SEARCH · Search NASA

Results for “simulation results”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

All sources NASA NTRS DOE OSTI

NASA NTRS1973

A comparison of results from two simulators used for studies of astronaut maneuvering units

A comparison of the results from a fixed-base, six-degree-of -freedom simulator and a moving-base, three-degree-of-freedom simulator was made for a close-in, EVA-type maneuvering task in which visual cues of a target spacecraft were used for guidance. The maneuvering unit (the foot-controlled maneuvering unit of Skylab Experiment T020) employed an on-off acceleration command control system operated entirely by the feet. Maneuvers by two test subjects were made for the fixed-base simulator in six and three degrees of freedom and for the moving-base simulator in uncontrolled and controlled, EVA-type visual cue conditions. Comparisons of pilot ratings and 13 different quantitative parameters from the two simulators are made. Different results were obtained from the two simulators, and the effects of limited degrees of freedom and uncontrolled visual cues are discussed.

Stewart, E. C.↗

DOE OSTI2020

Modeling CO 2 plume migration using an invasion-percolation approach that includes dissolution

Geological carbon dioxide (CO 2 ) sequestration has been proposed as a viable technique to decrease effective emissions of CO 2 into the atmosphere. However, the security of this sequestration is tied to our understanding of the long-term migration of CO 2 in subsurface. The dissolution of CO 2 in the reservoir brine is one of the main long-term trapping mechanisms. However, the assumptions used in large-scale reservoir simulations usually lead to an overestimation of the dissolution volume. We propose a modified approach based on the macroscopic invasion-percolation (MIP) theory that allows the dissolution of CO 2 into brine. We used a high-resolution geological model to compare the Darcy-, modified MIP-, and classic MIP-based simulation results. We observed a significant shrinkage in the nonaqueous plume volume when dissolution is considered during the MIP simulation. In the case of Darcy-based simulation, the plume was completely trapped inside the reservoir with limited migration even after a thousand-year simulation. On the other hand, the majority of the plume migrated out of the simulated reservoir in the case of MIP. Our approach provides more realistic estimation of the dissolution volume and nonaqueous plume extent while leveraging the computational efficiency enjoyed by MIP.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Double Diffusion Maps and their Latent Harmonics for scientific computations in latent space

In this work, we introduce a data-driven approach to building reduced dynamical models through manifold learning; the reduced latent space is discovered using Diffusion Maps (a manifold learning technique) on time series data. A second round of Diffusion Maps on those latent coordinates allows the approximation of the reduced dynamical models. This second round enables mapping the latent space coordinates back to the full ambient space (what is called lifting); it also enables the approximation of full state functions of interest in terms of the reduced coordinates. In our work, we develop and test three different reduced numerical simulation methodologies, either through pre-tabulation in the latent space and integration on the fly or by going back and forth between the ambient space and the latent space. The data-driven latent space simulation results, based on the three different approaches, are validated through (a) the latent space observation of the full simulation through the Nyström Extension formula, or through (b) lifting the reduced trajectory back to the full ambient space, via Latent Harmonics. Latent space modeling often involves additional regularization to favor certain properties of the space over others, and the mapping back to the ambient space is then constructed mostly independently from these properties; here, we use the same data-driven approach to construct the latent space and then map back to the ambient space.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Distributed deep learning training using silicon photonic switched architectures

The scaling trends of deep learning models and distributed training workloads are challenging network capacities in today’s datacenters and high-performance computing (HPC) systems. We propose a system architecture that leverages silicon photonic (SiP) switch-enabled server regrouping using bandwidth steering to tackle the challenges and accelerate distributed deep learning training. In addition, our proposed system architecture utilizes a highly integrated operating system-based SiP switch control scheme to reduce implementation complexity. To demonstrate the feasibility of our proposal, we built an experimental testbed with a SiP switch-enabled reconfigurable fat tree topology and evaluated the network performance of distributed ring all-reduce and parameter server workloads. The experimental results show up to 3.6× improvements over the static non-reconfigurable fat tree. Our large-scale simulation results show that server regrouping can deliver up to 2.3× flow throughput improvement for a 2× tapered fat tree and a further 11% improvement when higher-layer bandwidth steering is employed. The collective results show the potential of integrating SiP switches into datacenters and HPC systems to accelerate distributed deep learning training.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2022

Stringent σ8 constraints from small-scale galaxy clustering using a hybrid MCMC + emulator framework

