Search NASA⌕ Search

SEARCH · Search NASA

Results for “knowledge representation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Evaluating the functionality and streamflow impacts of explicitly modelling forest-snow interactions and canopy gaps in a distributed hydrologic model

Many plot-scale observational studies found that snow cover dynamics in forest gaps are distinctly different from open and continuously forested areas, and canopy gaps have the potential to increase snow retention and alter the snow regime. However, our knowledge on forest-snow interactions in discontinuous forests with canopy gaps and their implications for forest and water management is far more limited. We address this knowledge gap through a major enhancement of a widely used distributed hydrologic model, DHSVM. We developed a canopy gap component as a unique vegetation type that is characterized on the subgrid scale, with physics-based representation of processes that allow independent evolution of snowpack in forest gaps. We validated the enhanced DHSVM for three experimental sites in close proximity consisting of a completely open site, a densely forested site, and a canopy gap site. Despite the scale mismatch between point measurements and grid-scale simulations, the modeled snow water equivalent (SWE) agreed reasonably well with the continuous observations collected during one full ablation season at all sites. Evaluation of snowpack energetics suggested that snow ablation at three sites was controlled primarily by net radiation that critically depends on the canopy cover and structure. While the rate of snowmelt remained relatively constant in the forest during the ablation season, the gap demonstrated marked temporal variability in ablation rate as a result of complex interplay between canopy structure of the adjacent forest and the angle of solar incidence. The comparison of this enhanced version to the original DHSVM highlighted the importance of explicitly accounting for forest impacts on the gap snowpack energy balance. Between the two versions, the greatest difference in snow ablation rates was found in smaller gaps. The enhanced model tends to predict notably later melt for small to medium canopy gaps (the ratio of gap radius to canopy height r/h = 1.3), and snow melt rates exhibit great sensitivity to changing gap size in medium-size gaps (0.5 = r/h = 1.3).

Forest-Snow Dynamics, Canopy Gap, Snow Hydrology, ↗

The Science of Interaction

There is a growing recognition with the visual analytics community that interaction and inquiry are inextricable. It is through the interactive manipulation of a visual interface – the analytic discourse – that knowledge is constructed, tested, refined, and shared. This paper reflects on the interaction challenges raised in the original visual analytics research and development agenda and further explores the relationship between interaction and cognition. It identifies recent exemplars of visual analytics research that have made substantive progress toward the goals of a true science of interaction, which must include theories and testable premises about the most appropriate mechanisms for human-information interaction. Six areas for further work are highlighted as those among the highest priorities for the next five years of visual analytics research: ubiquitous, embodied interaction; capturing user intentionality; knowledge-based interfaces; principles of design and perception; collaboration; and interoperability. Ultimately, the goal of a science of interaction is to support the visual analytics community through the recognition and implementation of best practices in the representation of and interaction with visual displays.

97 MATHEMATICS AND COMPUTING↗

Co-orchestration of multiple instruments to uncover structure–property relationships in combinatorial libraries

The rapid growth of automated and autonomous instrumentation brings forth opportunities for the co-orchestration of multimodal tools that are equipped with multiple sequential detection methods or several characterization techniques to explore identical samples. This is exemplified by combinatorial libraries that can be explored in multiple locations via multiple tools simultaneously or downstream characterization in automated synthesis systems. In co-orchestration approaches, information gained in one modality should accelerate the discovery of other modalities. Correspondingly, an orchestrating agent should select the measurement modality based on the anticipated knowledge gain and measurement cost. Herein, we propose and implement a co-orchestration approach for conducting measurements with complex observables, such as spectra or images. The method relies on combining dimensionality reduction by variational autoencoders with representation learning for control over the latent space structure and integration into an iterative workflow via multi-task Gaussian Processes (GPs). This approach further allows for the native incorporation of the system's physics via a probabilistic model as a mean function of the GPs. We illustrate this method for different modes of piezoresponse force microscopy and micro-Raman spectroscopy on a combinatorial Sm-BiFeO3 library. However, the proposed framework is general and can be extended to multiple measurement modalities and arbitrary dimensionality of the measured signals.

