Search NASA⌕ Search

SEARCH · Search NASA

Results for “model integration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Optimal Membrane Cascade Design for Critical Mineral Recovery through Logic-based Superstructure Optimization

In this work, we extend the superstructure model proposed by Wamble et al. (2022) that considers feed input locations, recycling strategies, split fractions, stage numbers, and membrane area. We include the total number of stages as a decision variable, which might be particularly useful when there is cost as- sociated with adding additional stages. We propose a Generalized Disjunctive Programming (GDP) superstructure model that integrates all the design variables of the system. We also investigate the scalability of the model by varying the number of stages and the number of finite elements per stage to determine the impact on recovery and solution time.

Tran, Norman↗
DOE OSTI2023

Transmission and Distribution Real-Time Analysis Software for Monitoring and Control: Design and Simulation Testing

The US electric grid is facing operational, stability, and security challenges. Transmission system operators need some measure of visibility into distribution system renewable generation. Distribution system generation needs to support transmission system voltage. The grid is experiencing an expansion in measurement systems. How to take full advantage of this expansion and defend against attacks, both cyber and physical, poses additional challenges. This paper introduces software designed to meet these challenges. At the center of the software is an Integrated System Model (ISM) that spans from transmission to secondary distribution. The ISM is employed in real-time abnormality detection, voltage stability forecasting, and multi-mode control. The software architecture along with selected analysis modules is presented. Testing results are presented for: 1—attacks on utility infrastructure; 2—energy savings from optimal control; 3—distribution system control response during a low voltage transmission system event; 4—cyber-attacks on PV inverters, where physical inverters are used in hardware-in-the-simulation-loop studies. Contributions of this work include real-time analysis that spans from three-phase transmission through secondary distribution; an approach for detecting abnormalities that employs measurements from three independent measurement systems; and a multi-mode distribution system control that responds to cyber-attacks, physical attacks, equipment failures, and transmission system needs.

14 SOLAR ENERGY↗
DOE OSTI2022

Quantifying the regional stranded asset risks from new coal plants under 1.5 °C

Momentum to phase out unabated coal use is growing globally. This transition is critical to meeting the Paris climate goals but can potentially lead to large amounts of stranded assets, especially in regions with newer and growing coal fleets. Here we combine plant-level data with a global integrated assessment model to quantify changes in global stranded asset risks from coal-fired power plants across regions and over time. With new plant proposals, cancellations, and retirements over the past five years, global net committed emissions in 2030 from existing and planned coal plants declined by 3.3 GtCO 2 (25%). While these emissions are now roughly in line with initial Nationally Determined Contributions (NDCs) to the Paris Agreement, they remain far off track from longer-term climate goals. Progress made in 2021 towards no new coal can potentially avoid a 24% (503 GW) increase in capacity and a 55% ($520 billion) increase in stranded assets under 1.5 °C. Stranded asset risks fall disproportionately on emerging Asian economies with newer and growing coal fleets. Recent no new coal commitments from major coal financers can potentially reduce stranding of international investments by over 50%.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

The Role of Bedrock Circulation Depth and Porosity in Mountain Streamflow Response to Prolonged Drought

Quantitative understanding is lacking on how the depth of active groundwater circulation in bedrock affects mountain streamflow response to a multi-year drought. We use an integrated hydrological model to explore the sensitivity of a variety of streamflow metrics to bedrock circulation depth and porosity under a plausible extreme drought scenario lasting up to 5 years. Endmember depth versus hydraulic conductivity relationships and porosity values for fractured crystalline rock are simulated. With drought, a deeper circulation system with higher drainable porosity more effectively buffers minimum flow and significantly limits perennial stream loss in comparison to a shallow circulation system. Streamflow buffering is accomplished through extensive groundwater storage loss. However, deeper circulation systems experience prolonged recovery from drought in comparison to storage-limited shallow systems. Research highlights the importance of characterizing the deeper bedrock hydrogeology in mountainous watersheds to better understand and predict drought impacts on stream ecosystem health and water resource sustainability.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

State-by-state energy-water-land-health impacts of the US net-zero emissions goal

