Search NASA⌕ Search

SEARCH · Search NASA

Results for “remote data collection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Remote-sensing and radiosonde datasets collected in the San Luis Valley during the LAPSE-RATE campaign

Abstract. In July 2018, the International Society for Atmospheric Research using Remotely piloted Aircraft (ISARRA) hosted a flight week to showcase the role remotely piloted aircraft systems (RPASs) can have in filling the atmospheric data gap. This campaign was called Lower Atmospheric Process Studies at Elevation – a Remotely-piloted Aircraft Team Experiment (LAPSE-RATE). In support of this campaign, ground-based remote and in situ systems were also deployed for the campaign. The University of Oklahoma deployed the Collaborative Lower Atmospheric Mobile Profiling System (CLAMPS), the University of Colorado deployed two Doppler wind lidars, and the National Severe Storms Laboratory deployed a mobile mesonet with the ability to launch radiosondes. This paper focuses on the data products from these instruments that result in profiles of the atmospheric state. The data are publicly available in the Zenodo LAPSE-RATE community portal (https://zenodo.org/communities/lapse-rate/, 19 January 2021). The profile data discussed are available at https://doi.org/10.5281/zenodo.3780623 (Bell and Klein, 2020), https://doi.org/10.5281/zenodo.3780593 (Bell et al., 2020b), https://doi.org/10.5281/zenodo.3727224 (Bell et al., 2020a), https://doi.org/10.5281/zenodo.3738175 (Waugh, 2020b), https://doi.org/10.5281/zenodo.3720444 (Waugh, 2020a), and https://doi.org/10.5281/zenodo.3698228 (Lundquist et al., 2020).

54 ENVIRONMENTAL SCIENCES↗

Aircraft Based Remotely Sensed Albedo and Surface Temperatures for Three US Cities

High spatial resolution thermal infrared and visible data obtained from aircraft were used to measure, map, and model the surface energy budget characteristics of surfaces typical of the urban landscape for three US cities. Aircraft data collected from the Advanced Thermal and Land Applications Sensor (ATLAS) scanner allowed a detail analysis of the city, determining its surface thermal and visible reflectance properties. These data are critical in providing data that can be used to evaluate the overall "fabric" of the cities in relation to the urban heat island and air quality modeling.

Luvall, Jeffrey C.↗

How High to Fly? Mapping Evapotranspiration from Remotely Piloted Aircrafts at Different Elevations

Recent advancements in remotely piloted aircrafts (RPAs) have made frequent, low-flying imagery collection more economical and feasible than ever before. The goal of this work was to create, compare, and quantify uncertainty associated with evapotranspiration (ET) maps generated from different conditions and image capture elevations. We collected optical and thermal data from a commercially irrigated potato (Solanum tuberosum) field in the Wisconsin Central Sands using a quadcopter RPA system and combined multispectral/thermal camera. We conducted eight mission sets (24 total missions) during the 2019 growing season. Each mission set included flights at 90, 60, and 30 m above ground level. Ground reference measurements of surface temperature and soil moisture were collected throughout the domain within 15 min of each RPA mission set. Evapotranspiration values were modeled from the flight data using the High-Resolution Mapping of Evapotranspiration (HRMET) model. We compared HRMET-derived ET estimates to an Eddy Covariance system within the flight domain. Additionally, we assessed uncertainty for each flight using a Monte Carlo approach. Results indicate that the primary source of uncertainty in ET estimates was the optical and thermal data. Despite some additional detectable features at low elevation, we conclude that the tradeoff in resources and computation does not currently justify low elevation flights for annual vegetable crop management in the Midwest USA.

54 ENVIRONMENTAL SCIENCES↗

Bounds on Optimal Revisit Times in Persistent Monitoring Missions With a Distinct and Remote Service Station</strong

We report persistent monitoring missions require an up-to-date knowledge of the changing state of the underlying environment. Unmannned aerial vehicles (UAVs) can be gainfully employed to continually visit a set of targets representing tasks (and locations) in the environment and collect data therein for long time periods. The enduring nature of these missions requires the UAV to be regularly recharged at a service station. In this article, we consider the case in which the service station is not colocated with any of the targets. An efficient monitoring requires the revisit time, defined as the maximum of the time elapsed between successive revisits to targets, to be minimized. Here, we consider the problem of determining UAV routes that lead to the minimum revisit time. The problem is NP-hard, and its computational difficulty increases with the fuel capacity of the UAV. We develop an algorithm to construct near-optimal solutions to the problem quickly when the fuel capacity exceeds a threshold. We also develop lower bounds to the optimal revisit time and use these bounds to demonstrate (through numerical simulations) that the constructed solutions are, on an average, at most 0.01% away from the optimum.

