Search NASA⌕ Search

SEARCH · Search NASA

Results for “Continuous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

SO3/H2SO4 continuous real-time sensor demonstration at a power plant

We present results from field testing of a new, innovative sensor developed to measure SO3/H2SO4 continuously and in real time at a coal-fired power plant. The system utilizes the sensitivity, specificity, and real-time capabilities of mid-infrared (Mid-IR) laser-based sensor technology, along with a heated, close-coupled cell mounted directly to a power plant duct. Measurements were made by the laser sensor over a 2-day period and compared to results from the accepted method, EPA 8A, which requires a 30-minute collection, labor intensive processing, and off-site analysis at a lab. In contrast to the condensation method, the laser sensor continuously samples flue gas and reports measurements of the concentration of SO3/H2SO4, SO2 ever second with unattended operation. This initial demonstration proved the sensor concept and paves the way for its use for optimizing sorbent injection used to neutralize SO3/H2SO4. Optimized sorbent injection will enable significant cost savings associated with efforts to mitigate the presence and effects of SO3/H2SO4 such as “Blue Plume”, air heater fouling, and duct corrosion. In particular, the real-time, actionable information will enable better control of additive injection in flex conditions and variable fuels.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2022

Integrated combustor nozzles with continuously curved liner segments

An integrated combustor nozzle includes an inner liner segment; an outer liner segment; and a panel extending radially between the inner and outer liner segments. The panel includes a forward end, an aft end, and a side walls extending axially from the forward end to the aft end. The aft end defines a turbine nozzle having a trailing edge circumferentially offset from the forward end. The inner liner segment has a pair of sealing surfaces, each of which defines a first continuous curve in the circumferential direction. The outer liner segment has a pair of sealing surfaces, each of which defines a second continuous curve in the circumferential direction. In some instances, the curves are monotonic in the circumferential direction. A segmented annular combustor including an array of such integrated combustor nozzles is also provided.

Berry, Jonathan Dwight↗
DOE OSTI2022

Process and apparatus for continuous production of porous structures

An apparatus and process are presented for continuous production of metal-based micro-porous structures of pore sizes from 0.3 nm to 5.0 μm from a green part of characteristic diffusion mass transfer dimension less than 1 mm through chemical reactions in a continuous flow of gas substantially free of oxygen. The produced micro-porous structures include i) thin porous metal sheets of thickness less than 200 μm and pore sizes in the range of 0.1 to 5.0 μm, ii) porous ceramic coating of thickness less than 40 μm and ceramic particle sizes of 200 nm or less on a porous metal-based support structures of pore sizes in the range of 0.1 to 5 μm.

Liu, Wei↗
DOE OSTI2023

Continuous toolpaths for additive manufacturing

Toolpath generation for additive manufacturing systems involves operations on polygonal contours derived from a model for additively manufacturing a structure. One aspect involves modifying or creating a model to allow parts to be printed without starting and stopping the printing equipment by generating continuous toolpaths or toolpaths having a reduced number of isolated paths. Another aspect involves modifying a slicing engine to generate a continuous toolpath or toolpath having a reduced number of isolated paths based on a representation of an object to be additively manufactured. Another aspect involves selectively placing the gaps at alternating positions among the sliced layers to create a zippering effect.

Borish, Michael C.↗
DOE OSTI2013

Continuous-energy eigenvalue sensitivity coefficient calculations in TSUNAMI-3D

Two methods for calculating eigenvalue sensitivity coefficients in continuous-energy Monte Carlo applications were implemented in the KENO code within the SCALE code package. The methods were used to calculate sensitivity coefficients for several test problems and produced sensitivity coefficients that agreed well with both reference sensitivities and multigroup TSUNAMI-3D sensitivity coefficients. The newly developed CLUTCH method was observed to produce sensitivity coefficients with high figures of merit and a low memory footprint, and both continuous-energy sensitivity methods met or exceeded the accuracy of the multigroup TSUNAMI-3D calculations. (authors)

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Optimized design of reactor cores for continuous operation of Belgian nuclear power plants

Two Belgian nuclear power plants, owned and operated by Electrabel, were initially planned to be phased out in 2015, reaching their maximum life time of operation by the initial design. The fuel management of those two units has been subsequently designed by Tractebel to make the best use of the energy in the fuel assemblies either in the core or in the storage pool and to minimize the size of the fresh reloads in the terminating cycles. However, for ensuring energy security in Belgium, the Government decided in the same year to extend the life time of operation of the two units for 10 years, which raised the need to resume their continuous operation, in the opposite direction of the core contents and with a significant break in the usual sequence of cycle reloads. All this required adaptation of the tools and process for optimized reactor core design, in order to ensure the continuous and flexible operation of those units. The Tractebel LWRWIMS-PANTHER (LWP) core physics package is based on the 3-dimensional (3D) neutronic code PANTHER and the lattice code LWRWIMS for the generation of the assembly nuclear data. Both have been qualified by Tractebel for the Belgian Units to perform a complete range of PWR reactor calculations for fuel management design safety parameters assessment, transient analysis and operational support. In-core fuel management involves calculating core reactivity, power distribution and isotopic inventory for subsequent fuel cycles of a nuclear power plant in order to maintain adequate safety margins and operating lifetime for each core loading. This paper presents Tractebel's improved core design tools and process, the approach to optimize the reactor core design, and the applications to the 2 successive but opposite design requirements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Fourier analysis of continuous fractional diffusion synthetic acceleration schemes in slab geometry

