Search NASA⌕ Search

SEARCH · Search NASA

Results for “saturation temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Measurement of distributed strain and temperature based on higher order and higher mode Bragg conditions

A Bragg grating sensor for measuring distributed strain and temperature at the same time comprises an optical fiber having a single mode operating wavelength region and below a cutoff wavelength of the fiber having a multimode operating wavelength region. A saturated, higher order Bragg grating having first and second order Bragg conditions is fabricated in the optical fiber. The first order of Bragg resonance wavelength of the Bragg grating is within the single mode operating wavelength region of the optical fiber and the second order of Bragg resonance wavelength is below the cutoff wavelength of the fiber within the multimode operating wavelength region. The reflectivities of the saturated Bragg grating at the first and second order Bragg conditions are less than two orders of magnitude of one another. In use, the first and second order Bragg conditions are simultaneously created in the sensor at the respective wavelengths and a signal from the sensor is demodulated with respect to each of the wavelengths corresponding to the first and second order Bragg conditions. Two Bragg conditions have different responsivities to strain and temperature, thus allowing two equations for axial strain and temperature to be found in terms of the measure shifts in the primary and second order Bragg wavelengths. This system of equations can be solved for strain and temperature.

Sirkis, James S.↗
DOE OSTI2020

Stability of plutonium oxide nanoparticles in the presence of montmorillonite and implications for colloid facilitated transport

The physical and chemical stability of PuO 2 nanoparticles (intrinsic colloids) in groundwater will control their transport and may affect the performance of high-level radioactive waste repositories. In this study, we examined the chemical stability of two types of PuO 2 nanoparticles at both 25 and 80 °C. The “alkaline” PuO 2 nanoparticles were prepared by neutralizing an acidic Pu(IV) solution with dilute NaOH to pH ~9.5. The “acidic” PuO 2 nanoparticles were precipitated from 0.1 M nitric acid by heating a Pu(IV) solution at 60–80 °C for 30 min. The chemical stability of these PuO 2 nanoparticles was tested in the presence of montmorillonite, a common mineral in the environment and potentially relevant backfill material in some nuclear waste repository designs. The “alkaline” PuO 2 nanoparticles were found to be unstable over a timescale of months at both 25 and 80 °C, with elevated temperature enhancing their dissolution rates and sorption to montmorillonite. PuO 2 nanoparticle dissolution rates decreased with increasing Pu concentration, consistent with solution saturation. The “acidic” PuO 2 nanoparticles appeared to remain stable for much longer than the “alkaline” PuO2 nanoparticles. The “alkaline” PuO 2 nanoparticle dissolution rate constants were as high as 10 -11.9±0.4 mol m -2 s -1 and 10 -11.2±0.2 mol m -2 s -1 at 25 and 80 °C, respectively, while the “acidic” PuO 2 nanoparticle dissolution rate at 80 °C was 10 -13.5 mol m -2 s -1 . Based on transmission electron microscopy, the “alkaline” and “acidic” PuO 2 nanoparticles were of similar size (2.5–4.5 and 2–3 nm nanoparticles, respectively). However, the “acidic” PuO 2 nanoparticles formed more ordered nanoparticle aggregates. Our results suggest that the specific conditions experienced during PuO 2 nanoparticle formation could significantly affect the stability of PuO 2 in the presence of competing sorption processes and, in turn, the relative importance of intrinsic versus pseudocolloid transport in the environment.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

Ligand Coverage and Exciton Delocalization Control Chiral Imprinting in Perovskite Nanoplatelets

Chiral perovskites have generated significant recent interest, yet little is known about how their chiro-optical properties arise. In this study, chiral methylammonium lead halide perovskite nanoplatelets (NPLs) with varied halide and ligand compositions are prepared using direct synthetic methods. Circular dichroism (CD) and 1 H NMR studies find a non-linear relationship between the chiroptical properties and the ratio of chiral phenylethylammonium (PEA) to achiral octylamine (OA) ligands on the NPL surface. We use density functional theory (DFT) computations and a chiral imprinted particle-in-a-box model to rationalize the experimentally observed CD spectra and find that the saturation point of the induced chirality depends on the size of the perovskite exciton relative to the size of the ligands. Temperature-dependent CD and 1 H NMR studies, combined with DFT analysis, show that both the CD intensity and sign depend strongly on the structure and orientation of the ligands. Furthermore, this work reveals the complex nature of chiral imprinting in perovskite nanostructures and establishes a simple physical model for ligand-induced chiral imprinting to guide the further development of chiral materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An alternative ground state of MnBi 2 Te 4 obtained by magnetic annealing

