Search NASA⌕ Search

SEARCH · Search NASA

Results for “Band structure methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Half-Heusler topological insulators: A first-principles study with the Tran-Blaha modified Becke-Johnson density functional

We systematically investigate the topological band structures of half-Heusler compounds using first- principles calculations. The modified Becke-Johnson exchange potential together with local-density approxi- mation for the correlation potential MBJLDA has been used here to obtain accurate band inversion strength and band order. Our results show that a large number of half-Heusler compounds are candidates for three- dimensional topological insulators. The difference between band structures obtained using the LDA and MB- JLDA potential is also discussed.

36 MATERIALS SCIENCE↗

Preparation, characterization and electronic structures of Fe-doped TiO{sub 2} nanostructured fibers

Graphical abstract: - Highlights: • Mesoporous Fe-doped TiO{sub 2} fibers were prepared on a large scale by sol–gel method. • Fe-doping greatly enhance the visible-light photocatalytic activity of TiO{sub 2} fibers. • First-principle study the effects of different replaced sites on the absorption edge and band gap. - Abstract: Mesoporous and nanostructured Fe-doped TiO{sub 2} fibers were fabricated on a large scale by sol–gel method combined with the polyorganotitanium as the precursor and ferric nitrate as dopant. The prepared fibers were characterized by XRD, XPS, SEM, TEM, N{sub 2} adsorption–desorption isotherms and UV–vis spectroscopy. The photocatalytic activity was evaluated by photodegradation of methyl orange (MO) aqueous solution under UV and visible-light irradiation. Compared with different types of photocatalysts, the 0.5%Fe-doped TiO{sub 2} fibers exhibit super photocatalytic activity. This is ascribed to the fact that the Fe-doping induces the shift of the absorption edge into the visible-light range with the narrowing of the band gap and reduces the recombination of the photo-generated electrons and holes. Furthermore, first-principle study for their electronic structures was carried out to confirm the effects of different replaced lattice sites on the red shift of the absorption edge and the changes of the band gap of the Fe-doped TiO{sub 2} fibers.

36 MATERIALS SCIENCE↗

Modeling of joints for the dynamic analysis of truss structures

An experimentally-based method for determining the stiffness and damping of truss joints is described. The analytical models use springs and both viscous and friction dampers to simulate joint load-deflection behavior. A least-squares algorithm is developed to identify the stiffness and damping coefficients of the analytical joint models from test data. The effects of nonlinear joint stiffness such as joint dead band are also studied. Equations for predicting the sensitivity of beam deformations to changes in joint stiffness are derived and used to show the level of joint stiffness required for nearly rigid joint behavior. Finally, the global frequency sensitivity of a truss structure to random perturbations in joint stiffness is discussed.

Belvin, W. Keith↗

Experimental and first principle studies on electronic structure of BaTiO{sub 3}

We have carried out photoemission experiments to obtain valence band spectra of various crystallographic symmetries of BaTiO{sub 3} system which arise as a function of temperature. We also present results of a detailed first principle study of these symmetries of BaTiO{sub 3} using generalized gradient approximation for the exchange-correlation potential. Here we present theoretical results of density of states obtained from DFT based simulations to compare with the experimental valence band spectra. Further, we also perform calculations using post density functional approaches like GGA + U method as well as non-local hybrid exchange-correlation potentials like PBE0, B3LYP, HSE in order to understand the extent of effect of correlation on band gaps of different available crystallographic symmetries (5 in number) of BaTiO{sub 3}.

36 MATERIALS SCIENCE↗

Tight-binding study of beryllium

In this work, we have applied the Naval Research Laboratory Tight-binding (NRL-TB) Method to the hcp alkaline-earth metal Beryllium. This approach consists of fitting to energy band and total energy data generated by the Linearized Augmented Plane Wave (LAPW) for the fcc, bcc, sc, and hcp structures as a function of volume. First, we found that using the Generalized Gradient Approximation (GGA) for the input data secures a better agreement to experimental volumes than the LDA. Second, we found that including small volumes to the fit is needed to get TB parameters that are transferable enough to successfully predict the energies of structures that were not fitted, and to perform molecular dynamics (MD) simulations. The non-orthogonal Hamiltonian obtained, is successful in correctly predicting the hcp lattice as the ground state of Be and finding eight other structures, that were not fitted to LAPW, positioned at higher energies. In addition, the NRL-TB produces accurate energy bands, densities of states, elastic constants, the Bain path and several quantities derived from MD simulations.

