Search NASA⌕ Search

SEARCH · Search NASA

Results for “intermediates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Characterization of Low Level and Intermediate Nuclear Waste: improvements in calorimetric measurement combined radiological modelling - 16144

Since 40 years, calorimetry allows to determine precisely amounts of nuclear material within a container. Combined with gamma spectrometry, calorimetric measurements give plutonium contents with a low level of uncertainty for each isotope. Calorimetry is used in a lot of nuclear facilities all around the world for plutonium or tritium inventories. It is one of the best solutions to estimate the overall quantity of nuclear material on a wide range of mass, from a few milligrams up to kilograms of radionuclides. In the case of drums containing nuclear waste, characterization was very challenging due to complex matrix, volume and low level activities. The measurement time was a real problem with large volume container and organic matrix with high air content. New designs of SETARAM calorimeters allow to measure nuclear material contents in very large container (up to 385 liters) and/or with a very low detection limit (10 μWatt). These new concepts are based on single measurement cell and vacuum chamber for low level uncertainties. The acquisition system and electronic temperature regulation are highly improved to increase the detection limit, accuracy and precision of the measurement. These modern technological developments within the calorimetry field give the promise of faster measurement times and precise measurements. These devices can be used in waste management of nuclear facilities with a better accuracy and lower uncertainties than others techniques. It is a non-destructive and non-intrusive method. There is no matrix effect which can bias the results. Waste can also be in solid, liquid or gas phase. The new calorimeters are able to give amounts of plutonium, tritium or others alpha or beta emitter radionuclides and allow determining the classification of waste (low level or intermediate). A measurement approach combining very large volume calorimeter, gamma spectrometry and radiological modelling will be presented as an integrated automatic waste characterization system. This system with a calculation step is taking into account the gamma emitters contribution on the total thermal power measured within the calorimeter. The aim of the system is to give a precise quantification of the radionuclides in the waste container with a precise value of the total uncertainties. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Solutions for Disposal of Intermediate Level Waste in the UK - 16693

GNS mbH is a competence centre owned by of the German utilities and tasked with the management of spent fuel and nuclear waste of all activity levels arising from operation and decommissioning of the commercial German nuclear power plants. Waste management products and methods developed by GNS over the past decades are at present the standard solutions for their respective tasks in Germany. While regulatory environments in the nuclear industry vary strongly from country to country thus limiting the one-to-one portability of such established solutions, GNS has managed to offer its services abroad, with continuously growing success. Challenges and first results of GNS' activities in the UK are the subject of this paper. Content: GNS in Germany and UK; Ion Exchange Resin at Sizewell-B; Drying of wet Intermediate Level Waste at Bradwell NPP; Lessons Learnt in the UK; New Technology Optimised for UK waste.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Overview of Kinectrics' Experience in Characterization of Low and Intermediate Level Waste (L and ILW) - 19144

Kinectrics has over two decades of experience in physico-chemical and radiological characterization of L and ILW generated from the operation and refurbishment of nuclear reactors owned by Ontario Power Generation (OPG). This characterization is required to develop an inventory and also to support the safety case, as well as licensing, of OPG's waste management facilities including its planned Deep Geological Repository (DGR) for Low and Intermediate Level Waste (L and ILW). The typical waste matrices characterized include reactor artefacts, non-processable, compactable, incinerable, ash, assorted resin, filters, and sludge. The objective of this paper is to present an overview of the characterization work undertaken over the years and further elaborate on some recent activities pertaining to characterization of a select subset of L and ILW streams such as pressure tubes, feeder pipes, bulk non-processable and active liquid waste. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Site Selection Criteria for Deep Borehole Disposal of Intermediate Level Waste in Australia - 19615

Disposal of long-lived intermediate-level waste (ILW) and long-lived spent sealed sources (SSS) requires a high degree of containment and isolation deep underground. Disposal in medium-depth (several hundreds of metres) boreholes in suitable hard rock formations can provide adequate isolation and containment for safe and cost-effective disposal of relatively small volumes of ILW and SSS. In this paper we outline recommended site selection criteria for the purpose of (i) identifying regions that would be excluded from further consideration, and subsequently for the non-excluded regions, (ii) to identify sub-regions that could be developed into a deep borehole disposal site. The CSIRO approach builds on siting guidelines previously developed by the Sandia National Laboratory which have been revised to suit the Australian context. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

