Search NASA⌕ Search

SEARCH · Search NASA

Results for “prediction methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Initial Evaluations of LoC Prediction Algorithms Using the NASA Vertical Motion Simulator

Flying near the edge of the safe operating envelope is an inherently unsafe proposition. Edge of the envelope here implies that small changes or disturbances in system state or system dynamics can take the system out of the safe envelope in a short time and could result in loss-of-control events. This study evaluated approaches to predicting loss-of-control safety margins as the aircraft gets closer to the edge of the safe operating envelope. The goal of the approach is to provide the pilot aural, visual, and tactile cues focused on maintaining the pilot's control action within predicted loss-of-control boundaries. Our predictive architecture combines quantitative loss-of-control boundaries, an adaptive prediction method to estimate in real-time Markov model parameters and associated stability margins, and a real-time data-based predictive control margins estimation algorithm. The combined architecture is applied to a nonlinear transport class aircraft. Evaluations of various feedback cues using both test and commercial pilots in the NASA Ames Vertical Motion-base Simulator (VMS) were conducted in the summer of 2013. The paper presents results of this evaluation focused on effectiveness of these approaches and the cues in preventing the pilots from entering a loss-of-control event.

Pilot Cue↗

Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations under Flexure Loads

An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and facesheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.

Damage↗

Failure Predictions of Out-of-Autoclave Sandwich Joints with Delaminations Under Flexure Loads

An analysis and a test program was conducted to investigate the damage tolerance of composite sandwich joints. The joints contained a single circular delamination between the face-sheet and the doubler. The coupons were fabricated through out-of-autoclave (OOA) processes, a technology NASA is investigating for joining large composite sections. The four-point bend flexure test was used to induce compression loading into the side of the joint where the delamination was placed. The compression side was chosen since it tends to be one of the most critical loads in launch vehicles. Autoclave cure was used to manufacture the composite sandwich sections, while the doubler was co-bonded onto the sandwich face-sheet using an OOA process after sandwich panels were cured. A building block approach was adopted to characterize the mechanical properties of the joint material, including the fracture toughness between the doubler and face-sheet. Twelve four-point-bend samples were tested, six in the sandwich core ribbon orientation and six in sandwich core cross-ribbon direction. Analysis predicted failure initiation and propagation at the pre-delaminated location, consistent with experimental observations. A building block approach using fracture analyses methods predicted failure loads in close agreement with tests. This investigation demonstrated a small strength reduction due to a flaw of significant size compared to the width of the sample. Therefore, concerns of bonding an OOA material to an in-autoclave material was mitigated for the geometries, materials, and load configurations considered.

Tolerance↗

Prediction of vortex shedding from forebodies with chines

An engineering prediction method to calculate vortex shedding from noncircular forebodies with sharp chine edges in subsonic flow at large incidence angles is presented. The forebody is represented by two- and three-dimensional singularities, and the lee side vortex wake is modeled by discrete vortices in crossflow planes along the body. The computational procedure is described, and comparisons of measured and predicted surface pressure distributions and predicted flow field vectors are presented to illustrate the method.

Mendenhall, Michael R.↗

SU-F-J-207: Non-Small Cell Lung Cancer Patient Survival Prediction with Quantitative Tumor Textures Analysis in Baseline CT

Purpose: Chemo-radiation therapy (CRT) is widely used in treating patients with locally advanced non-small cell lung cancer (NSCLC). Determination of the likelihood of patient response to treatment and optimization of treatment regime is of clinical significance. Up to date, no imaging biomarker has reliably correlated to NSCLC patient survival rate. This pilot study is to extract CT texture information from tumor regions for patient survival prediction. Methods: Thirteen patients with stage II-III NSCLC were treated using CRT with a median dose of 6210 cGy. Non-contrast-enhanced CT images were acquired for treatment planning and retrospectively collected for this study. Texture analysis was applied in segmented tumor regions using the Local Binary Pattern method (LBP). By comparing its HU with neighboring voxels, the LBPs of a voxel were measured in multiple scales with different group radiuses and numbers of neighbors. The LBP histograms formed a multi-dimensional texture vector for each patient, which was then used to establish and test a Support Vector Machine (SVM) model to predict patients’ one year survival. The leave-one-out cross validation strategy was used recursively to enlarge the training set and derive a reliable predictor. The predictions were compared with the true clinical outcomes. Results: A 10-dimensional LBP histogram was extracted from 3D segmented tumor region for each of the 13 patients. Using the SVM model with the leave-one-out strategy, only 1 out of 13 patients was misclassified. The experiments showed an accuracy of 93%, sensitivity of 100%, and specificity of 86%. Conclusion: Within the framework of a Support Vector Machine based model, the Local Binary Pattern method is able to extract a quantitative imaging biomarker in the prediction of NSCLC patient survival. More patients are to be included in the study.

