Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamic programming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Simulation capability for dynamics of two-body flexible satellites

An analysis and computer program were prepared to realistically simulate the dynamic behavior of a class of satellites consisting of two end bodies separated by a connecting structure. The shape and mass distribution of the flexible end bodies are arbitrary; the connecting structure is flexible but massless and is capable of deployment and retraction. Fluid flowing in a piping system and rigid moving masses, representing a cargo elevator or crew members, have been modeled. Connecting structure characteristics, control systems, and externally applied loads are modeled in easily replaced subroutines. Subroutines currently available include a telescopic beam-type connecting structure as well as attitude, deployment, spin and wobble control. In addition, a unique mass balance control system was developed to sense and balance mass shifts due to the motion of a cargo elevator. The mass of the cargo may vary through a large range. Numerical results are discussed for various types of runs.

Austin, F.↗
NASA NTRS1990

Performance of an optimized rotor blade at off-design flight conditions

An investigation is made of the dynamic and aerodynamic performance of a helicopter rotor previously optimized for minimum 4/rev vertical shear and blade weight subject to certain dynamic and structural constraints. The program CAMRAD which was used in designing the optimized blade is used for both dynamic and aerodynamic analaysis. The behavior of the optimized rotor is analyzed over a wide range of operating conditions and for a larger number of rotor characteristics than those considered in designing the blade. To assess the dynamic behavior, the blade root vibratory shears and moments that are transmitted to the rotor hub are calculated. The aerodynamic performance assessments are made based on the power required by the rotor for a given rotor task, the rotor lifting efficiencies, maximum rotor thrust envelopes and the control margins. Results are presented for the optimized blade and the control margins. Results are presented for the optimized blade and the reference blade, which was used as the baseline for the optimized blade, for two rotor tasks.

Chattopadhyay, Aditi↗
NASA NTRS1990

Performance of an optimized rotor blade at off-design flight conditions

An investigation is made of the dynamic and aerodynamic performance of a helicopter rotor previously optimized for minimum 4/rev vertical shear and blade weight subject to certain dynamic and structural constraints. The program CAMRAD which was used in designing the optimized blade is used for both dynamic and aerodynamic analysis. The behavior of the optimized rotor is analyzed over a wide range of operating conditions and for a larger number rotor characteristics than those considered in designing the blade. To assess the dynamic behavior, the blade root vibratory shears and moments that are transmitted to the rotor hub are calculated. The aerodynamic performance assessments are made based on the power required by the rotor for a given rotor task, the rotor lifting efficiencies, maximum rotor thrust envelopes and the control margins. Results are presented for the optimized blade and the reference blade which was used as the baseline for the optimized blade, for two rotor tasks.

Chattopadhyay, Aditi↗
NASA NTRS2016

Evolution of Flexible Multibody Dynamics for Simulation Applications Supporting Human Spaceflight

During the course of transition from the Space Shuttle and International Space Station programs to the Orion and Journey to Mars exploration programs, a generic flexible multibody dynamics formulation and associated software implementation has evolved to meet an ever changing set of requirements at the NASA Johnson Space Center (JSC). Challenging problems related to large transitional topologies and robotic free-flyer vehicle capture/ release, contact dynamics, and exploration missions concept evaluation through simulation (e.g., asteroid surface operations) have driven this continued development. Coupled with this need is the requirement to oftentimes support human spaceflight operations in real-time. Moreover, it has been desirable to allow even more rapid prototyping of on-orbit manipulator and spacecraft systems, to support less complex infrastructure software for massively integrated simulations, to yield further computational efficiencies, and to take advantage of recent advances and availability of multi-core computing platforms. Since engineering analysis, procedures development, and crew familiarity/training for human spaceflight is fundamental to JSC's charter, there is also a strong desire to share and reuse models in both the non-realtime and real-time domains, with the goal of retaining as much multibody dynamics fidelity as possible. Three specific enhancements are reviewed here: (1) linked list organization to address large transitional topologies, (2) body level model order reduction, and (3) parallel formulation/implementation. This paper provides a detailed overview of these primary updates to JSC's flexible multibody dynamics algorithms as well as a comparison of numerical results to previous formulations and associated software.

Multibody dynamics↗
NASA NTRS1991

Integrated analysis and design for controlled nonlinear multibody systems

A hybrid approach for integrated analysis and design of nonlinear multibody systems is proposed. Based on the approach, a general-purpose design tool is developed for nonlinear dynamic systems subjected to nonlinear design constraints. For analysis purposes, second-order nonlinear equations of motion of the system are automatically generated using general-purpose multibody formulations. Once the equations are solved, they are written in first-order form to take advantage of the first-order formulations of design sensitivity analysis for dynamic systems. A nonlinear programming technique is then used to optimize the nonlinear systems, such that a nonlinear cost function is minimized and performance constraints are satisfied. The approach proved to be very general and useful for design and analysis of controlled multibody systems. The approach is applied to the design of passive dynamic controllers for slewing control of multibody systems.