42 ENGINEERING↗

Remote measurement of chlorophyll concentration and secchi-depth using the principal components of the ocean's color spectrum

Statistical results and conclusions are presented, based on direct comparisons of the ocean's color and chlorophyll concentration. The ocean color and ground truth data for this analysis were collected during Mission 140 of NASA's NP3A earth resources aircraft over the period from 6 through 14 August 1970. During this experiment, chlorophyll and light attenuation data were collected. All sets of comparative observations are simultaneous in the sense that the ship began sampling when the aircraft came overhead.

Mueller, J. L.↗

A Thorium-rich Mare Basalt Rock Fragment from the Apollo 12 Regolith: A Sample from a Young Procellarum Flow?

In this abstract, we report on the composition, mineralogy and petrography of a basaltic rock fragment, 12032,366-18, found in the Apollo 12 regolith. Age data, collected as part of an investigation by Barra et al., will be presented in detail in. Here, only the age dating result is summarized. This rock fragment garnered our attention because it is significantly enriched in incompatible elements, e.g., 7 ppm thorium, compared to other known lunar basalts. Its mineral- and trace-element chemistry set it apart from other Apollo 12 basalts and indeed from all Apollo and Luna basalts. What makes it potentially very significant is the possibility that it is a sample of a relatively young, thorium-rich basalt flow similar to those inferred to occur in the Procellarum region, especially northwestern Procellarum, on the basis of Lunar Prospector orbital data. Exploiting the lunar regolith for the diversity of rock types that have been delivered to a landing site by impact processes and correlating them to their likely site of origin using remote sensing will be an important part of future missions to the Moon. One such mission is Moonrise, which would collect regolith samples from the South Pole-Aitken Basin, concentrating thousands of rock fragments of 3-20 mm size from the regolith, and returning the samples to Earth.

Jolliff, B. L.↗

Moving NASA Remote Sensing Data to the GIS Environment for Health Studies

There has been an increasing demand by the health community for improved data on many different environmental factors relevant to the links between the environment and disease occurrence and transmission. These data are important for GIS-based monitoring, risk mapping, and surveillance of epidemiological parameters on a large number of different spatial, temporal, and spectral resolutions. Accordingly, NASA is developing new approaches to data collection and distribution in order to improve access to multiple sources of data streams to increase spatial and temporal coverage. Methods are being developed to incorporate different, scalable capabilities to handle multiple data sources by adding, deleting and replacing components as required as well as associated tools for their management. An approach has been to search for innovative solutions focused on the creation, use and manipulation of data stored in many different archives. These include data transformation and combination as well as data and information tools that can assist the public health and science community to use existing and anticipated products in new and flexible ways. This presentation will provide an inventory of geophysical parameters derived from satellite remote sensing sensors that are useful for GIS-based public health studies. The presentation will also discuss the physical and scientific limitations of access to and use of these data for health applications such as resolution and format differences, lack of software interoperability, data access problems. Finally, there will be a summary of the recent steps the NASA program has taken to bring NASA-generated satellite products to a wider range of users in the GIS community.

Vicente, Gilberto A.↗

Monitoring the inundation extent of the Florida Everglades with AVHRR data in a geographic information system

The purpose of the study is to develop a geographical information system capable of estimating methane and other greenhouse trace-gas fluxes from the wetlands of the Florida Everglades. Advanced very-high-resolution radiometer (AVHRR) data collected on a near-monthly basis for a year in order to monitor the seasonal dynamics of inundation extent across the Everglades is utilized in the analysis. It is noted that AVHRR data presents advantages over other remote-sensing data sources employed in covering large geographical regions due to its daily coverage with multiple opportunities during a day. This temporal resolution allows the realistic expectation of acquiring data on a frequent basis.

