Search NASA⌕ Search

SEARCH · Search NASA

Results for “predictive distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Analytical methods to evaluate flux distributions from point-focus collectors for solar furnace and dish engine applications.

This paper introduces a new analytical 'stretch' function that accurately predicts the flux distribution from on-axis point-focus collectors. Different dish sizes and slope errors can be assessed using this analytical function with a ratio of the focal length to collector diameter fixed at 0.6 to yield the maximum concentration ratio. Results are compared to data, and the stretch function is shown to provide more accurate flux distributions than other analytical methods employing cone optics.

14 SOLAR ENERGY↗

Solving puzzles of GW150914 by primordial black holes

The black hole binary properties inferred from the LIGO gravitational wave signal GW150914 posed several serious problems. The high masses and low effective spin of black hole binary can be explained if they are primordial (PBH) rather than the products of the stellar binary evolution. Such PBH properties are postulated ad hoc but not derived from fundamental theory. We show that the necessary features of PBHs naturally follow from the slightly modified Affleck-Dine (AD) mechanism of baryogenesis. The log-normal distribution of PBHs, predicted within the AD paradigm, is adjusted to provide an abundant population of low-spin stellar mass black holes. The same distribution gives a sufficient number of quickly growing seeds of supermassive black holes observed at high redshifts and may comprise an appreciable fraction of Dark Matter which does not contradict any existing observational limits. Testable predictions of this scenario are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

Predicting the effect of angular momentum on the dissociation dynamics of highly rotationally excited radical intermediates

We present a model which accurately predicts the net speed distributions of products resulting from the unimolecular decomposition of rotationally excited radicals. The radicals are produced photolytically from a halogenated precursor under collision-free conditions so they are not in a thermal distribution of rotational states. The accuracy relies on the radical dissociating with negligible energetic barrier beyond the endoergicity. We test the model predictions using previous velocity map imaging and crossed laser-molecular beam scattering experiments that photolytically generated rotationally excited CD{sub 2}CD{sub 2}OH and C{sub 3}H{sub 6}OH radicals from brominated precursors; some of those radicals then undergo further dissociation to CD{sub 2}CD{sub 2} + OH and C{sub 3}H{sub 6} + OH, respectively. We model the rotational trajectories of these radicals, with high vibrational and rotational energy, first near their equilibrium geometry, and then by projecting each point during the rotation to the transition state (continuing the rotational dynamics at that geometry). This allows us to accurately predict the recoil velocity imparted in the subsequent dissociation of the radical by calculating the tangential velocities of the CD{sub 2}CD{sub 2}/C{sub 3}H{sub 6} and OH fragments at the transition state. The model also gives a prediction for the distribution of angles between the dissociation fragments’ velocity vectors and the initial radical’s velocity vector. These results are used to generate fits to the previously measured time-of-flight distributions of the dissociation fragments; the fits are excellent. The results demonstrate the importance of considering the precession of the angular velocity vector for a rotating radical. We also show that if the initial angular momentum of the rotating radical lies nearly parallel to a principal axis, the very narrow range of tangential velocities predicted by this model must be convoluted with a J = 0 recoil velocity distribution to achieve a good result. The model relies on measuring the kinetic energy release when the halogenated precursor is photodissociated via a repulsive excited state but does not include any adjustable parameters. Even when different conformers of the photolytic precursor are populated, weighting the prediction by a thermal conformer population gives an accurate prediction for the relative velocity vectors of the fragments from the highly rotationally excited radical intermediates.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Subarctic atmospheric aerosol composition: 3. Measured and modeled properties of cloud condensation nuclei

