Search NASA⌕ Search

SEARCH · Search NASA

Results for “electronic levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Inner Radiation Belt Representation of the Energetic Electron Environment: Model and Data Synthesis Using the Salammbo Radiation Belt Transport Code and Los Alamos Geosynchronous and GPS Energetic Particle Data

The highly energetic electron environment in the inner magnetosphere (GEO inward) has received a lot of research attention in resent years, as the dynamics of relativistic electron acceleration and transport are not yet fully understood. These electrons can cause deep dielectric charging in any space hardware in the MEO to GEO region. We use a new and novel approach to obtain a global representation of the inner magnetospheric energetic electron environment, which can reproduce the absolute environment (flux) for any spacecraft orbit in that region to within a factor of 2 for the energy range of 100 KeV to 5 MeV electrons, for any levels of magnetospheric activity. We combine the extensive set of inner magnetospheric energetic electron observations available at Los Alamos with the physics based Salammbo transport code, using the data assimilation technique of "nudging". This in effect input in-situ data into the code and allows the diffusion mechanisms in the code to interpolate the data into regions and times of no data availability. We present here details of the methods used, both in the data assimilation process and in the necessary inter-calibration of the input data used. We will present sample runs of the model/data code and compare the results to test spacecraft data not used in the data assimilation process.

Friedel, R. H. W.↗

Sampling and position effects in the Electronically Steered Thinned Array Radiometer (ESTAR)

A simple engineering level model of the Electronically Steered Thinned Array Radiometer (ESTAR) is developed that allows an identification of the major effects of the sampling process involved with this technique. It is shown that the ESTAR approach is sensitive to aliasing and has a highly non-uniform sensitivity profile. It is further shown that the ESTAR approach is strongly sensitive to position displacements of the low-density sampling antenna elements.

Katzberg, Stephen J.↗

Experimental and theoretical study for InAs quantum dashes-in-a-step-well structure on (001)-oriented InP substrate

An InAs/In{sub 0.73}Ga{sub 0.27}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.53}Al{sub 0.235}Ga{sub 0.235}As quantum dashes-in-a-step-well (QDSWELL) structure grown via molecular beam epitaxy has been studied. It is observed that the photoluminescence (PL) emission wavelength of such a structure can be as long as 2.12 {mu}m at room temperature (RT). This is the longest emission wavelength of InAs QDashes to be realized at RT. The electron and hole energy levels of the InAs/In{sub 0.73}Ga{sub 0.27}As/In{sub 0.53}Ga{sub 0.47}As/In{sub 0.53}Al{sub 0.235}Ga{sub 0.235}As QDSWELL structure have been calculated using effective-mass envelope-function theory. The calculated transition energy E{sub E1-HH1} (from the first electron energy level E1 to the first heavy-hole energy level HH1) agrees with the measured PL emission peak position quite well. It is found that QDSWELL is an alternative structure for realizing lasers with wavelengths beyond 2 {mu}m at RT.

36 MATERIALS SCIENCE↗

Secondary electron emission characteristics of ion-textured copper and high-purity isotropic graphite surfaces

Experimentally determined values of true secondary electron emission and relative values of reflected primary electron yield for untreated and ion textured oxygen free high conductivity copper and untreated and ion textured high purity isotropic graphite surfaces are presented for a range of primary electron beam energies and beam impingement angles. This investigation was conducted to provide information that would improve the efficiency of multistage depressed collectors (MDC's) for microwave amplifier traveling wave tubes in space communications and aircraft applications. For high efficiency, MDC electrode surfaces must have low secondary electron emission characteristics. Although copper is a commonly used material for MDC electrodes, it exhibits relatively high levels of secondary electron emission if its surface is not treated for emission control. Recent studies demonstrated that high purity isotropic graphite is a promising material for MDC electrodes, particularly with ion textured surfaces. The materials were tested at primary electron beam energies of 200 to 2000 eV and at direct (0 deg) to near grazing (85 deg) beam impingement angles. True secondary electron emission and relative reflected primary electron yield characteristics of the ion textured surfaces were compared with each other and with those of untreated surfaces of the same materials. Both the untreated and ion textured graphite surfaces and the ion treated copper surface exhibited sharply reduced secondary electron emission characteristics relative to those of untreated copper. The ion treated graphite surface yielded the lowest emission levels.