Wu, Shih-Chin↗
NASA NTRS1984

Decennial Specialists' Meeting on Rotorcraft Dynamics, 2nd, Moffett Field, CA, November 7-9, 1984, Proceedings

Various papers on helicopter rotor technology are presented. The subjects considered include: ground resonance analysis using a substructure modelling approach, aerolastic stability of a bearingless rotor, experimentally determined flutter from two and three-bladed model bearingless rotors in hover, lifting surface theory for a helicopter rotor in forward flight, aeroelastic considerations for torsionally soft rotors, and restructuring of a rotor analysis program. Also discussed are: dynamic inflow and its effect on experimental correlations, flap-lag-torsion instability in forward flight, dynamic stability of a bearingless circulation control rotor blade in hover, dynamic response characteristics of a circulation control rotor model pneumatic system, the relations between vibratory loads and airframe vibrations, coupled rotor body vibrations with in-plane degrees of freedom, helicopter vibration reduction concepts.

Source record↗
NASA NTRS1988

Shuttle rocket booster computational fluid dynamics

Additional results and a revised and improved computer program listing from the shuttle rocket booster computational fluid dynamics formulations are presented. Numerical calculations for the flame zone of solid propellants are carried out using the Galerkin finite elements, with perturbations expanded to the zeroth, first, and second orders. The results indicate that amplification of oscillatory motions does indeed prevail in high frequency regions. For the second order system, the trend is similar to the first order system for low frequencies, but instabilities may appear at frequencies lower than those of the first order system. The most significant effect of the second order system is that the admittance is extremely oscillatory between moderately high frequency ranges.

Chung, T. J.↗
NASA NTRS2004

Numerical, Analytical, Experimental Study of Fluid Dynamic Forces in Seals: Description of Seal Dynamics Code DYSEAL and Labyrinth Seals Code KTK - Volume 5

The objectives of the program were to develop computational fluid dynamics (CFD) codes and simpler industrial codes for analyzing and designing advanced seals for air-breathing and space propulsion engines. The CFD code SCISEAL is capable of producing full three-dimensional flow field information for a variety of cylindrical configurations. An implicit multidomain capability allow the division of complex flow domains to allow optimum use of computational cells. SCISEAL also has the unique capability to produce cross-coupled stiffness and damping coefficients for rotordynamic computations. The industrial codes consist of a series of separate stand-alone modules designed for expeditious parametric analyses and optimization of a wide variety of cylindrical and face seals. Coupled through a Knowledge-Based System (KBS) that provides a user-friendly Graphical User Interface (GUI), the industrial codes are PC based using an OS/2 operating system. These codes were designed to treat film seals where a clearance exists between the rotating and stationary components. Leakage is inhibited by surface roughness, small but stiff clearance films, and viscous pumping devices. The codes have demonstrated to be a valuable resource for seal development of future air-breathing and space propulsion engines

Shapiro, Wilbur↗
NASA NTRS1977

High frequency dynamic engine simulation

A digital computer simulation of a mixed flow, twin spool turbofan engine was assembled to evaluate and improve the dynamic characteristics of the engine simulation to disturbance frequencies of at least 100 Hz. One dimensional forms of the dynamic mass, momentum and energy equations were used to model the engine. A TF30 engine was simulated so that dynamic characteristics could be evaluated against results obtained from testing of the TF30 engine at the NASA Lewis Research Center. Dynamic characteristics of the engine simulation were improved by modifying the compression system model. Modifications to the compression system model were established by investigating the influence of size and number of finite dynamic elements. Based on the results of this program, high frequency engine simulations using finite dynamic elements can be assembled so that the engine dynamic configuration is optimum with respect to dynamic characteristics and computer execution time. Resizing of the compression systems finite elements improved the dynamic characteristics of the engine simulation but showed that additional refinements are required to obtain close agreement simulation and actual engine dynamic characteristics.

Schuerman, J. A.↗
NASA NTRS1991

Large angle transient dynamics (LATDYN) documentation. Post-processor manual

The post processor program was developed to view Large Angle Transient Dynamics (LATDYN) output data in predefined, predetermined formats. The post processor is used for plotting data, creating and maintaining a data base of plotting requests, comparing and manipulating data sets in the data base, and the preparing plots for documentation.

Mitchum, Maria V.↗
NASA NTRS2004

Aeroheating and Aerodynamic CFD Validation And Prediction for The X-38 Program

This paper presents the results of a computational fluid dynamics validation exercise using the General Aerodynamic Simulation Program (GASP) code for vehicles under consideration for the X-38 program. The scope of the exercise involved simulation and comparison with wind tunnel aeroheating and aerodynamic data in the hypersonic regime. In addition, simulations were performed and results are presented for the full-scale flight vehicle along an expected re- entry trajectory.