47 OTHER INSTRUMENTATION↗

Data-driven learning of Mori–Zwanzig operators for isotropic turbulence

Developing reduced-order models for turbulent flows, which contain dynamics over a wide range of scales, is an extremely challenging problem. In statistical mechanics, the Mori–Zwanzig (MZ) formalism provides a mathematically exact procedure for constructing reduced-order representations of high-dimensional dynamical systems, where the effects due to the unresolved dynamics are captured in the memory kernel and orthogonal dynamics. Turbulence models based on MZ formalism have been scarce due to the limited knowledge of the MZ operators, which originates from the difficulty in deriving MZ kernels for complex nonlinear dynamical systems. In this work, we apply a recently developed data-driven learning algorithm, which is based on Koopman's description of dynamical systems and Mori's linear projection operator, on a set of fully resolved isotropic turbulence datasets to extract the Mori–Zwanzig operators. With data augmentation using known turbulence symmetries, the extracted Markov term, memory kernel, and orthogonal dynamics are statistically converged and the generalized fluctuation–dissipation relation can be verified. The properties of the memory kernel and orthogonal dynamics, and their dependence on the choices of observables are investigated to address the modeling assumptions that are commonly used in MZ-based models. A series of numerical experiments are then constructed using the extracted kernels to evaluate the memory effects on prediction. The results show that the prediction errors are strongly affected by the choice of observables and can be further reduced by including the past history of the observables in the memory kernel.

97 MATHEMATICS AND COMPUTING↗

Node-degree aware edge sampling mitigates inflated classification performance in biomedical random walk-based graph representation learning

Motivation: Graph representation learning is a family of related approaches that learn low-dimensional vector representations of nodes and other graph elements called embeddings. Embeddings approximate characteristics of the graph and can be used for a variety of machine-learning tasks such as novel edge prediction. For many biomedical applications, partial knowledge exists about positive edges that represent relationships between pairs of entities, but little to no knowledge is available about negative edges that represent the explicit lack of a relationship between two nodes. For this reason, classification procedures are forced to assume that the vast majority of unlabeled edges are negative. Existing approaches to sampling negative edges for training and evaluating classifiers do so by uniformly sampling pairs of nodes. Results: We show here that this sampling strategy typically leads to sets of positive and negative examples with imbalanced node degree distributions. Using representative heterogeneous biomedical knowledge graph and random walk-based graph machine learning, we show that this strategy substantially impacts classification performance. If users of graph machine-learning models apply the models to prioritize examples that are drawn from approximately the same distribution as the positive examples are, then performance of models as estimated in the validation phase may be artificially inflated. We present a degree-aware node sampling approach that mitigates this effect and is simple to implement. Availability and implementation: Our code and data are publicly available at https://github.com/monarch-initiative/negativeExampleSelection.

59 BASIC BIOLOGICAL SCIENCES↗

Mariner 9 - An instrument of dynamical science

We review and evaluate the contributions of Mariner 9 in improving our knowledge of the dynamical characteristics of Mars and its two satellites, Phobos and Deimos. Primary results include the discovery of the large gravitational and topographical bulge in the Tharsis region, the development of a detailed gravity model representable as coefficients in a spherical harmonic expansion, the development of a topographic model exhibiting a three kilometer displacement of the center of figure from the center of mass, and the determination of the size, shape and motion of Phobos and Deimos.

Jordan, J. F.↗

Quantitative determination of stratospheric aerosol characteristics

The author has identified the following significant results. In the S192 data, a peak was apparent in the lower altitudes that was not present in the shorter wavelengths and grew with increasing wavelength beginning with band 7. For ten S192 wavelengths, the relative altitude increment was determined by knowledge of the relative position of the highest point in the scan arc. Using this scheme, results of scaling and inverting data for passes 47 and 61 were put into two models. Each result had three chart representations: (1) limb brightness measurement, (2) attenuation coefficients, and (3) ratio of the aerosol and Rayleigh coefficients to accentuate layers.

