SEARCH · Search NASA

Results for “liquid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

NASA NTRS1991

Molecular dynamics of phenol at the liquid-vapor interface of water

Results of molecular dynamics calculations on phenol at the water liquid-vapor interface are presented. The density profile of the center of mass of phenol exhibits a maximum 1 A from the Gibbs surface toward the vapor phase, indicating that the molecule is surface-active. Changes in the profile caused by the interface extend 6 A from the Gibbs surface into the liquid, significantly more than change in the density profile of water. The most probable orientation of the solute at the surface is such that its symmetry axis is perpendicular to the interface with the OH substituent pointing toward the liquid. An additional simulation with benzene shows that this molecule at the surface most often adopts orientations parallel to the interface. Deeper in the liquid all the solutes are preferentially ordered perpendicular to the surface. In the interfacial region the orientational preferences of the solute are primarily determined by cavity formation needed to accommodate the hydrophobic portion of the dissolved molecule.

Pohorille, Andrew↗

DOE OSTI2022

Plasma parameters and the reduction potential at a plasma-liquid interface

We report nonthermal plasmas in contact with liquids have been shown to generate a variety of reactive species capable of initiating reduction–oxidation (redox) reactions at the electrochemically active plasma–liquid interface. In conventional electrochemical cells, selective redox chemistry is achieved by controlling the reduction potential at the solid electrode–electrolyte interface by applying a bias via an external circuit. In the case of plasma–liquid systems, an analogous means of tuning the reduction potential near the interface has not clearly been identified. When treated as a floating surface, the liquid is expected to adopt a net negative charge to balance the flux of hot electrons and relatively cold positive ions. The reduction potential near the plasma–liquid interface is hypothesized to be proportional to the floating potential, which can be approximated using an analytical model provided the plasma parameters are known. Herein, we present a framework for correlating the electron density and electron temperature of a noble gas plasma jet to the reduction potential near the plasma–liquid interface. The plasma parameters were acquired for an argon atmospheric plasma jet in contact with an aqueous solution by means of laser Thomson scattering. The reduction potential was determined using identical reference electrodes to measure the potential difference between the plasma–liquid interface and bulk solution. Interestingly, the measured reduction potentials near the plasma–liquid interface were found to be in good agreement with the model-predicted values determined using the plasma parameters obtained from the Thomson scattering experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2013

Improvements realized on the cryogenic solution called NiThrow{sub TM}

The economic, environmental, social and societal constraints have pushed the nuclear industry to develop new dismantling and decommissioning (D and D) techniques in order to meet the current industrial requirements. Since 5 years, AREVA, in partnership with Air Liquide, has been working on a new cryogenic solution that can be used to achieve the main important D and D operations (i.e. cutting, surface decontamination and concrete scrabbling). This solution, called NiThrow{sup TM}, is based on the Nitrocision LLC concept and consists in spraying highly pressurized liquid nitrogen (3500 bar) at a very low temperature (-140 deg. C) onto a surface. The main advantage in using liquid nitrogen instead of water is due to its rapid conversion into gaseous nitrogen that will avoid the generation of liquid effluent. The preliminary trials made in France at Saint Ouen l'Aumone and at the AREVA SICN facility by using NiThrow{sup TM} appeared to be very interesting and promising in terms of effectiveness, reduction of the dosimetry (i.e. ALARA principle) and adaptability to the different types of surfaces and materials to be treated. On an other hand, they also highlighted a couple of defects like a lack of reliability that is not compatible with a safety use in a nuclear environment. In 2009, with the aim of fixing all these issues, AREVA decided to start an extensive R and D program. This work has been essentially focused on the lancing tool, the insulation and the flexibility of the liquid nitrogen distribution network, but also on the design and the manufacturing of a waste collection unit and a dedicated carrier. Today, these R and D efforts have been totally completed. and resulted to the publication of 3 patents. Also, the collaboration, with Air Liquide and the American company Conco allows AREVA to propose to its customers a safe and reliable solution for their cleaning operations in France and all over the world. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Subtle Molecular Changes Largely Modulate Chiral Helical Assemblies of Achiral Conjugated Polymers by Tuning Solution-State Aggregation