60 APPLIED LIFE SCIENCES↗

Novel method for the prediction of an interface bonding species at alumina/metal interfaces

Interface bonding between alumina and various metals is discussed from the viewpoint of chemical thermodynamics. A method to predict the interface bonding species at an alumina/metal interface under equilibrium conditions is proposed by using the concept of chemical equilibrium for interface termination. The originality of this method is in the way a simple estimation of the interface binding energy, which is generally applicable to most metals, is developed. The effectiveness of this method is confirmed by careful examination of the experimental results. Comparison of the predicted and experimentally observed interface terminations reveals that the proposed method agrees well with the reported results. The method uses only basic quantities of pure elements and the formation enthalpy of oxides. Therefore, it can be applied to most metals in the periodic table and is useful for screening materials in the quest to develop interfaces with particular functions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Implicit-Explicit Multirate Infinitesimal GARK Methods

This work focuses on the development of a new class of high-order accurate methods for multirate time integration of systems of ordinary differential equations. Unlike other recent work in this area, the proposed methods support mixed implicit-explicit (IMEX) treatment of the slow time scale. In addition to allowing this slow time scale flexibility, the proposed methods utilize a so-called infinitesimal formulation for the fast time scale through definition of a sequence of modified “fast" initial-value problems that may be solved using any viable algorithm. We name the proposed class as implicit-explicit multirate infinitesimal generalized-structure additive Runge--Kutta (IMEX-MRI-GARK) methods. In addition to defining these methods, we prove that they may be viewed as specific instances of GARK methods and derive a set of order conditions on the IMEX-MRI-GARK coefficients to guarantee both third and fourth order accuracy for the overall multirate method. Additionally, we provide three specific IMEX-MRI-GARK methods, two of order three and one of order four. We conclude with numerical simulations on two multirate test problems, demonstrating the methods' predicted convergence rates and comparing their efficiency against both legacy IMEX multirate schemes and recent third and fourth order implicit MRI-GARK methods.

97 MATHEMATICS AND COMPUTING↗

The use of high-resolution terrain data in gravity field prediction

Different types of gravity prediction methods for local and regional gravity evaluation are developed, tested, and compared. Four different test areas were particularly selected in view of different prediction requirements. Also different parts of the spectrum of the gravity field were considered.

Groten, E.↗

Computational rotorcraft flowfield research at the U.S. Army AeroStructures Directorate

Rotorcraft aerodynamic interaction investigations conducted experimentally and computationally by the U.S. Army at the NASA Langley subsonic tunnel are described. Consideration is given to fuselage velocity computation, an interactional aerodynamics method, a rotor/wake/fuselage method, predicted wake geometry, views of tip vortex trajectory, and an inflow velocity study. Calculations were found to predict the periodic geometry of a rotor wake. Details of its interactions with the fuselage surface are not well modeled with inviscid panel methods. For the cases investigated in the present study, the overall effects of the fuselage are relatively small. However, increasing the size of the fuselage or decreasing the fuselage-rotor space will amplify these effects.

