SEARCH · Search NASA

Results for “distributed”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Efficient Measurement of Length Distribution of 1D Nanoparticles in Solution via Optical Polarimetry

The efficient measurement of the length distribution of nanotubes, nanowires, and other one-dimensional (1D) nanoparticles in solution is important to enable their incorporation into materials and devices and to optimize their processing for properties of interest, such as thermal/electrical conductivity or mechanical strength, in suspensions and composites. We report an electric-field (E-field)-assisted optical-polarimetry technique to measure the length distribution of ensembles of high-aspect-ratio particles in dilute suspension. The degree of alignment of polarizable 1D particles suspended in a fluid under Brownian motion explicitly depends on the E-field strength and the particle length. We show that it is possible to extract the length distribution of 1D nanoparticles suspended in an insulating fluid by applying a range of E-fields and using optical polarimetry to measure the corresponding alignment order parameter. Notably, the method is relatively insensitive to the diameter of the 1D particles, which can be poorly known or vary within a sample. The technique is validated with silver nanowires and carbon nanotubes of known lengths, as well as polymer-depletion-length-separated single-wall carbon nanotube samples with length distributions independently measured with analytical ultracentrifugation. Finally, we demonstrate the ability of the optical-polarimetry technique to quantify changes in the length distribution of ultranarrow, sub-nanometer-diameter single-wall carbon nanotubes under different types and durations of ultrasonication. Within its range of applicability (polarizable 1D nanoparticles in the 0.5 to 15 μm length range, constrained by the voltage stability of the media and the suspended particles), the E-field-assisted optical-polarimetry method is a particularly efficient and accurate method to measure the length distribution of nanowires and nanotubes in suspension.

1D nanoparticles↗

DOE OSTI2023

Out-of-distribution generalization for learning quantum dynamics

Abstract Generalization bounds are a critical tool to assess the training data requirements of Quantum Machine Learning (QML). Recent work has established guarantees for in-distribution generalization of quantum neural networks (QNNs), where training and testing data are drawn from the same data distribution. However, there are currently no results on out-of-distribution generalization in QML, where we require a trained model to perform well even on data drawn from a different distribution to the training distribution. Here, we prove out-of-distribution generalization for the task of learning an unknown unitary. In particular, we show that one can learn the action of a unitary on entangled states having trained only product states. Since product states can be prepared using only single-qubit gates, this advances the prospects of learning quantum dynamics on near term quantum hardware, and further opens up new methods for both the classical and quantum compilation of quantum circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2020

Sample preparation with sucrose cryoprotection dramatically alters Zn distribution in the rodent hippocampus, as revealed by elemental mapping

Transition metal ions (Fe, Mn, Cu, Zn) are essential for healthy brain function, but altered concentration, distribution, or chemical form of the metal ions has been implicated in numerous brain pathologies. Currently, it is not possible to image the cellular or sub-cellular distribution of metal ions in vivo and therefore, studying brain-metal homeostasis largely relies on ex vivo in situ elemental mapping. Sample preparation methods that accurately preserve the in vivo elemental distribution are essential if one wishes to translate the knowledge of elemental distributions measured ex vivo toward increased understanding of chemical and physiological pathways of brain disease. Furthermore, the choice of sample preparation is particularly important for metal ions that exist in a labile or mobile form, for which the in vivo distribution could be easily distorted by inappropriate sample preparation. One of the most widely studied brain structures, the hippocampus, contains a large pool of labile and mobile Zn. Herein, we describe how sucrose cryoprotection, the gold standard method of preparing tissues for immuno-histochemistry or immuno-fluorescence, which is also often used as a sample preparation method for elemental mapping studies, drastically alters hippocampal Zn distribution. Based on the results of this study, in combination with a comparison against the strong body of published literature that has used either rapid plunge freezing of brain tissue, or sucrose cryo-protection, we strongly urge investigators in the future to cease using sucrose cryoprotection as a method of sample preparation for elemental mapping, especially if Zn is an analyte of interest.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