Magnetic topological insulators are extremely interesting because they combine the unique properties of topological insulators with magnetism. While as-grown MnBi 2 Te 4 single crystals exhibit an A-type antiferromagnetic (AFM) ordering at T N ≈ 24 K, annealed MnBi 2 Te 4 under 10 T leads to the change of the magnetic properties from AFM to superparamagnetic behavior with the trend of the magnetization saturation at 2 K. Correspondingly, the magnetotransport properties change as well, revealing large positive magnetoresistance with the linear field dependence at low temperatures. Through the first-principles calculations, we provide insight into the experimental results. Our investigation demonstrates that magnetic annealing is a powerful approach for manipulating material properties due to the nearly degenerate ground states in MnBi 2 Te 4 .

Electronic transport↗
DOE OSTI2024

A pyroxene-based quantum magnet with multiple magnetization plateaus

Pyroxenes (AMX 2 O 6 ) consisting of infinite one-dimensional edge-sharing MO 6 chains and bridging XO 4 tetrahedra are fertile ground for finding quantum materials. Thus, here, we have studied calcium cobalt germanate (CaCoGe 2 O 6 ) and calcium cobalt silicate (CaCoSi 2 O 6 ) crystals in depth. Heat capacity data show that the spins in both compounds are dominantly Ising-like, even after being manipulated by high magnetic fields. On cooling below the Néel temperatures, a sharp field–induced transition in magnetization is observed for CaCoGe 2 O 6 , while multiple magnetization plateaus beneath the full saturation moment are spotted for CaCoSi 2 O 6 . Our analysis shows that these contrasting behaviors potentially arise from the different electron configurations of germanium and silicon, in which the 3d orbitals are filled in the former but empty in the latter, enabling electron hopping. Thus, silicate tetrahedra can aid the interchain superexchange pathway between cobalt(II) ion centers, while germanate ones tend to block it during magnetization.

Science & Technology - Other Topics↗
NASA NTRS1981

Influence of CO2 on melting of model granulite facies assemblages - A model for the genesis of charnockites

It is shown that partial melting studies at crustal pressures in SiO2-rich portions of the system KAlSiO4-Mg2SiO2-H2O-CO2 can be used in modeling the anatectic origin of charnockites. The univariant reaction phlogopite + sanidine + quartz + vapor = enstatite + liquid yields an SiO2-rich melt (granite analog) at 3 kbar; the vapor composition at the solidus is buffered to high H2O contents by virtue of the coexistence of phlogopite with its breakdown products. With higher pressures (8 and 15 kbar), the fluid phase is buffered to higher CO2 contents and the melt composition becomes enriched in K2O and MgO (charnockite analog). Melting relations are controlled through the expansion of the quartz liquidus field relative to the enstatite and sanidine fields with increasing pressure. It is noted that partial melts generated at the base of the crust in the presence of CO2-rich fluid will be of an alkaline nature and will crystallize enstatite at lower pressures. CO2-saturated melting of similar SiO2-rich bulk compositions (phlogopite-absent) through the reaction enstatite + sanidine + quartz + CO2 - liquid occurs at temperatures above 1000 C to about 15 kbar.

Wendlandt, R. F.↗
NASA NTRS1983

The sensitivity of a general circulation model to Saharan dust heating

Evidence is accumulating that tropospheric aerosols, such as Saharan dust, can significantly influence weather and climate. The Climate Model of the Goddard Laboratory for Atmospheric Sciences is presently used to assess the possible effects of Saharan dust on the weather and climate of North Africa and the tropical Atlantic Ocean. The three-dimensional model solves the conservation equations for the horizontal wind vector, potential temperature, water vapor mixing ratio, and surface pressure. Parameterizations are included for turbulent exchange at the earth surface, cumulus convection, large scale saturation, diurnally varying solar radiation, and terrestrial radiation. Realistic simulations are thereby produced for many aspects of the observed climate.

