higher O 2 adsorption capacity, potentially 200 ºC lower operating temperatures, and up to two orders of magnitude faster desorption rates than those used in earlier development efforts. The performance advancements afforded by the new materials lead to substantial savings in capital investment and operational costs. Cost of producing oxygen using sorbents could be as much as 26% lower than VPSA and about 13% lower than a large cryogenic air separation unit. Cost advantage against large cryogenic separation is limited because sorbent-based separation numbers up sorbent modules for achieving the larger capacity.

01 COAL, LIGNITE, AND PEAT↗

Effect of metallurgical structure and properties on adhesion and friction behavior of cobalt alloys

The metallurgical structure and some of the mechanical properties of two cobalt alloys, cobalt-50% iron and cobalt-25% molybdenum-10% chromium, were determined under various heat treated conditions. The mechanical properties of the bcc disordered Co-50Fe alloy, which was found to be very brittle, indicated an exceedingly low fracture strength, low hardness, and very weak grain boundary strength. Ordering by suitable heat treatment only produced a more brittle material with a lower fracture strength and a slightly higher hardness value. Work hardening was found to produce a finer grain structure and a greater grain boundary strength. Tensile properties were examined. It was found that the Co-25Mo-10Cr alloy was difficult to place in the alpha Co solid solution condition, which limited the ability to use precipitation as a hardening reaction. Over two hundred adhesion cycles from zero contact load, to maximum load, to fracture were conducted between couples for each of the above alloys in an ultrahigh vacuum system which would permit the sample surfaces to be cleaned of all contaminant layers. In the Co-50Fe case, the calculated fracture stress from the adhesion tests showed values in the range of 80 to 150 k.s.i., which is about ten times greater than the values from tension tests.

Keller, D. V., Jr.↗

Charge Trapping in Bright and Dark States of Coupled PbS Quantum Dot Films

Analysis of photoluminescence (PL) from chemically treated lead sulfide (PbS) quantum dot (QD) films versus temperature reveals the effects of QD size and ligand binding on the motion of carriers between bright and dark trap states. For strongly coupled QDs, the PL exhibits temperature-dependent quenching and shifting consistent with charges residing in a shallow exponential tail of quasi-localized states below the band gap. The depth of the tail varies from 15 to 40 meV, similar to or smaller than exponential band tail widths measured for polycrystalline Si. The trap state distribution can be manipulated with QD size and surface treatment, and its characterization should provide a clearer picture of charge separation and percolation in disordered QD films than what currently exists.

14 SOLAR ENERGY↗

Reinforcing cycling stability and rate capability of LiNi0.5Mn1.5O4 cathode by dual-modification of coating and doping of a fast-ion conductor

Highlights: • Li{sub 2}SiO{sub 3}-modified LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} with well-defined octahedral morphology have been controllably obtained. • The combination of the modification of fast ions conductor and solid state method will be an optional method. • The cyclic performance and rate capability of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4}-based materials have been significantly improved. - Abstract: A simple solid state method was utilized to synthesize excellent spinel Li{sub 2}SiO{sub 3}-modified LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} cathodes. Dual-modification of coating and doping of fast-ion conductor Li{sub 2}SiO{sub 3} leads to stable crystal structure and additional three-dimensional (3-D) channels for Li{sup +}-ion diffusion, and protects the electrode surface from electrolyte attack. The Li{sub 2}SiO{sub 3}-modified material possesses coexistence of ordered P4{sub 3}32 and disordered Fd-3m phases. As a result of improved structure, morphology and conductivity, the Li{sub 2}SiO{sub 3}-modified LiNi{sub 0.5}Mn{sub 1.5}O{sub 4} shows more superior cyclic performance, rate capability and high temperature stability than the pristine: capacity retention of 95.17% at 0.1 C after 100 cycles vs. that of 79.23%; rate capability of 130–89.1 mAh g{sup −1} at 0.1–10 C vs. that of 120–57.6 mAh g{sup −1}; and high temperature capacity retention of 99.42% at 0.1 C vs. that of 79.59%. Our study provides a facile approach to stabilize crystal structure, optimize morphology and conductivity, and thus enhance electrochemical performance of LiNi{sub 0.5}Mn{sub 1.5}O{sub 4}-based materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microscopic Mechanisms of Superionic Na-ion Conductivity in Crystalline and Amorphous NaMOCl 4 (M = Nb, Ta) Solid Electrolytes

