Search NASA⌕ Search

SEARCH · Search NASA

Results for “value analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48

Status of Solar Measurements and Data Reduction for Erb-nimbus 7

The status of the Total Solar Irradiance data obtained using the cavity radiometer aboard the Earth Radiation Budget experiment of the Nimbus 7 satellite is described. The ERB experiment has a number of sensors which measure the radiative fluxes (both shortwave and infrared) leaving the Earth as well as the solar channels. The complexity of the processing of the Earth-flux data, both wide and narrow angle has necessitated a reprocessing effort which produces the final data. Since the solar data is embedded in the same data stream and tape product as the Earth-flux data, it was not generally available in a format convenient for analysis as a separate product. Values for the final data product only are presented and a few remarks concerning the basic features of the data. There is no scientific conclusions presented here other than those directly related to the measurement results. A set of tabulated values is appended.

Hickey, J. R.↗

Gamma rays from atomic and molecular gas in the large complex of clouds in Orion and Monoceros

A comparison of COS-B gamma-ray observations of the large complex of interstellar clouds in Orion and Monoceros with the Columbia CO and Berkeley H I surveys of this region reveals a good correlation between gamma-ray emission and total gas distribution. The observed gamma-ray emission is explainable in terms of interactions of cosmic rays that are uniformly distributed in this region with the interstellar gas. The correlation is used as the basis of a calibration of the ratio between H2 column density and the integrated CO line intensity; the value of (2.6 + or - 1.2) X 10 to the 20th mol/sq cm K km s thereby obtained is consistent with the value derived from a similar analysis for the inner galaxy.

Bloemen, J. B. G. M.↗

A method to dramatically improve subcarrier tracking

A method is presented for achieving a dramatic improvement in phase tracking of square wave subcarriers or other square waves. The method is to set the amplitude of the phase quadrature reference signal to zero except near the zero crossings of the input signal. Without changing the loop bandwidth, the variance of the phase error can be reduced to approximately W sigma(sub 0)(2), were sigma (sub 0)(2) is the phase error variance without windowing, and W is the fraction of cycle in which the reference signal has a nonzero value. Simulation results confirm the analysis and establish minimum W versus signal-to-noise ratio. Typically, the window can be made so narrow as to achieve a phase error variance of 1.5 sigma(sub 0)(4).

Hurd, W. J.↗

Improving the geological interpretation of magnetic and gravity satellite anomalies

Quantitative analysis of the geologic component of observed satellite magnetic and gravity fields requires accurate isolation of the geologic component of the observations, theoretically sound and viable inversion techniques, and integration of collateral, constraining geologic and geophysical data. A number of significant contributions were made which make quantitative analysis more accurate. These include procedures for: screening and processing orbital data for lithospheric signals based on signal repeatability and wavelength analysis; producing accurate gridded anomaly values at constant elevations from the orbital data by three-dimensional least squares collocation; increasing the stability of equivalent point source inversion and criteria for the selection of the optimum damping parameter; enhancing inversion techniques through an iterative procedure based on the superposition theorem of potential fields; and modeling efficiently regional-scale lithospheric sources of satellite magnetic anomalies. In addition, these techniques were utilized to investigate regional anomaly sources of North and South America and India and to provide constraints to continental reconstruction. Since the inception of this research study, eleven papers were presented with associated published abstracts, three theses were completed, four papers were published or accepted for publication, and an additional manuscript was submitted for publication.

Hinze, William J.↗

A method to dramatically improve subcarrier tracking

A method is presented for achieving a dramatic improvement in phase tracking of square wave subcarriers or other square waves. The method is to set the amplitude of the phase quadrature reference signal to zero except near the zero crossings of the input signal. Without changing the loop bandwidth, the variance of the phase error can be reduced to approximately W sigma(sub 0)(2), where sigma (sub 0)(2) is the phase error variance without windowing, and W is the fraction of cycle in which the reference signal has a nonzero value. Simulation results confirm the analysis and establish minimum W versus signal-to-noise ratio. Typically, the window can be made so narrow as to achieve a phase error variance of 1.5 sigma(sub 0)(4).