Randall, D.↗
NASA NTRS1987

IRAC test report. Gallium doped silicon band 2: Read noise and dark current

A direct readout infrared detector array, a candidate for the Space Infrared Telescope Facility (SIRTF) Infrared Array Camera (IRAC), has been tested. The array has a detector surface of gallium doped silicon, bump bonded to a 58x62 pixel MOSFET multiplexer on a separate chip. Although this chip and system do not meet all the SIRTF requirements, the critically important read noise is within a factor of 3 of the requirement. Significant accomplishments of this study include: (1) development of a low noise correlated double sampling readout system with a readout noise of 127 to 164 electrons (based on the detector integrator capacitance of 0.1 pF); (2) measurement of the readout noise of the detector itself, ranging from 123 to 214 electrons with bias only (best to worst pixel), and 256 to 424 electrons with full clocking in normal operation at 5.4 K where dark current is small. Thirty percent smaller read noises are obtained at a temperature of 15K; (3) measurement of the detector response versus integration time, showing significant nonlinear behavior for large signals, well below the saturation level; and (4) development of a custom computer interface and suitable software for collection, analysis and display of data.

Lamb, Gerald↗
NASA NTRS1990

Sources of variability in satellite-derived estimates of phytoplankton production in the eastern tropical Pacific

As a proxy for satellite CZCS observations and concurrent measurements of primary production rates, data from 138 stations occupied seasonally during 1967-1968 in the offshore eastern tropical Pacific were analyzed in terms of six temporal groups and our current regimes. Multiple linear regressions on column production Pt show that simulated satellite pigment is generally weakly correlated, but sometimes not correlated with Pt, and that incident irradiance, sea surface temperature, nitrate, transparency, and depths of mixed layer or nitracline assume little or no importance. After a proxy for the light-saturated chlorophyll-specific photosynthetic rate P(max) is added, the coefficient of determination ranges from 0.55 to 0.91 (median of 0.85) for the 10 cases. In stepwise multiple linear regressions the P(max) proxy is the best predictor for Pt.

Banse, Karl↗
NASA NTRS1992

The three stages of magma ocean cooling

Models of magma ocean (MO) cooling and crystallization can provide important constraints on MO plausibility for a given planet, on the origin of long term, stable crusts, and even on the origin of the solar system. Assuming the MO is initially extensive enough to have a mostly molten surface, its first stage of cooling is an era of radiative heat loss from the surface, with extremely rapid convection below, and no conductive layer in between. The development of the chill crust starts the second stage of MO cooling. Heat loss is now limited by conduction through the crust. The third stage of cooling starts when the near surface MO evolves compositionally to the point of saturation with feldspar. At this point, the cooling rate again precipitously diminishes, the rate of crustal thickness growth as a function of temperature suddenly increases. More work on incorporating chemical constraints into the evolving physical models of MO solidification would be worthwhile.

Warren, Paul H.↗
NASA NTRS1992

Radiative instabilities and 1000 second fluctuations in astrophysical masers

A stability analysis for small (linear) perturbations is presented for the radiation in astrophysical masers treated in the usual, linear maser approximation. Instabilities that oscillate with a period of about L/c, where L is the length of the maser are found. They occur (1) when the maser is partly but not heavily saturated, (2) when the decay rate Gamma for the molecular states is near c/L, and (3) when the product of the brightness temperature T sub 0 of the incident radiation and the angle for the beaming is less than a critical value that depends upon the particular masing transition. A fourth parameter, the fractional inversion in the pumping multiplied by (T sub 0/frequency), determines the importance of spontaneous emission which can eliminate the instabilities. These instabilities are a likely cause for the fluctuations in the radiation from the 18 cm OH masers that have been reported to occur on time scales as short as 1000 s. The calculations are applicable to other types of astrophysical masers as well, and suggest that spontaneous emission will prevent similar instabilities in the H2O and SiO masers.

Scappaticci, Gerardo A.↗
NASA NTRS2012

Mars Atmospheric CO2 Condensation Above the North and South Poles as Revealed by Radio Occultation, Climate Sounder, and Laser Ranging Observations