Curren, A. N.↗

Electron mobility on the surface of liquid Helium: influence of surface level atoms and depopulation of lowest subbands

The temperature dependence of electron mobility is examined. We calculate the contribution to the electron scattering rate from the surface level atoms (SLAs), proposed in [10]. This contribution is substantial at low temperatures T < 0.5, when the He vapor concentration is exponentially small. We also study the effect of depopulation of the lowest energy subband, which leads to an increase in the electron mobility at high temperature. The results explain certain long-standing discrepancies between the existing theory and experiment on electron mobility on the surface of liquid helium.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Significant disparity of non-basal dislocation activities in hot-rolled highly-textured Mg and Mg-3Al-1Zn alloy under tension

It is well-established that Mg-3Al-1Zn (AZ31) alloy exhibits much better tensile ductility than pure Mg. However, the underlying mechanisms for such difference still remain relatively unexplored at the dislocation level. In this work, we deformed hot-rolled highly-textured pure Mg and AZ31 samples with similar initial microstructures (i.e., grain size and texture) under tension along the rolling direction. Apparent shear banding was only observed in the pure Mg samples from the early stage of the deformation. Shear bands could act as easy paths for crack propagation, leading to low ductility in pure Mg. Apparent shear banding was not noted in deformed AZ31 samples. We then investigated the deformation mechanisms at the dislocation level using transmission electron microscopy. Systematic tilting experiments and statistical analyses of multiple grains at different strain levels revealed a significant disparity of non-basal dislocation activities between pure Mg and AZ31. For pure Mg, dislocations were activated since the early stage of plastic deformation. For AZ31, dislocations were mostly absent at all strain levels, even in the strain-to-failure samples. Non-basal dislocations, including prismatic and pyramidal dislocations, were observed. The promotion of the non-basal dislocation activities and the suppression of dislocations in AZ31 are expected to offer more sustainable hardening, which could elucidate the absence of apparent shear banding and much-improved ductility in AZ31 compared to pure Mg.

Zhao, Dexin↗

Electron mobility on the surface of liquid Helium: influence of surface level atoms and depopulation of lowest subbands

The temperature dependence of electron mobility is examined. We calculate the contribution to the electron scattering rate from the surface level atoms (SLAs), proposed in [10]. This contribution is substantial at low temperatures T < 0.5, when the He vapor concentration is exponentially small. We also study the effect of depopulation of the lowest energy subband, which leads to an increase in the electron mobility at high temperature. The results explain certain long-standing discrepancies between the existing theory and experiment on electron mobility on the surface of liquid helium.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic Structure of La(sub 1-x)Ca(sub x)CoO(sub 3) (x = 0, 0.5)

X-ray photoemission measurements of the core levels and valence electronic structure of LaCoO(sub 3) and La(sub 0.5)Ca0.5CoO(sub 3) high quality epitaxial films are presented. Shifts of the core levels and main valence band features are consistent with a doping-induced change in the chemical potential.

epitaxial films Fermi level↗

Theory of electron Zitterbewegung in graphene probed by femtosecond laser pulses

We propose an experiment allowing an observation of Zitterbewegung (ZB, trembling motion) of electrons in graphene in the presence of a magnetic field. In contrast to the existing theoretical work we make no assumptions concerning shape of the electron wave packet. A femtosecond Gaussian laser pulse excites electrons from the valence n=-1 Landau level into three other levels, creating an oscillating electron wave packet with interband and intraband frequencies. Oscillations of an average position of the packet are directly related to the induced dipole moment and oscillations of the average packet's acceleration determine emitted electric field. Both quantities can be measured experimentally. A broadening of Landau levels is included to make the description of ZB as realistic as possible. Criteria of realization of a ZB experiment are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The non-thermal origin of the tokamak low-density stability limit

