Search NASA⌕ Search

SEARCH · Search NASA

Results for “ionic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Fabrication of Solid-State Li-S Battery Components for Electric Aviation

The development of high-energy, high-safety, and high-power batteries beyond electric automobile requirements is vital for future electric aviation applications. The transition to non-volatile solid-state electrolytes (SSE) promises many advantages over traditional flammable liquid electrolytes, and may also be an enabling technology for next generation chemistries. However, significant manufacturing challenges must be overcome before the adoption of such technology. Electrolytes developed in this study were produced as sulfide-polymer composites with densified thicknesses between 20-30 microns using several processing techniques [1]. Ionic conductivity and lithium metal compatibility for the composites were compared and shown to retain reasonable ionic conductivity with improved flexibility and scalability which identifies a critical path for the production of practical solid-state batteries. Films were produced 10-15 times thinner than comparable bulk cold pressed powder electrolytes and achieved thicknesses comparable to commercial polyolefin separators (25 micron) used in commercial liquid containing lithium-ion cells. Composite conductivities were maintained above 0.2mS/cm, which holds promise for future electric aviation applications. Processing techniques are investigated to further improve electrochemical performance.

battery↗
NASA NTRSDate not supplied

Material Compatibility Study of Coated Metals to Maintain Biocidal Silver in a Spacecraft Potable Water System

Ionic silver-based biocide is an option of strong interest for future exploration and has been baselined for several emerging spacecraft potable water systems. A challenge for the use of silver biocide remains the depletion of ionic silver on wetted materials of construction. Consequently, the design and/or selection of materials that can be used as the wetted system components need specific consideration. As part of the strategy to address this issue, a multitiered approach is being investigated that looks at combinations of conventional and non-conventional spacecraft treatment processes and materials. In this study, eleven chemically-resistant polymer coatings were applied as surface treatments onto coupons that were cut out from three types of conventional spacecraft-grade metals (Titanium Grade 2, Inconel 718, and 316L Stainless Steel). The coated metals were immersed in a static 400 parts per billion silver biocide solution at a surface-area-to-volume ratio of 2.0 cm^-1 and left to soak for predefined periods of time. The concentration of the solution in contact with the coated samples were then analyzed via inductively coupled plasma mass spectrometry, and the data used to determine the extent to which the coatings provided a barrier to silver loss. This paper summarizes the coating selection process, the configuration of the test, and the performance of each coating-metal combination as a mitigation to silver depletion. The preliminary results demonstrate that select coatings are proving effective at maintaining biocidal silver concentrations. The knowledge acquired through this investigation will be used to assess the feasibility of using these coatings as a robust strategy for maintaining biocidal silver in the water systems. Future studies are planned to assess the specific use of these coatings and to better understand the implications of utilizing this material approach in the future spacecraft potable water system designs.

coatings↗
NASA NTRS2023

Multiphysics Modeling of Electrode Dissolution under Hydrodynamic Conditions in Low Conductivity Water

Efficient plug-flow electrochemical reactors are characterized by their ability to effectively convert species with significant ionic strength and/or with the assistance of a well-behaved electrolyte. Because of the classic electroconductivity requirement, electrochemical reactors are not particularly attractive options for applications with low-conductivity conditions, especially for low-pressure feeds. However, these reactors can still find application in dedicated processes such as ultra-clean water conditioning and biological-coupled separation systems. Consequently, a multi-physics model was developed using COMSOL Multiphysics to characterize different reactor-design conditions based on the Tertiary Current Distribution which accounts for the effects of expected variations in electrolyte composition and ionic strength on the electrochemical process, as well as solution resistance and electrode kinetics. The modelling framework presented here employs single-phase laminar fluid flow, the Nernst-Planck equation, the water-based electroneutrality condition, and concentration-dependent overpotentials. This investigation particularly explores the electrolysis process of “anodic dissolution,” in which elemental species dissociate from the solid matrix of the electrode and enter the liquid phase of the electrolyte as soluble ions. The reactor configuration of interest has a rectangular parallel-electrode design and is operated galvanostatically. A series of parametric studies are carried out to inspect the response of the system when hydrodynamic, kinetic, and geometric conditions are changed. The parametric sweep resulted in variable effluent concentrations and system voltage, which reveal underlaying optimization patterns for electrode dissolution in low conductivity water.