Hurd, William J.↗

Investigating relativity using lunar laser ranging - Geodetic precession and the Nordtvedt effect

The emplacement of retroreflectors on the moon by Apollo astronauts and the Russian Lunakhod spacecraft marked the inception of lunar laser ranging (LLR) and provided a natural laboratory for the study of general relativity. Continuing acquisition of increasingly accurate LLR data has provided enhanced sensitivity to general relativity parameters. Two relativistic effects are investigated in this paper: (1) the Nordtvedt effect, yielding a test of the strong equivalence principle, would appear as a distortion of the geocentric lunar orbit in the direction of the sun. The inclusion of recent LLR data limits the size of any such effect to 3 + or - 4 cm. The sensitivities to the various PPN quantities are also highlighted. (2) the geodetic precession of the lunar perigee is predicted by general relativity as a consequence of the motion of the earth-moon system about the sun; its theoretical magnitude is 19.2 mas/yr. Analysis presented here confirms this value and determines this quality to a 2 percent level.

Dickey, J. O.↗

Thin-walled composite beams under bending, torsional, and extensional loads

Symmetric and antisymmetric layup graphite-epoxy composite beams with thin-walled rectangular cross sections are fabricated using an autoclave molding technique and tested under bending, torsional, and extensional loads. The bending slope and elastic twist at a station are measured using an optical system, and the results correlated with predicted values from a simple beam analysis as well as a refined finite element analysis. A symmetric ply layup results in bending-twist coupling whereas an antisymmetric layup causes extension-twist coupling. Simple analytical results with plane-stress assumption agree better with measured data as well as finite element predictions than with plane-strain assumption. For symmetric layup beams, the bending-induced twist and torsion-induced bending slope are predicted satisfactorily using simple analytical solution. Correlations with measured data, however, are generally improved using a finite element solution. For antisymmetric beams, axial force-induced twist is predicted satisfactorily by both methods.

Chandra, Ramesh↗

Land surface parameterization for regional surface heat transfer in hilly grassland

Radiometrically obtained surface temperature data and wind and temperature data from the atmospheric boundary layer are analyzed to determine the regional surface-heat flux. Monin-Obukhov similarity theory is employed to analyze the wind speed and the relationship between the surface potential temperature and the potential temperature. The radiometric scalar roughness is considered and found to be related to solar elevation and canopy height, although the regional sensible heat flux derived by the similarity theory analysis agrees with measured flux values.

Sugita, Michiaki↗

Analysis of delamination onset and growth in curved laminates

Delamination onset and growth from a matrix crack in a curved composite laminate are studied. Finite element analysis is used to determine values of G which can be compared to the interlaminar fracture toughness of the composite for delamination predictions. The delamination is assumed to grow from the matrix crack and to remain straight and perpendicular to the edge. G is larger at the free edge than in the center and increases with delamination growth. Thus, once delamination begins from the matrix crack it should continue around the curved section with no increase in applied load. In the local vicinity of the matrix crack the rate of change of G decreases initially and then begins to increase with a point of inflection in between. Measured failure loads and the interlaminar fracture toughness of the composite are used to show that the point of inflection corresponds to the critical value of G.

Martin, Roderick H.↗

Direct tension experiments on compacted granular materials

The objective of this experiment is to determine the level of tensile strength of uncemented, dry, granular materials. The experimental apparatus does not lend itself to a direct measurement of the material's tensile strength, but must be analyzed as a stress field problem in order to arrive at a tensile strength value. The experiment, and subsequent analysis, serve to instruct the student on the influence of gravitationally induced stresses in frictional granular materials, the importance and difficulty of accurately describing the entire failure envelope for granular materials in the low mean stress range, and the fundamental principles of material modeling.

Perkins, Steven W.↗

Dominant modes via model error

Obtaining a reduced model of a stable mechanical system with proportional damping is considered. Such systems can be conveniently represented in modal coordinates. Two popular schemes, the modal cost analysis and the balancing method, offer simple means of identifying dominant modes for retention in the reduced model. The dominance is measured via the modal costs in the case of modal cost analysis and via the singular values of the Gramian-product in the case of balancing. Though these measures do not exactly reflect the more appropriate model error, which is the H2 norm of the output-error between the full and the reduced models, they do lead to simple computations. Normally, the model error is computed after the reduced model is obtained, since it is believed that, in general, the model error cannot be easily computed a priori. The authors point out that the model error can also be calculated a priori, just as easily as the above measures. Hence, the model error itself can be used to determine the dominant modes. Moreover, the simplicity of the computations does not presume any special properties of the system, such as small damping, orthogonal symmetry, etc.