Understanding the solution-state aggregate structure and the consequent hierarchical assembly of conjugated polymers is crucial for controlling multiscale morphologies during solid thin-film deposition and the resultant electronic properties. However, it remains challenging to comprehend detailed solution aggregate structures of conjugated polymers, let alone their chiral assembly due to the complex aggregation behavior. Herein, we present solution-state aggregate structures and their impact on hierarchical chiral helical assembly using an achiral diketopyrrolopyrrole-quaterthiophene (DPP-T4) copolymer and its two close structural analogues wherein the bithiophene is functionalized with methyl groups (DPP-T2M2) or fluorine atoms (DPP-T2F2). Combining in-depth small-angle X-ray scattering analysis with various microscopic solution imaging techniques, we find distinct aggregate in each DPP solution: (i) semicrystalline 1D fiber aggregates of DPP-T2F2 with a strongly bound internal structure, (ii) semicrystalline 1D fiber aggregates of DPP-T2M2 with a weakly bound internal structure, and (iii) highly crystalline 2D sheet aggregates of DPP-T4. These nanoscopic aggregates develop into lyotropic chiral helical liquid crystal (LC) mesophases at high solution concentrations. Intriguingly, the dimensionality of solution aggregates largely modulates hierarchical chiral helical pitches across nanoscopic to micrometer scales, with the more rigid 2D sheet aggregate of DPP-T4 creating much larger pitch length than the more flexible 1D fiber aggregates. Combining relatively small helical pitch with long-range order, the striped twist-bent mesophase of DPP-T2F2 composed of highly ordered, more rigid 1D fiber aggregate exhibits an anisotropic dissymmetry factor (g-factor) as high as 0.09. This study can be a prominent addition to our knowledge on a solution-state hierarchical assembly of conjugated polymers and, in particular, chiral helical assembly of achiral organic semiconductors that can catalyze an emerging field of chiral (opto)electronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Zirconium-Based Metal–Organic Framework for Removal of Perrhenate from Water

Efficient removal of pertechnetate (TcO4 -) anions from liquid waste or melter off-gas solution for alternative treatment is one of the promising options to manage 99Tc in legacy nuclear waste. Safe immobilization of 99Tc is of major importance due to its long half-life (t1/2= 2.13 × 105 yrs) and environmental mobility. Different types of inorganic and solid state ion-exchange materials such as layered double hydroxides have been shown to absorb TcO4 - anions from water. However, both high capacity and selectivity have yet to be achieved in a single material. Herein, we show that a protonated version of an ultra-stable zirconium based metalorganic framework can adsorb perrhenate (ReO4 -) anions, a non-radioactive surrogate for TcO4 -, from water even in the presence of other common anions. Synchrotron based powder X-ray diffraction and molecular simulations were used to identify the position of the adsorbed ReO4 - (surrogate for TcO4 -) molecule within the framework.

Banerjee, Debasis↗

DOE OSTI2025

Dehumidification energy storage using a stratified liquid desiccant tank

Liquid desiccants can play an important role in reducing dehumidification energy requirements in the built environment. Because they are in a liquid state, the desiccant can be easily stored and then used to dehumidify buildings during peak energy consumption periods. By maintaining stratification between concentrated and diluted desiccant solutions, a single tank can be used to store liquid desiccant for energy storage purposes. Using a stratified tank instead of separate tanks for dilute and concentrated solutions will reduce storage costs and increase energy storage densities for liquid desiccant systems. This paper describes the experimental validation and one-dimensional modeling of a stratified liquid desiccant tank. The stratified tank prototype developed achieved 80 % of the theoretical energy storage density based on an imposed desiccant concentration change. Here, the stratified tank model was able to reasonably reproduce the experimental results. Using this model, the impact of varying operational conditions on the energy density of the stratified liquid desiccant energy storage was evaluated. Depending on the operating conditions, stratified liquid desiccant energy storage using aqueous LiCl up to 40 wt% can achieve energy storage densities in excess of 330 kWh/m 3 .