Berry, John D.↗

Frequency and Time Domain Nuclear-Electronic Orbital Equation-of-Motion Coupled Cluster Methods: Combination Bands and Electronic-Protonic Double Excitations

The accurate description of excited vibronic states is important for modeling a wide range of photoinduced processes. The nuclear-electronic orbital (NEO) approach, which treats specified protons on the same level as the electrons, can describe excited electronic-protonic states. Herein the multicomponent equation-of-motion coupled cluster with singles and doubles (NEO-EOM-CCSD) method and its time-domain counterpart, TD-NEO-EOM-CCSD, are developed and implemented. The application of these methods to the HCN molecule highlights their capabilities. These methods predict qualitatively reasonable energies and intensities for a combination band corresponding to simultaneous excitation of two vibrational modes, as well as an overtone. These methods also describe states with double excitation character, such as excited electronic-protonic states corresponding to the simultaneous excitation of an electron and a proton. The ability of the NEO-EOM-CCSD method and its time-dependent counterpart to describe combination bands, overtones, and double excitations will enable a wide range of photochemical applications.

Pavosevic, Fabijan↗

Prediction of O2 Dissociation Kinetics on LaMnO3-Based Cathode Materials for Solid Oxide Fuel Cells

First-principles and statistical-theory calculations were applied to examine the interactions between oxygen molecules and the (100) surfaces of LaMnO3 and La0.5Sr0.5MnO2.75, one of the most-used cathode materials in solid oxide fuel cells (SOFCs). To predict the rate constants for the interactions between O2 and LaMnO3 or La0.5Sr0.5MnO2.75, potential energy profiles were constructed using the nudged elastic band (NEB) method. Predicted rate constants for the dissociation of adsorbed oxygen species on LaMnO3 (lm) and La0.5Sr0.5MnO2.75 (lsm) can be expressed as kdiss,lm ) 2.35 × 1012 exp(-0.50 eV/RT) s-1 and kdiss,lsm ) 2.15 × 1012 exp(-0.23 eV/RT) s-1, respectively, in the temperature range of 873-1273 K at 1 atm. Because the activation energy for oxygen dissociation on La0.5Sr0.5MnO2.75 (0.23 eV) is much smaller than that on LaMnO3 (0.50 eV), oxygen vacancies greatly enhance O2 dissociation kinetics. The kinetic and mechanistic studies for the interactions at the molecular level are imperative to gaining a fundamental understanding of oxygen reduction kinetics on cathode materials and to providing important insight into the rational design of more catalytically active cathode materials for SOFCs.

30 DIRECT ENERGY CONVERSION↗

Inclusion of the treatment couch in portal dose image prediction for high precision EPID dosimetry

Purpose: When comparing predicted portal dose images (PDIs) to PDIs acquired by an EPID during treatment delivery, differences are often observed. These differences may be partially attributed to beam attenuation by parts of the treatment couch not taken into account in the PDI prediction. In order to improve the agreement, a model for the treatment couch was derived and included in the PDI prediction. Methods: A CT scan was used to model the couch top. The model for the couch top base was derived by iteratively matching the predicted and measured PDIs for gantry angles of 0 deg., 45 deg., and 90 deg. For PDI prediction, the modeled treatment couch was added to the CT scan of a patient or phantom by using the recorded couch positions from the record and verify system. To validate the couch model, PDI measurements were performed for a range of couch positions and gantry angles, both with and without an anatomical phantom in the beam. Results: After including the couch model in the PDI prediction for beams passing through the couch without phantom, the mean local dose differences between measured and predicted PDIs were reduced from up to 5.5% to less than 1.0% at each gantry angle. Similar results were obtained for measurements with a lung phantom on the couch. Although the couch model was originally derived by using a 6 MV photon beam, the results showed that it is also applicable for a 10 MV beam. Conclusions: A model of the treatment couch was derived and included in the PDI prediction, yielding a substantially improved agreement between measured and predicted PDIs, which makes interpretation of the observed deviations more straightforward.

60 APPLIED LIFE SCIENCES↗

Reliable and practical computational description of molecular crystal polymorphs

Reliable prediction of the polymorphic energy landscape of a molecular crystal would yield profound insight into drug development in terms of the existence and likelihood of late-appearing polymorphs. However, the computational prediction of molecular crystal polymorphs is highly challenging due to the high dimensionality of conformational and crystallographic space accompanied by the need for relative free energies to within 1 kJ/mol per molecule. In this study, we combine the most successful crystal structure sampling strategy with the most successful first-principles energy ranking strategy of the latest blind test of organic crystal structure prediction methods. Specifically, we present a hierarchical energy ranking approach intended for the refinement of relative stabilities in the final stage of a crystal structure prediction procedure. Such a combined approach provides excellent stability rankings for all studied systems and can be applied to molecular crystals of pharmaceutical importance.