Strategy for distributed controller defence: Leveraging controller roles and control support groups to maintain or regain control in cyber-adversarial power systems

Distributed controllers play a prominent role in electric power grid operation. The coordinated failure or malfunction of these controllers is a serious threat, where the resulting mechanisms and consequences are not yet well-known and planned against. If certain controllers are maliciously compromised by an adversary, they can be manipulated to drive the system to an unsafe state. The authors present a strategy for distributed controller defence (SDCD) for improved grid tolerance under conditions of distributed controller compromise. The work of the authors’ first formalises the roles that distributed controllers play and their control support groups using controllability analysis techniques. With these formally defined roles and groups, the authors then present defence strategies for maintaining or regaining system control during such an attack. A general control response framework is presented here for the compromise or failure of distributed controllers using the remaining, operational set. The SDCD approach is successfully demonstrated with a 7-bus system and the IEEE 118-bus system for single and coordinated distributed controller compromise; the results indicate that SDCD is able to significantly reduce system stress and mitigate compromise consequences.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2017

Open-source framework for power system transmission and distribution dynamics co-simulation

The promise of the smart grid entails more interactions between the transmission and distribution networks, and there is an immediate need for tools to provide the comprehensive modelling and simulation required to integrate operations at both transmission and distribution levels. Existing electromagnetic transient simulators can perform simulations with integration of transmission and distribution systems, but the computational burden is high for large-scale system analysis. For transient stability analysis, currently there are only separate tools for simulating transient dynamics of the transmission and distribution systems. In this paper, we introduce an open source co-simulation framework “Framework for Network Co-Simulation” (FNCS), together with the decoupled simulation approach that links existing transmission and distribution dynamic simulators through FNCS. FNCS is a middleware interface and framework that manages the interaction and synchronization of the transmission and distribution simulators. Preliminary testing results show the validity and capability of the proposed open-source co-simulation framework and the decoupled co-simulation methodology.

Huang, Renke↗

DOE OSTI2019

Coordinative Real-time Sub-Transmission Volt-VAr Control for Reactive Power Regulation between Transmission and Distribution Systems

This paper introduces an integrated voltage regulation approach to coordinate the Volt-VAr control between transmission and distribution systems. Distributed photovoltaic (PV) systems are aggregated as a virtual power plant (VPP). At the sub-transmission level, a Coordinated Real-time Sub-Transmission Volt-VAr Control Tool (CReST-VCT) is introduced to coordinate the operation of the shunt devices and the reactive power provided by the VPPs. The CReST-VCT uses an enhanced Volt-VAr control algorithm with weighted voltage control objects that include minimizing losses, maintaining the voltage within desirable levels, and minimizing the number of mechanical switching of shunt elements. The algorithm runs every 5 minutes and is solved using AC optimal power flow (OPF) solution technique. The outputs include the settings for each sub-transmission-level Volt-VAr control devices and the reactive power generation requirements for each VPP. Then, each VPP will run a distribution Volt-VAr control algorithm to select the PV inverters that provide the Volt-VAr control services considering the distribution network topology. The goal of the VPP reactive power control is to meet the transmission level service requirements while maintaining the voltage and line flow in the distribution system within limits. Each VPP will update its voltage regulation capacity every 5 minutes to allow the CReST-VCT to formulate the optimization problem for the next dispatch interval. The proposed tool is simulated on Duke Energy Carolina system to demonstrate the capability of providing voltage support service by dispatching of reactive power of distributed PV as VPP.

