Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface complexation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Synthetic Metal Atomic Layer Deposition Tool (Final Report)

As part of the Cyclotron Road program, Laminera Inc. worked towards development of atomic layer deposition process customizations and tool modifications to produce synthetic metal films at commercial scale and improve the film quality. Today's state-of-the-art in atomic layer deposited synthetic metal technology is only possible at a research-scale because current tools have practical limitations for scaling industrially and generating high conductivity films. Ultrathin, conformal synthetic metal films have many possible applications such as high surface area nanoporous electrodes for supercapacitors and water desalination devices; protective electrode coatings for electrochemical devices; seed layers for semiconductor device fabrication; or metallic component stabilizing coatings that enable enhanced storage density in next generation hard disk drives. The best synthetic metal conductive and plasmonic properties have been demonstrated using sputtering, which relies on high temperature sputtering with substrate dependent and directional growth limiting usage. This work explored refining process and tool modifications to create ultrathin, conformal, synthetic metal films that can be deposited with high quality over complex three-dimensional surfaces.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Adsorption mechanisms of cesium at calcium-silicate-hydrate surfaces using molecular dynamics simulations

We report understanding the mechanisms of interactions and immobilization of radionuclides in cement systems at the molecular level is key to developing safe and novel solutions for the long-term storage of nuclear wastes. The molecular level adsorption mechanisms of cesium (Cs + ) ions onto tobermorite 9 Å, tobermorite 14 Å, and jennite – three crystalline structural analogues for calcium-silicate-hydrates, the main components in cement-based materials, were investigated using molecular dynamics (MD) simulations. Convergence monitoring of the simulations, using the root mean square displacement with average correlation analysis, indicated that MD trajectories of 10–15 ns were needed given the size of the selected computational cell to properly capture the dynamic process of adsorption. Cs + ions adsorbed as inner-sphere complexes at the tobermorite surfaces, while they showed lower affinity for jennite. The charge and structure of the surface layer strongly influenced the adsorption mechanisms of Cs + ions. Strong association with the hexagonal cavities of the silica sites were seen at the tetrahedral SiO 4 surface of the tobermorite structures. Cs + ion adsorption was attributed to co-ion adsorption at the octahedral CaO 6 surface of tobermorite 9 Å, cation exchange at that of tobermorite 14 Å, and electrostatic interaction with the surface hydroxyl groups for jennite. Distribution coefficients of Cs + ions onto cement pastes derived from molecular dynamics by taking the surface structure and dynamics of Cs + ions directly into account showed a range of overlap with experimental results.

42 ENGINEERING↗
NASA NTRS2021

Compositional Study of Trans-Neptunian Objects at λ > 2.2 μm

Using data from the Infrared Array Camera on the Spitzer Space Telescope, we present photometric observations of a sample of 100 trans-Neptunian objects (TNOs) beyond 2.2 μm. These observations, collected with two broadband filters centered at 3.6 and 4.5 μm, were done in order to study the surface composition of TNOs, which are too faint to obtain spectroscopic measurements. With this aim, we have developed a method for the identification of different materials that are found on the surfaces of TNOs. In our sample, we detected objects with colors that are consistent with the presence of small amounts of water, and we were able to distinguish between surfaces that are predominantly composed of complex organics and amorphous silicates. We found that 86% of our sample have characteristics that are consistent with a certain amount of water ice, and the most common composition (73% of the objects) is a mixture of water ice, amorphous silicates, and complex organics. Twenty-three percent of our sample may include other ices, such as carbon monoxide, carbon dioxide, methane, or methanol. Additionally, only small objects seem to have surfaces dominated by silicates. This method is a unique tool for the identification of complex organics and to obtain the surface composition of extremely faint objects. Furthermore, this method will be beneficial when using the James Webb Space Telescope for differentiating groups within the trans-Neptunian population.