We study the condensation of CO2 in Mars atmosphere using temperature profilesretrieved from radio occultation measurements from Mars Global Surveyor (MGS) as wellas the climate sounding instrument onboard the Mars Reconnaissance Orbiter (MRO),and detection of reflective clouds by the MGS Mars Orbiter Laser Altimeter (MOLA). Wefind 11 events in 1999 where MGS temperature profiles indicate CO2 condensation andMOLA simultaneously detects reflective clouds. We thus provide causal evidence thatMOLA non-ground returns are associated with CO2 condensation, which strongly indicatestheir nature being CO2 clouds. The MGS and MRO temperature profiles together revealthe seasonal expansion and shrinking of the area and the vertical extent of atmosphericsaturation. The occurrence rate of atmospheric saturation is maximized at high latitudes inthe middle of winter. The atmospheric saturation in the northern polar region exhibits moreintense seasonal variation than in the southern polar region. In particular, a shrinking ofsaturation area and thickness from LS 270 to 300 in 2007 is found; this is probablyrelated to a planet-encircling dust storm. Furthermore, we integrate the condensation areaand the condensation occurrence rate to estimate cumulative masses of CO2 condensatesdeposited onto the northern and southern seasonal polar caps. The precipitation flux isapproximated by the particle settling flux which is estimated using the impulse responses ofMOLA filter channels. With our approach, the total atmospheric condensation mass canbe estimated from these observational data sets with average particle size as the onlyfree parameter. By comparison with the seasonal polar cap masses inferred from thetime-varying gravity of Mars, our estimates indicate that the average condensate particleradius is 822 mm in the northern hemisphere and 413 mm in the southern hemisphere.Our multi-instrument data analysis provides new constraints on modeling the global climateof Mars.

MOLA↗
NASA NTRSDate not supplied

The Effect of Anode Configuration on the Plasma Plume of a 25-A class Hollow Cathode

The effect of anode configuration on the plasma plume properties of a 25-A class hollow cathode are experimentally characterized. At a nominal operating condition of 20.8 A and 14.7 sccm of xenon, the cathode was operated with two axially-segmented anodes of different diameters at varying distance from the cathode. A fast, reciprocating motion stage was used to rapidly insert an ion saturation probe and an emissive probe on cathode centerline, and from those measurements, spatial profiles of plasma density, plasma potential, and electron temperature were calculated. For both anode diameters, maximum plasma potential and electron temperature increased with increasing anode distance. However, the 64-mm diameter anode was found to be significantly more sensitive to position, with measurements indicating that parameters changed continuously with position instead of an instantaneous mode change at a certain critical distance. The 254-mm diameter, in contrast, showed much more similar plasma property profiles across the range of anode positions tested and much smaller changes per unit increase in distance. These results are discussed in the context of assessing anode design for component-level cathode tests.

Space propulsion↗
NASA NTRSDate not supplied

The Effect of Anode Configuration on the Plasma Plume of a 25-A class Hollow Cathode

The effect of anode configuration on the plasma plume properties of a 25-A class hollow cathode are experimentally characterized. At a nominal operating condition of 20.8 A and 14.7 sccm of xenon, the cathode was operated with two axially-segmented anodes of different diameters at varying distance from the cathode. A fast, reciprocating motion stage was used to rapidly insert an ion saturation probe and an emissive probe on cathode centerline, and from those measurements, spatial profiles of plasma density, plasma potential, and electron temperature were calculated. For both anode diameters, maximum plasma potential and electron temperature increased with increasing anode distance. However, the 64-mm diameter anode was found to be significantly more sensitive to position, with measurements indicating that parameters changed continuously with position instead of an instantaneous mode change at a certain critical distance. The 254-mm diameter, in contrast, showed much more similar plasma property profiles across the range of anode positions tested and much smaller changes per unit increase in distance. These results are discussed in the context of assessing anode design for component-level cathode tests.

space propulsion↗
DOE OSTI2020

Modified alkaline peroxide pretreatment: An efficient path forward for bioethanol production from bamboo

To overcome the typical delignification saturation point of alkaline peroxide pretreatment and further facilitate lignin removal, a novel modified alkaline hydrogen peroxide pretreatment (MAHP) was proposed by introducing ethanol into the reaction system. The dosages of H 2 O 2 , ethanol, and pretreatment temperature were optimized, and the results revealed that a maximum lignin removal as high as 79.25% could be achieved at only 100 °C, 3 wt% H 2 O 2 concentration and 1 wt% ethanol concentration. Meanwhile, 76.5% of glucan and 56.0% of xylan were preserved at this pretreatment condition. By overcoming the delignification saturation point, enzymatic hydrolysis efficiency was remarkably enhanced, achieving 96.76% and 97.38% of glucan and xylan conversion, respectively, which are 7.4 and 11.4 times as compared to that of the untreated bamboo. Furthermore, the simultaneous saccharification and fermentation (SSF) result indicated an identical ethanol yield of ~75% when elevating the SSF solid loading from 5% to 30%. Based on the sequential SSF and xylose fermentation results, about 5.6 tons of bamboo would be consumed to produce 1 ton of ethanol. Finally, the energy balance revealed that a positive balance of 1255.4 KJ could be generated via processing 1 kg bamboo. Here, the results demonstrate that the MAHP is a promising high-efficiency pretreatment technology for bamboo due to the mild pretreatment severity and robust ethanol yield.