Sodium-ion solid electrolytes offer a sustainable route toward next-generation batteries, but few match the performance of their lithium counterparts. Halide-based NaMOCl 4 (M = Nb, Ta) has recently emerged as a promising analogue to LiMOCl 4 , yet its structure–transport relationships remain unclear due to poor crystallinity in experiments. Here, we combine density functional theory and machine-learned molecular dynamics to reveal that crystalline NaMOCl 4 exhibits negligible room-temperature conductivity with high activation barriers arising from vacancy-mediated diffusion below an order–disorder transition. Above this transition, rotational and translational motion of the [MO 2/2 Cl 4 – ] ∞ chains create new Na sites and enhances transport. In contrast, the amorphous phase inherently supports facile, three-dimensional Na diffusion through dynamic framework flexibility. These results show that ordered crystalline phases hinder ionic transport, while disorder – either thermally induced or structural – facilitates it, revising prior assumptions from the Li system and providing design principles for high-conductivity Na halide electrolytes.

Wei, Grace [University of California, Berkeley, CA↗

High‐Entropy Lithium Argyrodite Solid Electrolytes Enabling Stable All‐Solid‐State Batteries

Abstract Superionic solid electrolytes (SEs) are essential for bulk‐type solid‐state battery (SSB) applications. Multicomponent SEs are recently attracting attention for their favorable charge‐transport properties, however a thorough understanding of how configurational entropy (ΔS conf ) affects ionic conductivity is lacking. Here, we successfully synthesized a series of halogen‐rich lithium argyrodites with the general formula Li 5.5 PS 4.5 Cl x Br 1.5‐x (0≤x≤1.5). Using neutron powder diffraction and 31 P magic‐angle spinning nuclear magnetic resonance spectroscopy, the S 2− /Cl − /Br − occupancy on the anion sublattice was quantitatively analyzed. We show that disorder positively affects Li‐ion dynamics, leading to a room‐temperature ionic conductivity of 22.7 mS cm −1 (9.6 mS cm −1 in cold‐pressed state) for Li 5.5 PS 4.5 Cl 0.8 Br 0.7 (ΔS conf =1.98R). To the best of our knowledge, this is the first experimental evidence that configurational entropy of the anion sublattice correlates with ion mobility. Our results indicate the possibility of improving ionic conductivity in ceramic ion conductors by tailoring the degree of compositional complexity. Moreover, the Li 5.5 PS 4.5 Cl 0.8 Br 0.7 SE allowed for stable cycling of single‐crystal LiNi 0.9 Co 0.06 Mn 0.04 O 2 (s‐NCM90) composite cathodes in SSB cells, emphasizing that dual‐substituted lithium argyrodites hold great promise in enabling high‐performance electrochemical energy storage.

Chemistry↗

Hierarchy among the crystal lattice, charge density wave, and superconducting orders in transition metal dichalcogenides