25 ENERGY STORAGE↗

DOE OSTI2020

Solvent Selection for the Separation of Lignin-Derived Monomers Using the Conductor-like Screening Model for Real Solvents

The separation of desired monomers from a liquid-phase mixture of lignin depolymerization products is necessary to facilitate their upscaling and upgrading for industrial applications. One effective method to separate multiple liquid-phase products is countercurrent chromatography (CCC), which is a common liquid chromatography technique that separates target solutes based on differences in their partitioning in a biphasic solvent system. Effective CCC separation requires the selection of solvent compositions to tune solute partition coefficients. Here, to alleviate the experimental burden of selecting optimal solvent systems, we apply the conductor-like screening model for real solvents (COSMO-RS) method to compute partition coefficients of representative lignin monomers from four currently used depolymerization strategies in standard solvent systems. We further design new ternary and quaternary solvent systems that are predicted to further improve separation efficacy. On the basis of these predicted partition coefficients and empirical solvent selection criteria for CCC measurements, we suggest a range of solvent systems that would be suitable for the effective separation of aromatic lignin-derived products via CCC or similar liquid–liquid extraction methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2016

Dewatering Innovations - 16381

The Liquid and Gaseous Waste Operations (LGWO) project, located at the Oak Ridge National Laboratory, handles wastewater from over 600 generators in 200 facilities. LGWO processes these waters, removing radioactive and chemical contaminants prior to discharge to the environment. Through these processes, LGWO generates various sludges that require dewatering prior to transportation. The original process was very inefficient. It involved placing PVC tubing in the bottom of a 90 ft{sup 3} box and sluicing the sludge into the box. Suction was then applied to the PVC tubes to remove water that would settle out of the material. The old process took several evolutions to drain/decant the liquids, which caused unnecessary worker radiation exposure. The moisture content was Near High Moisture content, which presented the possibility that liquids could be released during transport. Due to this fact, disposal costs were very high. Solutions for the 'Old' disposal process were to use liquid-rated Super Sacks, add additional Absorbent and then have the containers evaluated for liquid at TSDRF, prior to final disposal. This paper will describe the innovative packaging that was developed for the processing of these sludges, the ease with which the process was implemented, the versatility of the system and the cost savings associated with the new process. This system can be used in many other water treatment applications and erosion control. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2018

Mesoscopic Structure Facilitates Rapid CO 2 Transport and Reactivity in CO 2 Capture Solvents

ABSTRACT: We present two-dimensional (2D) and three-dimensional (3D) chemical speciation of a switchable ionic liquid CO2 capture solvent to asses how these fluids facilitate CO2 transport at high solution viscosities. In this study, we use in situ liquid time-of-flight secondary ion mass spectrometry (ToF-SIMS) enabled by a vacuum-compatible microreactor. SIMS spectra show the existence of 1-((1,3-dimethylimidazolidin-2-ylidene)amino)propan-2-ol (IPADM-2-BOL) and CO2 + IPADM-2-BOL, con-firming the proposed zwitterionic CO2 binding mechanism. 2D and 3D chemical mapping showed IPADM-2-BOL exhibited a heterogeneous molecular structure, with regions of CO2-free IPADM-2-BOL coexisting with clusters of zwitterionic carbonate ions (IPADM-2-BOL + CO2). The solvent was composed of ~10–20 nm clusters of zwitterionic carbonate ions at any CO2 loading above 0%. The size of clusters was found not to grow with CO2 loading; rather, the concentration and distribution of clusters in-creased. 2D measurements also confirmed that the small clusters of bound CO2 aggregate in solution, coalescing to form >500 nm aggregates, and concurrently creating regions of unreacted solvent where CO2 can readily diffuse and immediately eact. The het-erogeneous domains introduce a trade-off between rapid CO2 diffusion and reactivity at the expense of a high solution viscosity.