30 DIRECT ENERGY CONVERSION↗
NASA NTRS1999

The Effect of Climate Change on Ozone Depletion through Changes in Stratospheric Water Vapour

Several studies have predicted substantial increases in Arctic ozone depletion due to the stratospheric cooling induced by increasing atmospheric CO2 concentrations. But climate change may additionally influence Arctic ozone depletion through changes in the water vapor cycle. Here we investigate this possibility by combining predictions of tropical tropopause temperatures from a general circulation model with results from a one-dimensional radiative convective model, recent progress in understanding the stratospheric water vapor budget, modelling of heterogeneous reaction rates and the results of a general circulation model on the radiative effect of increased water vapor. Whereas most of the stratosphere will cool as greenhouse-gas concentrations increase, the tropical tropopause may become warmer, resulting in an increase of the mean saturation mixing ratio of water vapor and hence an increased transport of water vapor from the troposphere to the stratosphere. Stratospheric water vapor concentration in the polar regions determines both the critical temperature below which heterogeneous reactions on cold aerosols become important (the mechanism driving enhanced ozone depletion) and the temperature of the Arctic vortex itself. Our results indicate that ozone loss in the later winter and spring Arctic vortex depends critically on water vapor variations which are forced by sea surface temperature changes in the tropics. This potentially important effect has not been taken into account in previous scenarios of Arctic ozone loss under climate change conditions.

Kirk-Davidoff, Daniel B.↗
NASA NTRS1982

Solution growth of crystals in zero gravity

A series of experiments will be performed in which triglycine sulfate (TGS) crystals will be grown by a low-temperature solution growth technique in the microgravity environment of the orbital Spacelab. Triglycine sulfate (TGS) crystals will be grown in the Fluid Experiment System (FES) facility on Spacelab 3 by slowly extracting heat at a controlled rate through a seed crystal of TGS suspended on an insulated sting in a saturated solution of TGS. The FES rack assembly designed for SL-3 is shown in Figure I-1, and a detailed view of the test cell layout is presented in Figure I-2. Variations in the liquid density, solution concentration and temperature around the growing crystal will be studied using a variety of techniques, such as schlieren, shadowgraph, and interferometric measurements. Growth in Earth gravity will also be studied by the same optical techniques, and in both cases the resulting crystalline features will be compared and correlated with the growth conditions.

Lai, R. B.↗
DOE OSTI2025

Experimental progress and future plans on spherical tokamak, QUEST

QUEST (Q-shu university experiment with steady state spherical tokamak) aims at effective plasma current start-up and stable maintenance of plasma discharge. To solve the inherent problems in a spherical tokamak (ST) arising from insufficient space for placing the inductive center solenoid, electron cyclotron current drive (ECCD) and transient coaxial helicity injection (T-CHI) are implemented as a non-inductive plasma start-up method in QUEST. Efficient ECCD assisted by energetic electrons could be achieved. By combining control of the wave injection angle and application of a negative toroidal electric field, the bulk electron temperature could be raised up to 1 keV due to selective wave power absorption in the bulk electrons. The plasma current of over 50 kA contained within the closed flux surface could be obtained with a floating single biased electrode placed on lower divertor plates for T-CHI. Long-pulse operations on QUEST are impeded frequently due to wall saturation and subsequent density runaway caused by fuel particle imbalance. Since 2014, a unique tool called the ‘hot wall’ has been implemented to overcome the imbalance. The hot wall has a capability to regulate its surface temperature using a heater and two water cooling channels. With the help of the hot wall, 6 h discharges were obtained in 2020. Cooling down of the surface of the hot wall was significantly effective in recovering the wall pumping and was useful to extend the pulse duration. Augmentation of the toroidal magnetic field, B T up to 0.5 T from 0.25 T and a continuous wave (CW) gyrotron of 28 GHz are planned for QUEST in the near future. As raising B T provides a fundamental resonance of electron cyclotron waves (ECWs) with 28 GHz, more effective plasma current start-up and heating will be performed. Long-pulse operations with higher plasma parameters are expected.

QUEST↗