Trans-Neptunian objects↗
DOE OSTI2024

Heparan sulfate promotes TRAIL-induced tumor cell apoptosis

TRAIL (TNF-related apoptosis-inducing ligand) is a potent inducer of tumor cell apoptosis through TRAIL receptors. While it has been previously pursued as a potential anti-tumor therapy, the enthusiasm subsided due to unsuccessful clinical trials and the fact that many tumors are resistant to TRAIL. In this report, we identified heparan sulfate (HS) as an important regulator of TRAIL-induced apoptosis. TRAIL binds HS with high affinity (K D = 73 nM) and HS induces TRAIL to form higher-order oligomers. The HS-binding site of TRAIL is located at the N-terminus of soluble TRAIL, which includes three basic residues. Binding to cell surface HS plays an essential role in promoting the apoptotic activity of TRAIL in both breast cancer and myeloma cells, and this promoting effect can be blocked by heparin, which is commonly administered to cancer patients. We also quantified HS content in several lines of myeloma cells and found that the cell line showing the most resistance to TRAIL has the least expression of HS, which suggests that HS expression in tumor cells could play a role in regulating sensitivity towards TRAIL. We also discovered that death receptor 5 (DR5), TRAIL, and HS can form a ternary complex and that cell surface HS plays an active role in promoting TRAIL-induced cellular internalization of DR5. Combined, our study suggests that TRAIL-HS interactions could play multiple roles in regulating the apoptotic potency of TRAIL and might be an important point of consideration when designing future TRAIL-based anti-tumor therapy.

60 APPLIED LIFE SCIENCES↗
NASA NTRS1983

Nature of the H chondrite parent body regolith - Evidence from the Dimmitt breccia

Meteorite regolith breccias are clastic rocks which formed by lithification of fragmental regolith material that once resided at the surface of a meteorite parent body. A study is reported of the matrix and 21 clasts of various sizes (0.2-24 mm) in the Dimmitt H chondrite regolith breccia using petrographic and electron microprobe techniques. In addition, oxygen isotope studies of three clasts and instrumental neutron activation analysis (INAA) and Ar-39/Ar-40 age dating of one clast are reported. The Dimmitt meteorite was found about 1942 near Dimmitt, Texas. Attention is given to analytical procedures, the clastic matrix, equilibrated clasts, poikilitic melt-rock clast, clasts of different chondrite groups, graphite-magnetite aggregates, the origin of exotic clasts, and the complexity of parent body surfaces processes.

Rubin, A. E.↗
DOE OSTI2021

Molecular-Scale Understanding of Sulfate Exchange from Schwertmannite by Chromate Versus Arsenate

Schwertmannite effectively sorbs chromate (Cr(VI)), yet the sorption mechanisms remain elusive. We determined the Cr(VI) sorption mechanisms on schwertmannite at pH 3.2 and 5 using combined macroscopic sorption experiments with molecularscale characterization and by comparing them to arsenate (As(V)) sorption. Cr(VI) adsorbs as bidentate-binuclear (BB) inner-sphere complexes through exchanging more sulfate and less >Fe–OH/OH 2 , with 0.59–0.71 sulfate released per Cr(VI) sorbed. While As(V) also forms BB complexes, it exchanges sulfate and >Fe–OH/OH 2 equally with 0.49–0.52 sulfate released per As(V) sorbed. At high As(V) loadings, As(V) precipitates as amorphous FeAsO 4 , particularly at low pH. The abovementioned differences between Cr(VI) and As(V) can be related to their different ionic radii and binding strength. Moreover, Cr(VI) and As(V) preferentially exchange sulfate innersphere complexes, increasing the proportion of sulfate outer-sphere complexes in schwertmannite. In turn, the concentration of sulfate outer-sphere complexes increases and then decreases with increasing Cr(VI) loading. Results suggest that an oxyanion, which would form inner-sphere complexes on a mineral surface, preferentially exchanges inner-spherically bound oxyanions than outerspherically bound ones on the surface, even though both are exchanged. Furthermore, this study improves our understanding of the sorption of oxyanions on schwertmannite and their capabilities to template schwertmannite formation and stabilize its structure.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRSDate not supplied