As decisionmakers at various scales begin to design strategies to implement the US net-zero goal, a holistic understanding of its broader economic and sustainability implications at subnational scales is important to shape public support and facilitate implementation. Here, we use an integrated assessment model to explore four different pathways toward the US net-zero goal and investigate their energy-water-land-health implications at the state level. In this study, we show that achieving the net-zero goal implies significant capital turnover (170–200 billion USD/year capital investment and 16–29 billion USD/year stranded assets in the power sector), reduced water withdrawal (120–210 km 3 /year), avoided air pollution damages (220–300 billion USD/year), and expanded forests (300–500 thousand km 2 ). However, the economic and sustainability implications of achieving the net-zero goal at the state-level may not be correlated to a state's contribution to national emission reductions. Our study lays the foundations for a deeper understanding of the broader implications of the US net-zero goal to facilitate cost-effective and environmentally sustainable transitions toward that goal.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Early retirement of power plants in climate mitigation scenarios

International efforts to avoid dangerous climate change aim for large and rapid reductions of fossil fuel CO 2 emissions worldwide, including nearly complete decarbonization of the electric power sector. However, achieving such rapid reductions may depend on early retirement of coal- and natural gas-fired power plants. Here, we analyze future fossil fuel electricity demand in 171 energy-emissions scenarios from Integrated Assessment Models (IAMs), evaluating the implicit retirements and/or reduced operation of generating infrastructure. Although IAMs calculate retirements endogenously, the structure and methods of each model differ; we use a standard approach to infer retirements in outputs from all six major IAMs and—unlike the IAMs themselves—we begin with the age distribution and region-specific operating capacities of the existing power fleet. We find that coal-fired power plants in scenarios consistent with international climate targets (i.e. keeping global warming well-below 2 °C or 1.5 °C) retire one to three decades earlier than historically has been the case. If plants are built to meet projected fossil electricity demand and instead allowed to operate at the level and over the lifetimes they have historically, the roughly 200 Gt CO 2 of additional emissions this century would be incompatible with keeping global warming well-below 2 °C. Thus, ambitious climate mitigation scenarios entail drastic, and perhaps un-appreciated, changes in the operating and/or retirement schedules of power infrastructure.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2020

Online Modelling and Optimization of Nonlinear Integrable Systems

Nonlinear integrable optics was recently proposed as a design approach to increase the limits on beam brightness and intensity imposed by fast collective instabilities. To study these systems experimentally, a new research electron and proton storage ring, the Integrable Optics Test Accelerator, was constructed and recently commissioned at Fermilab. Beam-based diagnostics and online modelling of nonlinear systems presents unique challenges - in this paper, we report on our efforts to develop optimization methods suited for such lattices. We explore the effectiveness of neural networks as fast online surrogate estimators, and integrate them into a beam-based tuning algorithm. We also develop a method of knob dimensionality reduction and subsequent robust multivariate optimization for maximizing key performance metrics under complicated lattice optics constraints.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Machine learning enabling high-throughput and remote operations at large-scale user facilities

Imaging, scattering, and spectroscopy are fundamental in understanding and discovering new functional materials. Contemporary innovations in automation and experimental techniques have led to these measurements being performed much faster and with higher resolution, thus producing vast amounts of data for analysis. These innovations are particularly pronounced at user facilities and synchrotron light sources. Machine learning (ML) methods are regularly developed to process and interpret large datasets in real-time with measurements. However, there remain conceptual barriers to entry for the facility general user community, whom often lack expertise in ML, and technical barriers for deploying ML models. Herein, we demonstrate a variety of archetypal ML models for on-the-fly analysis at multiple beamlines at the National Synchrotron Light Source II (NSLS-II). We describe these examples instructively, with a focus on integrating the models into existing experimental workflows, such that the reader can easily include their own ML techniques into experiments at NSLS-II or facilities with a common infrastructure. The framework presented here shows how with little effort, diverse ML models operate in conjunction with feedback loops via integration into the existing Bluesky Suite for experimental orchestration and data management.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Three different directions in which the European Union could replace Russian natural gas