Predicting the ability of aerosol particles to act as cloud condensation nuclei (CCN) is still a challenge and not properly incorporated in current climate models. By using field data from measurements at the sub-arctic Stordalen site, approximately 200 km north of the Arctic Circle, a hygroscopicity closure study was performed. Measured CCN number concentrations were compared with predictions that involved size distribution data and hygroscopicity data measured by a HTDMA as a proxy for the chemical composition of the aerosol. The sensitivity of the predictions to simplifying assumptions re-garding mixing state of the particles and the temporal variability of the chemical composition were explored. It was found that involving the full growth factor probability density function (GF-PDF) or the averaged growth factor (GF) or a constant averaged κ-value resulted in reasonable agreement be-tween predicted and measured CCN number concentrations. Probability distribution histograms of the performances of the different closure approaches revealed that involving the full GF-PDF resulted in the narrowest and most symmetric distribution of the predicted-to-measured CCN number concentra-tion ratio around unity. While also involving the averaged GF showed a good agreement, the constant averaged κ-value-approach resulted in most of the cases in an overestimation of CCN number con-centrations by ~15 %. Approaches where a constant estimated hygroscopicity was involved predicted CCN number concentrations in some cases well but largely overestimated (assuming internally mixed ammonium sulphate particles) or underestimated (assuming internally mixed organic aerosol particles with κ = 0.1) CCN number concentrations. It is therefore recommended that at least an averaged measured proxy for the aerosol’s chemical composition be incorporated in future CCN predictions and climate models.

54 ENVIRONMENTAL SCIENCES↗

Observation of Current-Driven Features of 2.5 Mev Ion Bunch With Complete and Efficient 5D Measurements at the SNS Beam Test Facility

The SNS Beam Test Facility research program is focused detailed studies of beam distributions for medium-energy ion beams, with the goal of reconstructing realistic 6D bunch distributions to enable halo prediction. For complete characterization of the initial distribution, scan time scales exponentially with scan dimension. Currently, a full 6D measurement with ~10 points across most dimensions requires 30 hours. However, measurement of the 5D distribution f(x, x’,y,y’,w) can be done very rapidly using a hybrid slit/screen method. This approach requires ~4 hours to obtain at least 32 points/dimension, with very high resolution (0.5 keV) in the energy distribution. This presentation reports on the approach and results for 5D characterization of the initial RFQ-formed bunch. This includes higher-resolution views of previously reported transverse-longitudinal dependence and additional interplane dependencies that were not previously reported.

Ruisard, Kiersten↗

Color fluctuation approximation for multiple interactions in leading twist theory of nuclear shadowing

The leading twist theory of nuclear shadowing predicts nuclear parton distributions in the small $x$ shadowing region by connecting them to the leading twist hard diffraction in electron-nucleon scattering. The uncertainties of the predictions are related to the shadowing effects resulting from the interaction of the hard probe with $N \ge 3$ nucleons. We argue that the pattern of hard diffraction observed at HERA allows one to reduce these uncertainties, and we develop a new approach to the treatment of these multiple collisions. It is based on the concept of the color fluctuations and accounts for the presence of both point-like and hadron-like configurations in the virtual photon. Using the developed framework, we update our predictions for the effect of the leading twist nuclear shadowing in nuclear parton distributions of heavy nuclei at small $x$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cluster infall for mass calibration in the stage-IV era

The outskirts of galaxy clusters present a promising avenue for constraining cluster masses in a way that is robust to the impact of baryonic physics. We assess the accuracy to which the cluster infall regions can be used for cluster mass calibration. Building on previous work, we parametrize the velocity distribution 𝑃⁡(𝑣r,𝑣tan|𝑟,𝑀) of dark matter halos on scales 𝑟 ≥ 5⁢ℎ −1 Mpc as the product of the marginalized distribution 𝑃⁡(𝑣 r |𝑟,𝑀) and the conditional distribution 𝑃⁡(𝑣 tan |𝑣 r ,𝑟,𝑀), calibrating the radial and mass dependence of these distributions in numerical simulations. We then project our model along the line of sight to obtain accurate predictions for the distributions of line-of-sight velocities at a given projected radius and cluster mass 𝑃⁡(𝑣 LOS |𝑅,𝑀), which we can observe with spectroscopic survey data. Furthermore, with our model, we forecast that spectra from the Dark Energy Spectroscopic Instrument can constrain cluster masses with subpercent-level precision, comparable to that of stage-IV weak lensing surveys.

