Search NASA⌕ Search

SEARCH · Search NASA

Results for “finite difference”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Comparison of generalized Reynolds and Navier Stokes equations for flow of a power law fluid

This paper compares a finite element solution of a modified Reynolds equation with a finite difference solution of the Navier-Stokes equation for a power law fluid. Both the finite element and finite difference formulation are reviewed. Solutions to spiral flow in parallel and conical geometries are compared. Comparison with experimental results are also given. The effects of the assumptions used in the Reynolds equation are discussed.

Mullen, R. L.↗

Thermal analysis of a hypersonic wing test structure

The three-dimensional finite element modeling techniques developed for the thermal analysis of a hypersonic wing test structure (HWTS) are described. The computed results are compared to measured test data. In addition, the results of a NASA two-dimensional parameter finite difference local thermal model and the results of a contractor two-dimensional lumped parameter finite difference local thermal model will be presented.

Sandlin, Doral R.↗

Optimization Based Efficiencies in First Order Reliability Analysis

This paper develops a method for updating the gradient vector of the limit state function in reliability analysis using Broyden's rank one updating technique. In problems that use commercial code as a black box, the gradient calculations are usually done using a finite difference approach, which becomes very expensive for large system models. The proposed method replaces the finite difference gradient calculations in a standard first order reliability method (FORM) with Broyden's Quasi-Newton technique. The resulting algorithm of Broyden updates within a FORM framework (BFORM) is used to run several example problems, and the results compared to standard FORM results. It is found that BFORM typically requires fewer functional evaluations that FORM to converge to the same answer.

Peck, Jeffrey A.↗

Multi-temperature representation of electron velocity distribution functions. I. Fits to numerical results

Electron energy distribution functions are expressed as a sum of 6-12 Maxwellians or a sum of 3, but each multiplied by a finite series of generalized Laguerre polynomials. We fitted several distribution functions obtained from the finite difference Fokker-Planck code 'FPI'[Matte and Virmont, Phys. Rev. Lett. 49, 1936 (1982)] to these forms, by matching the moments, and showed that they can represent very well the coexistence of hot and cold populations, with a temperature ratio as high as 1000. This was performed for two types of problems: (1) the collisional relaxation of a minority hot component in a uniform plasma and (2) electron heat flow down steep temperature gradients, from a hot to a much colder plasma. We find that the multi-Maxwellian representation is particularly good if we accept complex temperatures and coefficients, and it is always better than the representation with generalized Laguerre polynomials for an equal number of moments. For the electron heat flow problem, the method was modified to also fit the first order anisotropy f{sub 1}(x,v,t), again with excellent results. We conclude that this multi-Maxwellian representation can provide a viable alternative to the finite difference speed or energy grid in kinetic codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Degrees of rate control and AutoDiff-driven direct sensitivity analysis in heterogeneous catalysis

Despite the wide application and benefits of the degree of rate control (DRC) analysis, several details remain argued, particularly about the conservation of DRCs at transient (TR) and steady-state (SS) conditions, especially for complex reaction networks. This work argues that previous proofs about the conservation properties of DRCs have been incomplete, and we provide new mathematical proofs at TR and SS conditions. In addition, we use both analytical (automatic differentiation) and numerical (finite difference) approaches to compute DRCs for the case study of ethane hydrogenolysis (EH) over Pt(111). This work confirms that at both TR and SS conditions, the sum of all DRCs, i.e., sum of the degrees of kinetic (DKRC) and thermodynamic rate control (DTRC), is conserved at zero. At SS conditions, the sum of DKRC is conserved at 1 while the sum of DTRC is conserved at −1. In corroboration of previous works, we show that the DTRC for any adsorbate at SS is equal to the product of the species coverage and a constant. In contrast, at TR conditions, the individual sums of both DTRC and DKRC are not conserved and can be any real number, with potential implications for the novel field of dynamic catalysis. Finally, we show that the conventional finite difference (FD) approach, only useful at SS, is prone to inaccuracy and very sensitive to the value of the differential change applied. The optimal differential value also varies significantly with system and rate definition. Consequently, we describe and illustrate in this work the application of the automatic differentiation (AD) approach for the more accurate determination of DRCs at both TR and SS conditions.