OPTIMUS{sup TM} Packaging for Intermediate Level Wastes and Spent Fuel - 20129

NAC's OPTIMUS{sup TM} packaging is a family of Type B(U)F transportation packages designed for maximum flexibility and cost-efficiency to support shipment of a wide range of challenging wastes and materials. They are small, modular packaging designs meeting DOT weight limits for road transport. OPTIMUS{sup TM} contents include low level waste, mixed low-level waste, irradiated fuel waste and intermediate level waste. Contents can also include aerosol cans with compressed gas and liquefied gas propellants and standard DOT 3E lecture bottles for shipment to treatment facilities. OPTIMUS{sup TM} packaging provides a cost-effective solution for challenging and unique waste contents combined with design simplicity and operational flexibility meeting the requirements of both SSR-6 and 10 CFR 71 for Type B(U)F packaging. The modular design of the packaging components combined with the flexibility to add modified internals for enhanced packaging performance makes OPTIMUS{sup TM} the preferred solution for many radioactive material transportation needs. The OPTIMUS{sup TM} product line currently includes two packaging designs; OPTIMUS{sup TM}-L and OPTIMUS{sup TM}-H. OPTIMUS{sup TM}-L is a lightweight transportation packaging intended for low-activity wastes, whereas OPTIMUS{sup TM}-H is a larger, heavier package intended for high-activities wastes. Due to its small size and weight, six (6) to ten (10) OPTIMUS{sup TM}-L packages can be accommodated on a single legal-weight truck shipment, depending on the weight of the contents. For typical payloads, two (2) OPTIMUS{sup TM}-H packages can be accommodated on a single legal-weight truck shipment. The OPTIMUS{sup TM} packaging share the same cask containment vessel (CCV) in the OPTIMUS{sup TM}-H and OPTIMUS{sup TM}-L. The large cavity size of the CCV, which can accommodate a 416-liter (110-gallon) drum, combined with the small size, low weight and modularity of the OPTIMUS{sup TM} packaging provides unmatched flexibility. In this paper, NAC provides a technical overview of the OPTIMUS{sup TM} packaging and identifies the design features and technology advancements making the OPTIMUS{sup TM} a readily adaptable and flexible solution for packaging processing facilities, reactor and decommissioning wastes. Optimized shielding performance through the addition of internal shielding components and alternative shipping configurations are discussed. In addition, an overview of the first major deployment of the OPTIMUS{sup TM} packaging for the Whiteshell Laboratories Closure Project (WLCP) is discussed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Methodology for defining intermediate level waste package characteristics that ensure criticality safety in a geological disposal facility - 14599

Radioactive Waste Management (RWM) is responsible for implementing geological disposal of the UK's higher activity radioactive wastes. These wastes include fissile nuclides and, therefore, demonstration of the criticality safety of the wastes under disposal conditions forms an important component of RWM's disposal system safety case. The basis for ensuring criticality safety of intermediate level waste (ILW) packages is to specify controls on the fissile material content of individual packages through the application of deterministic criticality safety assessments (CSAs). The approach is defined and controlled through RWM's Disposability Assessment process, which aims to ensure that: criticality is prevented during waste package transport to a GDF; the risk of criticality is tolerable and as low as reasonably practicable (ALARP) during GDF operations; and the likelihood and consequences of criticality arising from the evolution of waste packages after GDF closure are low. The most restrictive phase determines the package fissile material limit and, until now, in many cases the GDF post-closure phase has provided the most restrictive limit. Currently, the GDF post-closure limits are derived deterministically using highly stylised and conservative assumptions about fissile material accumulations occurring on very long timescales into the future. RWM, waste producers and regulators do not currently consider this approach to be yielding an appropriate balance of risk. Therefore, RWM is modifying the process for setting fissile material limits on ILW packages by making use of the outcomes of its recent research projects to establish the likelihood of post-closure criticality in a GDF and the consequences of hypothetical post-closure criticality events (presented in companion papers). This paper presents the revised methodology, which is based on the requirement that criticality in a GDF can be demonstrated to be of low and tolerable consequences with regard the performance of a GDF. A probabilistic 'low-likelihood package envelope' is proposed that establishes the packaging and disposal facility conditions under which post-closure criticality is considered to be of low likelihood and low consequence. The bounding conditions for establishing the extent of the package envelope have been evaluated through application of the methodologies and models developed in RWM's Likelihood of Criticality research project. It is expected that the vast majority of ILW packages would meet the package envelope requirements. The methodology also allows the use of other options, such as deterministic CSAs, for waste packages that fall outside the low-likelihood package envelope. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Comparison of Subantarctic Mode Water and Antarctic Intermediate Water formation rates in the South Pacific between NCAR-CCSM4 and observations