79 ASTRONOMY AND ASTROPHYSICS↗

Multiscale Modeling of Nanoparticle Precipitation in Oxide Dispersion-Strengthened Steels Produced by Laser Powder Bed Fusion

Laser Powder Bed Fusion (LPBF) enables the efficient production of near-net-shape oxide dispersion-strengthened (ODS) alloys, which possess superior mechanical properties due to oxide nanoparticles (e.g., yttrium oxide, Y-O, and yttrium-titanium oxide, Y-Ti-O) embedded in the alloy matrix. To better understand the precipitation mechanisms of the oxide nanoparticles and predict their size distribution under LPBF conditions, we developed an innovative physics-based multiscale modeling strategy that incorporates multiple computational approaches. These include a finite volume method model (Flow3D) to analyze the temperature field and cooling rate of the melt pool during the LPBF process, a density functional theory model to calculate the binding energy of Y-O particles and the temperature-dependent diffusivities of Y and O in molten 316L stainless steel (SS), and a cluster dynamics model to evaluate the kinetic evolution and size distribution of Y-O nanoparticles in as-fabricated 316L SS ODS alloys. The model-predicted particle sizes exhibit good agreement with experimental measurements across various LPBF process parameters, i.e., laser power (110–220 W) and scanning speed (150–900 mm/s), demonstrating the reliability and predictive power of the modeling approach. The multiscale approach can be used to guide the future design of experimental process parameters to control oxide nanoparticle characteristics in LPBF-manufactured ODS alloys. Additionally, our approach introduces a novel strategy for understanding and modeling the thermodynamics and kinetics of precipitation in high-temperature systems, particularly molten alloys.

Wang, Zhengming (ORCID:0000000241627112)↗

Small rocket exhaust plume data

During recent cryodeposit tests with an 0.18-N thruster, the mass flux in the plume back field was measured for the first time for nitrogen, carbon dioxide, and a mixture of nitrogen, hydrogen, and ammonia at various inlet pressures. This mixture simulated gases that would be generated by a hydrazine plenum attitude propulsion system. The measurements furnish a base upon which to build a mathematical model of plume back flow that will be used in predicting the mass distribution in the boundary region of other plumes. The results are analyzed and compared with existing analytical predictions.

Chirivella, J. E.↗

Airfoil Pressure Distribution Investigation in the Variable Density Wind Tunnel

Report presents the results of wind tunnel tests of pressure distribution measurements over one section each of six airfoils. Pressure distribution diagrams, as well as the integrated characteristics of the airfoils, are given for both a high and a low dynamic scale or, Reynolds number VL/V, for comparison with flight and other wind-tunnel tests, respectively. It is concluded that the scale effect is very important only at angles of attack near the burble. The distribution of pressure over an airfoil having a Joukowski section is compared with the theoretically derived distribution. A further study of the distribution of pressure over all of the airfoils resulted in the development of an approximate method of predicting the pressure distribution along the chord of any normal airfoil for all attitudes within the working range if the distribution at one attitude is known.

Jacobs, Eastman N↗

Multidimensional Distributional Neural Network Output Demonstrated in Super‐Resolution of Surface Wind Speed

Accurate quantification of uncertainty in neural network predictions remains a central challenge for scientific applications involving high-dimensional, correlated data. While existing methods capture either aleatoric or epistemic uncertainty, few offer closed-form, multidimensional distributions that preserve spatial correlation while remaining computationally tractable. In this work, we present a framework for training neural networks with a multidimensional Gaussian loss, generating a closed-form predictive distribution over outputs informed by non-identically distributed training data. Our approach captures aleatoric uncertainty by iteratively estimating the means and covariance matrices, and is demonstrated on a super-resolution example out-of-training-sample. We leverage a Fourier representation of the covariance matrix to stabilize network training and preserve spatial correlation. We introduce a novel regularization strategy—referred to as information sharing—that interpolates between image-specific and global covariance estimates, enabling convergence of the super-resolution downscaling network trained on image-specific distributional loss functions. This framework allows for efficient sampling, explicit correlation modeling, and extensions to more complex distribution families all without disrupting prediction performance. We demonstrate the method on a surface wind speed downscaling task and discuss its broader applicability to uncertainty-aware prediction in scientific models.