Yousuff, A.↗

Critical combinations of shear and direct axial stress for curved rectangular panels

A solution is presented for the problem of the buckling of curved rectangular panels subjected to combined shear and direct axial stress. Charts giving theoretical critical combinations of shear and direct axial stress are presented for panels having five different length-width ratios. Because the actual critical compressive stress of rectangular panels having substantial curvature is known to be much lower than the theoretical value, a semiempirical method of analysis of curved panels subjected to combined shear and direct axial stress is presented for use in design. (author

PLATES - STRESSES, SHEARING CURVED↗

Diagrams of airplane stability

In this report a study is made of the effect on longitudinal and lateral oscillations of an airplane of simultaneous variations in two resistance derivatives while the remainder of the derivatives are constant. The results are represented by diagrams in which the two variable resistance derivatives are used as coordinates, and curves are plotted along which the modulus of decay of a long oscillation has a constant value. The same type of analysis is also carried out for the stability of the parachute. In discussing the stability of the helicopter it is concluded that the gyroscopic effect on stability will be greater than in the case of the airplane.

Batemen, H↗

Compression for an effective management of telemetry data

A Technological DataBase (T.D.B.) records all the values taken by the physical on-board parameters of a satellite since launch time. The amount of temporal data is very large (about 15 Gbytes for the satellite TDF1) and an efficient system must allow users to have a fast access to any value. This paper presents a new solution for T.D.B. management. The main feature of our new approach is the use of lossless data compression methods. Several parametrizable data compression algorithms based on substitution, relative difference and run-length encoding are available. Each of them is dedicated to a specific type of variation of the parameters' values. For each parameter, an analysis of stability is performed at decommutation time, and then the best method is chosen and run. A prototype intended to process different sorts of satellites has been developed. Its performances are well beyond the requirements and prove that data compression is both time and space efficient. For instance, the amount of data for TDF1 has been reduced to 1.05 Gbytes (compression ratio is 1/13) and access time for a typical query has been reduced from 975 seconds to 14 seconds.

Arcangeli, J.-P.↗

The Kinetic Nonequilibrium Processes in the Internal Flow and in the Plume of Subsonic and Supersonic Aircrafts

(1) Our results show that under combustion of thermal destruction products of n-C8H18, and other hydrocarbon fuels with air at the equivalent ratio -0.5 and less the chemical equilibrium is not realized at the exit plane of combustion chamber and in the gas turbine and nozzle for most of small components such as NO2, NO3, HNO, HNO2, HNO3, N(x)H(y), HO2, OH. The chemical equilibrium is not realized in the internal flow of ramjet hydrogen combustion engine too. So at the nozzle exit plane both of gas-turbine hydrocarbon combustion engine and of ramjet hydrogen combustion engine the relatively large values of concentration of such small components as NO3, HNO2, N2O, HNO3, HNO, NH, N2H, HO2, H2O2 may be realized. The exact definition of these component concentration as well as concentration of NO(x), OH, SO2, O, H, H2, H2O at the nozzle exit plane is very important for plume chemistry. (2) The results which were obtained for subsonic and hypersonic aircrafts indicate on the considerable change of the composition of the gas mixture along the plume. This change can be caused not only by the mixture of combustion products with the atmosphere air but by proceeding of whole complex of nonequilibrium photochemical reactions. The photodissociation processes begin to influence on the formation of the free atoms and radicals at flight altitude H greater than or equal to 18 km. Neglect of these processes can result in essential (up to 10(exp 4) times) mistakes of values gamma(sub OH), gamma(sub O), gamma(sub H), gamma(sub HSO3) and some products of CFC's disintegration. It was found that penetration of Cl-containing species from the atmosphere into the exhaust flow and its interaction with nitrogen oxides leads to essential increasing of the concentration of Cl, Cl2, ClO2, ClNO3, CH3Cl and sometimes HCl and the decreasing of ClO concentration by comparison with background values. The results of our analysis show that the plume aircraft with both hydrocarbon and hydrogen combustion engine may be source of various pollutant components such as HNO, HNO4,ClO2, CH3NO2, CH3NO3, CH2O, Cl, H2O2, but not only NO, NO2, HNO2, HNO3, N2O5, SO2, SO3, H2SO4 as it was supposed before.