Multiphysics↗
DOE OSTI2024

Thermally stable hydrocarbon-based anion exchange membrane and ionomers

An anion exchange membrane is composed of a copolymer of 1,1-diphenylethylene and one or more styrene monomers, such as 4-tert-butylstyrene. The copolymer includes a backbone substituted with a plurality of ionic groups coupled to phenyl groups on the backbone via hydrocarbyl tethers between about 1 and about 7 carbons in length. High-temperature conditions enabled by these copolymers enhance conductivity performance, making them particularly suitable for use in anion exchange membranes in fuel cells, electrolyzers employing hydrogen, ion separations, etc. The properties of the membranes can be tuned via the degree of functionalization of the phenyl groups and selection of the functional groups, such as quaternary ammonium groups. Several processes can be used to incorporate the desired ionic functional groups into the polymers, such as chloromethylation, radical bromination, Friedel-Crafts acylation and alkylation, sulfonation followed by amination, or combinations thereof.

Lee, Sangwoo↗
DOE OSTI2025

Molecular understanding of ion transport in a zwitterionic electrolyte

Zwitterions (ZIs) are unique molecules that carry both positive and negative charges, resulting in overall charge neutrality and high dielectric constants. These distinctive properties have enabled broad applications of zwitterionic functionality, including the emerging use of ZIs in lithium-ion battery electrolytes. As a contribution to this developing field, we use all-atom molecular dynamics simulations to investigate the ion transport mechanisms in amorphous mixtures of a zwitterionic liquid containing a range of LiTFSI salt concentrations. Furthermore, the local coordination environment around the Li + ions plays a strong role in governing ionic conductivity, as well as the enhancement of Li + transport numbers with increasing salt concentration. Addition of small amounts of water leads to increased conductivity and ion mobilities due to the water coordinating with the Li + ions, which reduces direct interactions with larger charged species.

Classical molecular dynamic simulations↗
DOE OSTI2024

Controlling Ion Uptake in Carboxylated Mixed Conductors

Organic mixed ionic‐electronic conductors (OMIECs) have garnered significant attention due to their capacity to transport both ions and electrons, making them ideal for applications in energy storage, neuromorphics, and bioelectronics. However, charge compensation mechanisms during the polymer redox process remain poorly understood, and are often oversimplified as single‐ion injection with little attention to counterion effects. To advance understanding and design strategies toward next‐generation OMIEC systems, a series of p‐channel carboxylated mixed conductors is investigated. Varying side‐chain functionality, distinctive swelling character is uncovered during electrochemical doping/dedoping with model chao‐/kosmotropic electrolytes. Carboxylic acid functionalized polymers demonstrate strong deswelling and mass reduction during doping, indicating cation expulsion, while ethoxycarbonyl counterparts exhibit prominent mass increase, pointing to an anion‐driven doping mechanism. By employing operando grazing incidence X‐ray fluorescence (GIXRF), it is revealed that the carboxyl functionalized polymer engages in robust cation interaction, whereas ester functionalization shifts the mechanism towards no cation involvement. It is demonstrated that cations are pivotal in mitigating swelling by counterbalancing anions, enabling efficient anion uptake without compromising performance. These findings underscore the transformative influence of functionality‐driven factors and side‐chain chemistry in governing ion dynamics and conduction, providing new frameworks for designing OMIECs with enhanced performance and reduced swelling.

carboxylated polythiophenes↗
DOE OSTI2026

Effect of Thermodynamic and Environmental Factors on Crystallization of DNA‐Origami Superlattices

The directed self‐assembly of nanoscale materials into ordered superlattices presents a powerful strategy for creating next‐generation materials with programmable mechanical, optical, and photonic properties. Deoxyribonucleic acid (DNA) origami has emerged as a versatile scaffold for encoding nanoscale geometry and guiding the crystallization of complex 3D architectures. However, a systematic understanding of the parameters that govern the efficiency and quality of superlattice formation remains limited. In this study, we utilize octahedral DNA nanoscale frames as a model system to investigate the relative influence of key factors, including buffer composition, ionic strength, frame concentration, and thermal annealing protocols, on the size, order, and reproducibility of the resulting superlattices. Our findings provide a quantitative framework to rationally optimize DNA‐based assembly pathways. Structural characterization via small‐angle x‐ray scattering (SAXS), scanning electron microscopy (SEM), and optical microscopy validates the quality and fidelity of the assembled lattices. Moreover, by templating these DNA frameworks into inorganic replicas, we establish general design principles that extend beyond biomolecular systems, providing a foundation for the synthesis of programmable materials in broader nanofabrication contexts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Selective Covalent Basal Plane Modification as a Probe of Hydroxide Ion Conduction Pathways in Magnesium Aluminum Layered Double Hydroxides