Using high-energy x-ray scattering and large-scale three-dimensional (3D) structure modeling, in this study we investigate the relationship between the crystal lattice, charge density wave (CDW), and superconducting (SC) orders in transition metal dichalcogenides (TMDs). In particular, we systematically substitute Te for Se in Ta-Se-Te solid solutions, determine changes in their crystal lattice, and relate them to changes in the CDW transition temperature, $T_{CDW}$, and SC critical temperature, $T_c$ . We find that strong lattice distortions such as buckling of Ta layers are detrimental to the CDW and SC orders. The presence of a perfect lattice order in two dimensions is a prerequisite to the emergence of CDWs but insufficient to achieve a SC ordered state. For the SC order to emerge, the Ta sublattice should also appear periodic in 3D. Local chemical disorder may promote the SC order, and the perfectness of Ta coordination polyhedra is a factor contributing to its strength. A hierarchical relationship among the crystal lattice, CDW, and SC orders thus appears to exist in TMDs in a sense that different degrees of crystal lattice order-disorder promote and maintain the CDW and SC orders to a different extent, offering an opportunity to control the latter through modifying the former by rational design. Our findings are a step towards a better understanding of the correlation between lattice and electronic degrees of freedom in TMDs. We also demonstrate an efficient experimental approach to study them in fine detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman Study of the Structural Distortion in the Ni 1–x Co x TiO 3 Solid Solution

In this paper, Raman spectra were collected on Ni 1–x Co x TiO 3 (0 ≤ x ≤ 1) ilmenite samples as a function of the temperature between 4 and 1200 K. An evident symmetry lowering from the prototype R$\bar{3}$symmetry is observed. The distortion was largest for the x = 0.40 and 0.50 samples and significantly diminished for small and large values of x. The distortion was preserved in the whole temperature range and, except for the x = 0.50 sample, did not show significant changes. Notably, between 25 and 69 K, distortion of the x = 0.40 sample is accompanied by ferromagnetic order. The direct cation–cation and O-mediated indirect interactions are discussed as mechanisms behind the distortion and magnetic order. A reversible order–disorder phase transformation, assigned to occur between the ilmenite and corundum phases, took place at 973 K in the x = 0.50 sample. Completion of the transformation took over 1 h. Finally, the role of the overlap of Co/Ni and Ti 3d orbitals through O octahedral faces for charge transfer is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ethane and methane at high pressures: Structure and stability

We have performed a combined experimental and theoretical study of ethane and methane at high pressures of up to 120 GPa at 300 K using x-ray diffraction and Raman spectroscopies and the USPEX ab initio evolutionary structural search algorithm, respectively. For ethane, we have determined the crystallization point, for room temperature, at 2.7 GPa and also the low pressure crystal structure (phase A). This crystal structure is orientationally disordered (plastic phase) and deviates from the known crystal structures for ethane at low temperatures. Moreover, a pressure induced phase transition has been identified, for the first time, at 13.6 GPa to a monoclinic phase B, the structure of which is solved based on good agreement with the experimental results and theoretical predictions. For methane, our x-ray diffraction measurements are in agreement with the previously reported high-pressure structures and equation of state (EOS). Finally, we have determined the EOSs of ethane and methane, which provides a solid basis for the discussion of their relative stability at high pressures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the Role of Friction and Particle Size Distribution in Granular Packings

Packing of particles in a disordered arrangement has tremendous significance in both condensed matter physics and engineering applications. The last three decades have seen remarkable progress in our understanding of the physics of granular packings that has been largely facilitated by a rapid growth in the power of modern computers. Although granular packings are ubiquitous in diverse natural settings, from clogging of powders in hoppers to the crowding of living cells, a significant motivation for modeling granular packings has emerged from a proposal that the transition from a fluid-like state to a solid-like state of a granular material upon increasing volume fraction, called jamming, is intimately related to the origins of glass transition in thermal systems. As such, a majority of modeling efforts have focused on the jamming behavior of an idealized granular material: frictionless, monodisperse sphere. While such studies have illuminated the rich physics of jamming, granular materials in nature and engineering practice are rarely frictionless or monodisperse. The analogous research on the packing of these ‘real-world’ granular materials is still not fully developed. Besides requiring the exploration of a huge parameter space, three key computational considerations have inhibited their modeling: (i) traditional computational methods are not adept at simulating mechanically-stable packings of frictional particles near the jamming transition; (ii) standard algorithms of contact detection in discrete element methods are impractical to simulate granular packings with a wide distribution of particle sizes; (iii) a lack of well-established contact mechanics models of friction that can accurately reproduce experimental data. This chapter will review the latest computational advances to simulate the jamming of size-dispersed frictional particles, and describe the rich microstructural diversity that emerges in their packings.