17 WIND ENERGY↗

Energy Prediction of the Chicago Metropolitan Area Using Distributed Transportation MBSE Framework

Energy consumption impact of vehicle powertrain is traditionally assessed using standard and regulatory drive cycles. In this paper, energy consumption is determined by studying all the trips occurring in the Chicago Metropolitan Area in a 24 hour period. The data is generated by combining Polaris, an agent based traffic flow model with SVTrip, a stochastic model that generates 1 Hz vehicle speed profiles and Autonomie, a detailed vehicle level modeling tool used to predict fuel consumption. Different scenarios are constructed to define trips for different timeframes and assumptions. Vehicle fleet distribution, vehicle technologies and automation levels are applied to represent an appropriate vehicle fleet for each scenario. Analysis of energy consumption is then discussed with a particular emphasis on the impact of powertrain technology and vehicle types.

Autonomie↗

Highly Selective Condensation of Biomass-Derived Methyl Ketones as a Source of Aviation Fuel

Aviation fuel (i.e., jet fuel) requires a mixture of C 9 -C 16 hydrocarbons having both a high energy density and a low freezing point. While jet fuel is currently produced from petroleum, increasing concern with the release of CO 2 into the atmosphere from the combustion of petroleum-based fuels has led to policy changes mandating the inclusion of biomass-based fuels into the fuel pool. Here we report a novel way to produce a mixture of branched cyclohexane derivatives in very high yield (>94 %) that match or exceed many required properties of jet fuel. As starting materials, we use a mixture of n -alkyl methyl ketones and their derivatives obtained from biomass. Here, these synthons are condensed into trimers via base-catalyzed aldol condensation and Michael addition. Hydrodeoxygenation of these products yields mixtures of C 12 -C 21 branched, cyclic alkanes. Using models for predicting the carbon number distribution obtained from a mixture of n-alkyl methyl ketones and for predicting the boiling point distribution of the final mixture of cyclic alkanes, we show that it is possible to define the mixture of synthons that will closely reproduce the distillation curve of traditional jet fuel.

biofuels↗

THE STATISTICAL MECHANICS OF PLANET ORBITS

The final “giant-impact” phase of terrestrial planet formation is believed to begin with a large number of planetary “embryos” on nearly circular, coplanar orbits. Mutual gravitational interactions gradually excite their eccentricities until their orbits cross and they collide and merge; through this process the number of surviving bodies declines until the system contains a small number of planets on well-separated, stable orbits. In this paper we explore a simple statistical model for the orbit distribution of planets formed by this process, based on the sheared-sheet approximation and the ansatz that the planets explore uniformly all of the stable region of phase space. The model provides analytic predictions for the distribution of eccentricities and semimajor axis differences, correlations between orbital elements of nearby planets, and the complete N-planet distribution function, in terms of a single parameter, the “dynamical temperature,” that is determined by the planetary masses. The predicted properties are generally consistent with N-body simulations of the giant-impact phase and with the distribution of semimajor axis differences in the Kepler catalog of extrasolar planets. A similar model may apply to the orbits of giant planets if these orbits are determined mainly by dynamical evolution after the planets have formed and the gas disk has disappeared.