Yu, Xiao-Ying↗

DOE OSTI2024

MaterialsMap: A CALPHAD-based tool to design composition pathways through feasibility map for desired dissimilar materials, demonstrated with resistance spot welding joining of Ag-Al-Cu

Assembly of dissimilar metals can be achieved by different methods, for example, casting, welding, and additive manufacturing (AM). However, undesired phases formed in liquid-phase assembling processes due to solute segregation during solidification diminish mechanical and other properties of the processed parts. In the present work, an open-source software named MaterialsMap, has been developed based on the CALculation of Phase Diagrams (CALPHAD) approach. The primary objective of MaterialsMap is to facilitate the design of an optimal composition pathway for assembling dissimilar alloys with liquid-phases based on the formation of desired and undesired phases along the pathway. In MaterialsMap, equilibrium thermodynamic calculations are used to predict equilibrium phases formed at slow cooling rate, while Scheil-Gulliver simulations are employed to predict non-equilibrium phases formed during rapid cooling. Additionally, by combining these two simulations, MaterialsMap offers a thorough guide for understanding phase formation in various manufacturing processes, assisting users in making informed decisions during material selection and production. As a demonstration of this approach, a compositional pathway was designed from pure Al to pure Cu through Ag using MaterialsMap. The design was experimentally verified using resistance spot welding (RSW).

36 MATERIALS SCIENCE↗

NASA NTRS1959

Heat Transfer in a Liquid Metal Flowing Turbulently through a Channel with a Step Function Boundary Temperature

An analytical heat transfer solution is derived and evaluated for the general case of a turbulently flowing liquid metal which suddenly encounters a step-function boundary temperature in a channel system. Local Nusselt moduli, dimensionless mixed-mean fluid temperatures, and arithmetic-mean Nusselt moduli are given as functions of Reynolds and Prandtl moduli and a dimensionless axial-distance modulus. These solutions are compared with known solutions of more specific systems as well as with a set of experimental liquid-metal heat transfer data for a thermal entrance region.

Poppendiek, H. F.↗

DOE OSTI2025

Improved liquid lithium surfaces in the Lithium Tokamak Experiment-β

Advances in vacuum, surface, and lithium conditioning techniques throughout five years of continuous operations in LTX-β have produced mirror-like liquid lithium surfaces and demonstrated the feasibility of high-performance tokamak discharges fully surrounded by liquid metal without significant operational problems. Improvements in conditioning techniques and procedures, including many weeks of baking and accumulation of 70 g of Li, led to reduced residual gasses and clean Li surfaces - all while still maintaining enough operational flexibility for multiple in-vacuum diagnostic upgrades and calibrations. Coatings had a visibly clean appearance, with reflective liquid metal demonstrating good wetting and surface adhesion with films that were now macroscopically thick. Solidified Li showed large crystal grains, while surface science measurements observed reduced impurities in the lithium. Steadily improved plasma performance was achieved with liquid lithium, with discharges able to match solid Li in terms of evolution of I p and n e , including rapid density pumping indicating low recycling. There were indications of moderately increased Li impurity influx, though few significant disturbances by the large liquid surfaces on tokamak operations over hundreds of discharges. Liquid metal plasma facing components are a potential solution to the extreme heat and particle fluxes that could cause unacceptable damage to solid materials, while liquid lithium also has the potential for greatly increased confinement in the low-recycling regime. While many liquid metal approaches are possible, and numerous experiments have been conducted in test stands and small modules in fusion devices, LTX-β is the only tokamak operated while fully surrounded by liquid metal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2026

Elucidating the Microscale Behavior and Phase Separation Kinetics of Thermally Responsive Ionic Liquid–Water Mixtures