Degradation of Carbon Fiber Microstructures Due to Oxidative Etch Pitting

In order to understand the influence of etch pits on the material properties of carbon fiber microstructures, we use the Porous Microstructure Analysis (PuMA) software to create realistic pitted structures from virgin fiber structures and then analyze their degradation as the degree of pitting increases. For that purpose, we developed a pitting module within PuMA that creates pits with user-defined geometry (shape, size) and distribution (defect density) on the surface of arbitrary microstructures. In this work, we consider FiberForm microstructures, which are commonly used as the base material for ablative thermal protection systems (TPS). Using the new pitting module, we mimic the evolution of etch pits on FiberForm as it occurs from oxidation in ablative heating environments, by first importing the virgin FiberForm structure from a micrograph scan and then imposing different pitting conditions by varying pit radii and defect densities. We then leverage PuMA’s capabilities to calculate material properties for each structure. The results clearly show the degradation of thermal conductivity and structural integrity as etch pits grow, and furthermore highlight the complex evolution of the surface topology, which results in significant changes of the flowgeometry and chemical gas-surface interactions. Furthermore, a comparison of these changes with the case of shrinking fibers, which has heretofore been the standard for modelling ablation of carbon structures, yields significant differences. For example, we observe the formation of small chunks of fibers as pits grow in size, which could be released into the surrounding flow environment as spallation particles. This motivates us to continue our efforts of modelling pitting as an integral part of the structural degradation of carbon fiber structures in oxidation environments, which will ultimately improve our understanding of failure mechanisms in those materials.

PuMA↗
NASA NTRSDate not supplied

Degradation of Carbon Fiber Microstructures Due to Oxidative Etch Pitting

In order to understand the influence of etch pits on the material properties of carbon fiber microstructures, we use the Porous Microstructure Analysis (PuMA) software to create realistic pitted structures from virgin fiber structures and then analyze their degradation as the degree of pitting increases. For that purpose, we developed a pitting module within PuMA that creates pits with user-defined geometry (shape, size) and distribution (defect density) on the surface of arbitrary microstructures. In this work, we consider FiberForm microstructures, which are commonly used as the base material for ablative thermal protection systems (TPS). Using the new pitting module, we mimic the evolution of etch pits on FiberForm as it occurs from oxidation in ablative heating environments, by first importing the virgin FiberForm structure from a micrograph scan and then imposing different pitting conditions by varying pit radii and defect densities. We then leverage PuMA’s capabilities to calculate material properties for each structure. The results clearly show the degradation of thermal conductivity and structural integrity as etch pits grow, and furthermore highlight the complex evolution of the surface topology, which results in significant changes of the flowgeometry and chemical gas-surface interactions. Furthermore, a comparison of these changes with the case of shrinking fibers, which has heretofore been the standard for modelling ablation of carbon structures, yields significant differences. For example, we observe the formation of small chunks of fibers as pits grow in size, which could be released into the surrounding flow environment as spallation particles. This motivates us to continue our efforts of modelling pitting as an integral part of the structural degradation of carbon fiber structures in oxidation environments, which will ultimately improve our understanding of failure mechanisms in those materials.

PuMA↗
DOE OSTI2019

Multicritical Fermi Surface Topological Transitions

A wide variety of complex phases in quantum materials are driven by electron-electron interactions, which are enhanced through density of states peaks. A well-known example occurs at van Hove singularities where the Fermi surface undergoes a topological transition. Here we show that higher order singularities, where multiple disconnected leaves of Fermi surface touch all at once, naturally occur at points of high symmetry in the Brillouin zone. Such multicritical singularities can lead to stronger divergences in the density of states than canonical van Hove singularities, and critically boost the formation of complex quantum phases via interactions. Further, as a concrete example of the power of these Fermi surface topological transitions, we demonstrate how they can be used in the analysis of experimental data on Sr 3 Ru 2 O 7 . Understanding the related mechanisms opens up new avenues in material design of complex quantum phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1996

