The Nanoeletronic Modelling Tool (NEMO) and Its Expansion to High Performance Parallel Computing
The development of NEMO has benefited from the vast research on resonant tunneling diodes that had been done before the project.
SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The development of NEMO has benefited from the vast research on resonant tunneling diodes that had been done before the project.
The NASA John H. Glenn Research Center at Lewis Field is developing the Glenn Icing Computational Environment (GlennICE) tool to aid those evaluating, designing and certifying aircraft, engines, and aircraft components for flight in icing conditions. This short course will walk through some of the underlying physics involved with GlennICE and how we achieve efficient 3D ice accretion predictions. After an introduction of GlennICE, an analysis of the Common Research Model High-Lift will be demonstrated to showcase the typical workflow for an aircraft icing analysis. Within this walkthrough, capabilities will be highlighted with future planned capabilities being discussed. Finally, we will showcase the impact GlennICE is having on NASA’s icing portfolio and how it is advancing aircraft icing research and safety.
This paper discusses the integration of CLIPS into a hybrid expert system neural network AI tool for the NeXT computer. The main discussion is devoted to the joining of these two AI paradigms in a mutually beneficial relationship. We conclude that expert systems and neural networks should not be considered as competing AI implementation methods, but rather as complimentary components of a whole.
There was probably no higher profile application of meshing, visualization, and computational software this past year than that performed in support of the space shuttle's Return to Flight activities. After heavy use of simulation during the accident investigation, these same tools are now helping address safety and operational issues. In turn, these applications are raising the bar for computational tools in terms of simulation fidelity and turnaround time.
Unstructured grid adaptation is a tool to control Computational Fluid Dynamics (CFD) discretization error. However, adaptive grid techniques have made limited impact on production analysis workflows where the control of discretization error is critical to obtaining reliable simulation results. Issues that prevent the use of adaptive grid methods are identified by applying unstructured grid adaptation methods to a series of benchmark cases. Once identified, these challenges to existing adaptive workflows can be addressed. Unstructured grid adaptation is evaluated for test cases described on the Turbulence Modeling Resource (TMR) web site, which documents uniform grid refinement of multiple schemes. The cases are turbulent flow over a Hemisphere Cylinder and an ONERA M6Wing. Adaptive grid force and moment trajectories are shown for three integrated grid adaptation processes with Mach interpolation control and output error based metrics. The integrated grid adaptation process with a finite element (FE) discretization produced results consistent with uniform grid refinement of fixed grids. The integrated grid adaptation processes with finite volume schemes were slower to converge to the reference solution than the FE method. Metric conformity is documented on grid/metric snapshots for five grid adaptation mechanics implementations. These tools produce anisotropic boundary conforming grids requested by the adaptation process.
Some means of combining both computer simulation and anlytical techniques are indicated in order to mutually enhance their efficiency as design tools and to motivate those involved in engineering design to consider using such combinations. While the idea is not new, heavy reliance on computers often seems to overshadow the potential utility of analytical tools. Although the example used is drawn from the area of dynamics and control, the principles espoused are applicable to other fields. In the example the parameter plane stability analysis technique is described briefly and extended beyond that reported in the literature to increase its utility (through a simple set of recursive formulas) and its applicability (through the portrayal of the effect of varying the sampling period of the computer). The numerical values that were rapidly selected by analysis were found to be correct for the hybrid computer simulation for which they were needed. This obviated the need for cut-and-try methods to choose the numerical values, thereby saving both time and computer utilization.
Astronomer's Proposal Tool (APT) is a computer program that assists astronomers in preparing their Phase 1 and Phase 2 Hubble Space Telescope science programs. APT is a successor to the Remote Proposal Submission System 2 (RPS2) program, which has been rendered obsolete by more recent advances in computer software and hardware. APT exploits advances associated with widespread use of the Internet, multiplatform visual development software tools, and overall increases in the power of desktop computer hardware, all in such a way as to make the preparation and submission of proposals more intuitive and make observatory operations less cumbersome. APT provides documentation and help that are friendly, up to date, and easily accessible to users of varying levels of expertise, while defining an extensible framework that is responsive to changes in both technology and observatory operations. APT consists of two major components: (1) a set of software tools that are intuitive, visual, and responsive and (2) an integrated software environment that unifies all the tools and makes them interoperable. The APT tools include the Visual Target Tuner, Proposal Editor, Exposure Planner, Bright Object Checker, and Visit Planner.