36 MATERIALS SCIENCE↗

Terbium luminescence in alumina xerogel fabricated in porous anodic alumina matrix under various excitation conditions

Terbium-doped alumina xerogel layers are synthesized by the sol-gel method in pores of a porous anodic alumina film 1 {mu}m thick with a pore diameter of 150-180 nm; the film is grown on a silicon substrate. The fabricated structures exhibit terbium photoluminescence with bands typical of trivalent terbium terms. Terbium X-ray luminescence with the most intense band at 542 nm is observed for the first time for such a structure. Morphological analysis of the structure by scanning electron microscopy shows the presence of xerogel clusters in pore channels, while the main pore volume remains unfilled and pore mouths remain open. The data obtained confirm the promising applications of fabricated structures for developing matrix converters of X-rays and other ionizing radiations into visible light. The possibilities of increasing luminescence intensity in the matrix converter are discussed.

36 MATERIALS SCIENCE↗

The Structure of Electronic States in FeSb{sub 2} According to Optical Spectroscopy and Band Calculations

The electronic structure and optical properties of a binary intermetallic FeSb{sub 2} compound are studied. The calculations of the band structure, that demonstrate the existence of a narrow ∼0.3 eV gap in the energy spectrum of this material, are performed in the approximation of a local electronic density. Spectral characteristics are studied by the ellipsometric method within a 0.22–18 μm range of wavelengths. It is shown that, in the region of interband transitions, the experimental optical conductivity of the compound is satisfactorily interpreted within the performed calculations of the density of electronic states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunneling calculations for GaAs-Al(x)Ga(1-x) as graded band-gap sawtooth superlattices

Quantum mechanical tunneling calculations for sawtooth (linearly graded band-gap) and step-barrier AlGaAs superlattices were performed by means of a transfer matrix method, within the effective mass approximation. The transmission coefficient and tunneling current versus applied voltage were computed for several representative structures. Particular consideration was given to effective mass variations. The tunneling properties of step and sawtooth superlattices show some qualitative similarities. Both structures exhibit resonant tunneling, however, because they deform differently under applied fields, the J-V curves differ.

Forrest, Kathrine A.↗

Sol-gel process for the manufacture of high power switches

According to one embodiment, a photoconductive semiconductor switch includes a structure of nanopowder of a high band gap material, where the nanopowder is optically transparent, and where the nanopowder has a physical characteristic of formation from a sol-gel process. According to another embodiment, a method includes mixing a sol-gel precursor compound, a hydroxy benzene and an aldehyde in a solvent thereby creating a mixture, causing the mixture to gel thereby forming a wet gel, drying the wet gel to form a nanopowder, and applying a thermal treatment to form a SiC nanopowder.

36 MATERIALS SCIENCE↗

Preparation and characterization of Al{sub 2x}In{sub 2−2x}O{sub 3} films deposited on MgO (1 0 0) by MOCVD

Highlights: • Ternary Al{sub 2x}In{sub 2−2x}O{sub 3} alloy films were deposited on MgO (1 0 0) by MOCVD. • The microstructure of the Al{sub 2x}In{sub 2−2x}O{sub 3} films were studied upon HRTEM. • Al{sub 2x}In{sub 2−2x}O{sub 3} alloy films exhibited great optical transparency in the visible wavelength range. • The band gap of the Al{sub 2x}In{sub 2−2x}O{sub 3} films can be modulated by controlling the Al contents in the samples. - Abstract: The ternary Al{sub 2x}In{sub 2−2x}O{sub 3} films with different compositions x[Al/(Al + In) atomic ratio] have been fabricated on the MgO (1 0 0) substrates by the metal organic chemical vapor deposition (MOCVD) method. The influence of different Al contents on the structural, optical and electrical properties of Al{sub 2x}In{sub 2−2x}O{sub 3} films has been studied. The structural studies reveal a change from single crystalline structure of cubic In{sub 2}O{sub 3} to amorphous as the Al content increases. The average transmittances of all samples in the visible range are over 80%. The optical band gap is observed to increase monotonically from 3.67 to 5.38 eV as the Al content increases from 0.1 to 0.9.