Understanding ionic conduction in layered double hydroxides (LDHs) is a crucial step towards utilizing them as solid, hydroxide ion‐conducting electrolytes in energy conversion applications. We selectively modified the interlayer and external surfaces of MgAl LDHs with tris(hydroxymethyl)aminomethane (TRIS) ligands. By adjusting the concentration of the TRIS surface modifier, the LDH basal plane surfaces could be functionalized everywhere (internally and externally) or only externally. External modification resulted in loss of OH‐conductivity compared to pristine LDHs, confirming that external platelet surfaces are the primary ion conduction pathway.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Exploring Phosphonium‐Based Anion Exchange Polymers for Moisture Swing Direct Air Capture of Carbon Dioxide

This study explores the performance and stability of ammonium and phosphonium-based polymeric ionic liquids (PILs) with methyl and butyl substituents in moisture-swing direct air capture of CO 2 . The polymers are synthesized with chloride counterions, followed by ion exchange to the bicarbonate ion, and tests for CO 2 capture capacity and stability under cyclic wet–dry conditions. The phosphonium polymer with methyl substituents [PVBT-MeP] demonstrates the highest CO 2 capture capacity at ≈510 µmol g⁻¹, attributed to minimal steric hindrance and stronger ion pairing with bicarbonate. However, oxidative degradation is detected by 31 P NMR spectroscopy after the moisture swing experiment, with the appearance of a phosphine oxide peak at 61.28 ppm, which indicates phosphorus oxidation as the primary degradation pathway. In contrast, the ammonium polymer with butyl substituents [PVBT-BuN] exhibits the highest stability, showing no degradation over five moisture swing cycles. Additional stability experiments in 0.5 m KHCO 3 solutions reveal no degradation for any PIL, suggesting that oxidative degradation is driven by dynamic acid-base reactions during the moisture swing cycles in the air. Furthermore, these findings reveal the potential of phosphonium-based PILs for moisture-swing direct air capture, achieving high capacity while highlighting the need for optimized stability through counterion and structural design.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Transport of penetrants in polymeric materials

Transport phenomena of chemical species in polymers underpin many applications. This mini-review discusses several key transport scenarios in polymer gels, melts and crosslinked polymer networks. Transport mechanisms of a wide variety of penetrant and polymer chemistries are discussed via activated hopping theory and cover across the rubbery, intermediate/deeply supercooled and glassy states of polymers. Moreover, we also discuss the ionic conductivity in polymer electrolytes, emphasizing the relationship between ion diffusion and the segmental relaxation of polymers and highlighting current challenges in the community. Finally, potential research directions are suggested concerning how external fields, such as mechanical force fields, active matter and self-propelling particles, affect the particle transport in polymers. This mini-review offers a general overview of motivations for studying penetrant transports in polymers and diverse mechanisms involved.

activated hopping↗
DOE OSTI2026

Processing iridium foil targets for the production of radioplatinum isotopes

Dissolving noble metals remains challenging because of their high reduction potentials and tendency to passivate as oxides. This barrier is acute for iridium metal targets used to produce platinum radioisotopes, where post-irradiation processing is costly and hazardous with conventional routes. Here, we report a rapid alkali-fusion method that converts Ir metal directly into chloride media compatible with downstream separations. In the process, an Ir foil is fused with Na 2 O 2 and KCl at temperatures above the KCl melting point; the molten salt enhances heat transfer and facilitates O 2− /Na + transport to the Ir surface, overcoming Ir's oxidation resistance. The fused cake is then cooled and leached in 10 M HCl, yielding Ir in solution without specialized microwave digestion or HF. Pt separation from bulk Ir was evaluated using extraction-chromatography resins. A newly formulated ionic-liquid resin containing Cyphos IL 104 (E104) was compared with two commercial resins (TrisKem TK200 and TK201). All resins achieved >90 % Ir recovery. Pt co-recovery depended on resin chemistry: TK200 recovered 85.9 % Pt, TK201 recovered 54.1 % Pt, and E104 recovered 72.9 % Pt. This study introduces a fast, scalable dissolution route for solid Ir targets and demonstrates resin choices that tune Ir/Pt separation, lowering the barrier to routine production and purification of Pt radioisotopes.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2024