Tingey, D. L.↗

Flow fields of low pressure vent exhausts

The flow field produced by low pressure gas vents are described based on experimental data obtained from tests in a large vacuum chamber. The gas density, pressure, and flux at any location in the flow field are calculated based on the vent plume description and the knowledge of the flow rate and velocity of the venting gas. The same parameters and the column densities along a specified line of sight traversing the plume are also obtained and shown by a computer generated graphical representation. The fields obtained with a radically scanning Pitot probe within the exhausting gas are described by a power of the cosine function, the mass rate, and the distance from the exit port. The field measurements were made for gas at pressures ranging from 2 to 50 torr venting from pipe fittings with diameters to 3/16 to 1-1/2 inches I.D. (4.76 to 38.1 mm). The N2 mass flow rates ranged from 2E-4 to 3.7E-1 g/s.

Scialdone, John J.↗

VizBrick: A GUI-based Interactive Tool for Authoring Semantic Metadata for Building Datasets

Brick ontology is a unified semantic metadata schema to address the stand-ardization problem of buildings' physical, logical, and virtual assets and the relationships between them. Creating a Brick model for a building dataset means that the dataset's contents are semantically described using the standard terms defined in the Brick ontology. It will enable the benefits of data standardization, without having to recollect or reorganize the data and opens the possibility of automation leveraging the machine readability of the semantic metadata. The problem is that authoring Brick models for building datasets often requires knowledge of semantic technology (e.g., on-tology declarations and RDF syntax) and leads to repeated manual trial and error processes, which can be time-consuming and challenging to do with-out an interactive visual representation of the data. We developed VizBrick, a tool with a graphical user interface that can assist users in creating Brick models visually and interactively without having to understand the Re-source Description Framework (RDF) syntax. VizBrick provides handy ca-pabilities such as keyword search for easy find of relevant brick concepts and relations to their data columns and automatic suggestions of concept mapping. In this demonstration, we present a use-case of VizBrick to show-case how a Brick model can be created for a real-world building dataset.

Lee, Sangkeun (Matt)↗

Further Development of an ISOCS - based Advanced In Situ Gamma Spectrometry Services Tool for Waste Measurements - 17452

Canberra's In Situ Object Counting System is an established tool used for gamma spectrometry allowing a physical representation of complex geometries and mathematical calculation of the calibration function while avoiding the need for radioisotope standards. The ISOCS Uncertainty Estimator tool can be used to calculate defensible systematic calibration uncertainties. However the uncertainties depend on knowledge of the properties of the item being measured and for poorly characterized materials these can be large, often leading to large costs for waste sentencing. An ISOCS-based advanced in-situ gamma spectrometry services tool has been developed to reduce those uncertainties. This system is based on generating and comparing a range of candidate geometry models that yield figures of merit indicative of improved consistency between modelled data and available diverse measurement data. The approach and results of initial performance testing have previously been published, demonstrating an analysis procedure and enhanced accuracy for measurement of a low density 200 litre waste drum, based on measurements with known sources placed at different positions. It was shown how the accuracy of assay of Am-241 in a light matrix can be significantly improved. Further analysis has now been performed, with reference to measurements of a second drum, containing a standard matrix of higher density, and with a multiple radionuclide line source (Ba-133, Cs-137, Eu-152 and Am-241). These measurements represent a more challenging waste assay scenario, corresponding to potentially much larger assay uncertainties. Our results show how the assay uncertainty can be reduced, by careful application of AIGS, from relative values of the order of 100% to a few 10's of %. Furthermore, we demonstrate, through extended analysis of the test drum data, how an AIGS measurement program can be optimized to reduce the number of required measurement positions substantially. This paper describes these new results with comment on their importance and potential application for real waste assay projects. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Importance of Engineered and Learned Molecular Representations in Predicting Organic Reactivity, Selectivity, and Chemical Properties