DIII-D plasmas at very low density exhibit onset of n=1 error field (EF) penetration (the `low-density locked mode') not at a critical density or EF, but instead at a critical level of runaway electron (RE) intensity. Raising the density during a discharge does not avoid EF penetration, so long as RE growth proceeds to the critical level. Penetration is preceded by non-thermalization of the electron cyclotron emission, anisotropization of the total pressure, synchrotron emission shape changes, as well as decreases in the loop voltage and bulk thermal electron temperature. The same phenomena occur despite various types of optimal EF correction, and in some cases modes are born rotating. Similar phenomena are also found at the low-density limit in JET. These results stand in contrast to the conventional interpretation of the low-density stability limit as being due to residual EFs and demonstrate a new pathway to EF penetration instability due to REs. Existing scaling laws for penetration project to increasing EF sensitivity as bulk temperatures decrease, though other possible mechanisms include classical tearing instability, thermo-resistive instability, and pressure-anisotropy driven instability. Regardless of first-principles mechanism, known scaling laws for Ohmic energy confinement combined with theoretical RE production rates allow rough extrapolation of the RE criticality condition, and thus, the low-density limit to other tokamaks. Furthermore, the extrapolated low-density limit by this pathway decreases with increasing machine size and is considerably below expected operating conditions for ITER. While likely unimportant for ITER, this effect can explain the low-density limit of existing tokamaks operating with small residual EFs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Growth and decay of runaway electrons above the critical electric field under quiescent conditions

Extremely low density operation free of error field penetration supports the excitation of trace-level quiescent runaway electron (RE) populations during the flat-top of DIII-D Ohmic discharges. Operation in the quiescent regime allows accurate measurement of all key parameters important to RE excitation, including the internal broadband magnetic fluctuation level. RE onset is characterized and found to be consistent with primary (Dreicer) generation rates. Impurity-free collisional suppression of the RE population is investigated by stepping the late-time main-ion density, until RE decay is observed. The transition from growth to decay is found to occur 3–5 times above the theoretical critical electric field for avalanche growth and is thus indicative of anomalous RE loss. This suggests that suppression of tokamak RE avalanches can be achieved at lower density than previously expected, though extrapolation requires predictive understanding of the RE loss mechanism and magnitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Sheet resistance under Ohmic contacts to AlGaN/GaN heterostructures

For the determination of specific contact resistance in semiconductor devices, it is usually assumed that the sheet resistance under the contact is identical to that between the contacts. This generally does not hold for contacts to AlGaN/GaN structures, where an effective doping under the contact is thought to come from reactions between the contact metals and the AlGaN/GaN. As a consequence, conventional extraction of the specific contact resistance and transfer length leads to erroneous results. In this Letter, the sheet resistance under gold-free Ti/Al-based Ohmic contacts to AlGaN/GaN heterostructures on Si substrates has been investigated by means of electrical measurements, transmission electron microscopy, and technology computer-aided design simulations. It was found to be significantly lower than that outside of the contact area; temperature-dependent electrical characterization showed that it exhibits semiconductor-like behavior. The increase in conduction is attributed to n-type activity of nitrogen vacancies in the AlGaN. They are thought to form during rapid thermal annealing of the metal stack when Ti extracts nitrogen from the underlying semiconductor. The high n-type doping in the region between the metal and the 2-dimensional electron gas pulls the conduction band towards the Fermi level and enhances horizontal electron transport in the AlGaN. Using this improved understanding of the properties of the material underneath the contact, accurate values of transfer length and specific contact resistance have been extracted.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Guided ion beam and theoretical study of the reactions of Au{sup +} with H{sub 2}, D{sub 2}, and HD