Spray Combustion Modeling with VOF and Finite-Rate Chemistry

A spray atomization and combustion model is developed based on the volume-of-fluid (VOF) transport equation with finite-rate chemistry model. The gas-liquid interface mass, momentum and energy conservation laws are modeled by continuum surface force mechanisms. A new solution method is developed such that the present VOF model can be applied for all-speed range flows. The objectives of the present study are: (1) to develop and verify the fractional volume-of-fluid (VOF) cell partitioning approach into a predictor-corrector algorithm to deal with multiphase (gas-liquid) free surface flow problems; (2) to implement the developed unified algorithm in a general purpose computational fluid dynamics (CFD) code, Finite Difference Navier-Stokes (FDNS), with droplet dynamics and finite-rate chemistry models; and (3) to demonstrate the effectiveness of the present approach by simulating benchmark problems of jet breakup/spray atomization and combustion. Modeling multiphase fluid flows poses a significant challenge because a required boundary must be applied to a transient, irregular surface that is discontinuous, and the flow regimes considered can range from incompressible to highspeed compressible flows. The flow-process modeling is further complicated by surface tension, interfacial heat and mass transfer, spray formation and turbulence, and their interactions. The major contribution of the present method is to combine the novel feature of the Volume of Fluid (VOF) method and the Eulerian/Lagrangian method into a unified algorithm for efficient noniterative, time-accurate calculations of multiphase free surface flows valid at all speeds. The proposed method reformulated the VOF equation to strongly couple two distinct phases (liquid and gas), and tracks droplets on a Lagrangian frame when spray model is required, using a unified predictor-corrector technique to account for the non-linear linkages through the convective contributions of VOF. The discontinuities within the sharp interface will be modeled as a volume force to avoid stiffness. Formations of droplets, tracking of droplet dynamics and modeling of the droplet breakup/evaporation, are handled through the same unified predictor-corrector procedure. Thus the new algorithm is non-iterative and is flexible for general geometries with arbitrarily complex topology in free surfaces. The FDNS finite-difference Navier-Stokes code is employed as the baseline of the current development. Benchmark test cases of shear coaxial LOX/H2 liquid jet with atomization/combustion and impinging jet test cases are investigated in the present work. Preliminary data comparisons show good qualitative agreement between data and the present analysis. It is indicative from these results that the present method has great potential to become a general engineering design analysis and diagnostics tool for problems involving spray combustion.

Chen, Yen-Sen↗
NASA NTRSDate not supplied

Uncrewed Lunar Surface Operations and Support Activities

This presentation summarizes the contents of the uncrewed lunar surface operations and support activities paper. It outlines the functions, features, and capabilities that support sustained human and robotic surface operations. It summarizes the complexities associated with the development and operation of autonomous systems and discusses a simulation tool for integrated surface operations planning.

Lunar↗
DOE OSTI2018

Fast Ultrasonic Imaging with Total Focusing Method (TFM) for Inspection of Additively Manufactured Polymer Composite Component

Ultrasonic adaptive imaging based on the phased-array technology and the synthetic focusing algorithm Total Focusing Method (TFM) is proposed for fast ultrasonic nondestructive evaluation of additively manufactured composite materials. Nondestructive evaluation and inspection of additively manufactured parts and components are necessary for quality assurance of the materials. Effective detection of defects and anomalies in manufactured parts prevents extra cost and production time. However, there are several limitations encountered when using conventional methods of nondestructive inspection for as built additively manufactured parts due to surface conditions and geometrical complexity. Post-processing operations, such as machining, are usually needed to detect possible defects such as layer disband, micro-cracks, and voids in the composite parts. The capability of aperture focusing in phased array ultrasonic methods provides the opportunity for the adjustment of the delay laws in ultrasonic beams and reduces the noise and beam distortion for better imaging. An additively manufactured carbon fiber reinforced Acrylonitrile Butadiene Styrene (ABS) composite sample with artificial side and bottom-drilled holes of different sizes, used to represent defects, was successfully inspected using the Total Focusing Method (TFM). Unlike conventional ultrasonic techniques, results show a promising way to provide inspection of as built additively manufactured composite parts with rough surface finishes. The proposed method helps to decrease inspection time and eliminate extra machining and preparation costs.

Taheri, Hossein↗
DOE OSTI2019

Interparticle Interactions in Dilute Solutions of Polyelectrolyte Complex Micelles.