Pelletier, R. E.↗

Parallel NPARC: Implementation and Performance

Version 3 of the NPARC Navier-Stokes code includes support for large-grain (block level) parallelism using explicit message passing between a heterogeneous collection of computers. This capability has the potential for significant performance gains, depending upon the block data distribution. The parallel implementation uses a master/worker arrangement of processes. The master process assigns blocks to workers, controls worker actions, and provides remote file access for the workers. The processes communicate via explicit message passing using an interface library which provides portability to a number of message passing libraries, such as PVM (Parallel Virtual Machine). A Bourne shell script is used to simplify the task of selecting hosts, starting processes, retrieving remote files, and terminating a computation. This script also provides a simple form of fault tolerance. An analysis of the computational performance of NPARC is presented, using data sets from an F/A-18 inlet study and a Rocket Based Combined Cycle Engine analysis. Parallel speedup and overall computational efficiency were obtained for various NPARC run parameters on a cluster of IBM RS6000 workstations. The data show that although NPARC performance compares favorably with the estimated potential parallelism, typical data sets used with previous versions of NPARC will often need to be reblocked for optimum parallel performance. In one of the cases studied, reblocking increased peak parallel speedup from 3.2 to 11.8.

Townsend, S. E.↗

Convective Bursts and Hot Towers Observed During CAMEX-3 and CAMEX-4

The role of convective bursts in the inner core regions of tropical storms has been if interest for many years with respect to their role in intensification. The structure of these convective bursts is best observed in satellite observations, but their structure has also been observed in some of the airborne radar studies over the past decade. Recently, a convective burst was documented during Hurricane Bonnie during NASA's Convection and Moisure Experiment-3 (CAMEX-3, 1998) conducted jointly with NOAA's Hurricane Field Program (Heymsfield et al., 2001). CAMEX-3 involved the NASA ER-2 high-altitude and DC-8 medium altitude aircraft instrumented with a variety of remote sensing instruments. The Bonnie convective burst was suggested to contribute intensification if ots warm core vased on radar measurements provided by the ER-2 Doppler Radar (EDOP). During the 2001 hurricane season, data sets form additional storms were collected during CAMEX-4. This paper documents the internal structure of convective bursts observed by EDOP and supporting measurements during foour storms (Bonnie, 1998; Georges, 1998; Chantal, 2001; Humberto, 2001) with respect to draft intensities, height profiles of reflectivity, location with respect to the storm center, occurence relative to the sotrm evolutjion, and upper level outlflows associated with the burst. These cases will be presented in the poster and will be compared with Bonnie's convective burst whic was associated with a strong subsiding current which appeared to contribute to the storm intensification. For one of the sotrms (Chantal), a very intense convective burst was nearly 100 km east of the low level circulation center and thus was infavorably located for intensifying the storm.

Heymsfield, Gerald↗

Capabilities and Limitations of Infrared Reflectance Microspectroscopy

Technological improvements in IR microspectroscopy have made it an increasingly appealing tool for planetary mineralogy. Microspectroscopy presents the prospect of examining small samples nondestructively and acquiring spectra that can be related to remote sensing observations. However, complications are introduced as a target beam size is reduced, and it is critical that limitations are understood. We present the results of a series of well constrained spectroscopic measurements, linking microspectroscopic data to traditionally collected reflectance spectra and petrologic information for the same rock.

Klima, R. L.↗

International Space Station Future Correlation Analysis Improvements

Ongoing modal analyses and model correlation are performed on different configurations of the International Space Station (ISS). These analyses utilize on-orbit dynamic measurements collected using four main ISS instrumentation systems: External Wireless Instrumentation System (EWIS), Internal Wireless Instrumentation System (IWIS), Space Acceleration Measurement System (SAMS), and Structural Dynamic Measurement System (SDMS). Remote Sensor Units (RSUs) are network relay stations that acquire flight data from sensors. Measured data is stored in the Remote Sensor Unit (RSU) until it receives a command to download data via RF to the Network Control Unit (NCU). Since each RSU has its own clock, it is necessary to synchronize measurements before analysis. Imprecise synchronization impacts analysis results. A study was performed to evaluate three different synchronization techniques: (i) measurements visually aligned to analytical time-response data using model comparison, (ii) Frequency Domain Decomposition (FDD), and (iii) lag from cross-correlation to align measurements. This paper presents the results of this study.

time synchronization↗

Evaluation of Retrieving Chlorophyll a Concentration and Colored Dissolved Organic Matter Absorption from Satellite Ocean Color Remote Sensing in the Coastal Waters of Hokkaido, Japan