Average formation rates for Subantarctic Mode (SAMW) and Antarctic Intermediate Waters (AAIW) in the South Pacific are calculated from the National Center for Atmospheric Research Community Climate System Model version 4 (NCAR-CCSM4), using chlorofluorocarbon inventories. CFC-12 inventories and formation rates are compared to ocean observations. CCSM4 accurately simulates the southeast Pacific as the main formation region for SAMW and AAIW. CCSM4 formation rates for SAMW are 3.4 Sv, about half of the observational rate. Shallow mixed layers and a thinner SAMW in CCSM4 are responsible for lower formation rates. A formation rate of 8.1 Sv for AAIW in CCSM4 is higher than observations. Higher inventories in CCSM4 in the southwest and central Pacific, and higher surface concentrations are the main reasons for higher formation rates of AAIW. This comparison of model and observations is useful for understanding the uptake and transport of other gases, e.g., CO2 by the model.

antarctic↗

Intermediate frequency atmospheric disturbances: A dynamical bridge connecting western U.S. extreme precipitation with East Asian cold surges: Atmospheric Rivers and IF disturbances

In this study, an atmospheric river (AR) detection algorithm is developed to investigate the downstream modulation of the eastern North Pacific ARs by another weather extreme, known as the East Asian cold surge (EACS), in both reanalysis data and high-resolution global model simulations. It is shown that following the peak of an EACS, atmospheric disturbances of intermediate frequency (IF; 10–30 day period) are excited downstream. This leads to the formation of a persistent cyclonic circulation anomaly over the eastern North Pacific that dramatically enhances the AR occurrence probability and the surface precipitation over the western U.S. between 30°N and 50°N. A diagnosis of the local geopotential height tendency further confirms the essential role of IF disturbances in establishing the observed persistent anomaly. This downstream modulation effect is then examined in the two simulations of the National Center for Atmospheric Research Community Climate System Model version 4 with different horizontal resolutions (T85 and T341) for the same period (1979–2005). The connection between EACS and AR is much better captured by the T341 version of the model, mainly due to a better representation of the scale interaction and the characteristics of IF atmospheric disturbances in the higher-resolution model. The findings here suggest that faithful representations of scale interaction in a global model are critical for modeling and predicting the occurrences of hydrological extremes in the western U.S. and for understanding their potential future changes.

54 ENVIRONMENTAL SCIENCES↗

Investigation of representing hysteresis in macroscopic models of two-phase flow in porous media using intermediate scale experimental data