Thermally responsive ionic liquids (ILs) exhibit liquid-liquid phase separation into a water-rich (WR) and ionic-liquid-rich (ILR) phase when heated above a lower critical solution temperature (LCST). This phase behavior has been leveraged for applications ranging from forward osmosis (FO) desalination, where the IL acts as a draw solute, to refrigeration and dehumidification cycles, where the IL acts as a liquid desiccant. While significant effort has been devoted to characterizing the thermodynamic and thermophysical properties of LCST ILs, their phase separation kinetics have not been investigated. In this work, we describe the macroscale phase separation kinetics (phase separation time) by gleaning insight into the microscale colloidal behavior of aqueous mixtures of four different materials, P 4444 TFA (tetrabutylphosphonium-2,4-trifluoroacetate), P 4444 DMBS (tetrabutylphosphonium-2,4-dimethyl-benzenesulfonate), N 4444 Sal (tetrabutylammonium salicylate), and P 4444 Sal (tetrabutylphosphonium salicylate) as a function of IL concentration at a separation temperature of 70 °C. We report the discontinuous microscale size distributions for each material and correlate their theoretical settling velocities to experimental phase separation times. The results indicate that a simple Stokes' law model can predict the phase separation time within reasonable accuracy. Overall, this work lays the foundation for understanding the micro- to macroscale phase separation behavior and kinetics of LCST ILs for various water-energy applications.

LCST↗

DOE OSTI2018

Thermally Responsive Hyperbranched Poly(ionic liquid)s: Assembly and Phase Transformations

Here, a library of linear and branched amphiphilic poly(ionic liquid)s based on hydrophobic cores and peripheral thermally sensitive shells was synthesized and studied with regard to their ability to form stimuli-responsive, organized assemblies in aqueous media. The thermally responsive derivatives of poly(ionic liquid)s were synthesized by neutralizing 32 terminal carboxyl groups of functionalized polyester cores by amine-terminated poly( N -isopropylacrylamide)s (PNIPAM) (50% and 100%). We observed that these hyperbranched poly(ionic liquid)s possessed a narrow low critical solution transition (LCST) window with LCST for hyperbranched compounds being consistently lower than that for linear PNIPAM containing counterparts. We found that the poly(ionic liquid)s form spherical micellar assemblies with diverse morphologies, such as micelles and their aggregates, depending on the terminal compositions with reduced sizes for hyperbranched poly(ionic liquid)s. Increasing temperature above LCST promoted formation of network-like aggregates, large vesicles, and spherical micelles. Moreover, all PNIPAM-terminated compounds exhibited distinct unimolecular prolate nanodomain morphology in contrast to common spherical domains of initial cores. We proposed a multilength scale organized morphology to describe the thermoresponsive poly(ionic liquid)s micellar assemblies and discussed their morphological transformations during phase transitions associated with changes in hydrophobic–hydrophilic balance of poly(ionic liquid)s with distinct hydrophobic cores and variable peripheral shells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS2005

Liquid Nitrogen Removal of Critical Aerospace Materials

Identification of innovative solutions to unique materials problems is an every-day quest for members of the aerospace community. Finding a technique that will minimize costs, maximize throughput, and generate quality results is always the target. United Space Alliance Materials Engineers recently conducted such a search in their drive to return the Space Shuttle fleet to operational status. The removal of high performance thermal coatings from solid rocket motors represents a formidable task during post flight disassembly on reusable expended hardware. The removal of these coatings from unfired motors increases the complexity and safety requirements while reducing the available facilities and approved processes. A temporary solution to this problem was identified, tested and approved during the Solid Rocket Booster (SRB) return to flight activities. Utilization of ultra high-pressure liquid nitrogen (LN2) to strip the protective coating from assembled space shuttle hardware marked the first such use of the technology in the aerospace industry. This process provides a configurable stream of liquid nitrogen (LN2) at pressures of up to 55,000 psig. The performance of a one-time certification for the removal of thermal ablatives from SRB hardware involved extensive testing to ensure adequate material removal without causing undesirable damage to the residual materials or aluminum substrates. Testing to establish appropriate process parameters such as flow, temperature and pressures of the liquid nitrogen stream provided an initial benchmark for process testing. Equipped with these initial parameters engineers were then able to establish more detailed test criteria that set the process limits. Quantifying the potential for aluminum hardware damage represented the greatest hurdle for satisfying engineers as to the safety of this process. Extensive testing for aluminum erosion, surface profiling, and substrate weight loss was performed. This successful project clearly demonstrated that the liquid nitrogen jet possesses unique strengths that align remarkably well with the unusual challenges that space hardware and missile manufacturers face on a regular basis. Performance of this task within the confines of a critical manufacturing facility marks a milestone in advanced processing.