Ke, Xinda↗

DOE OSTI2021

MIRACL Co‐Simulation platform for control and operation of distributed wind in microgrid

Abstract This paper presents a co‐simulation platform (CSP) developed as a part of the “Microgrids, Infrastructure Resilience and Advanced Controls Launchpad (MIRACL)” project, hereafter called MIRACL‐CSP, to allow simulation‐based testing, demonstration, and evaluations of distributed wind under various grid operating conditions. MIRACL‐CSP provides modular interactions among the power distribution system, distributed wind, and utility decision‐making framework. A hierarchical engine for large‐scale infrastructure co‐simulations (HELICS) is used as the core engine of MIRACL‐CSP to establish time and information coordination among the MIRACL‐CSP modules. In this study, MIRACL‐CSP performance is demonstrated using the IEEE 123‐node test distribution grid modelled in GridLAB‐D and the utility decision support application modelled in Python. The functionality of MIRACL‐CSP is demonstrated through various grid operational scenarios in a microgrid and networked microgrid environment. A co‐simulation study is described that demonstrated MIRACL‐CSP capabilities for the microgrid operational scenario in the IEEE 123‐node test system. MIRACL‐CSP is a generic platform that facilitates distributed wind research for different test systems, applications, and valuation of distributed wind.

17 WIND ENERGY↗

DOE OSTI2017

Broad ion energy distributions in helicon wave-coupled helium plasma

Helium ion energy distributions were measured in helicon wave-coupled plasmas of the dynamics of ion implantation and sputtering of surface experiment using a retarding field energy analyzer. The shape of the energy distribution is a double-peak, characteristic of radiofrequency plasma potential modulation. The broad distribution is located within a radius of 0.8 cm, while the quartz tube of the plasma source has an inner radius of 2.2 cm. The ion energy distribution rapidly changes from a double-peak to a single peak in the radius range of 0.7–0.9 cm. The average ion energy is approximately uniform across the plasma column including the double-peak and single peak regions. The widths of the broad distribution, ΔE, in the wave-coupled mode are large compared to the time-averaged ion energy, < E >. On the axis (r = 0), ΔE/< E > ≲ 3.4, and at a radius near the edge of the plasma column (r = 2.2 cm), ΔE/< E > ~1.2. In conclusion, the discharge parameter space is scanned to investigate the effects of the magnetic field, input power, and chamber fill pressure on the wave-coupled mode that exhibits the sharp radial variation in the ion energy distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

Distributed optical fiber sensing: Review and perspective

Over the past few decades, optical fibers have been widely deployed to implement various applications in high-speed long-distance telecommunication, optical imaging, ultrafast lasers, and optical sensors. Distributed optical fiber sensors characterized by spatially resolved measurements along a single continuous strand of optical fiber have undergone significant improvements in underlying technologies and application scenarios, representing the highest state of the art in optical sensing. This work is focused on a review of three types of distributed optical fiber sensors which are based on Rayleigh, Brillouin, and Raman scattering, and use various demodulation schemes, including optical time-domain reflectometry, optical frequency-domain reflectometry, and related schemes. Recent developments of various distributed optical fiber sensors to provide simultaneous measurements of multiple parameters are analyzed based on their sensing performance, revealing an inherent trade-off between performance parameters such as sensing range, spatial resolution, and sensing resolution. This review highlights the latest progress in distributed optical fiber sensors with an emphasis on energy applications such as energy infrastructure monitoring, power generation system monitoring, oil and gas pipeline monitoring, and geothermal process monitoring. This review aims to clarify challenges and limitations of distributed optical fiber sensors with the goal of providing a pathway to push the limits in distributed optical fiber sensing for practical applications.

Lu, Ping (ORCID:0000000292010956)↗

DOE OSTI2020

Local measurements of the spatial magnetic field distribution in a z-pinch plasma during and near stagnation using polarization spectroscopy