79 ASTRONOMY AND ASTROPHYSICS↗

Neutron tomography of axially symmetric objects using 14 MeV neutrons from a portable neutron generator

In nuclear boiling water reactor cores, the distribution of water and steam (void) is essential for both safety and efficiency reasons. In order to enhance predictive capabilities, void distribution assessment is performed in two-phase test-loops under reactor-relevant conditions. This article proposes the novel technique of fast-neutron tomography using a portable deuterium-tritium neutron generator to determine the time-averaged void distribution in these loops. Fast neutrons have the advantage of high transmission through the metallic structures and pipes typically concealing a thermal-hydraulic test loop, while still being fairly sensitive to the water/void content. However, commercially available fast-neutron generators also have the disadvantage of a relatively low yield and fast-neutron detection also suffers from relatively low detection efficiency. Fortunately, some loops are axially symmetric, a property which can be exploited to reduce the amount of data needed for tomographic measurement, thus limiting the interrogation time needed. In this article, three axially symmetric test objects depicting a thermal-hydraulic test loop have been examined; steel pipes with outer diameter 24 mm, thickness 1.5 mm, and with three different distributions of the plastic material POM inside the pipes. Data recorded with the FANTOM fast-neutron tomography instrument have been used to perform tomographic reconstructions to assess their radial material distribution. Here, a dedicated tomographic algorithm that exploits the symmetry of these objects has been applied, which is described in the paper. Results are demonstrated in 20 rixel (radial pixel) reconstructions of the interior constitution and 2D visualization of the pipe interior is demonstrated. The local POM attenuation coefficients in the rixels were measured with errors (RMS) of 0.025, 0.020, and 0.022 cm{sup −1}, solid POM attenuation coefficient. The accuracy and precision is high enough to provide a useful indication on the flow mode, and a visualization of the radial material distribution can be obtained. A benefit of this system is its potential to be mounted at any axial height of a two-phase test section without requirements for pre-fabricated entrances or windows. This could mean a significant increase in flexibility of the void distribution assessment capability at many existing two-phase test loops.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Non-extensive statistics to the cosmological lithium problem

Big Bang nucleosynthesis (BBN) theory predicts the abundances of the light elements D, 3 He, 4 He, and 7 Li produced in the early universe. The primordial abundances of D and 4 He inferred from observational data are in good agreement with predictions, however, BBN theory overestimates the primordial 7 Li abundance by about a factor of three. This is the so-called "cosmological lithium problem." Solutions to this problem using conventional astrophysics and nuclear physics have not been successful over the past few decades, probably indicating the presence of new physics during the era of BBN. We have investigated the impact on BBN predictions of adopting a generalized distribution to describe the velocities of nucleons in the framework of Tsallis non-extensive statistics. This generalized velocity distribution is characterized by a parameter q, and reduces to the usually assumed Maxwell–Boltzmann distribution for q = 1. We find excellent agreement between predicted and observed primordial abundances of D, 4 He, and 7 Li for 1.069 ≤ q ≤ 1.082, suggesting a possible new solution to the cosmological lithium problem.

79 ASTRONOMY AND ASTROPHYSICS↗

Report of the mid- and low-latitude E and F Region Working Group

The formation and variation of the ionosphere is addressed with regard to the ability to understand, specify, and predict the low and mid latitude E and F regions. A brief survey of prediction methods and techniques is given for long and short term variability in the E and F regions. It is indicated that the usefulness of theoretical models to predict electron density distribution in the low and mid latitude ionospheric E and F regions is limited by the ability to predict the parameters which enter the relevant equations; i.e., neutral atmospheric constituents, neutral and charged particle temperatures, neutral wind, electric fields, and ionizing sources such as solar (E sub uv) radiation and energetic particles. It is recommended that areas for research include improving knowledge of the input parameters and how they respond to changing solar and geophysical conditions.

Rush, C. M.↗

On the relationship between optically selected and X-ray-selected active galactic nuclei

Available information on the optically selected active galactic nuclei (AGNs) (luminosity function, cosmological evolution, etc.), together with the knowledge of their X-ray to optical luminosity ratio, are used to predict the overall properties of X-ray-selected active galactic nuclei (number counts, evolution, luminosity and redshift distributions, etc.). The predicted properties are then compared with those observed. Similarly, predictions are carried out for the optical properties of the X-ray-selected AGN parent population. In the search for a possibility explanation for discrepancies, preliminary results are reported.

Franceschini, A.↗