The formation of surface alloys is a growing research field that, in terms of the surface structure of multicomponent systems, defines the frontier both for experimental and theoretical techniques. Because of the impact that the formation of surface alloys has on surface properties, researchers need reliable methods to predict new surface alloys and to help interpret unknown structures. The structure of surface alloys and when, and even if, they form are largely unpredictable from the known properties of the participating elements. No unified theory or model to date can infer surface alloy structures from the constituents properties or their bulk alloy characteristics. In spite of these severe limitations, a growing catalogue of such systems has been developed during the last decade, and only recently are global theories being advanced to fully understand the phenomenon. None of the methods used in other areas of surface science can properly model even the already known cases. Aware of these limitations, the Computational Materials Group at the NASA Glenn Research Center at Lewis Field has developed a useful, computationally economical, and physically sound methodology to enable the systematic study of surface alloy formation in metals. This tool has been tested successfully on several known systems for which hard experimental evidence exists and has been used to predict ternary surface alloy formation (results to be published: Garces, J.E.; Bozzolo, G.; and Mosca, H.: Atomistic Modeling of Pd/Cu(100) Surface Alloy Formation. Surf. Sci., 2000 (in press); Mosca, H.; Garces J.E.; and Bozzolo, G.: Surface Ternary Alloys of (Cu,Au)/Ni(110). (Accepted for publication in Surf. Sci., 2000.); and Garces, J.E.; Bozzolo, G.; Mosca, H.; and Abel, P.: A New Approach for Atomistic Modeling of Pd/Cu(110) Surface Alloy Formation. (Submitted to Appl. Surf. Sci.)). Ternary alloy formation is a field yet to be fully explored experimentally. The computational tool, which is based on the BFS (Bozzolo, Ferrante, and Smith) method for the calculation of the energetics, consists of a small number of simple PCbased computer codes that deal with the different aspects of surface alloy formation. Two analysis modes are available within this package. The first mode provides an atom-by-atom description of real and virtual stages 1. during the process of surface alloying, based on the construction of catalogues of configurations where each configuration describes one possible atomic distribution. BFS analysis of this catalogue provides information on accessible states, possible ordering patterns, and details of island formation or film growth. More importantly, it provides insight into the evolution of the system. Software developed by the Computational Materials Group allows for the study of an arbitrary number of elements forming surface alloys, including an arbitrary number of surface atomic layers. The second mode involves large-scale temperature-dependent computer 2. simulations that use the BFS method for the energetics and provide information on the dynamic processes during surface alloying. These simulations require the implementation of Monte-Carlo-based codes with high efficiency within current workstation environments. This methodology capitalizes on the advantages of the BFS method: there are no restrictions on the number or type of elements or on the type of crystallographic structure considered. This removes any restrictions in the definition of the configuration catalogues used in the analytical calculations, thus allowing for the study of arbitrary ordering patterns, ultimately leading to the actual surface alloy structure. Moreover, the Monte Carlo numerical technique used for the large-scale simulations allows for a detailed visualization of the simulated process, the main advantage of this type of analysis being the ability to understand the underlying features that drive these processes. Because of the simplicity of the BFS method for e energetics used in these calculations, a detailed atom-by-atom analysis can be performed at any point in the simulation, providing necessary insight on the details of the process. The main objective of this research program is to develop a tool to guide experimenters in understanding and interpreting often unexpected results in alloy formation experiments. By reducing the computational effort without losing physical accuracy, we expect that powerful simulation tools will be developed in the immediate future, which will allow material scientists to easily visualize and analyze processes at a level not achievable experimentally.
A series of ongoing research programs at Georgia Tech established a need for a simulation support tool for aircraft computer-based aids. This led to the design and development of the Georgia Tech Electronic Flight Instrument Research Tool (GT-EFIRT). GT-EFIRT is a part-task flight simulator specifically designed to study aircraft display design and single pilot interaction. ne simulator, using commercially available graphics and Unix workstations, replicates to a high level of fidelity the Electronic Flight Instrument Systems (EFIS), Flight Management Computer (FMC) and Auto Flight Director System (AFDS) of the Boeing 757/767 aircraft. The simulator can be configured to present information using conventional looking B757n67 displays or next generation Primary Flight Displays (PFD) such as found on the Beech Starship and MD-11.
TAPDIE, a generalized macro written for the APT numerical control system, cuts threads in stock too big for conventional machines or for which conventional methods are unsuitable. TAPDIE computes the machine tool path necessary and the information is passed on to a post-processor which produces a control tape.