Machine-readable chemical structure representations are foundational in all attempts to harness machine learning for the prediction of reactivities, selectivities, and chemical properties directly from molecular structure. The featurization of discrete chemical structures into a continuous vector space is a critical phase undertaken before model selection, and the development of new ways to quantitatively encode molecules is an active area of research. Here, we highlight the application and suitability of different representations, from expert-guided “engineered” descriptors to automatically “learned” features, in different prediction tasks relevant to organic and organometallic chemistry, where differing amounts of training data are available. These tasks include statistical models of stereo- and enantioselectivity, thermochemistry, and kinetics developed using experimental and quantum chemical data. The use of expert-guided molecular descriptors provides an opportunity to incorporate chemical knowledge, domain expertise, and physical constraints into statistical modeling. In applications to stereoselective organic and organometallic catalysis, where data sets may be relatively small and 3D-geometries and conformations play an important role, mechanistically informed features can be used successfully to obtain predictive statistical models that are also chemically interpretable. We provide an overview of several recent applications of this approach to obtain quantitative models for reactivity and selectivity, where topological descriptors, quantum mechanical calculations of electronic and steric properties, along with conformational ensembles, all feature as essential ingredients of the molecular representations used. Alternatively, more flexible, general-purpose molecular representations such as attributed molecular graphs can be used with machine learning approaches to learn the complex relationship between a structure and prediction target. This approach has the potential to out-perform more traditional representation methods such as “hand-crafted” molecular descriptors, particularly as data set sizes grow. One area where this is particularly relevant is in the use of large sets of quantum mechanical data to train quantitative structure–property relationships. A general approach toward curating useful data sets and training highly accurate graph neural network models is discussed in the context of organic bond dissociation enthalpies, where this strategy outperforms regression using precomputed descriptors. Finally, we describe how graph neural network predictions can be incorporated into mechanistically informed statistical models of chemical reactivity and selectivity. Once trained, this approach avoids the expensive computational overhead associated with quantum mechanical calculations, while maintaining chemical interpretability. We illustrate examples for which fast predictions of bond dissociation enthalpy and of the identities of radicals formed through cleavage of a molecule’s weakest bond are used in simple physical models of site-selectivity and reactivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experiences with making diffraction image data available: what metadata do we need to archive?

A local raw ‘diffraction data images’ archive was made available and some data sets were retrieved and reprocessed, which led to analysis of the anomalous difference densities of two partially occupied Cl atoms in cisplatin as well as a re-evaluation of the resolution cutoff in these diffraction data. General questions on storing raw data are discussed. It is also demonstrated that often one needs unambiguous prior knowledge to read the (binary) detector format and the setup of goniometer geometries. Recently, the IUCr (International Union of Crystallography) initiated the formation of a Diffraction Data Deposition Working Group with the aim of developing standards for the representation of raw diffraction data associated with the publication of structural papers. Archiving of raw data serves several goals: to improve the record of science, to verify the reproducibility and to allow detailed checks of scientific data, safeguarding against fraud and to allow reanalysis with future improved techniques. A means of studying this issue is to submit exemplar publications with associated raw data and metadata. In a recent study of the binding of cisplatin and carboplatin to histidine in lysozyme crystals under several conditions, the possible effects of the equipment and X-ray diffraction data-processing software on the occupancies and B factors of the bound Pt compounds were compared. Initially, 35.3 GB of data were transferred from Manchester to Utrecht to be processed with EVAL. A detailed description and discussion of the availability of metadata was published in a paper that was linked to a local raw data archive at Utrecht University and also mirrored at the TARDIS raw diffraction data archive in Australia. By making these raw diffraction data sets available with the article, it is possible for the diffraction community to make their own evaluation. This led to one of the authors of XDS (K. Diederichs) to re-integrate the data from crystals that supposedly solely contained bound carboplatin, resulting in the analysis of partially occupied chlorine anomalous electron densities near the Pt-binding sites and the use of several criteria to more carefully assess the diffraction resolution limit. General arguments for archiving raw data, the possibilities of doing so and the requirement of resources are discussed. The problems associated with a partially unknown experimental setup, which preferably should be available as metadata, is discussed. Current thoughts on data compression are summarized, which could be a solution especially for pixel-device data sets with fine slicing that may otherwise present an unmanageable amount of data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Minimal representations of supersymmetry and 1D N-Extended {sigma} models

We discuss the minimal representations of the 1D N-Extended Supersymmetry algebra (the Z{sub 2}-graded symmetry algebra of the Supersymmetric Quantum Mechanics) linearly realized on a finite number of fields depending on a real parameter t, the time. Their knowledge allows to construct onedimensional sigma-models with extended off-shell supersymmetries without using superfields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flow fields of low pressure vent exhausts

The flow field produced by low pressure gas vents are described based on experimental data obtained from tests in a large vacuum chamber. The gas density, pressure, and flux at any location in the flow field are calculated based on the vent plume description and the knowledge of the flow rate and velocity of the venting gas. The same parameters and the column densities along a specified line of sight traversing the plume are also obtained and shown by a computer-generated graphical representation. The fields obtained with a radially scanning Pitot probe within the exhausting gas are described by a power of the cosine function, the mass rate and the distance from the exit port. The field measurements were made for gas at pressures ranging from 2 to 50 torr venting from pipe fittings with diameters of 3/16 inch to 1-1/2 inches I.D. (4.76 mm to 38.1 mm). The N(2) mass flow rates ranged from 2E-4 to 3.7E-1 g/s.