The application of dilute solutions of poly electrolyte complex (PEC) micelles for delivering therapeutic nucleic acids into disease sites has gained momentum. This Letter reports a detailed characterization of PEC micelles in dilute solutions including their internal structures and the determination of the interparticle interactions. The polymer concentration ranges from 0.1 to 0.5 wt %, a regime where micelle-micelle interactions are infrequent. We employ synchrotron small-angle X-ray scattering (SAXS) to simultaneously probe the morphology, internal structure, and radius of gyration (R-g) of the self-assemblies formed by charged diblock polyelectrolytes and homopolyelectrolytes. The emerging appearance of the structure factor in SAXS profiles with the increasing polymer concentration demonstrates the presence of the repulsive intermicellar correlations, which is further confirmed by the differences between the "reciprocal R-g" estimated by Guinier approximation and the "real space R-g" determined by pair distribution functions. We find that the soft corona chains tethered on the surface of phase-separated complex domains are compressed when micelles come close to the point where a hard-sphere interaction takes over. These findings contribute to the fundamental understanding of the structure and space-filling constraints in the complexation-driven self-assemblies and advance the rational design of cationic polymer-based nonviral gene delivery vectors.

Wu, Hao↗
DOE OSTI2019

Probing the Dissociation of Protein Complexes by Means of Gas-Phase H/D Exchange Mass Spectrometry

Gas-phase hydrogen/deuterium exchange measured by mass spectrometry (gas-phase HDX-MS) is a fast method to probe the conformation of protein ions. The use of gas-phase HDX-MS to investigate the structure and interactions of protein complexes is however mostly unharnessed. Ionizing proteins under conditions that maximize preservation of their native structure (native MS) enables the study of solution-like conformation for milliseconds after electrospray ionization (ESI), which enables the use of ND{sub 3}-gas inside the mass spectrometer to rapidly deuterate heteroatom-bound non-amide hydrogens. Here, we explored the utility of gas-phase HDX-MS to examine protein-protein complexes and inform on their binding surface and the structural consequences of gas-phase dissociation. Protein complexes ranging from 24 kDa dimers to 395 kDa 24mers were analyzed by gas-phase HDX-MS with subsequent collision-induced dissociation (CID). The number of exchangeable sites involved in complex formation could, therefore, be estimated. For instance, dimers of cytochrome c or α-lactalbumin incorporated less deuterium/subunit than their unbound monomer counterparts, providing a measure of the number of heteroatom-bound side-chain hydrogens involved in complex formation. We furthermore studied if asymmetric charge-partitioning upon dissociation of protein complexes caused intermolecular H/D migration. In larger multimeric protein complexes, the dissociated monomer showed a significant increase in deuterium. This indicates that intermolecular H/D migration occurs as part of the asymmetric partitioning of charge during CID. We discuss several models that may explain this increase deuterium content and find that a model where only deuterium involved in migrating charge can account for most of the deuterium enrichment observed on the ejected monomer. In summary, the deuterium content of the ejected subunit can be used to estimate that of the intact complex with deviations observed for large complexes accounted for by charge migration. .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2007

Probabilistic Thermal Analysis During Mars Reconnaissance Orbiter Aerobraking

A method for performing a probabilistic thermal analysis during aerobraking has been developed. The analysis is performed on the Mars Reconnaissance Orbiter solar array during aerobraking. The methodology makes use of a response surface model derived from a more complex finite element thermal model of the solar array. The response surface is a quadratic equation which calculates the peak temperature for a given orbit drag pass at a specific location on the solar panel. Five different response surface equations are used, one of which predicts the overall maximum solar panel temperature, and the remaining four predict the temperatures of the solar panel thermal sensors. The variables used to define the response surface can be characterized as either environmental, material property, or modeling variables. Response surface variables are statistically varied in a Monte Carlo simulation. The Monte Carlo simulation produces mean temperatures and 3 sigma bounds as well as the probability of exceeding the designated flight allowable temperature for a given orbit. Response surface temperature predictions are compared with the Mars Reconnaissance Orbiter flight temperature data.