Automatic differentiation↗

Epitaxial growth of three dimensionally structured III-V photonic crystal via hydride vapor phase epitaxy

Three-dimensional (3D) photonic crystals are one class of materials where epitaxy, and the resultant attractive electronic properties, would enable new functionalities for optoelectronic devices. Here we utilize self-assembled colloidal templates to fabricate epitaxially grown single crystal 3D mesostructured Ga{sub x}In{sub 1−x}P (GaInP) semiconductor photonic crystals using hydride vapor phase epitaxy (HVPE). The epitaxial relationship between the 3D GaInP and the substrate is preserved during the growth through the complex geometry of the template as confirmed by X-ray diffraction (XRD) and high resolution transmission electron microscopy. XRD reciprocal space mapping of the 3D epitaxial layer further demonstrates the film to be nearly fully relaxed with a negligible strain gradient. Fourier transform infrared spectroscopy reflection measurement indicates the optical properties of the photonic crystal which agree with finite difference time domain simulations. This work extends the scope of the very few known methods for the fabrication of epitaxial III-V 3D mesostructured materials to the well-developed HVPE technique.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Transient Response Dynamic Module Modifications to Include Static and Kinetic Friction Effects

A methodology that supports forced transient response dynamic solutions when both static and kinetic friction effects are included in a structural system model is described. Modifications that support this type of nonlinear transient response solution are summarized for the transient response dynamics (TRD) NASTRAN module. An overview of specific modifications for the NASTRAN processing subroutines, INITL, TRD1C, and TRD1D, are described with further details regarding inspection of nonlinear input definitions to define the type of nonlinear solution required, along with additional initialization requirements and specific calculation subroutines to successfully solve the transient response problem. The extension of the basic NASTRAN nonlinear methodology is presented through several stages of development to the point where constraint equations and residual flexibility effects are introduced into the finite difference Newmark-Beta recurrsion formulas. Particular emphasis is placed on cost effective solutions for large finite element models such as the Space Shuttle with friction degrees of freedom between the orbiter and payloads mounted in the cargo bay. An alteration to the dynamic finite difference equations of motion is discussed, which allows one to include friction effects at reasonable cost for large structural systems such as the Space Shuttle. Data are presented to indicate the possible impact of transient friction loads to the payload designer for the Space Shuttle. Transient response solution data are also included, which compare solutions without friction forces and those with friction forces for payloads mounted in the Space Shuttle cargo bay. These data indicate that payload components can be sensitive to friction induced loads.

Misel, J. E.↗

Lectures series in computational fluid dynamics

The lecture notes cover the basic principles of computational fluid dynamics (CFD). They are oriented more toward practical applications than theory, and are intended to serve as a unified source for basic material in the CFD field as well as an introduction to more specialized topics in artificial viscosity and boundary conditions. Each chapter in the test is associated with a videotaped lecture. The basic properties of conservation laws, wave equations, and shock waves are described. The duality of the conservation law and wave representations is investigated, and shock waves are examined in some detail. Finite difference techniques are introduced for the solution of wave equations and conservation laws. Stability analysis for finite difference approximations are presented. A consistent description of artificial viscosity methods are provided. Finally, the problem of nonreflecting boundary conditions are treated.

Thompson, Kevin W.↗

Numerical investigation of laminar-turbulent transition in a flat plate wake

Lamina-turbulent transition of high-deficit flat plate wakes is investigated by direct numerical simulations using the complete Navier Stokes equations. The simulations are based on a spatial model so that both the base flow and the disturbance flow can develop in the downstream direction. The Navier Stokes equations are used in a vorticity-velocity form and are solved using a combination of finite difference and spectral approximations. Fourier series are used in the spanwise direction. Second-order finite-differences are used to approximate the spatial derivatives in the streamwise and transverse directions. For the temporal discretion, a combination of ADI, Crank-Nicolson, and Adams-Bashforth methods is employed. The discretized velocity equations are solved using fast Helmholtz solvers. Code validation is accomplished by comparison of the numerical results to both linear stability and to experiments. Calculations of two- and/or three-dimensional sinuous and mode disturbances in the wake of flat plate are undertaken. For calculations of two-dimensional disturbances, the wake is forced at an amplitude level so that nonlinear disturbance development may be observed. In addition, the forcing amplitude is varied in order to determine its effect on the disturbance behavior. To investigate the onset of three-dimensionality, the wake is forced with a small-amplitude three-dimensional disturbance and a larger amplitude two-dimensional disturbance. The two-dimensional forcing amplitude is varied in order to determine its influence on the three-dimensional flow field.