We present here the detailed measurements of radial distribution of the magnetic field in a gas-puff z-pinch plasma at the final stages of the implosion phase and at stagnation. While the measurements are chordal, the radial distribution of different charge states was utilized to measure the magnetic field locally for certain radii, so that unlike chordal measurements in general, the magnetic field radial distribution was obtained with no need for the Abel inversion of the data. The distribution was measured using the Zeeman effect via a novel spectroscopic technique, at several axial locations, and demonstrates striking features such as the peak field remaining at a radius much larger than the stagnation radius at all times. Furthermore, while the distribution observed is sometimes monotonic with respect to the radius, it is often not, a behavior that can be linked to 2D features in the plasma column resulting from the Rayleigh–Taylor instability. The current flowing through the stagnating plasma was found to be a small fraction of the total current, resulting in clearly insufficient magnetic pressure to balance the plasma pressure at stagnation. The magnetic field data, taken over several axial positions, are used to obtain the true inductance in the imploding plasma for the first time; it is found that the data cannot explain the current turnover at stagnation. A simulation with the MACH2-Tabular Collisional-Radiative Equilibrium magnetohydrodynamics code in the r–z plane shows that the peak of the magnetic field pinches to a much smaller radius than is observed in the spectroscopic data. Furthermore, the depth of the computed current turnover at stagnation is smaller than the measured one. The two observed features of a radially extended magnetic field at stagnation together with a deep current turnover are a challenge to match in simulations. Various calculations and estimates of the inductive and resistive load voltages are examined to ascertain if they are responsible for the observed current notch. Lastly, the results demonstrate that the knowledge of the true inductance in the driven load requires such magnetic-field-distribution measurements and that imaging data or electrical measurements are insufficient.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Plasma thermal transport with a generalized 8-moment distribution function

Moment equations that model plasma transport require an ansatz distribution function to close the system of equations. The resulting transport is sensitive to the specific closure used, and several options have been proposed in the literature. Two different 8-moment distribution functions can be generalized to form a single-parameter family of distribution functions. The transport coefficients resulting from this generalized distribution function can be expressed in terms of this free parameter. This provides the flexibility of matching the 8-moment model to some validating result at a given magnetization value, such as Braginskii’s transport, or the more recent results of Davies et al. [Physics of Plasma, 28, 012305 (2021)]. Here, this process can be thought of as solving for the 8-moment distribution function that matches the value of a transport coefficient given by a Chapman-Enskog expansion, while retaining the improved physical properties, such as finite propagation speeds and time dependence which belong to the hyperbolic moment models. Since the presented generalized distribution function only has a single free parameter, only a single transport coefficient can be matched at a time. However, this generalization process may be extended to provide multiple free parameters. The focus of this Brief Communication is on the dramatically improved thermal conductivity of the proposed model compared to the two base moment models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Mesoscale simulation of granular materials under weak shock compaction–pore size distribution effects

This research established a systematic method to generate various pore-size distributions (PSDs) and studied the effect of PSDs on the shock compaction response of granular materials using two-dimensional mesoscale simulations under identical porosity. Simulations utilized various PSDs for three particle shapes (circle, ellipse, and square). Contacting particle configurations using three PSDs, characterized by spatially uniform distributed pores to heterogeneous distributed pores, and non-contacting particle configurations under a single case of PSD were tested. The PSD of generated particle sets was characterized using coordination number, mean diameter, and bimodality coefficient as statistical metrics. Mesoscale simulations showed that regardless of the conditions of pore distributions, shock compaction of granular materials consistently demonstrates a precursor, shock compaction front, and end. However, the shock compaction velocity of contacting particles was dependent on the PSDs despite the constant initial porosity. The compaction velocity was faster in particle configurations with relatively uniform pore distributions than in heterogeneous pore distributions, which our study demonstrated can be attributed to particle rearrangement during compaction. Circular-shaped particles had high sensitivity in shock compaction response to the various PSDs. Furthermore, a contacting particle configuration tended to propagate the shock compaction wave relatively faster than particles that were in a non-contact configuration. This study established the relative importance of considering PSD as a metric over the coordination number in studies of the shock compaction response of granular materials. Further, insights are provided on the evolving shock substructure to characterize the shock compaction response of granular materials.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Multiplicity and pseudo-rapidity density distributions of charged particles produced in pp, pA and AA collisions at RHIC & LHC energies