Russia's invasion of Ukraine fuelled an energy crisis, which considerably impacted Europe given its heavy reliance on Russian natural gas imports. This study uses an ensemble of four global integrated assessment models, which are further soft-linked to two sectoral models, and explores the synergies and trade-offs among three approaches to living without Russian gas in Europe: (a) replacing with other gas imports, (b) boosting domestic energy production, and (c) reducing demand and accelerating energy efficiency. We find that substituting Russian gas from other trade partners would miss an opportunity to accelerate decarbonisation in end-use sectors while risking further fossil-fuel lock-ins, despite featuring the lowest gas price spikes and potentially reducing heating costs for end-users in the near term. Boosting domestic, primarily renewable, energy production on the other hand would instead require considerable investments, potentially burdening consumers. Energy demand reductions, however, could offer considerable space for further emissions cuts at the lowest power-sector investment costs; nonetheless, an energy efficiency-driven strategy would also risk relocation of energy-intensive industries, an aspect of increasing relevance to EU policymakers.

03 NATURAL GAS↗
DOE OSTI2022

ParFlow-CLM model simulation files for Maina et al., Journal of Hydrology, 2022

This dataset contains the files to run a ParFlow-CLM integrated hydrologic model simulation for Maina et al., HESS, 2022. It also contains the associated daily pressure output of those simulations. Simulations are for a hillslope-similarity approach based on seasonal groundwater changes in the East River, Colorado. Comparisons are made to different clustering, or functional zonation approaches. We assess the ability of these clustering approaches to identify and categorize hillslopes with similar static characteristics, hydroclimate, land surface processes, and subsurface dynamics in a mountainous watershed. ParFlow binary files (.pfb) are model specific, and can be modified/viewed with conversion to .sa, .silo, or .vtk file formats. ParFlow input scripts are in the .tcl file format. Associated post-processing scripts are included as .f90 files.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Towards Z-Next: The Integration of Theory, Experiments, and Computational Simulation in a Bayesian Data Assimilation Framework

Making reliable predictions in the presence of uncertainty is critical to high-consequence modeling and simulation activities, such as those encountered at Sandia National Laboratories. Surrogate or reduced-order models are often used to mitigate the expense of performing quality uncertainty analyses with high-fidelity, physics-based codes. However, phenomenological surrogate models do not always adhere to important physics and system properties. This project develops surrogate models that integrate physical theory with experimental data through a maximally-informative framework that accounts for the many uncertainties present in computational modeling problems. Correlations between relevant outputs are preserved through the use of multi-output or co-predictive surrogate models; known physical properties (specifically monotoncity) are also preserved; and unknown physics and phenomena are detected using a causal analysis. By endowing surrogate models with key properties of the physical system being studied, their predictive power is arguably enhanced, allowing for reliable simulations and analyses at a reduced computational cost.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

ELM2.1-XGBfire1.0: improving wildfire prediction by integrating a machine learning fire model in a land surface model

Wildfires have shown increasing trends in both frequency and severity across the contiguous United States (CONUS). However, process-based fire models have difficulties in accurately simulating the burned area over the CONUS due to a simplification of the physical process and cannot capture the interplay among fire, ignition, climate, and human activities. The deficiency of burned area simulation deteriorates the description of fire impact on energy balance, water budget, and carbon fluxes in the Earth system models (ESMs). Alternatively, fire models based on machine learning (ML), which capture statistical relationships between the burned area and environmental factors, have shown promising burned area predictions and corresponding fire impact simulation. We develop a hybrid framework (ELM2.1-XGBFire1.0) that integrates an eXtreme Gradient Boosting (XGBoost) wildfire model with the Energy Exascale Earth System Model (E3SM) land model (ELM) version 2.1. A Fortran–C–Python deep learning bridge is adapted to support online communication between ELM and the ML fire model. Specifically, the burned area predicted by the ML-based wildfire model is directly passed to ELM to adjust the carbon pool and vegetation dynamics after disturbance, which are then used as predictors in the ML-based fire model in the next time step. Evaluated against the historical burned area from Global Fire Emissions Database 5 from 2001–2019, the ELM2.1-XGBFire1.0 outperforms process-based fire models in terms of spatial distribution and seasonal variations. The ELM2.1-XGBFire1.0 has proven to be a new tool for studying vegetation–fire interactions and, more importantly, enables seamless exploration of climate–fire feedback, working as an active component of E3SM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Integrating Ultra-Coarse-Grained Protein Models into Accessible Workflows for Multiscale Molecular Dynamics