Noah, Donald E.↗

DOE OSTI2014

Green polymer electrolytes based on chitosan and 1-butyl-3-methylimidazolium acetate

Green polymer electrolytes based on chitosan as the polymer matrix and ionic liquid 1-butyl-3-methylimidazolium acetate [Bmim][OAc] as charge carriers were prepared by solution casting technique. Complexes with various amount of ionic liquid loading were investigated as possible ionic conducting polymers. The ionic conductivity was found to increase with increasing weight percent of ionic liquid. The highest ionic conductivity of the charged chitosan-[Bmim][OAc] was 2.44 × 10{sup −3} S cm{sup −1} at 90 wt.% of [Bmim][OAc] content at ambient temperature. Attenuated Total Reflection Fourier Transform infrared (ATR-FTIR) spectroscopy has proven the interaction between chitosan and [Bmim][OAc]. X-ray Diffraction (XRD) has shown that the amorphosity of the complexes increase as the amount of [Bmim][OAc] increase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2015

Through-plane conductivities of membranes for nonaqueous redox flow batteries

In this study, nonaqueous redox flow batteries (RFB) leverage nonaqueous solvents to enable higher operating voltages compared to their aqueous counterparts. Most commercial components for flow batteries, however, are designed for aqueous use. One critical component, the ion-selective membrane, provides ionic conductance between electrodes while preventing crossover of electroactive species. Here we evaluate the area-specific conductances and through-plane conductivities of commercially available microporous separators (Celgard 2400, 2500) and anion exchange membranes (Neosepta AFX, Neosepta AHA, Fumasep FAP-450, Fumasep FAP-PK) soaked in acetonitrile, propylene carbonate, or two imidazolium-based ionic liquids. Fumasep membranes combined with acetonitrile-based electrolyte solutions provided the highest conductance values and conductivities by far. When tested in ionic liquids, all anion exchange membranes displayed conductivities greater than those of the Celgard microporous separators, though the separators’ decreased thickness-enabled conductances on par with the most conductive anion exchange membranes. Ionic conductivity is not the only consideration when choosing an anion exchange membrane; testing of FAP-450 and FAP-PK membranes in a nonaqueous RFB demonstrated that the increased mechanical stability of PEEK-supported FAP-PK minimized swelling, in turn decreasing solvent mediated crossover and enabling greater electrochemical yields (40% vs. 4%) and Coulombic efficiencies (94% vs. 90%) compared to the unsupported, higher conductance FAP-450.

25 ENERGY STORAGE↗

DOE OSTI2016

Process for recovering alkali metals and sulfur from alkali metal sulfides and polysulfides

Alkali metals and sulfur may be recovered from alkali monosulfide and polysulfides in an electrolytic process that utilizes an electrolytic cell having an alkali ion conductive membrane. An anolyte solution includes an alkali monosulfide, an alkali polysulfide, or a mixture thereof and a solvent that dissolves elemental sulfur. A catholyte includes molten alkali metal. Applying an electric current oxidizes sulfide and polysulfide in the anolyte compartment, causes alkali metal ions to pass through the alkali ion conductive membrane to the catholyte compartment, and reduces the alkali metal ions in the catholyte compartment. Liquid sulfur separates from the anolyte solution and may be recovered. The electrolytic cell is operated at a temperature where the formed alkali metal and sulfur are molten.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