Price and Cost Estimating Program (PACE II) was developed to prepare man-hour and material cost estimates. Versatile and flexible tool significantly reduces computation time and errors and reduces typing and reproduction time involved in preparation of cost estimates.
The analytical tools (analysis and computer simulation) needed to explain and predict the dynamic operation of air cushion landing systems (ACLS) is described. The following tasks were performed: the development of improved analytical models for the fan and the trunk; formulation of a heave pitch roll analysis for the complete ACLS; development of a general purpose computer simulation to evaluate landing and taxi performance of an ACLS equipped aircraft; and the verification and refinement of the analysis by comparison with test data obtained through lab testing of a prototype cushion. Demonstration of simulation capabilities through typical landing and taxi simulation of an ACLS aircraft are given. Initial results show that fan dynamics have a major effect on system performance. Comparison with lab test data (zero forward speed) indicates that the analysis can predict most of the key static and dynamic parameters (pressure, deflection, acceleration, etc.) within a margin of a 10 to 25 percent.
Data are presented for aluminum and copper with 20, 30 and 50 deg tools. Data for computed mechanics on the shear plane and rake face are also included.
An improved method for use of optimization techniques in transonic airfoil design is demonstrated. FLO6QNM incorporates a modified quasi-Newton optimization package, and is shown to be more reliable and efficient than the method developed previously at NASA-Ames, which used the COPES/CONMIN optimization program. The design codes are compared on a series of test cases with known solutions, and the effects of problem scaling, proximity of initial point to solution, and objective function precision are studied. In contrast to the older method, well-converged solutions are shown to be attainable in the context of engineering design using computational fluid dynamics tools, a new result. The improvements are due to better performance by the optimization routine and to the use of problem-adaptive finite difference step sizes for gradient evaluation.
An improved method for use of optimization techniques in transonic airfoil design is demonstrated. FLO6QNM incorporates a modified quasi-Newton optimization package, and is shown to be more reliable and efficient than the method developed previously at NASA-Ames, which used the COPES/CONMIN optimization problem. The design codes are compared on a series of test cases with known solutions, and the effects of problem scaling, proximity of initial point to solution, and objective function precision are studied. In contrast to the older method, well-converged solutions are shown to be attainable in the context of engineering design using computational fluid dynamics tools, a new result. The improvements are due to better performance by the optimization routine and to the use of problem-adaptive finite difference step sizes for gradient evaluation.
The SURE program is a design/validation tool for ultrareliable computer system architectures. The system uses simple algebraic formulas to compute accurate upper and lower bounds for the death state probabilities of a large class of semi-Markov models. The mathematical formulas used in the program were derived from a mathematical theorem proven by Allan White under contract to NASA Langley Research Center. This mathematical theorem is discussed along with the user interface to the SURE program.
The objectives, approach, and status of a program to develop the computational fluid dynamics tools needed to improve combustor design and analysis are outlined. The calculation procedure selected consists of a finite difference solution of the time averaged, steady state, primitive variable, elliptic form of the Reynolds equations. Standard TEACH type numerics are used to solve the resulting equations. These include hybrid differencing, SIMPLE algorithm for the pressure field, line by line iterative solution using the ADI method and the tridiagonal matrix algorithm (TDMA). Convergence is facilitated by using under relaxation. The physical processes are modeled by a two equation eddy viscosity model for turbulence; combustion is represented by a simple, irreversible, one step chemical reaction whose rate is influenced only by the time scale of the turbulence. The model evaluation procedure is also described.
The theoretical models now available that characterize heavily doped (highly conducting) regions in silicon are survyed. Analytical and numerical approaches that determine the influence of such regions on the conversion efficiency of solar cells are examined. Although dilutely doped silicon is well characterized except for some disagreement about optical absorption coefficients, what exists now for heavily doped silicon and its interplay with adjoining regions is an incomplete theory in which not all contributers to transport, recombination, generation, and trapping are defined. Further, the parameters relating to these mechanisms and their values as determined by experiment are subject to various interpretations. The characterization of heavily doped silicon is treated not as a theory but rather as an imperfectly articulated and incompletely formalized body of experience. This view is intended to help point the way toward the attainment of a more complete of heavily doped silicon and thereby toward more informed designs of solar cells. Because computer programs constitute tools both for design and for estimating performance limits, the review includes some remarks pertinent to existing and developing programs.