ABSTRACT We present a novel simulation-based hybrid emulator approach that maximally derives cosmological and Halo Occupation Distribution (HOD) information from non-linear galaxy clustering, with sufficient precision for DESI Year 1 (Y1) analysis. Our hybrid approach first samples the HOD space on a fixed cosmological simulation grid to constrain the high-likelihood region of cosmology + HOD parameter space, and then constructs the emulator within this constrained region. This approach significantly reduces the parameter volume emulated over, thus achieving much smaller emulator errors with fixed number of training points. We demonstrate that this combined with state-of-the-art simulations result in tight emulator errors comparable to expected DESI Y1 LRG sample variance. We leverage the new abacussummit simulations and apply our hybrid approach to CMASS non-linear galaxy clustering data. We infer constraints on σ8 = 0.762 ± 0.024 and fσ8(zeff = 0.52) = 0.444 ± 0.016, the tightest among contemporary galaxy clustering studies. We also demonstrate that our fσ8 constraint is robust against secondary biases and other HOD model choices, a critical first step towards showcasing the robust cosmology information accessible in non-linear scales. We speculate that the additional statistical power of DESI Y1 should tighten the growth rate constraints by at least another 50–60 ${{\ \rm per\ cent}}$, significantly elucidating any potential tension with Planck. We also address the ‘lensing is low’ tension, which we find to be in the same direction as a potential tension in fσ8. We show that the combined effect of a lower fσ8 and environment-based bias accounts for approximately $50{{\ \rm per\ cent}}$ of the discrepancy.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

Impedance Modeling and Stability Analysis for the PLL-less and Voltage Sensor-less Grid-tied Converters

The newly developed control methodology, which omits the phase-locked loop (PLL) and voltage sensor, has garnered considerable attention for its rapid dynamic response and reduced hardware expenses. Nonetheless, its stability concerns have not yet been thoroughly scrutinized. In this paper, the impedance modeling of the PLL-less and voltage sensorless control strategy has been established. The impedance model has been contrasted with the traditional PLL-based control scheme. Our findings demonstrate that the PLL-less and voltage sensorless control approach lacks the negative resistance behavior that is frequently observed in the traditional scheme, which results in unstable operations. Furthermore, the role of virtual resistance has been examined. To substantiate the aforementioned findings, simulation results are presented.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2020

CheKiPEUQ

Parameter estimation for complex physical problems often suffers from finding 'solutions' that are not physically realistic. The CheKiPEUQ software provides tools for finding physically realistic parameter estimates.and CheKiPEUQ provide tools for making graphs of the parameter positions within parameter space as well as plots of the final simulation results. The primary purpose of the CheKiPEUQ software is to enable more physically realistic parameter estimation from comparing simulations to experiments. Specifically, when prior knowledge is available about the region of parameter space which is physically realistic and when the level of uncertainty from experiment can be estimated. The software is intentionally general and can be used for almost any type of simulation. The software is made in a user friendly manner so that users can simply enter the required data and then run the program, following guidelines provided by the authors along with some trial and error. Examples are provided. Users do not need to understand the methodology that will be namedi in the following sentences. While CheKiPEUQ can be used for conventional parameter estimation and other uses, the primary uses for CheKiPEUQ are: 1) Bayesian Parameter Estimation, 2) Bayesian Model Discrimination, 3) Bayesian Design of Experiments. For more information see the project website, documentation, examples, and related publications.

Savara, Aditya [Oak Ridge National Lab. (ORNL), Oa↗

DOE OSTI2023

Catalytic Upgrading of Carbohydrates in Waste Streams to Hydrocarbons: Paper Sludge to Fuel Project (PStF)

This research, funded by the Department of Energy Bioenergy Technologies Office (DOE BETO), aims to understand the barriers and assess opportunities for transforming carbohydrates in paper sludge, a solid lignocellulosic residue from the pulp and paper industry. The goal is to turn the paper sludge into a liquid hydrocarbon product that can be blended into jet fuel, both economically and sustainably. Research groups at North Carolina State University, National Renewable Energy Laboratory, and Yale University collaborated synergistically, leveraging their expertise in pulp and paper operations, biomass deconstruction, and catalytic upgrading to propose a pathway that efficiently captures the energy in paper sludge. Findings from this study could potentially contribute to advancing biomass conversion technologies, aligning with the efforts of the U.S. DOE BETO. This report documents the experimental and simulation results of a biochemical and catalytic pathway designed to transform paper sludge into a liquid hydrocarbon product. The process involves a sequence of seven steps, including ash removal, carbohydrate enzymatic hydrolysis, sugar dehydration, solvent recovery, aldol-condensation between furans and ketone, hydrogenation, and hydrodeoxygenation to obtain a hydrocarbon blend in the ~C10 range. The experimental efforts from the initiation of the project were guided by techno-economic analysis (TEA) and sensitivity analysis results including around seventy-eight operational parameters. This methodology facilitated the efficient use of resources over time. This study relies on detailed process simulations and TEA to determine the minimum fuel selling price (MFSP) for the hydrocarbon fuel product. Preliminary TEA results led to the evaluation of eight case studies considering alternative dehydration co-solvents, operational settings, and biorefinery layouts. Finally, the life cycle assessment of twenty-eight scenarios, comparing various dehydration co-solvents, fuel sources, chemical feedstock sources, side product utilization, and other process settings, was conducted. Landfilling scenarios with and without landfill gas recovery were also estimated, analyzed, and compared.