To capture protein conformational transitions using molecular dynamics (MD), several simulation resolutions covering different spatial and temporal scales are typically needed. All-atom (AA) simulations provide fine resolution, but are computationally infeasible for large systems over longer durations. Coarse-grained (CG) and ultra-coarse-grained (UCG) models have a lower resolution and computational cost while still being able to conserve essential protein features. Prior work on a Multiscale Machinelearned Modeling Infrastructure (MuMMI) combined both AA and CG simulations to study RAS-RAF protein interactions, leveraging CG models for longer time scales and using AA to investigate unusual conformations in greater detail. However, MuMMI is still resource-intensive, and this study aims to maximize exploration of the protein conformational space while reducing computational cost. In this paper, we build on prior work that integrates UCG models based on heterogeneous elastic network modeling (hENM) into the MuMMI workflow. We demonstrate that UCG models enable accurate sampling of protein conformations, focusing on simulating RAS-RAF protein interactions. Using higher-resolution CG Martini simulation data, we can automatically refine intramolecular interactions in UCG models. We present a scalable Python package that uses fluctuations observed in higher-resolution CG Martini simulations to estimate bond coefficients of the UCG model. We built novel machine learning-based backmapping methods to recover more detailed CG Martini structures from UCG structures, using diffusion models to learn the mapping between scales. Finally, we present UCG-mini-MuMMI, an accessible and less compute-intensive version of MuMMI as a resource for the scientific community. Incorporating UCG models into MD studies is applicable to a broad range of systems and proteins, and our study offers insights into the advantages and limitations of these methods.

Chemical structure↗
DOE OSTI2023

Modeling and Rapid Prototyping of Integrated Transmission-Distribution OPF Formulations with PowerModelsITD.jl

Conventional electric power systems are composed of different unidirectional power flow stages of generation, transmission, and distribution, managed independently by transmission system and distribution system operators. However, as distribution systems increase in complexity due to the integration of distributed energy resources, coordination between transmission and distribution networks will be imperative for the optimal operation of the power grid. However, coupling models and formulations between transmission and distribution is non-trivial, in particular due to the common practice of modeling transmission systems as single-phase, and distribution systems as multi-conductor phase-unbalanced. To enable the rapid prototyping of power flow formulations, in particular in the modeling of the boundary conditions between these two seemingly incompatible data models, we introduce PowerModelsITD.jl, a free, open-source toolkit written in Julia for integrated transmission-distribution (ITD) optimization that leverages mature optimization libraries from the InfrastructureModels.jl-ecosystem. The primary objective of the proposed framework is to provide baseline implementations of steady-state ITD optimization problems, while providing a common platform for the evaluation of emerging formulations and optimization problems. In this work, we introduce the nonlinear formulations currently supported in PowerModelsITD.jl, which include AC-polar, AC-rectangular, current-voltage, and a linear network transportation model. Results are validated using combinations of IEEE transmission and distribution networks.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Development of a wind turbine model and simulation platform using an acausal approach: Multiphysics modeling, validation, and control

This article presents the development of the Control-oriented, Reconfigurable, and Acausal Floating Turbine Simulator (CRAFTS). CRAFTS has a modular, hierarchical model architecture that enables rapid and accurate simulation of wind turbines. The architecture facilitates the incorporation of model variants, and its system reconfiguration features help simulate multiple design variants. CRAFTS also supports the integration of models developed on a causality-free platform (e.g., Modelica®) with existing causal models. This article focuses on the validation of a land-based wind turbine models against OpenFAST, an industry-standard platform, for several test cases. Closed-loop scenarios are also tested using the standard ROSCO controller and compared against OpenFAST. In addition, a nonlinear controller developed in our prior work is also evaluated. The test cases demonstrate the user-friendly and computationally efficient capabilities of CRAFTS to facilitate control co-design, assist in incorporating multiphysics models, be adaptable to design variants, and allow for rapid simulations to validate models and evaluate controllers.