Incorporating hysteresis into models is important to accurately capture the two phase flow behavior when porous media systems undergo cycles of drainage and imbibition such as in the cases of injection and post-injection redistribution of CO 2 during geological CO 2 storage (GCS). In the traditional model of two-phase flow, existing constitutive models that parameterize the hysteresis associated with these processes are generally based on the empirical relationships. This manuscript presents development and testing of mathematical hysteretic capillary pressure—saturation—relative permeability models with the objective of more accurately representing the redistribution of the fluids after injection. The constitutive models are developed by relating macroscopic variables to basic physics of two-phase capillary displacements at pore-scale and void space distribution properties. The modeling approach with the developed constitutive models with and without hysteresis as input is tested against some intermediate-scale flow cell experiments to test the ability of the models to represent movement and capillary trapping of immiscible fluids under macroscopically homogeneous and heterogeneous conditions. The hysteretic two-phase flow model predicted the overall plume migration and distribution during and post injection reasonably well and represented the postinjection behavior of the plume more accurately than the nonhysteretic models. In conclusion, based on the results in this study, neglecting hysteresis in the constitutive models of the traditional two-phase flow theory can seriously overpredict or underpredict the injected fluid distribution during post-injection under both homogeneous and heterogeneous conditions, depending on the selected value of the residual saturation in the nonhysteretic models.

58 GEOSCIENCES↗

Intermediate-Scale Experimental Study to Improve Fundamental Understanding of Attenuation Capacity for Leaking CO 2 in Heterogeneous Shallow Aquifers

In order to assess the risks of Geologic Carbon Sequestration (GCS), it is crucial to understand the fundamental physicochemical processes that may occur if and when stored CO 2 leaks upward from a deep storage reservoir into the shallow subsurface. Intermediate-scale experiments allow for improved understanding of the multiphase evolution processes that control CO 2 migration behaviour in the subsurface, because the boundary conditions, initial conditions, and porous media parameters can be better controlled and monitored in the laboratory than in field settings. For this study, a large experimental test bed was designed to mimic a cross-section of a shallow aquifer with layered geologic heterogeneity. As water with aqueous CO 2 was injected into the system to mimic a CO 2 -charged water leakage scenario, the spatiotemporal evolution of the multiphase CO 2 plume was monitored. Similar experiments were performed with two different sand combinations to assess the relative effects of different types of geologic facies transitions on the CO 2 evolution processes. Significant CO 2 attenuation was observed in both scenarios, but by fundamentally different mechanisms. When the porous media layers had very different permeabilities, attenuation was caused by local accumulation (structural trapping) and slow re-dissolution of gas phase CO 2 . When the permeability difference between the layers was relatively small, on the other hand, gas phase continually evolved over widespread areas near the leading edge of the aqueous plume, which also attenuated CO 2 migration. In conclusion, this improved process understanding will aid in the development of models that could be used for effective risk assessment and monitoring programs for GCS projects.

54 ENVIRONMENTAL SCIENCES↗

Coherent Response of Antarctic Intermediate Water and Atlantic Meridional Overturning Circulation During the Last Deglaciation: Reconciling Contrasting Neodymium Isotope Reconstructions From the Tropical Atlantic

Here, the Antarctic Intermediate Water (AAIW) plays important roles in the global climate system and the global ocean nutrient and carbon cycles. However, it is unclear how AAIW responds to global climate changes. In particular, neodymium isotopic composition (ε Nd ) reconstructions from different locations from the tropical Atlantic have led to a debate on the relationship between northward penetration of AAIW into the tropical Atlantic and the Atlantic meridional overturning circulation (AMOC) variability during the last deglaciation. We resolve this controversy by studying the transient oceanic evolution during the last deglaciation using a neodymium–enabled ocean model. Our results suggest a coherent response of AAIW and AMOC: when AMOC weakens, the northward penetration and transport of AAIW decrease while its depth and thickness increase. Our study highlights that as part of the return flow of the North Atlantic Deep Water, the northward penetration of AAIW in the Atlantic is determined predominately by AMOC intensity. Moreover, the inconsistency among different tropical Atlantic ε Nd reconstructions is reconciled by considering their corresponding core locations and depths, which were influenced by different water masses in the past. The very radiogenic water from the bottom of the Gulf of Mexico and the Caribbean Sea, which was previously overlooked in the interpretations of deglacial ε Nd variability, can be transported to shallow layers during active AMOC and modulates ε Nd in the tropical Atlantic. Changes in the AAIW core depth must also be considered. Thus, interpretation of ε Nd reconstructions from the tropical Atlantic is more complicated than suggested in previous studies.