Scialdone, John J.↗

A novel representation for planning 3-D collision-free paths

A new scheme for the representation of objects, the successive spherical approximation (SSA), facilitates the rapid planning of collision-free paths in a dynamic three-dimensional environment. The hierarchical nature of the SSA allows collisions to be determined efficiently while still providing an exact representation of objects. The rapidity with which collisions can be detected, less than 1 sec per environment object per path, makes it possible to use a generate-and-test path-planning strategy driven by human conceptual knowledge to determine collision-free paths in a matter of seconds on a Sun 3/180 computer. A hierarchy of rules, based on the concept of a free space cell, is used to find heuristically satisfying collision-free paths in a structured environment.

Bonner, Susan↗

Domain knowledge-informed, process-mapping AI graph for designing Fe-based alloys

<span style="font-family: Calibri, sans-serif; font-size: 12pt;">Continuous improvement in efficiency of a power plant relies on designing materials for use at increasingly higher temperature and/or pressure, for 100,000s hours of operation. Due to complexity, non-linearity and high-dimensionality of the problem, traditional Machine Learning (ML) approaches require unreasonably large datasets for the data-driven model development. Science-based material and process engineering complements hard data with, sometimes soft and intuitive, empirical domain knowledge. Artificial Intelligence (AI) was used in this study to incorporate such knowledge into computational graph architecture (process-mimicking artificial neuron design, causal layer and graph structures, ensemble modeling of latent states) and learning procedures (variable transformation, fuzzy physics pre-training and freezing of deep layers, virtual microstructure representation, and adversarial multi-objective optimization). The first alloys design pathways suggested by the AI tool (pyroMind) passed a preliminary engineering review on soundness and transparency.</span>

Romanov, Vyacheslav↗

Computational representation of biological systems

Integration of large and diverse biological data sets is a daunting problem facing systems biology researchers. Exploring the complex issues of data validation, integration, and representation, we present a systematic approach for the management and analysis of large biological data sets based on data warehouses. Our system has been implemented in the Bioverse, a framework combining diverse protein information from a variety of knowledge areas such as molecular interactions, pathway localization, protein structure, and protein function.

59 BASIC BIOLOGICAL SCIENCES↗

Knowledge-based decision support for Space Station assembly sequence planning

A complete Personal Analysis Assistant (PAA) for Space Station Freedom (SSF) assembly sequence planning consists of three software components: the system infrastructure, intra-flight value added, and inter-flight value added. The system infrastructure is the substrate on which software elements providing inter-flight and intra-flight value-added functionality are built. It provides the capability for building representations of assembly sequence plans and specification of constraints and analysis options. Intra-flight value-added provides functionality that will, given the manifest for each flight, define cargo elements, place them in the National Space Transportation System (NSTS) cargo bay, compute performance measure values, and identify violated constraints. Inter-flight value-added provides functionality that will, given major milestone dates and capability requirements, determine the number and dates of required flights and develop a manifest for each flight. The current project is Phase 1 of a projected two phase program and delivers the system infrastructure. Intra- and inter-flight value-added were to be developed in Phase 2, which has not been funded. Based on experience derived from hundreds of projects conducted over the past seven years, ISX developed an Intelligent Systems Engineering (ISE) methodology that combines the methods of systems engineering and knowledge engineering to meet the special systems development requirements posed by intelligent systems, systems that blend artificial intelligence and other advanced technologies with more conventional computing technologies. The ISE methodology defines a phased program process that begins with an application assessment designed to provide a preliminary determination of the relative technical risks and payoffs associated with a potential application, and then moves through requirements analysis, system design, and development.

Source record↗