17 WIND ENERGY↗
DOE OSTI2022

Multiscale modeling and nonlinear model predictive control for flue gas desulfurization

The primary source of sulfur dioxide (SO 2 ) emissions is flue gas from fossil fuels-based power plants. SO 2 emissions are known to not only cause health issues, but also have an adverse effect on the environment in various ways. Several Flue Gas Desulfurization (FGD) technologies have been incorporated in power plants. The most popular technology is Wet FGD, where a limestone slurry is used to absorb SO 2 from the flue gas. A detailed droplet scale model describing the instantaneous and finite rate chemistry is developed. The ill-posed Differential-Algebraic Equation (DAE) droplet model is reformulated to a well-posed index-1 DAE through index reduction. The droplet model is integrated with the bulk phase by incorporating gas-liquid mass transfer, and an oxidation reactor model to simulate the dynamic operation of the counter-current spray scrubber. As a result, the model has a well-conditioned Jacobian and overcomes the modeling challenges of previous works and enables numerical solution without requiring carefully selected initialization or specialized solution procedures. The model is successfully validated using power plant measurements, and nonlinear model predictive control (NMPC) studies are demonstrated to optimize recycle stream flowrates to minimize pumping costs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Predicting stress response and improved protein overproduction in Bacillus subtilis

Abstract Bacillus subtilis is a well-characterized microorganism and a model for the study of Gram-positive bacteria. The bacterium can produce proteins at high densities and yields, which has made it valuable for industrial bioproduction. Like other cell factories, metabolic modeling of B. subtilis has discovered ways to optimize its metabolism toward various applications. The first genome-scale metabolic model (M-model) of B. subtilis was published more than a decade ago and has been applied extensively to understand metabolism, to predict growth phenotypes, and served as a template to reconstruct models for other Gram-positive bacteria. However, M-models are ill-suited to simulate the production and secretion of proteins as well as their proteomic response to stress. Thus, a new generation of metabolic models, known as metabolism and gene expression models (ME-models), has been initiated. Here, we describe the reconstruction and validation of a ME model of B. subtilis , i JT964-ME. This model achieved higher performance scores on the prediction of gene essentiality as compared to the M-model. We successfully validated the model by integrating physiological and omics data associated with gene expression responses to ethanol and salt stress. The model further identified the mechanism by which tryptophan synthesis is upregulated under ethanol stress. Further, we employed i JT964-ME to predict amylase production rates under two different growth conditions. We analyzed these flux distributions and identified key metabolic pathways that permitted the increase in amylase production. Models like i JT964-ME enable the study of proteomic response to stress and the illustrate the potential for optimizing protein production in bacteria.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

eDNAjoint: An R package for interpreting paired or semi‐paired environmental DNA and traditional survey data in a Bayesian framework

Abstract Environmental DNA (eDNA) sampling is increasingly used in surveys of species distribution as a potentially sensitive and efficient monitoring method. Yet access to modelling tools designed specifically for interpreting this new data type lags behind its ubiquity. While occupancy modelling software has dominated the analytical landscape for eDNA data analysis of single species, this type of model may not always be the most appropriate. The rate of eDNA detection often corresponds to species density, rather than just occupancy, and researchers often have access to observations from non‐genetic sampling methods at the same sites. To provide users access to a modelling framework designed to maximize the use of all available data, we developed an R package, eDNAjoint . The package provides an easy‐to‐use interface for fitting a ‘joint’ model that integrates data from paired or semi‐paired eDNA and traditional surveys in a Bayesian framework. The model can be used to estimate parameters like the probability of a false positive eDNA detection and mean catch rate at a site, and the package allows access to multiple model variations and Bayesian prior customization. Additional functionality can be used for model selection, summarising posteriors and comparing the relative sensitivities of the two survey methods. We demonstrate the use of eDNAjoint by fitting a variation of the model with site‐level covariates that scale the sensitivity of eDNA sampling relative to traditional sampling. The example workflow uses binary eDNA and seine count data for the endangered tidewater goby ( Eucyclogobius newberryi ) from a study by Schmelzle and Kinziger (2016). This use case includes a prior sensitivity analysis and an evaluation of the relationship between detection rates and environmental variables. eDNAjoint has the potential to greatly increase the range of users who will be able to rigorously analyse eDNA and traditional survey data in a Bayesian framework, understand if and how eDNA can improve monitoring practices, and gain confidence in the interpretability of eDNA data.

Keller, Abigail G. [Department of Environment Scie↗