54 ENVIRONMENTAL SCIENCES↗

Molecular Level Understanding of the Interactions Between Reaction Intermediates of Li–S Energy Storage Systems and Ether Solvents

The lithium–sulfur energy storage system has the potential to deliver high energy density for grid and transportation applications. Lithium polysulfides (LiPS) formed during the chemical transformation of elemental sulfur can be reactive toward commonly used ether solvents. In this chapter, using density functional theory calculations, we address kinetic and thermodynamic feasibilities of LiPS reactions with various ether molecules (linear and cyclic) and fluorine-substituted ether molecules to understand their long-term chemical stability as solvents or cosolvents. These a priori computations indicate that the most reactive intermediates that initiate a likely degradation reaction of ether solvent molecules are Li2S2, Li2S3, Li2S4, and S2 2−. The lowest computed activation barriers (ΔH ‡) for the CO bond cleavage of dimethoxy ethane (DME) by shorter chain polysulfides or sulfide anions are in the range of ∼27–35 kcal mol−1, suggesting extremely slow kinetics for a polysulfide-induced ether solvent degradation. Calculations are extended to nine more linear and cyclic ether solvent molecules including the glymes, tetrahydrofuran (THF), and dioxolane (DOL). Computations suggest that the solvent stability is higher for shorter chain linear ethers compared to longer chain linear ethers and cyclic ethers. In addition to the 10 ether solvent candidates, simulations were also performed to understand the kinetic stability of 16 fluorinated DME molecules – a model for fluorinated ether species. Computations show that the introduction of one or more CF bond(s) in linear ether molecules enables nucleophilic attack by the polysulfide species, especially toward the polar CF/CO bonds. The CO bond stability of the fluoroether molecule was also compromised by the presence of the highly electron-withdrawing “−F” functional group. In general, in this chapter, utilizing the predictive power of first principle simulations, the LiPS reactivity toward ether solvent molecules was simulated and likely reactions that cause degradation are discussed. These studies also provide guidelines for the design of electrolyte systems with longer term chemical stability.

Assary, Rajeev S.↗

The Origin of the Reactivity of the Criegee Intermediate: Implications for Atmospheric Particle Growth

Abstract The electronic structure of the simplest Criegee intermediate, H 2 COO, is practically that of a closed shell. On the biradical scale ( β ), where 0 corresponds to the pure closed shell and 1 to a pure biradical, its β value is only 0.10, suggesting that its ground electronic state is best described as a H 2 C=O δ+ −O δ− zwitterion. However, this picture of a nearly inert closed shell contradicts its rich reactivity in the atmosphere. It is shown that the mixing of its ground state with the first triplet excited state, which is a pure biradical state of the type H 2 C . −O−O . , is responsible for the formation of strongly bound products during reactions inducing atmospheric particle growth.

Miliordos, Evangelos↗

Simplest Monodentate Imidazole Stabilization of the oxy‐Tyrosinase Cu 2 O 2 Core: Phenolate Hydroxylation through a Cu III Intermediate

Abstract Tyrosinases are ubiquitous binuclear copper enzymes that oxygenate to Cu II 2 O 2 cores bonded by three histidine Nτ‐imidazoles per Cu center. Synthetic monodentate imidazole‐bonded Cu II 2 O 2 species self‐assemble in a near quantitative manner at −125 °C, but Nπ‐ligation has been required. Herein, we disclose the syntheses and reactivity of three Nτ‐imidazole bonded Cu II 2 O 2 species at solution temperatures of −145 °C, which was achieved using a eutectic mixture of THF and 2‐MeTHF. The addition of anionic phenolates affords a Cu III 2 O 2 species, where the bonded phenolates hydroxylate to catecholates in high yields. Similar Cu III 2 O 2 intermediates are not observed using Nπ‐bonded Cu II 2 O 2 species, hinting that Nτ‐imidazole ligation, conserved in all characterized Ty, has functional advantage beyond active‐site flexibility. Substrate accessibility to the oxygenated Cu 2 O 2 core and stabilization of a high oxidation state of the copper centers are suggested from these minimalistic models.