Coastal ecosystems are important in biogeochemical cycles, because they provide many pathways for chemical elements and compounds to flow between the physical environment and living organisms. The spatial and temporal scales of the biotic and abiotic interactions establish the inherent dynamics of the coastal zone and the requirement for high-resolution investigations. Using match-up data collected in Hokkaido coastal waters, the study herein evaluated the performance of deriving chlorophyll (Chl) a concentration and colored dissolved organic matter (CDOM) absorption (a(sub CDOM)) as a function of wavelength (λ) from satellite observations. The Japanese Aerospace Exploration Agency (JAXA) Second generation GLobal Imager (SGLI), which has 250 m spatial resolution, was compared with other satellite ocean color (OC) sensors. Our results show that the standard SGLI OC4 algorithm with the 530 nm band provided the best performance for Chl a retrievals, and the end-member analysis (EMA) technique improved the estimation of a(sub CDOM)(λ) . Overall differences between in situ radiometric data and satellite retrievals suggest that additional challenges remain, especially in the ultraviolet and blue spectral domains which are useful for studying CDOM and harmful algae blooms in coastal waters. To fulfill applications wherein high-quality remote sensing data are required, the improvement of the atmospheric correction is a likely research area where additional accomplishment will be beneficial for satellite observations of optically complex coastal waters.

SGLI/GCOM-C↗

A primer on forest structure measurement with lidar for ecologists

Light detection and ranging (lidar) technology has fundamentally advanced the way we measure forest structure, facilitating new insights into ecological processes. Lidar for forest ecology applications is deployed on multiple types of platforms that operate from the ground, air, or space, and each has associated strengths and limitations. Ideally, the choice of what kind of lidar to use in a particular study should be guided by the ecological question of interest; however, practical considerations of cost, data availability, and processing tools can be equally important. This synthesis is a practical introduction to how different lidar platforms characterize forest structure (e.g., tree size/location, wood volume, branching structure, aboveground biomass, leaf properties), designed for a general audience of ecologists (not remote sensing scientists) seeking an accessible introduction to the use of lidar. We also provide examples of novel ecological insights from recent lidar research and describe current limitations and areas of expected improvement. Last, we include an appendix of data collected from terrestrial, mobile, unoccupied aerial system, airplane, and satellite lidar platforms within a common temperate forest area, with associated code to allow new lidar users to visualize and manipulate data in R.

Cushman, KC [ORNL] (ORCID:0000000234641151)↗

Monitoring ocean dumping with ERTS-1 data

The results of an analysis of ERTS-1 data for the New York Bight collected on 16 August 1972 are described. Results are presented which show acid-iron wastes, sewage sludge, suspended solids, and major water mass boundary features in the study area. The potential of satellite remote sensing for monitoring large scale events such as ocean dumping is discussed.

Wezernak, C. T.↗

Utility of ERTS for monitoring the breeding habitat of migratory waterfowl

Since 1968 the Bureau of Sport Fisheries and Wildlife (BSF&W) and the Environmental Research Institute of Michigan have cooperated on developing applications of remote sensing to the management of migratory waterfowl. Basically, this work has been concerned with (1) the assimilation of data on surface water conditions so that the data can be used as an index of annual waterfowl production, and (2) the collection of data on land use and wetland quality so that a measure of habitat carrying capacity is obtained. To date, efforts have been directed toward utilizing ERTS to monitor surface water conditions. An example of a model used for predicting the annual production of mallards (Anas platyrhynchos) is presented. The data inputs to this model and the potential for acquiring these data using ERTS are described.

Work, E. A., Jr.↗

Aperture synthesis concepts in microwave remote sensing of the earth

The application of aperture synthesis concepts, used for many years in radio astronomy to achieve high image resolution at a reasonable cost, to remote sensing technology is discussed. The electronically scanned thinned array radiometer (ESTAR) is put forward as a viable alternative to improve spatial resolution by an order of magnitude over what is presently achieved by microwave imaging systems that are collecting data from earth orbit. Future developments in airborne sensor technology and potential spacecraft application are described.

Swift, Calvin T.↗

Calibration of a synthetic aperture radiometer

Calibration algorithms for a synthetic aperture microwave radiometer are presented. The calibration is geared to Earth remote sensing applications, and is demonstrated on an airborne prototype of thinned array imager. Two approaches to the system calibration are presented; the first utilizes commonly available reference brightness temperature scenes, such as open water, and the second utilizes data collected on the antenna range. Both algorithms yield spatial response information which is cast in matrix form and inverted to obtain the image reconstruction formula. Experimental results are examined, and errors in some reconstructed images are linked to the present prototype antenna design. Algorithms for improving the synthesized antenna pattern side lobe performance are also presented. In one solution, the pattern efficiency is optimized by minimizing the pattern outside a defined beam. In another solution, the patterns are matched to a desired model pattern by the method of least squared errors. Both techniques offer an attractive alternative to aperture weighting.

Tanner, Alan B.↗