Search NASA⌕ Search

SEARCH · Search NASA

Results for “linear response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

NASTRAN computer system level 12.1

Program uses finite element displacement method for solving linear response of large, three-dimensional structures subject to static, dynamic, thermal, and random loadings. Program adapts to computers of different manufacture, permits up-dating and extention, allows interchange of output and input information between users, and is extensively documented.

Butler, T. G.↗

Electromagnetic plasma wave propagation along a magnetic field

The linearized response of a Vlasov plasma to the steady-state excitation of transverse plasma waves along an external magnetic field is examined. Assuming a delta-function excitation mechanism, and performing a detailed Vlasov-Maxwell equation analysis using Fourier-Laplace transforms, the plasma response is found to consist of three terms: a branch-cut term, a free-streaming term, and a dielectric-pole term. Also considered is the phenomenon of plasma wave echoes. The case of longitudinal electrostatic waves is extended to the case of transverse plasma waves that propagate along an external magnetic field. It is shown that a transverse echo results in lowest order only when one excitation is transverse and the other is longitudinal.

Olson, C. L.↗

Laboratory and field evaluation of an underwater sand height gage

An underwater sand height gage was investigated. This instrument consisted of two transducers, one screened and one unscreened. Laboratory experimentation included static and dynamic tests with three test sands--fine, medium, and coarse. Field tests were conducted at Rudee Inlet, Virginia Beach, Virginia. Test results showed a linear response to up to 10 inches of sand loading. Deviation observed in identical tests appeared to be due to variation in the density of sand. Density differences reflected varying packing styles which, in turn, were a consequence of grain size and flow regime. Further evaluations of the sand height gage reflect this instrument's potential.

Swift, D. J. P.↗

Electrographic observations of extended objects. II - The peculiar galaxies NGC 523 and NGC 1614

Electrographic analysis of two highly irregular galaxies, NGC 523 and NGC 1614 using a two dimensional detector with linear response and large information storage, dynamic range, and number of resolution elements is presented. The observation procedure is described, and analysis of the two systems is carried out. Data are graphically represented. The validity of electrographic observation of irregular extragalactic objects is underscored.

Chincarini, G.↗

Optical bias assembly

Assembly, used to achieve linear response in optical detection system, consists of tungsten lamp source, optical filters, fiber optics bundle, aperture mask, relay lens, and folding mirror. Tungsten lamp source provides sufficient background illumination to make input optical flux small compared to background.

Weagant, R.↗

A photon counting array photometer using an intensified charge coupled device

An array photometer which uses an intensified charge coupled device was developed. This system, the University of Maryland Array Photometer (UMAP), has the ability to discriminate single photoelectron events in real time at a 4 Megahertz rate. The photosensor uses an S-20 photocathode and a Fairchild CCD202 with a 100 by 100 array of separate individual channels. The overall system has demonstrated a noise level which permits single photoelectron discrimination, a scan rate of 400 frames per second, a very linear response, and very low lag. The UMAP system has a very large dynamic range exceeding 10,000 in the photon counting mode. A special technique to extend the dynamic range to 1,000,000 was described. The performance parameters of this system, both in the laboratory and on the telescope were cited. Data from these observations were discussed to illustrate the system sensitivity, which is basically limited by the pixel size in the array, rather than the electrooptics.

Currie, D. G.↗

Simulation of liquid propellant rocket engine combustion instabilities

A simulation technique for studying the high frequency combustion instabilities of liquid propellant rocket engines has been developed and used to investigate various aspects of instability phenomena. Of importance was investigation of the significance of the method of coupling the combustion and the gas dynamics of the system. Two coupling processes were studied: linear response of the combustion process to pressure fluctuations, and the nature of the resulting instabilities; and nonlinear response of the combustion process to velocity fluctuations, and the nature of the resulting instabilities. For the combustion model studied, nonlinear (velocity) coupling was found to more closely characterize liquid propellant instabilities.

Ventrice, M. B.↗

FASOR - A second generation shell of revolution code

An integrated computer program entitled Field Analysis of Shells of Revolution (FASOR) currently under development for NASA is described. When completed, this code will treat prebuckling, buckling, initial postbuckling and vibrations under axisymmetric static loads as well as linear response and bifurcation under asymmetric static loads. Although these modes of response are treated by existing programs, FASOR extends the class of problems treated to include general anisotropy and transverse shear deformations of stiffened laminated shells. At the same time, a primary goal is to develop a program which is free of the usual problems of modeling, numerical convergence and ill-conditioning, laborious problem setup, limitations on problem size and interpretation of output. The field method is briefly described, the shell differential equations are cast in a suitable form for solution by this method and essential aspects of the input format are presented. Numerical results are given for both unstiffened and stiffened anisotropic cylindrical shells and compared with previously published analytical solutions.