Chiang, Linus↗

Gas‐Phase Synthesis of the Elusive Cyclooctatetraenyl Radical (C 8 H 7 ) via Triplet Aromatic Cyclooctatetraene (C 8 H 8 ) and Non‐Aromatic Cyclooctatriene (C 8 H 8 ) Intermediates

Abstract The 1,2,4,7‐cyclooctatetraenyl radical (C 8 H 7 ) has been synthesized for the very first time via the bimolecular gas‐phase reaction of ground‐state carbon atoms with 1,3,5‐cycloheptatriene (C 7 H 8 ) on the triplet surface under single‐collision conditions. The barrier‐less route to the cyclic 1,2,4,7‐cyclooctatetraenyl radical accesses exotic reaction intermediates on the triplet surface, which cannot be synthesized via classical organic chemistry methods: the triplet non‐aromatic 2,4,6‐cyclooctatriene (C 8 H 8 ) and the triplet aromatic 1,3,5,7‐cyclooctatetraene (C 8 H 8 ). Our approach provides a clean gas‐phase synthesis of this hitherto elusive cyclic radical species 1,2,4,7‐cyclooctatetraenyl via a single‐collision event and opens up a versatile, unconventional path to access this previously largely obscure class of cyclooctatetraenyl radicals, which have been impossible to access through classical synthetic methods.

Lucas, Michael↗

Modulating Electrostatic Interactions in Ion Pair Intermediates To Alter Site Selectivity in the C−O Deoxygenation of Sugars

Abstract Controlling which products one can access from the predefined biomass‐derived sugars is challenging. Changing from CH 2 Cl 2 to the greener alternative toluene alters which C−O bonds in a sugar are cleaved by the tris(pentafluorophenyl)borane/HSiR 3 catalyst system. This increases the diversity of high‐value products that can be obtained through one‐step, high‐yielding, catalytic transformations of the mono‐, di‐, and oligosaccharides. Computational methods helped identify this non‐intuitive outcome in low dielectric solvents to non‐isotropic electrostatic enhancements in the key ion pair intermediates, which influence the reaction coordinate in the reactivity‐/selectivity‐determining step. Molecular‐level models for these effects have far‐reaching consequences in stereoselective ion pair catalysis.

Lowe, Jared M.↗

Proton- and Reductant-Assisted Dioxygen Activation by a Nonheme Iron(II) Complex to Form an Oxoiron(IV) Intermediate

With the aid of HClO{sub 4} as proton and BPh{sub 4}{sup -} as electron source, the Fe complex of a pentadentate pyridyl-appended cyclam ligands can activate dioxygen to yield the corresponding oxoiron(IV) complex (see scheme; TMC-py=1-(2'-pyridylmethyl)-4,8,11-trimethyl-1,4,8,11-tetraazacyclotetradecane; C gray, Fe magneta, N blue, O red). This transformation is proposed to occur via a hydroperoxoiron(III) intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rate Coefficients of C1 and C2 Criegee Intermediate Reactions with Formic and Acetic Acid Near the Collision Limit: Direct Kinetics Measurements and Atmospheric Implications

Rate coefficients are directly determined for the reactions of the Criegee intermediates (CI) CH2OO and CH3CHOO with the two simplest carboxylic acids, formic acid (HCOOH) and acetic acid (CH3COOH), employing two complementary techniques: multiplexed photoionization mass spectrometry and cavity-enhanced broadband ultraviolet absorption spectroscopy. The measured rate coefficients are in excess of 1 1010 cm3 s 1 , several orders of magnitude larger than those suggested from many previous alkene ozonolysis experiments and assumed in atmospheric modeling studies. These results suggest that the reaction with carboxylic acids is a substantially more important loss process for CIs than is presently assumed. Implementing these rate coefficients in global atmospheric models shows that reactions between CI and organic acids make a substantial contribution to removal of these acids in terrestrial equatorial areas and in other regions where high CI concentrations occur such as high northern latitudes, and implies that sources of acids in these areas are larger than previously recognized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