granular↗

Centrosymmetry vs noncentrosymmetry in La{sub 2}Ga{sub 0.33}SbS{sub 5} and Ce{sub 4}GaSbS{sub 9} based on the interesting size effects of lanthanides: Syntheses, crystal structures, and optical properties

Two new quaternary sulfides La{sub 2}Ga{sub 0.33}SbS{sub 5} and Ce{sub 4}GaSbS{sub 9} have been prepared from stoichiometric elements at 1223 K in an evacuated silica tube. Interestingly, La{sub 2}Ga{sub 0.33}SbS{sub 5} crystallizes in the centrosymmetric structure, while Ce{sub 4}GaSbS{sub 9} crystallizes in the noncentrosymmetric structure, which show obvious size effects of lanthanides on the crystal structures of these two compounds. Ce{sub 4}GaSbS{sub 9} belongs to RE{sub 4}GaSbS{sub 9} (RE=Pr, Nd, Sm, Gd–Ho) structure type with a=13.8834(9) Å, b=14.3004(11) Å, c=14.4102(13) Å, V=2861.0(4) Å{sup 3}. The structure features infinite chains of [Ga{sub 2}Sb{sub 2}S{sub 11}{sup 10–}]{sub ∞} propagating along a direction separated by Ce{sup 3+} cations and S{sup 2−} anions. La{sub 2}Ga{sub 0.33}SbS{sub 5} adopts the family of La{sub 4}FeSb{sub 2}S{sub 10}-related structure with a=7.5193(6) Å, c=13.4126(17) Å, V=758.35(13) Å{sup 3}. Its structure is built up from the alternate stacking of La/Sb/S and La/Ga/S 2D building blocks. The La/Sb/S slabs consist of teeter-totter chains of Sb1S{sub 4} seesaws, which are connected via sharing the apexes of μ{sub 4}-S1. Moreover, La1 is positionally disordered with Sb1 and stabilized in a bicapped trigonal prismatic coordination sphere. Between these La/Sb/S slabs, La2S{sub 8} square antiprisms are connected via edge-sharing into 2D building blocks, creating tetrahedral sites partially occupied by the Ga1 atoms. UV/Vis diffuse reflectance spectroscopy study shows that the optical gap of La{sub 2}Ga{sub 0.33}SbS{sub 5} is about 1.76 eV. - Graphical abstract: Two new quaternary sulfides La{sub 2}Ga{sub 0.33}SbS{sub 5} and Ce{sub 4}GaSbS{sub 9} have been prepared by solid-state reactions. Ce{sub 4}GaSbS{sub 9} crystallizes in RE{sub 4}GaSbS{sub 9} (RE=Pr, Nd, Sm, Gd–Ho) structure type, while La{sub 2}Ga{sub 0.33}SbS{sub 5} belongs to the family of La{sub 4}FeSb{sub 2}S{sub 10}-related structure and exhibits an optical gap of 1.76 eV. - Highlights: • Two new quaternary sulfides La{sub 2}Ga{sub 0.33}SbS{sub 5} and Ce{sub 4}GaSbS{sub 9} have been prepared by solid-state reaction. • Ce{sub 4}GaSbS{sub 9} crystallizes in RE{sub 4}GaSbS{sub 9} (RE=Pr, Nd, Sm, Gd–Ho) structure type, while La{sub 2}Ga{sub 0.33}SbS{sub 5} belongs to the family of La{sub 4}FeSb{sub 2}S{sub 10}-related structure. • The optical gap of 1.76 eV for La{sub 2}Ga{sub 0.33}SbS{sub 5} was deduced from UV/Vis reflectance spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