Cohen, G. A.↗

Fiber optic rotation sensor /FORS/ laboratory performance evaluation

A single axis rotation sensor, utilizing a 200 m single mode optical fiber in a 30 cm diameter coil has been constructed and tested in the laboratory. A He-Ne laser is the light source for the Sagnac interferometer-mode sensor. The outputs of Si detectors viewing two complementary interference patterns are electronically differenced to obtain a rotation-dependent signal. Linear response over a rotation rate range of about 0.0001 to 0.1 rad/sec was obtained.

Goldstein, R.↗

Some recent results in quiescent prominence spectrometry

This paper describes some recent results of a quiescent-prominence spectrometry program. The observations were made with a 25-cm coronagraph/coude spectrograph system using a silicon vidicon detector. This detector consists of 500 contiguous channels covering approximately 6 or 80 A, depending on the grating used. The instrument is interfaced to a computer system and has the important advantages of wide spectral response, linearity, and signal averaging with real-time display. Its principal drawback is the relatively small target size. For the present work, the aperture was about 3 x 5 arcsec. Absolute intensity calibrations were made by measuring quiet regions near the center of the sun.

Landman, D. A.↗

The excitation of density waves at the Lindblad and corotation resonances by an external potential

The linear response of a differentially rotating two-dimensional gas disk, both with and without self-gravity, to a rigidly rotating external potential is calculated on the assumptions that the speed of sound is much smaller that the orbital velocity and that the external potential varies on the scale of the disk radius. The results show that: (1) the external potential exerts torques on the disk only at the Lindblad and corotation resonances; (2) the torque is positive at the outer Lindblad resonance and negative at the inner Lindblad resonance; (3) the torque at corotation has the sign of the radial vorticity gradient; and (4) the torques are of the same order of magnitude at both types of resonance and independent of the speed of sound in the disk. It is found that the external potential also excites density waves in the vicinity of the Lindblad and corotation resonances, that the long trailing wave is excited at a Lindblad resonance, and that short trailing waves are excited at the corotation resonance. The behavior of particle disks is briefly discussed, and the external torques on particle disks are proven to be identical to those on gas disks

Goldreich, P.↗

Collisional redistribution of radiation. III - The equation of motion for the correlation function and the scattered spectrum

Computations were made of the scattering of monochromatic radiation by a degenerate atom in the binary-collision approximation for field strengths whose products of the Rabi frequency for atomic transition and the duration of a strong collision are much less than 1. An expression of motion for the correlation function is derived which does not exclude the region where thermal correlations may be neglected; the equation is valid outside the quantum-regression regime, and has a straightforward solution for practical cases. Solutions for the weak-field linear response regime are presented in terms of generalized absorption and emission profiles which depend on the indices of the atomic multipoles.

Burnett, K.↗

Blade loss transient dynamic analysis of turbomachinery

This paper reports on work completed to develop an analytical method for predicting the transient non-linear response of a complete aircraft engine system due to the loss of a fan blade, and to validate the analysis by comparing the results against actual blade loss test data. The solution, which is based on the component element method, accounts for rotor-to-casing rubs, high damping and rapid deceleration rates associated with the blade loss event. A comparison of test results and predicted response show good agreement except for an initial overshoot spike not observed in test. The method is effective for analysis of large systems.

Stallone, M. J.↗

Aerodynamic characteristics of a large-scale, twin tilt-nacelle V/STOL model

A subsonic tilt-nacelle V/STOL aircraft configuration is described which is powered by two turbofan engines, mounted on a single carry-through structure that is designed to maintain the thrust axis close to the center of gravity at nacelle incidences of 5-95 deg. Control during V/STOL operation, often from small ship platforms, is achieved by means of a vane assembly that is immersed in each turbofan's exhaust. Wind tunnel test data have been obtained with an 11.2-m wing span model for the vertical-to-horizontal flight transition capability of the concept. It is found that the aircraft can operate over a broad transition corridor, with sufficient maneuver capability about the trim points. The control vane exhibited linear response characteristics over a large deflection range, with little influence from power, angle of attack or ground proximity in hover. The model induced a positive ground effect in hover that increased as wheel height was approached and strake angle increased.

Falarski, M. D.↗