36 MATERIALS SCIENCE↗

Lagrangian least-squares prediction of solar flux (F-bar 10.7)

The result of a study on the application of an improved statistical prediction method for estimating the intermediate-term (months) and long-term (years) behavior of solar flux is discussed. The study indicates that better predictions, in a chi square sense, are possible by selecting sets of the solar flux data such that each set (cycle) starts and ends at the maxima (or minima) for the data base and initialization point of the procedure. Then one applies a Lagrangian least-squares statistical technique. Evidence is also presented to support the existence of an aperiodic variation in the periods as well as the amplitudes.

Holland, R. L.↗

Predictions of LDEF radioactivity and comparison with measurements

As part of the program to utilize LDEF data for evaluation and improvement of current ionizing radiation environmental models and related predictive methods for future LEO missions, calculations have been carried out to compare with the induced radioactivity measured in metal samples placed on LDEF. The predicted activation is about a factor of two lower than observed, which is attributed to deficiencies in the AP8 trapped proton model. It is shown that this finding based on activation sample data is consistent with comparisons made with other LDEF activation and dose data. Plans for confirming these results utilizing additional LDEF data sets, and plans for model modifications to improve the agreement with LDEF data, are discussed.

Armstrong, T. W.↗

Impacts of Interannual Climate Variability on Agricultural and Marine Ecosystems

The El Nino - Southern Oscillation (ENSO) is the dominant mode of global interannual climate variability, and seems to be the only mode for which current prediction methods are more skillful than climatology or persistence. The Zebiak and Cane intermediate coupled ocean-atmosphere model has been in use for ENSO prediction for more than a decade, with notable success. However, the sole dependence of its original initialization scheme and the improved initialization on wind fields derived from merchant ship observations proved to be a liability during 1997/1998 El Nino event: the deficiencies of wind observations prevented the oceanic component of the model from reaching the realistic state during the year prior to the event, and the forecast failed. Our work on the project was concentrated on the use of satellite data for improving various stages of ENSO prediction technology: model initialization, bias correction, and data assimilation. Close collaboration with other teams of the IDS project was maintained throughout.

Cane, M. A.↗

Development of a Liner Design Methodology and Relevant Results of Acoustic Suppression in the Farfield for Mixer-Ejector Nozzles

We have developed a process to predict noise field interior to the ejector and in the farfield for any liner design for a mixer-ejector of arbitrary scale factor. However, a number of assumptions, not verified for the current application, utilized in this process, introduce uncertainties in the final result, especially, on a quantitative basis. The normal impedance model for bulk with perforated facesheet is based on homogeneous foam materials of low resistivity. The impact of flow conditions for HSCT application as well as the impact of perforated facesheet on predicted impedance is not properly accounted. Based on the measured normal impedance for deeper bulk samples (i.e., 2.0 in.) the predicted reactance is much higher compared to the data at frequencies above 2 kHz for T-foam and 200 ppi SiC. The resistance is under predicted at lower frequencies (below 4 kHz) for these samples. Thus, the use of such predicted data in acoustic suppression is likely to introduce inaccuracies. It should be noted that the impedance prediction methods developed recently under liner technology program are not utilized in the studies described in this report due to the program closeout. Acoustic suppression prediction is based on the uniform flow and temperature conditions in a two-sided treated constant area rectangular duct. In addition, assumptions of equal energy per mode noise field and interaction of all frequencies with the treated surface for the entire ejector length may not be accurate. While, the use of acoustic transfer factor minimizes the inaccuracies associated with the prediction for a known test case, the assumption of the same factor for other liner designs and with different linear scale factor ejectors seems to be very optimistic. As illustrated in appendix D that the predicted noise suppression for LSM-1 is lower compared to the measured data is an indication of the above argument. However, the process seems to be more reliable when used for the same scale models for different liner designs as demonstrated for Gen. 1 mixer-ejectors.

Salikuddin, M.↗