Multiplicity and pseudorapidity (η) density (d N ch /dη) distributions of charged hadrons provide key information towards understanding the particle production mechanisms and initial conditions of high-energy heavy-ion collisions. However, detector constraints limit the η-range across which charged particle measurements can be carried out. Extrapolating the measured distributions to large η-range by parameterizing measured distributions and by using calculations from event generators, we characterize the production of charged particles over the full kinematic range. In the present study, we use three different ansätze to obtain quantitative descriptions of the shape of pseudorapidity distributions of charged hadrons produced in pp, p–A, and A–A collisions for beam energies ( s NN ) ranging from a few GeV to a few TeV corresponding to RHIC and LHC energies. We study the limiting fragmentation behavior in these collisions and report evidence for participant-scaling violations in high-energy collisions at the TeV scale. We additionally examine measured pseudorapidity distributions to constrain models describing initial conditions of particle production. We predict the centrality dependence of charged particle multiplicity distributions at FAIR and NICA energies and give an estimation of charged particle multiplicity at η = 0 for the proposed HE-LHC and FCC energies.

Physics↗

DOE OSTI2022

Orbit tomography of energetic particle distribution functions

Both fast ions and runaway electrons are described by distribution functions, the understanding of which are of critical importance for the success of future fusion devices such as ITER. Typically, energetic particle diagnostics are only sensitive to a limited subsection of the energetic particle phase-space which is often insufficient for model validation. However, previous publications show that multiple measurements of a single spatially localized volume can be used to reconstruct a distribution function of the energetic particle velocity-space by using the diagnostics' velocity-space weight functions, i.e. velocity-space Tomography. In this work we use the recently formulated orbit weight functions to remove the restriction of spatially localized measurements and present orbit tomography, which is used to reconstruct the 3D phase-space distribution of all energetic particle orbits in the plasma. Through a transformation of the orbit distribution, the full energetic particle distribution function can be determined in the standard {energy, pitch, r, z}-space. We benchmark the technique by reconstructing the fast-ion distribution function of an MHD-quiescent DIII-D discharge using synthetic and experimental FIDA measurements. We also use the method to study the redistribution of fast ions during a sawtooth crash at ASDEX upgrade using FIDA measurements. Lastly, a comparison between the orbit tomography and velocity-space tomography is shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Seabird distribution is better predicted by abundance of prey than oceanography. A case study in the Gulf of Cadiz (SW, Iberian Peninsula)

Abstract Quantifying factors that influence marine predator distributions is essential to understanding the current and future change in marine biodiversity. Here, we test whether marine predator distribution relates to prey, or is better predicted by other specific habitat features. We examine the correlation between spatial distribution of three seabird species and their prey, as well as environmental proxies (oceanographic characteristics) in the Gulf of Cadiz, NE Atlantic. We modeled the at-sea distribution of Cory's shearwater, Balearic shearwater and Northern gannet, based on: (i) pelagic fish abundance according to acoustic surveys, and (ii) a forecast-model of remotely sensed environmental variables (productivity, sea surface temperature, and salinity). In general, seabird distributions were better predicted by abundance of fish than by environmental variables at the habitat scale. We obtained consistent correlations between seabird presence and the abundance of medium-sized (10–20 cm) sardines, anchovies and Mediterranean horse mackerel, providing information on their preferred prey. Additionally, oceanographic productivity variables moderately contributed to seabird distribution models, with better predictive value for the critically endangered Balearic shearwater and Northern gannet in the summer, whilst the model for Cory's shearwater's produced poorer predictions. Predator–prey combined studies may represent essential tools for an efficient ecosystem-based management of marine environments.

de la Cruz, Andrés (ORCID:0000000203632498)↗

DOE OSTI2022

Impact of bar resonances in the velocity–space distribution of the solar neighbourhood stars in a self-consistent N -body Galactic disc simulation