36 MATERIALS SCIENCE↗

Magnetotransport properties of the topological nodal-line semimetal CaCdSn

Topological nodal-line semimetals support protected band crossings, which form nodal lines or nodal loops between the valence and conduction bands and exhibit novel transport phenomena. Here we address the topological state of the nodal-line semimetal candidate material CaCdSn, and report magnetotransport properties of its single crystals grown by the self-flux method. In this work, our first-principles calculations show that the electronic structure of CaCdSn harbors a single nodal loop around the Γ point in the absence of spin-orbit coupling effects. The nodal crossings in CaCdSn are found to lie above the Fermi level and yield a Fermi surface that consists of both electron and hole pockets. CaCdSn exhibits high mobility (μ ≈ 3.44 × 10 4 cm 2 V –1 s –1 ) and displays a field-induced metal-semiconductor-like crossover with a plateau in resistivity at low temperature. We observe an extremely large and quasilinear nonsaturating transverse as well as longitudinal magnetoresistance (MR) at low temperatures (≈ 7.44 × 10 3 % and ≈ 1.71 × 10 3 %, respectively, at 4 K). We also briefly discuss possible reasons behind such a large quasilinear magnetoresistance and its connection with the nontrivial band structure of CaCdSn.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable all-angle negative refraction and photonic band gaps in two-dimensional plasma photonic crystals with square-like Archimedean lattices

In this paper, the tunable all-angle negative refraction and photonic band gaps (PBGs) in two types of two-dimensional (2D) plasma photonic crystals (PPCs) composed of homogeneous plasma and dielectric (GaAs) with square-like Archimedean lattices (ladybug and bathroom lattices) for TM wave are theoretically investigated based on a modified plane wave expansion method. The type-1 structure is dielectric rods immersed in the plasma background, and the complementary structure is named as type-2 PPCs. Theoretical simulations demonstrate that the both types of PPCs with square-like Archimedean lattices have some advantages in obtaining the higher cut-off frequency, the larger PBGs, more number of PBGs, and the relative bandwidths compared to the conventional square lattices as the filling factor or radius of inserted rods is same. The influences of plasma frequency and radius of inserted rod on the properties of PBGs for both types of PPCs also are discussed in detail. The calculated results show that PBGs can be manipulated by the parameters as mentioned above. The possibilities of all-angle negative refraction in such two types of PPCs at low bands also are discussed. Our calculations reveal that the all-angle negative phenomena can be observed in the first two TM bands, and the frequency range of all-angle negative refraction can be tuned by changing plasma frequency. Those properties can be used to design the optical switching and sensor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Use of Raman Spectroscopy and Methods of Quantum Chemistry for Assessing the Relative Concentration of Triglycerides of Oleic and Linoleic Acids in a Mixture of Olive Oil and Sunflower Seed Oil

The Raman spectra of five samples of sunflower seed oil and five samples of cold-pressed olive oil of various brands are recorded in the range of 500–2000 cm{sup –1}. Within the framework of the B3LYP/6-31G(d)/6-31G(d,p)/6-31+G(d,p)/6-311G(d)/6-311G(d, p)/6-311+G(d,p) methods, the structural models of eight fatty acids (oleic, linoleic, palmitic, stearic, α-linolenic, arachidonic, eicosapentaenoic, and docosahexaenoic) are constructed, and also within the framework of the B3LYP/6-31G(d) method, the structural models of triglycerides of the first four of the above acids are obtained. The vibrational wavenumbers and intensities in the IR and Raman spectra are calculated. The Raman spectra of olive oil and sunflower seed oil were simulated by using the supermolecular approach. We investigated the dependence of the relative intensity of the vibrational bands ν{sub exp} = 1660 and 1445 cm{sup –1} on the concentration of triglycerides in oils of oleic and linoleic acids and the dependence of the intensity of these bands on the degree of saturation of fatty acids. Experimental and empirical dependences are constructed to estimate the relative concentration of triglycerides of oleic and linoleic acids in a mixture of olive oil and sunflower seed oil. The applicability of the density functional theory together with the vibrational spectroscopy for the identification of mixtures of vegetable oils is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NEAR-INFRARED IMAGING POLARIMETRY OF GGD 27: CIRCULAR POLARIZATION AND MAGNETIC FIELD STRUCTURES