09 BIOMASS FUELS↗

DOE OSTI2024

Integrated Transmission and Distribution Co-Simulation Platform for Demonstration of Bulk Grid Services Using Distributed Energy Resources

In September 2020, the Federal Energy Regulatory Commission (FERC) released Order 2222, which opens wholesale markets to small-capacity distributed energy resources (DERs), recognizing their potential in improving operational efficiency by providing bulk grid services. Therefore, a co-simulation capability that can connect transmission and distribution (T&D) simulations and evaluate the impacts of DER provision of bulk grid services is needed. In this paper, we present a new integrated T&D co-simulation platform that incorporates T&D system simulators, DER aggregator/group strategies, and a co-simulation coordinator. Industry-standard communication protocols are employed to mimic real-world conditions. Secondary frequency regulation is selected as the representative bulk grid service, and we simulate the responses of DERs to the frequency regulation signals. The simulation results for a solar-rich distribution feeder in Colorado, USA, demonstrate how the T&D co-simulation setup is used to evaluate the contributions of DERs to minimize the bulk grid frequency deviation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2022

A Hydro-particle-mesh Code for Efficient and Rapid Simulations of the Intracluster Medium

We introduce the cosmological HYPER code based on an innovative hydro-particle-mesh (HPM) algorithm for efficient and rapid simulations of gas and dark matter. For the HPM algorithm, we update the approach of Gnedin & Hui to expand the scope of its application from the lower-density intergalactic medium (IGM) to the higher-density intracluster medium (ICM). While the original algorithm tracks only one effective particle species, the updated version separately tracks the gas and dark matter particles, as they do not exactly trace each other on small scales. For the approximate hydrodynamics solver, the pressure term in the gas equations of motion is calculated using robust physical models. In particular, we use a dark matter halo model, ICM pressure profile, and IGM temperature–density relation, all of which can be systematically varied for parameter-space studies. We show that the HYPER simulation results are in good agreement with the halo model expectations for the density, temperature, and pressure radial profiles. Simulated galaxy cluster scaling relations for Sunyaev–Zel’dovich (SZ) and X-ray observables are also in good agreement with mean predictions, with scatter comparable to that found in hydrodynamic simulations. HYPER also produces lightcone catalogs of dark matter halos and full-sky tomographic maps of the lensing convergence, SZ effect, and X-ray emission. These simulation products are useful for testing data analysis pipelines, generating training data for machine learning, understanding selection and systematic effects, and for interpreting astrophysical and cosmological constraints.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1990

Potential evapotranspiration and the likelihood of future drought

The possibility that the greenhouse warming predicted by the GISS general-circulation model and other GCMs could lead to severe droughts is investigated by means of numerical simulations, with a focus on the role of potential evapotranspiration E(P). The relationships between precipitation (P), E(P), soil moisture, and vegetation changes in GCMs are discussed; the empirically derived Palmer drought-intensity index and a new supply-demand index (SDDI) based on changes in P - E(P) are described; and simulation results for the period 1960-2060 are presented in extensive tables, graphs, and computer-generated color maps. Simulations with both drought indices predict increasing drought frequency for the U.S., with effects already apparent in the 1990s and a 50-percent frequency of severe droughts by the 2050s. Analyses of arid periods during the Mesozoic and Cenozoic are shown to support the use of the SDDI in GCM drought prediction.

Rind, D.↗

NASA NTRS1991

Battery performance simulation for the Magellan mission

A battery performance simulation for the Magellan mission to Venus has been operating at the Jet Propulsion Laboratory for nearly three years. The unique operational requirements for the Magellan batteries and the test system constructed to simulate them are described. Simulation results to date are presented and compared with actual spacecraft battery performance. Recommendations for planning of future mission simulation tests are provided.

Glueck, Peter↗

NASA NTRS1998

Theory, Modeling, and Simulation of Semiconductor Lasers

Semiconductor lasers play very important roles in many areas of information technology. In this talk, I will first give an overview of semiconductor laser theory. This will be followed by a description of different models and their shortcomings in modeling and simulation. Our recent efforts in constructing a fully space and time resolved simulation model will then be described. Simulation results based on our model will be presented. Finally the effort towards a self-consistent and comprehensive simulation capability for the opto-electronics integrated circuits (OEICs) will be briefly reviewed.