Starik, Alexander M.↗

A Broad-band Spectral and Timing Study of the X-Ray Binary System Centaurus X-3

This dissertation describes a multi-mission investigation of the high mass X-ray binary pulsar Centaurus X-3. Cen X-3 was observed with the Broad Band X-Ray Telescope (BBXRT) in December 1990. This was the first high-resolution solid state X-ray spectrometer to cover the iron K fluorescence region. The Fe K emission feature was resolved into two components for the first time. A broad 6.7 keV feature was found to be a blend of lines from Fe XXI-Fe XXVI with energies ranging from 6.6 to 6.9 keV due to photoionization of the companion's stellar wind. A narrow line at 6.4 keV due to fluorescence of iron in relatively low ionization states was also found. The quasi-periodic oscillations (QPO) at about 40 mHz were used to estimate the surface magnetic field of Cen X-3 as approx. 2.6 x 10(exp 12) G and to predict that there should be a cyclotron scattering resonance absorption feature (CSRF) near 30 keV. In order to further resolve the iron line complex and to investigate the pulse-phase dependence of the iron line intensities, Cen X-3 was observed with the Advanced Satellite for Cosmology and Astrophysics (ASCA). Using ASCA's state-of-the-art non-dispersive X-ray spectrometers the 6.4 keV fluorescent iron line was found to be pulsing while the intensities of the 6.7 and 6.9 keV recombination lines do not vary with pulse phase. This confirms that the 6.4 keV line is due to reflection by relatively neutral matter close to the neutron star while the recombination lines originate in the extended stellar wind. The continuum spectrum was found to be modified by reflection from matter close to the neutron star. Observations with the EXOSAT GSPC were used to search for a CSRF. The EXOSAT spectra were consistent with the presence of a CSRF but an unambiguous detection was not possible because of a lack of sensitivity at energies higher than the cyclotron energy. Cen X-3 was then observed with the Rossi X-Ray Timing Explorer (RXTE) and evidence for a CSRF at 25.1 +/- 0.3 keV was found. This corresponds to a magnetic field of (2.16 +/- 0.03) X 10(exp 12) G and is consistent with the value obtained from the QPO analysis.

Audley, Michael Damian↗

Utilization of Satellite Data in Land Surface Hydrology: Sensitivity and Assimilation

This paper investigates the sensitivity of potential evapotranspiration to input meteorological variables, viz- surface air temperature and surface vapor pressure. The sensitivity studies have been carried out for a wide range of land surface variables such as wind speed, leaf area index and surface temperatures. Errors in the surface air temperature and surface vapor pressure result in errors of different signs in the computed potential evapotranspiration. This result has implications for use of estimated values from satellite data or analysis of surface air temperature and surface vapor pressure in large scale hydrological modeling. The comparison of cumulative potential evapotranspiration estimates using ground observations and satellite observations over Manhattan, Kansas for a period of several months shows very little difference between the two. The cumulative differences between the ground based and satellite based estimates of potential evapotranspiration amounted to less that 20mm over a 18 month period and a percentage difference of 15%. The use of satellite estimates of surface skin temperature in hydrological modeling to update the soil moisture using a physical adjustment concept is studied in detail including the extent of changes in soil moisture resulting from the assimilation of surface skin temperature. The soil moisture of the surface layer is adjusted by 0.9mm over a 10 day period as a result of a 3K difference between the predicted and the observed surface temperature. This is a considerable amount given the fact that the top layer can hold only 5mm of water.

Lakshmi, Venkataraman↗

Large Scale Characteristics and Variability of the Global Sea Ice Cover

More than two decades of satellite passive microwave data are used to study and evaluate the large scale characteristics and the changing state of the sea ice cover in both the Northern and Southern Hemispheres. Satellite data provide day/night almost continuous observation of global sea ice cover thereby enabling quantitative variability studies at various time scales. Despite coarse sensor resolution, spatial detail is provided through the use of sea ice concentrations which are derived using an algorithm that determines the fraction of ice and open water within each satellite footprint. Large seasonal fluctuations in the extent are apparent with those of the Southern Hemisphere having larger amplitudes but less symmetrical seasonal distribution than those of the Northern Hemisphere. The large scale interannual variability of the ice cover has been evaluated globally as well as regionally and in the Northern Hemisphere, the yearly anomaly maps show a predominance of positive values in the 1980s and negative values in the 1990s. Regression analysis show that the ice extent and ice area are on a decline at the rate of -2.0 +/- 0.5% and -3.1 +/- 0.3% per decade, respectively, in the Northern Hemisphere but there are regions like the Bering Sea with positive trends. What is intriguing, however, is that the perennial sea ice cover has been declining at a much faster rate than for the entire hemisphere, i.e., 6.7 +/- 2.4% and 8.3 +/- 2.4 % per decade for ice extent and ice area, respectively. The perennial ice cover consists mainly of thick multiyear ice floes, and its persistent decline would mean a reduction in the average thickness of sea ice and a change in the overall characteristics of the Arctic sea ice cover. Furthermore, the yearly anomaly patterns are coherent with those of surface temperatures derived from 19 years of thermal infrared AVHRR data. The latter also shows that in consolidated ice regions, the average temperature during summer minima has been increasing at about 0.9 +/- 0.6 K per decade.

Comiso, Josefino C.↗