Near-infrared imaging polarimetry in the J , H , and K{sub s} bands was carried out for GGD 27 in the dark cloud Lynds 291. Details of an infrared reflection nebula associated with the optical nebulosity GGD 27 and the infrared nebula GGD 27 IRS are presented. Aperture photometry of 1263 point-like sources, detected in all three bands, was used to classify them based on a color–color diagram, and the linear polarization of several hundred sources was determined, with the latter used to map the magnetic field structure around GGD 27. This field, around GGD 27 IRS, appears to be associated with the extended CO outflow of IRAS 18162–2048; however, there are partly distorted or bent components in the field. The Chandrasekhar–Fermi method gives an estimate of the magnetic field strength as ∼90 μ G. A region associated with GGD 27 IRS is discovered to have a circular polarization in the range of ∼2%–11% in the K{sub s} band. The circular polarization has an asymmetric positive/negative pattern and extends out to ∼ 120″ or 1.0 pc. The circular and linear polarization patterns are explained as resulting from a combination of dense inner and fainter outer lobes, suggesting episodic outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

Ku-band signal design study

Analytical tools, methods and techniques for assessing the design and performance of the space shuttle orbiter data processing system (DPS) are provided. The computer data processing network is evaluated in the key areas of queueing behavior synchronization and network reliability. The structure of the data processing network is described as well as the system operation principles and the network configuration. The characteristics of the computer systems are indicated. System reliability measures are defined and studied. System and network invulnerability measures are computed. Communication path and network failure analysis techniques are included.

Rubin, I.↗

Synthesis and characterization of Fe{sub 2}O{sub 3} nanoparticles by simple precipitation method

A simple and efficient synthesis of Iron-oxide nanoparticles was carried out by precipitation method using ferric chloride as precursor and ammonium hydroxide as a stabilizing agent at different calcination temperatures. The synthesized powder was characterized by powder X-Ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscope (FE-SEM) and Transmission Electron Microscopy (TEM). X-ray diffraction indicated the formation hematite Fe{sub 2}O{sub 3} structure. FTIR showed various functional groups of particles and absorption bands related to metal oxygen vibration modes. The heating temperatures were varied at 100 °C, 200°C, and 300°C. The Fe{sub 2}O{sub 3} nanostructures with the average particle size of about 36.22 nm were prepared at 300°C for 4h. TEM study is also confirming the nanosize of Fe{sub 2}O{sub 3} particle. This aqueous precipitation method gives a large scale production of Fe{sub 2}O{sub 3} nanoparticles easily.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Asymmetric modes decomposition in an overmoded relativistic backward wave oscillator

Most of the investigated overmoded relativistic backward wave oscillators (RBWOs) are azimuthally symmetric; thus, they are designed through two dimensional (2-D) particle-in-cell (PIC) simulations. However, 2-D PIC simulations cannot reveal the effect of asymmetric modes on beam-wave interaction. In order to investigate whether asymmetric mode competition needs to be considered in the design of overmoded RBWOs, a numerical method of determining the composition of both symmetric and asymmetric modes in three dimensional (3-D) PIC simulations is introduced in this paper. The 2-D and 3-D PIC simulation results of an X-band overmoded RBWO are analyzed. Our analysis indicates that the 2-D and 3-D PIC simulation results of our device are quite different due to asymmetric mode competition. In fact, asymmetric surface waves, especially EH{sub 11} mode, can lead to serious mode competition when electron beam propagates near the surface of slow wave structures (SWSs). Therefore, additional method of suppressing asymmetric mode competition, such as adjusting the reflections at both ends of SWSs to decrease the Q-factor of asymmetric modes, needs to be utilized in the design of overmoded RBWOs. Besides, 3-D PIC simulation and modes decomposition are essential for designing overmoded RBWOs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Strain induced modification in phonon dispersion curves of monolayer boron pnictides

In the frame work of density functional theory, the biaxial strain induced phonon dispersion curves of monolayer boron pnictides (BX, X = N, P, As, and Sb) have been investigated. The electron-ion interactions have been modelled using ultrasoft pseudopotentials while exchange-correlation energies have been approximated by the method of local density approximation in the parameterization of Perdew-Zunger. The longitudinal and transverse acoustic phonon modes of boron pnictide sheets show linear dependency on wave vector k{sup →} while out of plane mode varies as k{sup 2}. The in-plane longitudinal and out of plane transverse optical modes in boron nitride displaying significant dispersion similar to graphene. We have analyzed the biaxial strain dependent behaviour of out of plane acoustic phonon mode which is linked to ripple for four BX sheets using a model equation with shell elasticity theory. The strain induces the hardening of this mode with tendency to become more linear with increase in strain percentage. The strain induced hardening of out of plane acoustic phonon mode indicates the absence of rippling in these compounds. Our band structure calculations for both unstrained and strained 2D h-BX are consistent with previous calculations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