Theoretical design and performance of three-dimensional, pillared FeS 2 cathodes

Three-dimensional (3D) electrode design can provide improved capacities and rate capabilities over conventional two-dimensional electrodes by enhancing electrical and ionic transport. Here, expanding upon our previous modeling efforts for conversion chemistry lithium-ion batteries, we develop a pseudo-four-dimensional (P4D) approach that is subsequently used to investigate the design of a pillared FeS 2 electrode. The model considers transport in three dimensions with an additional “fourth” dimension corresponding to the solid-state lithium transport within the active material particles. Additionally, we allow for expansion of the active material during the conversion reaction to understand how internal stresses impact the electrochemical performance of the cell. By optimizing the model with respect to areal capacity, we are able to predict areal capacities up to 16.8 mAh/cm 2 for an areal current density of 1.78 mA/cm 2 and a 103% improvement for the three-dimensional electrodes over planar electrodes of equal volume. Despite the promising results, our simulations suggest that 3D design may be difficult for conversion cathode materials due to the large internal stresses that arise during conversion. Nevertheless, the model is robust and adaptable to other materials that may be more suitable for 3D electrodes due to a lesser change in volume during discharge.

Conversion cathode materials↗
DOE OSTI2024

Probing the potential of type V Deep eutectic solvents as sustainable electrolytes

The increasing interest within the scientific community in environmentally friendly solvents has led to a focus on Deep Eutectic Solvents (DES), which have natural components. DES are viewed as alternatives to traditional organic solvents and have the potential to be used as electrolytes. For the first time, transport properties of four Type V Deep Eutectic Salt Solutions (DESS) were accessed to investigate the potential of this technology, selecting precursors ranked as excellent in Eco-Scale metrics. The DESS were composed of terpene and trioctylphosphine oxide (TOPO), and varying concentrations of lithium bis(trifluoromethane)sulfonimide (LiTFSI), and their properties were assessed through self-diffusion, viscosity, density, and conductivity measurements. While Type V DESS are capable of dissolving significant amounts of LiTFSI (up to 30 % molar), their ionic conductivity is low, with values ranging from 3.6·10 –3 to 9.3·10 –2 mS·cm –1 at 25 °C, thus limiting their suitability as electrolytes, for instance, for lithium-ions batteries applications. Similar diffusion coefficients for Li + and TFSI – ions suggest the formation of long-lived ion pairs moving as a neutral species. As a result, future research aims to introduce additives to disrupt contact ion pairs and enhance transport properties, leveraging the sustainable appeal of DES and their use in advanced energy storage technologies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

The carbon challenge: Design, synthesis, and chemisorption behavior of solid sorbents in direct air capture of carbon dioxide

Direct air capture (DAC) of CO 2 is a promising solution for reducing the carbon footprint through "negative emission" technology. However, the low CO 2 concentration (~400 ppm) and the dynamic nature of DAC processes present challenges in designing effective sorbent systems. Recent advancements in material design and structural engineering have led to the development of high-performance solid sorbents, offering a more stable, safe, and energy-efficient alternative to traditional liquid CO 2 capture methods. This review highlights progress in solid sorbent-based DAC, focusing on amine-modified materials, hydrogen-bonded frameworks, and ionic liquid-engineered scaffolds. The discussion covers design principles, synthesis methodologies, and their impact on CO 2 chemisorption, comparing the advantages and limitations of each approach. Characterization techniques, especially operando methods and computational tools, are reviewed to understand sorbent behavior during CO 2 integration and release. The reaction pathways and interaction mechanisms of these sorbents with CO 2 are analyzed to guide future design. Additionally, the CO 2 chemisorption behaviors, including capacity, sorption kinetics, recyclability, and durability in the presence of gaseous impurities and under humid conditions will be evaluated and compared. Further, the review offers unique insights into the physical properties, chemical structures, and surface engineering effects of these sorbents, based on comprehensive characterization and evaluation techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

The power of lanthanides: same composition, but different lanthanides leading to different interesting materials properties, from magnetocalorics to molecular magnets and phosphors