Loomis, Mark P.↗
DOE OSTI2026

Tailoring Crosslinks through Time─A Paradigm for Tough Hydrogels

The multidisciplinary applications of hydrogels have motivated a thorough exploration of the relationship between their structural and mechanical properties, i.e., spatial structure–function relationships, with particular regard to strength and toughness. While this approach has driven fundamental advancements in the design of robust hydrogel structures, further complementary perspectives are needed to enable holistic, rational design schemes that integrate considerations such as fabrication and advanced functions like response and adaptation. To these ends, this review focuses on the dynamics of temporal-function relationships and their fundamental bases in order to highlight how the dynamic regulation of polymer interactions programs: 1) polymer assembly and material structure; 2) response to deformation and fracture behavior; 3) dynamic modulation of properties and structural remodeling/self-healing. Here, by exploring this intersection of hydrogel formation, function, and remodeling, this review seeks to shed light on the fundamental relationship between molecular structure, material assembly, and performance in order to connect the emerging area of bioinspired materials processing with tough hydrogel design, and further provides a lasting inspiration and impetus for future hydrogel development that enables valuable scientific and technological advancements.

36 MATERIALS SCIENCE↗
NASA NTRS1974

SEASAT economic assessment

The SEASAT program will provide scientific and economic benefits from global remote sensing of the ocean's dynamic and physical characteristics. The program as presently envisioned consists of: (1) SEASAT A; (2) SEASAT B; and (3) Operational SEASAT. This economic assessment was to identify, rationalize, quantify and validate the economic benefits evolving from SEASAT. These benefits will arise from improvements in the operating efficiency of systems that interface with the ocean. SEASAT data will be combined with data from other ocean and atmospheric sampling systems and then processed through analytical models of the interaction between oceans and atmosphere to yield accurate global measurements and global long range forecasts of ocean conditions and weather.

Hicks, K.↗
NASA NTRS1975

Effect of damping on excitability of high-order normal modes

The effect of localized structural damping on the excitability of higher-order large space telescope spacecraft modes is investigated. A preprocessor computer program is developed to incorporate Voigt structural joint damping models in a finite-element dynamic model. A postprocessor computer program is developed to select critical modes for low-frequency attitude control problems and for higher-frequency fine-stabilization problems. The selection is accomplished by ranking the flexible modes based on coefficients for rate gyro, position gyro, and optical sensor, and on image-plane motions due to sinusoidal or random PSD force and torque inputs.

Merchant, D. H.↗
NASA NTRS1977

Air-cushion landing systems

Computer program based on heave/pitch analysis simulates dynamic behavior during landing impact and taxi over irregular runway. Program can be adapted to run on any computer with FORTRAN compiler.

Captain, K. M.↗
NASA NTRS1992

Liquid propulsion turbomachinery model testing

For the past few years an extensive experimental program to understand the fluid dynamics of the Space Shuttle Main Engine hot gas manifold has been in progress. This program includes models of the Phase II and II+ manifolds for each of the air and water flow facilities, as well as two different turbine flow paths and two simulated power levels for each manifold. All models are full-scale (geometric). The water models are constructed partially of acrylic to allow flow visualization. The intent of this paper is to discuss the concept, including the test objectives, facilities, and models, and to summarize the data for an example configuration, including static pressure data, flow visualization, and the solution of a specific flow problem.

Mcdaniels, David M.↗
NASA NTRS1974

Collaborative research in cardiovascular dynamics and bone elasticity

A collaborative research program covering a variety of topics of biomechanics and biomedical engineering within the fields of cardiovascular dynamics, respiration, bone elasticity and vestibular physiology is described. The goals of the research were to promote: (1) a better understanding of the mechanical behavior of the circulatory system and its control mechanisms; (2) development of noninvasive methods of measuring the changes in the mechanical properties of blood vessels and other cardiovascular parameters in man; (3) application of these noninvasive methods to examine in man the physiological effects of environmental changes, including earth-simulated gravitational changes; and (4) development of in-flight methods for studying the events which lead to post-flight postural hypotension.

Source record↗
NASA NTRS1984

Aircraft penetrations of arc cloud lines

Results of a NOAA/NASA research field program (1982-1983) which focused on dynamic and thermodynamic characterization of arc cloud lines are discussed. The program combines research aircraft flights with rapid-scan (3-minute interval) GOES imagery and covers the subcloud layer above and below the density surge line. Strong differences in the dynamic characteristics of air are noted to exist within and above the density surge line (DSL); air motions within the DSL are much more turbulent, with stronger upward and downward motions, than in the subcloud layer above the DSL. The arc cloud lines and the associated DSL regions are concluded to pose an extreme potential hazard to aircraft and Space Shuttle operations.

Sinclair, P. C.↗