Fasel, Hermann F.↗

Effects of spatial order of accuracy on the computation of vortical flowfields

The effect of the order-of-accuracy, used for the spatial discretization, on the resolution of the leading edge vortices over sharp-edged delta wings is investigated. The flowfield is computed using a viscous/inviscid zonal approach. The viscous flow in the vicinity of the wing is computed using the conservative formulation of the compressible, thin-layer Navier-Stokes equations. The leeward-side vortical flowfield and the other flow regions away from the surface are computed as inviscid. The time integration is performed with both an explicit fourth-order Runge-Kutta scheme and an implicit, factorized, iterative scheme. High-order-accurate inviscid fluxes are computed using both a conservative and a non-conservative (primitive variable) formulation. The nonlinear, inviscid terms of the primitive variable form of the governing equations are evaluated with a finite-difference numerical scheme based on the sign of the eigenvalues. High-order, upwind-biased, finite difference formulas are used to evaluate the derivatives of the nonlinear convective terms. Computed results are compared with available experimental data, and comparisons of the flowfield in the vicinity of the vortex cores are presented.

Ekaterinaris, J. A.↗

Sensitivity Analysis for Coupled Aero-structural Systems

A novel method has been developed for calculating gradients of aerodynamic force and moment coefficients for an aeroelastic aircraft model. This method uses the Global Sensitivity Equations (GSE) to account for the aero-structural coupling, and a reduced-order modal analysis approach to condense the coupling bandwidth between the aerodynamic and structural models. Parallel computing is applied to reduce the computational expense of the numerous high fidelity aerodynamic analyses needed for the coupled aero-structural system. Good agreement is obtained between aerodynamic force and moment gradients computed with the GSE/modal analysis approach and the same quantities computed using brute-force, computationally expensive, finite difference approximations. A comparison between the computational expense of the GSE/modal analysis method and a pure finite difference approach is presented. These results show that the GSE/modal analysis approach is the more computationally efficient technique if sensitivity analysis is to be performed for two or more aircraft design parameters.

Giunta, Anthony A.↗

Theoretically informed Monte Carlo simulation of liquid crystals by sampling of alignment-tensor fields

A theoretically informed coarse-grained Monte Carlo method is proposed for studying liquid crystals. The free energy functional of the system is described in the framework of the Landau-de Gennes formalism. The alignment field and its gradients are approximated by finite differences, and the free energy is minimized through a stochastic sampling technique. The validity of the proposed method is established by comparing the results of the proposed approach to those of traditional free energy minimization techniques. Its usefulness is illustrated in the context of three systems, namely, a nematic liquid crystal confined in a slit channel, a nematic liquid crystal droplet, and a chiral liquid crystal in the bulk. It is found that for systems that exhibit multiple metastable morphologies, the proposed Monte Carlo method is generally able to identify lower free energy states that are often missed by traditional approaches. Importantly, the Monte Carlo method identifies such states from random initial configurations, thereby obviating the need for educated initial guesses that can be difficult to formulate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vlasov simulations of electron-ion collision effects on damping of electron plasma waves

Collisional effects can play an essential role in the dynamics of plasma waves by setting a minimum damping rate and by interfering with wave-particle resonances. Kinetic simulations of the effects of electron-ion pitch angle scattering on Electron Plasma Waves (EPWs) are presented here. In particular, the effects of such collisions on the frequency and damping of small-amplitude EPWs for a range of collision rates and wave phase velocities are computed and compared with theory. Both the Vlasov simulations and linear kinetic theory find the direct contribution of electron-ion collisions to wave damping significantly reduced from that obtained through linearized fluid theory. To our knowledge, this simple result has not been published before. Simulations have been carried out using a grid-based (Vlasov) approach, based on a high-order conservative finite difference method for discretizing the Fokker-Planck equation describing the evolution of the electron distribution function. Details of the implementation of the collision operator within this framework are presented. Such a grid-based approach, which is not subject to numerical noise, is of particular interest for the accurate measurements of the wave damping rates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gasdynamics of the cryogenic cooler of the Nimbus F spacecraft