Dec, John A.↗
DOE OSTI2024

Role of Dynamic Polarization Interactions in the Electrical Double Layer at Calcite (104) Interfaces with Aqueous Solutions

Reactions at mineral interfaces with aqueous solutions control many geochemical and biogeochemical processes in the Earth’s critical zone. At the molecular level, insights into important properties such as the structure of the electrical double layer (EDL) at specific mineral interfaces continue to improve due to the increasing fidelity of laboratory instrumentation and computational approaches. However, molecular simulation approaches suffer from limited reach into relevant scales of time, length, and system complexity. To span this gap, a novel hybrid approach that couples first principle plane-wave density functional theory (DFT) with classical DFT (cDFT) is demonstrated and applied to calcite (104) interfaces with various electrolytes. In this approach, a region of interest described using DFT interacts with the surrounding medium described using cDFT to arrive at a self-consistent ground state. Benchmarking against experimental observations and entirely first principle DFT simulations demonstrates that this hybrid model efficiently encompasses the key short-range and collective interactions in the EDL. Simulations of calcite (104)/solution interfaces reveal the key static and dynamic polarization interactions that give rise to structuring of ions and water. Ion hydration interactions have the strongest effect on the depth of the first minimum in the density distribution of counterions at the surface, and the position and width of the first density peak is largely determined by the strength of ion-correlation forces. Finer details of ion distributions are controlled by mutual polarization of the calcite surface and interfacial electrolyte. Finally, this new ability to efficiently and rigorously predict EDL structure at mineral surfaces in contact with complex solutions paves the way to accurately modeling sorption, nucleation, dissolution, and growth in realistic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Recovery of Rare Earth Elements from Geothermal Fluids through Bacterial Cell Surface Adsorption

The increasing demand for rare earth elements (REEs) in the modern economy motivates the development of novel strategies for cost-effective REE recovery from nontraditional feedstocks. We previously engineered E. coli to express lanthanide binding tags on the cell surface, which increased the REE biosorption capacity and selectivity. Here we examined how REE adsorption by the engineered E. coli is affected by various geochemical factors relevant to geothermal fluids, including total dissolved solids (TDS), temperature, pH, and the presence of specific competing metals. REE biosorption is robust to TDS, with high REE recovery efficiency and selectivity observed with TDS as high as 165,000 ppm. Among several metals tested, U, Al, and Pb were found to be the most competitive, causing >25% reduction in REE biosorption when present at concentrations ~3- to 11-fold higher than the REEs. Optimal REE biosorption occurred between pH 5-6, and sorption capacity was reduced by ~65% at pH 2. REE recovery efficiency and selectivity increased as a function of temperature up to ~70 °C due to the thermodynamic properties of metal complexation on the bacterial surface. Ultimately, these data define the optimal and boundary conditions for biosorption and demonstrate its potential utility for selective REE recovery from geofluids.

58 GEOSCIENCES↗
NASA NTRS2004

A Versatile Platform for Nanotechnology Based on Circular Permutation of a Chaperonin Protein

A number of protein complexes have been developed as nanoscale templates. These templates can be functionalized using the peptide sequences that bind inorganic materials. However, it is difficult to integrate peptides into a specific position within a protein template. Integrating intact proteins with desirable binding or catalytic activities is an even greater challenge. We present a general method for modifying protein templates using circular permutation so that additional peptide sequence can be added in a wide variety of specific locations. Circular permutation is a reordering of the polypeptide chain such that the original termini are joined and new termini are created elsewhere in the protein. New sequence can be joined to the protein termini without perturbing the protein structure and with minimal limitation on the size and conformation of the added sequence. We have used this approach to modify a chaperonin protein template, placing termini at five different locations distributed across the surface of the protein complex. These permutants are competent to form the double-ring structures typical of chaperonin proteins. The permuted double-rings also form the same assemblies as the unmodified protein. We fused a fluorescent protein to two representative permutants and demonstrated that it assumes its active structure and does not interfere with assembly of chaperonin double-rings.

Paavola, Chad↗