Ning, Cun-Zheng↗

NASA NTRS2002

High-Resolution Simulation of Hurricane Bonnie (1998): Microphysics Validation using TRMM Data

A simulation of Hurricane Bonnie (1998) has been performed using multiple grid nesting to 2 km grid spacing. The simulation is initialized with large-scale analysis fields from the European Center for Medium Range Forecasts and with a bogus vortex inserted via four-dimensional variational data assimilation. The simulation reproduces well the storm intensity, the wavenumber 1 asymmetry of the precipitation field, the occurrence of deep convective towers within the eyewall, and the presence of broad stratiform precipitation regions. Radar and microwave observations from TRMM are used to validate the simulation. Result show excessive graupel production and, to some extent, excessive precipitation production in general by the model. Additional simulations are conducted (and validated by TRMM data) to test parameters and assumptions within the microphysics parameterizations including particle size distributions, particle densities, and assumptions that impact the partitioning of precipitation mass between graupel and snow.

Starr, David OC.↗

NASA NTRS2018

Exploring the Limits of High Altitude GPS for Future Lunar Missions

An increasing number of spacecraft are relying on the Global Positioning System (GPS) for navigation at altitudes near or above the GPS constellation itself - the region known as the Space Service Volume (SSV). While the formal definition of the SSV ends at geostationary altitude, the practical limit of high-altitude space usage is not known, and recent missions have demonstrated that signal availability is sufficient for operational navigation at altitudes halfway to the moon. This paper presents simulation results based on a high-fidelity model of the GPS constellation, calibrated and validated through comparisons of simulated GPS signal availability and strength with flight data from recent high-altitude missions including the Geostationary Operational Environmental Satellite 16 (GOES-16) and the Magnetospheric Multiscale (MMS) mission. This improved model is applied to the transfer to a lunar near-rectilinear halo orbit (NRHO) of the class being considered for the international Deep Space Gateway concept. The number of GPS signals visible and their received signal strengths are presented as a function of receiver altitude in order to explore the practical upper limit of high-altitude space usage of GPS.

Deep Spac↗

NASA NTRS2018

Exploring the Limits of High Altitude GPS for Future Lunar Missions

An increasing number of spacecraft are relying on the Global Positioning System (GPS) for navigation at altitudes near or above the GPS constellation itself - the region known as the Space Service Volume (SSV). While the formal definition of the SSV ends at geostationary altitude, the practical limit of high-altitude space usage is not known, and recent missions have demonstrated that signal availability is sufficient for operational navigation at altitudes halfway to the moon. This paper presents simulation results based on a high-fidelity model of the GPS constellation, calibrated and validated through comparisons of simulated GPS signal availability and strength with flight data from recent high-altitude missions including the Geostationary Operational Environmental Satellite 16 (GOES-16) and the Magnetospheric Multiscale (MMS) mission. This improved model is applied to the transfer to a lunar near-rectilinear halo orbit (NRHO) of the class being con- sidered for the international Deep Space Gateway concept. The number of GPS signals visible and their received signal strengths are presented as a function of receiver altitude in order to explore the practical upper limit of high-altitude space usage of GPS.

Deep Spac↗

NASA NTRSDate not supplied

Autogenous Pressurization of a Cryogenic Tank Using Computational Fluid Dynamics

Well-validated simulation tools can be used to predict long-term storage and transfer of cryogenic propellants, which are essential to NASA’s mission plan to return to the Moon and continue to Mars. Autogenous pressurization of propellant tanks is used to supply rocket engine turbopumps with pressurized liquid fuel and oxidizer, preventing cavitation. Additionally, autogenous pressurization can be used to pressurize propellant tanks to support on-orbit propellant transfer. In lieu of expensive tests conducted on-orbit, accurate predictive computational models of these processes can be used to reduce system and propellant mass as well as mission risk. Using simulation tools also reduces the cost of analyzing and developing this technology. This study presents a multiphase computational fluid dynamics model capable of simulating autogenous pressurization of a large cryogenic tank using the commercial code STAR-CCM+. Experimental data from a full-scale tank pressurization test under terrestrial gravity is compared to simulation results using transient error metrics. Comparisons show good agreement and give confidence in using these and other validated simulation tools to develop cryogenic pressurization systems.

Cryogenics↗

NASA NTRSDate not supplied

Autogenous Pressurization of a Cryogenic Tank using Computational Fluid Dynamics

cryogenics↗