This paper presents a theoretical study of the gasdynamic behavior of the system used to vent methane gas from an open-cycle cryogenic cooler carried on the Nimbus F satellite. The flow of this gas from the cryogen tank to the vent-line exit takes place at very low Reynolds number, and is strongly affected by variations in the tube cross-sectional area, substantial heat addition, and important frictional effects. All three of these factors play a role in determining the choking mass flow. Finite-difference calculations are used to establish the mass flow rates for a range of cryogen temperatures. Finite-difference calculations are also used to determine the flowfield in the plume that results when the vented gas exits from the spacecraft. The momentum-flux distributions within the plume are then used to estimate the torques applied to the spacecraft when the plume impinges on several surfaces near the exit point. These torque estimates compare favorably with flight data.

Rae, W. J.↗

Method for calculating convective heat-transfer coefficients over turbine vane surfaces

A method for calculating laminar, transitional, and turbulent convective heat-transfer coefficients for turbine vane surfaces is described. An approximate integral solution method produced results in good agreement with a finite-difference solution. Comparisons between the two are presented. The integral solution results agreed well with the finite-difference solution results in the laminar and turbulent regions. Differences in calculating the start of transition produced a later starting point for the approximate integral solution's transitional flow regime.

Gauntner, D. J.↗

Identification of differences between finite element analysis and experimental vibration data

An important problem that has emerged from combined analytical/experimental investigations is the task of identifying and quantifying the differences between results predicted by F.E. analysis and results obtained from experiment. The objective of this study is to extend and evaluate the procedure developed by Sidhu for correlation of linear F.E. and modal test data to include structures with viscous damping. The desirability of developing this procedure is that the differences are identified in terms of physical mass, damping, and stiffness parameters instead of in terms of frequencies and modes shapes. Since the differences are computed in terms of physical parameters, locations of modeling problems can be directly identified in the F.E. model. From simulated data it was determined that the accuracy of the computed differences increases as the number of experimentally measured modes included in the calculations is increased. When the number of experimental modes is at least equal to the number of translational degrees of freedom in the F.E. model both the location and magnitude of the differences can be computed very accurately. When the number of modes is less than this amount the location of the differences may be determined even though their magnitudes will be under estimated.

Lawrence, C.↗

Identification of differences between finite element analysis and experimental vibration data

An important problem that has emerged from combined analytical/experimental investigations is the task of identifying and quantifying the differences between results predicted by F.E. analysis and results obtained from experiment. The objective of this study is to extend and evaluate the procedure developed by Sidhu for correlation of linear F.E. and modal test data to include structures with viscous damping. The desirability of developing this procedure is that the differences are identified in terms of physical mass, damping, and stiffness parameters instead of in terms of frequencies and modes shapes. Since the differences are computed in terms of physical parameters, locations of modeling problems can be directly identified in the F.E. model. From simulated data it was determined that the accuracy of the computed differences increases as the number of experimentally measured modes included in the calculations is increased. When the number of experimental modes is at least equal to the number of translational degrees of freedom in the F.E. model both the location and magnitude of the differences can be computed very accurately. When the number of modes is less than this amount the location of the differences may be determined even though their magnitudes will be underestimated.

Lawrence, Charles↗

Computation of turbulent flows using an extended k-epsilon turbulence closure model

An extended kappa-epsilon turbulence model is proposed and tested with successful results. An improved transport equation for the rate of dissipation of the turbulent kinetic energy, epsilon, is proposed. The proposed model gives more effective response to the energy production rate than does the standard kappa-epsilon turbulence model. An extra time scale of the production range is included in the dissipation rate equation. This enables the present model to perform equally well for several turbulent flows with different characteristics, e.g., plane and axisymmetric jets, turbulent boundary layer flow, turbulent flow over a backward-facing step, and a confined turbulent swirling flow. A second-order accurate finite difference boundary layer code and a nearly second-order accurate finite difference elliptic flow solver are used for the present numerical computations.

Chen, Y.-S.↗