Commonly accepted design concepts for ionic liquids (ILs) state that the constituting ions must be large and carry low, well-dispersed charges. A series of ILs based of pentadeca charged ILs with pentanuclear linear {Ln 5 } units ([Ln 5 (C 2 H 5 -C 3 H 3 N 2 -CH 2 COO) 16 (H 2 O) 8 ](Tf 2 N) 15 (C 3 H 3 N 2 = imidazolium moiety, Tf 2 N = bis(trifluoromethanesulfonyl)amide) with Ln = Er, Ho, Tm) demonstrates that these criteria are not absolute. Highly charged ions can also support IL formation, provided they are sufficiently large. Expanding the series of these unconventional, record pentadeca charged with new lanthanide representatives, led to the discovery of additional unprecedented properties for ILs: The Gd compound exhibits a strong magnetocaloric effect (MCE) in the liquid state with a maximum magnetic entropy change of −ΔS M = −11 J⋅kg −1 ⋅K −1 at 2 K for Δμ 0 H = 7 T. Albeit the Dy representative shows slow magnetic relaxation, the relaxation times are not favorable for practical application as a molecular magnet. Lastly, for both the Gd and the Y compound, phosphorescence in the seconds time scale is observed, which is, to the best of our knowledge, the longest ever reported for an IL.

Ionic Liquids↗
DOE OSTI2025

Investigation of electrode-electrolyte interfaces to enable non-flammable Li-ion batteries operating up to 125°C with liquid electrolyte

Non-flammable and high-temperature stable ionic liquid (IL)-based electrolytes could eliminate catastrophic battery failures and improve battery safety, but their poor electrochemical interaction with the LiNi x Mn y Co z O 2 (NMC) family of cathodes is a long-standing problem due to severe parasitic reactions at high temperature. Understanding surface and bulk structural mechanisms of NMC-type cathodes at elevated operational temperature is of paramount importance to facilitate stable electrochemical performance. Here, we report a non-flammable phosphonium IL-based cell chemistry that offers stable electrode-electrolyte interfaces, leading to electrochemical performance up to 125°C and high-temperature safety. We combine electrochemistry with multimodal X-ray spectroscopy methods to understand interfaces at elevated temperature (100°C). This nanoscale understating enables a proof-of-concept high-temperature cylindrical cell (14500), and the design achieves an average Coulombic efficiency of ≈99.5% up to 300 cycles at 100°C. The results ascertain the significance of depth-dependent degradation at the interface, guiding room-temperature Li-ion technology toward extreme-temperature applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Sorbent Regeneration via Radiofrequency-Assisted Dielectric Heating for Direct Air Capture of CO 2

Direct air capture (DAC) of CO 2 is a negative emission technology that utilizes sorbents requiring a regeneration step for repeated ab(/d)sorption–desorption cycles. Here we report an unconventional approach to desorb captured CO 2 from a porous sorbent using radiofrequency (RF) irradiation for dielectric heating and targeted energy transfer, thus enabling modularity and promoting renewable energy input. Regeneration of composites of functional ionic liquid and metal–organic framework with high CO 2 capacity and enhanced transport is demonstrated under conditions relevant to DAC. RF-assisted dielectric heating at the megahertz frequency range shows effective absorption of electromagnetic energy and consequently rapid release of the captured CO 2 .

Ionic liquids↗
DOE OSTI2026

Additive-Induced Morphology Change of Polymer Film Enables Enhanced Charge Mobility and Faster Organic Electrochemical Transistor Switching

Conjugated polymers (CPs) play an important role in organic electrochemical transistors (OECTs) for bioelectronics and related applications, where they serve as channel materials. Currently, most successful polymers for CPs are re-engineered from traditional CPs by replacing hydrophobic alkyl side chains with hydrophilic ethylene glycol or ionic groups. Frustratingly, the enhanced ion transport often compromises the charge mobility of the original CP. In this work, we present an additive-mediated method to construct a modified poly(3-hexylthiophene) (P3HT) film to enable efficient ion migration. The additive is designed with a cleavable diazo group that releases nitrogen and 2-methoxyethanol, a volatile compound, to alter the P3HT film morphology. OECTs based on the film exhibit improved response times. Interestingly, the process also enhances the crystallinity of P3HT, leading to higher hole mobility compared with pristine P3HT. This study proposes an in situ strategy to achieve the functionality of the OMIEC via morphological regulation, offering a promising route to simultaneously enhance both ion accessibility and charge mobility.

Organic polymers↗