ABSTRACT The velocity–space distribution of the solar neighbourhood stars shows complex substructures. Most of the previous studies use static potentials to investigate their origins. Instead we use a self-consistent N-body model of the Milky Way, whose potential is asymmetric and evolves with time. In this paper, we quantitatively evaluate the similarities of the velocity–space distributions in the N-body model and that of the solar neighbourhood, using Kullback–Leibler divergence (KLD). The KLD analysis shows the time evolution and spatial variation of the velocity–space distribution. The KLD fluctuates with time, which indicates the velocity–space distribution at a fixed position is not always similar to that of the solar neighbourhood. Some positions show velocity–space distributions with small KLDs (high similarities) more frequently than others. One of them locates at $(R,\phi)=(8.2\,\,\rm{\mathrm{kpc}}, 30^\circ)$, where R and ϕ are the distance from the galactic centre and the angle with respect to the bar’s major axis, respectively. The detection frequency is higher in the inter-arm regions than in the arm regions. In the velocity maps with small KLDs, we identify the velocity–space substructures, which consist of particles trapped in bar resonances. The bar resonances have significant impact on the stellar velocity–space distribution even though the galactic potential is not static.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2026

Empirical investigation of nuclear correlation function distributions in lattice QCD

Two-point correlation functions of systems with baryon number 𝐵 ∈ {1,2,3,4} are investigated using lattice quantum chromodynamics (QCD). In particular, the empirical distributions of importance-sampling Monte-Carlo samples of these correlation functions are examined as a function of the spacetime separation between the two points and the baryon number. While the exact forms of these distributions are not known for QCD, recent work has determined asymptotic expressions for analogous correlation function distributions in simpler theories such as scalar field theory and the disordered phase of the 𝑂⁡(𝑁) model. The theoretical 𝑂⁡(𝑁) model distributions are found to provide an accurate description of the empirical QCD distributions at zero momentum over a wide range of temporal separations for each baryon number when assessed with a range of different statistical tests. In particular, the behavior of the baryon number 𝐵 QCD correlation function at large temporal separation is well reproduced by the 𝑂⁡(𝑁 ∼ 2/𝐵) model distribution.

Lattice field theory↗

DOE OSTI2021

Constructing angular distributions of neutrinos in core-collapse supernovae from zeroth and first moments calibrated by full Boltzmann neutrino transport

Two-moment neutrino transport methods have been widely used for developing theoretical models of core-collapse supernovae (CCSN), since they substantially reduce the computational burden inherent in the multidimensional neutrino-radiation hydrodynamical simulations. The approximation, however, comes at a price; the detailed structure of angular distribution of neutrinos is sacrificed, that is the main drawback of this approach. In this paper, we develop a novel method by which to construct angular distributions of neutrinos from the zeroth and first angular moments. In our method, the angular distribution is expressed with two quadratic functions of the neutrino angle in a piecewise fashion. We determine the best parameters in the fitting function by comparing to the neutrino data in a spherically symmetric CCSN model with full Boltzmann neutrino transport. We demonstrate the capability of our method by using our recent 2D CCSN model. In this work, we find that the essential features of the angular distributions can be well reconstructed, whereas the angular distributions of incoming neutrinos tend to have large errors that increase with flux factor ($\textit{κ}$). This issue originates from the insensitiveness of incoming neutrinos to $\textit{κ}$, that is an intrinsic limitation in moment methods. Based on the results of the demonstration, we assess the reliability of electron- neutrinos lepton number (ELN)-crossing searches with the two-moment neutrino transport. This analysis is complementary to our [L. Johns and H. Nagakura arXiv:2104.04106] that scrutinizes the limitation of crossing searches with a few moments. We find that the systematic errors of angular distributions for incoming neutrinos lead to misjudgements of the crossing at $\textit{κ}$ ≳ 0.5. This casts doubt on the results of ELN-crossing searches based on two-moment methods in some previous studies.

79 ASTRONOMY AND ASTROPHYSICS↗