Reactions of the late third-row transition metal cation Au{sup +} with H{sub 2}, D{sub 2}, and HD are examined using guided ion beam tandem mass spectrometry. A flow tube ion source produces Au{sup +} in its {sup 1}S (5d{sup 10}) electronic ground state level. Corresponding state-specific reaction cross sections for forming AuH{sup +} and AuD{sup +} as a function of kinetic energy are obtained and analyzed to give a 0 K bond dissociation energy of D{sub 0}(Au{sup +}-H) = 2.13 {+-} 0.11 eV. Quantum chemical calculations at the B3LYP/HW+/6-311+G(3p) and B3LYP/Def2TZVPP levels performed here show good agreement with the experimental bond energy. Theory also provides the electronic structures of these species and the reactive potential energy surfaces. We also compare this third-row transition metal system with previous results for analogous reactions of the first-row and second-row congeners, Cu{sup +} and Ag{sup +}. We find that Au{sup +} has a stronger M{sup +}-H bond, which can be explained by the lanthanide contraction and relativistic effects that alter the relative size of the valence s and d orbitals. Results from reactions with HD provide insight into the reaction mechanism and indicate that ground state Au{sup +} reacts largely via a direct mechanism, in concordance with the behavior of the lighter group 11 metal ions, but includes more statistical behavior than these metals as well.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron-only reconnection and associated electron heating and acceleration in PHASMA

In this work, using incoherent Thomson scattering, electron heating and acceleration at the electron velocity distribution function (EVDF) level are investigated during electron-only reconnection in the PHAse Space MApping (PHASMA) facility. Reconnection arises during the merger of two kink-free flux ropes. Both push and pull type reconnection occur in a single discharge. Electron heating is localized around the separatrix, and the electron temperature increases continuously along the separatrix with distance from the X-line. The local measured gain in enthalpy flux is up to 70% of the incoming Poynting flux. Notably, non-Maxwellian EVDFs comprised of a warm bulk population and a cold beam are directly measured during the electron-only reconnection. The electron beam velocity is comparable to, and scales with, electron Alfvén speed, revealing the signature of electron acceleration caused by electron-only reconnection. The observation of oppositely directed electron beams on either side of the X-point provides “smoking-gun” evidence of the occurrence of electron-only reconnection in PHASMA. 2D particle-in-cell simulations agree well with the laboratory measurements. The measured conversion of Poynting flux into electron enthalpy is consistent with recent observations of electron-only reconnection in the magnetosheath [Phan et al., Nature 557, 202 (2018)] at similar dimensionless parameters as in the experiments. The laboratory measurements go beyond the magnetosheath observations by directly resolving the electron temperature gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Energy spectrum of charge carriers in Ag{sub 2}Te

Conductivity {sigma}(T) and Hall constant R(B, T) are studied for Ag{sub 2}Te with excess 0.1% of Te. The change in the R sign from (-) to (+) is found in dependences R(B) at various temperatures. In the temperature dependences of R in a range of 1-3 kG, two extrema are found, namely, minimum at T {approx} 60 and maximum at T {approx} 80 K, and at B {>=} 5 kG, the double change in sign of R from (-) to (+) and from (+) to (-) is found. Temperatures of sign inversion for R depend on the magnetic field. At B = 15 kG, the sign of R varies from (-) to (+) at T {approx} 38 K, and from (+) to (-) at T {approx} 70 K. It is found approximately in the region of the change in the sign of R(T), the concentration n(T) and electrical conductivity pass through the minimum. It is established that the minima of n(T) and {sigma}(T), extrema in R(T), and sign inversion for R(T) from (-) to (+) as well as the overestimated temperature dependence n{infinity}T{sup 4} are caused by localization of conduction electrons at acceptor levels entering the conduction band of Ag{sub 2}Te. The values of parameters of electrons (n, {mu}{sub n}) and holes (p, {mu}{sub p}) at the points of the change in the sign of R(T) from (-) to (+) and from (+) to (-) are determined.

36 MATERIALS SCIENCE↗

Simulation of relaxation times and energy spectra of the CdTe/Hg{sub 1-x}Cd{sub x}Te/CdTe quantum well for variable valence band offset, well width, and composition x

The dependences of relaxation times and energy spectrum of the CdTe/Hg{sub 1-x}Cd{sub x}Te/CdTe quantum well (QW) on its parameters were simulated in the cadmium molar fraction range 0 < x < 0.16. It was found that the x increase from 0 to 0.16 changes electron wave function localization in the QW. A criterion for determining the number of interface levels of localized electrons depending on QW parameters was obtained. The effect of a sharp (by two orders of magnitude) increase in the relaxation time of localized electrons was detected at small QW widths and x close to 0.16.

36 MATERIALS SCIENCE↗