We propose two fractional extensions of continuous diffusion synthetic acceleration (DSA) with fractional derivative order α varying over the interval 2 ≥ α ≥ 1 . We investigate the spectral properties of the corresponding continuous families of fractional preconditioners by performing Fourier analysis for a model infinite homogeneous medium problem in slab geometry. The first family results in a fractional acceleration scheme, FrDSAo, that reduces to traditional DSA for .α = 2 and scattering ratio c limiting to a unit value (c → 1) but is otherwise optimized via the Fourier analysis, to obtain the smallest possible spectral radius, for c < 1 and 2 ≥ α ≥ 1. The second family corresponds to a fractional acceleration scheme, FrDSAs, that reduces to traditional DSA for α = 2 for all values of c. The latter scheme is not optimized but has the advantage of lending itself to a more straightforward implementation. For high values of c, the results of the Fourier analysis point to the existence of an interval 2 > α > ∼1.8 where both FrDSAo and FrDSAs can achieve a lower spectral radius than DSA. For example, DSA has a spectral radius of ∼0.2246 for c = 0.9999 while FrDSAo produces a value of ∼0.1616 at α = 1.92 and FrDSAs results in ∼0.2116 at α =1.93. (author)

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Continual Learning for Particle Accelerators

Particle accelerators operate under dynamically changing conditions, which often lead to data distribution drifts. These drifts pose significant challenges for Machine Learning (ML) models, which typically fail to maintain performance when faced with such non-stationary data. In particle accelerators, the primary sources of these data drifts include changes in accelerator settings and non-measured parameters such as machine degradation and environmental factors. Previous research has proposed conditional models to handle multiple beam configurations effectively; however, it is challenging to train the ML models on all possible configuration settings. Additionally, conditional models alone can not address performance degradation caused by drifts due to non-measured factors. These limitations contribute to a significant gap between ML development and its deployment in real-world operational settings. To bridge this gap, in this paper, we identify some of the key areas within particle accelerators where continual learning can help mitigate drift-induced performance degradation. In addition, we present a practical use case where a conditional Auto-Encoder model coupled with memory-based continual learning has been employed to demonstrate stable performance even when underlying data drifts

Rajput, Kishansingh [Thomas Jefferson National Acc↗
DOE OSTI2018

Continuous Integration and Delivery for HPC

Continuous integration, delivery, and deployment (CICD) is widely used in DevOps communities, as it allows for teams of all sizes to deploy rapidly-changing hardware and software resources quickly and confidently. In this paper, we will describe how University of Colorado Boulder Research Computing has adopted these practices on the RMACC Summit supercomputer to allow system engineers and researchers alike to capitalize on the benefits of CICD-centric development workflows. We will introduce the topic of CICD at a high level and describe how such practices can ease common software management challenges for High-Performance Computing (HPC) resources. We will then document the infrastructure deployed for Summit, and explain how software such as Jenkins and Singularity enabled adaptation for an HPC environment. We will conclude with two case studies discussing the use of our CICD infrastructure: one case study from the perspective of a system engineer maintaining user-facing resources, and the other case study from the perspective of a researcher developing, maintaining, and using the MFiX-Exa codebase.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Hydrothermal catalysis of waste greases into green gasoline, jet, and diesel biofuels in continuous flow supercritical water

Production of green gasoline, jet, and diesel biofuels from waste greases was achieved using a novel hydrothermal, continuous-flow catalytic process operating under supercritical water conditions, with recycled water the only added chemical. Thermally and chemically stable catalysts were explored to optimize yields of liquid biofuels and to minimize production of gases and acidic compounds. A 50:50 mixture of brown and yellow waste greases converted into 76.6 wt% liquid biocrude (BC); the remainder converted to water and gases. Less than 0.2% of the FS formed carbon char (mainly amongst catalyst particles). Various tubular reactors (Inconel, ® Hastelloy®, titanium, stainless) showed no interior defects, erosion, or mass loss after runs. Here, the titanium catalyst was fully recovered and regenerated back to its original potency. The BC was further refined into 28%, 48%, 20%, and 4 wt%, respectively for green gasoline, jet, diesel, and bunker. Biofuels were analyzed for compound class compositions and reaction mechanisms were proposed. The hundreds of identified fuel products (C3-C35) from processing oleic acid as a pure model compound were identified. The neat green gasoline and diesel biofuels along with a 50% green jet blend (with petroleum Jet A) were tested in appropriate spark ignition, turbine, and diesel engines at University of MN Engine Labs. Biofuels achieved 107.7%, 97.2%, and 101.3% engine power performance levels relative to petroleum fuels (91-Octane, Jet A, #2 Diesel) along with lower CO and pollutant emissions. Biofuels passed ASTM fuel specifications (D4814, D7566, D975) including mandated corrosion and low sulfur limits of all three biofuels.

09 BIOMASS FUELS↗
DOE OSTI2024

Additive manufacturing of sandwich panels with continuous fiber reinforced high modulus composite facings

Abstract An improved approach consisting of a combination of fiber placement and fused filament fabrication is introduced for the additive manufacture (AM) of structural grade sandwich beams. Here, sandwich beams are additively manufactured using in‐situ deposition and consolidation of continuous fiber unidirectional facings made from a commingled yarn system of e‐glass fiber (~50% vol.) and amorphous PET, and a hexagonal honeycomb core structure made from PETG. Both facings and the sandwich core are manufactured on a single machine, in one sequence (skin‐core‐skin), employing the benefit of matrix compatibility to create autohesion at the interfaces. Flexural and transverse shear rigidity are determined experimentally and compared with analytical predictions and show correlation to within 3%. Flexural strength and core shear strength are also measured. Post‐mortem examinations show that core fracture and core facing debond were the dominant failure mode in flexure. Single cantilever beam tests were performed to evaluate core facing debond toughness. Subsequently, surface preheat using infrared heaters was utilized to increase autohesion between core and facing. The results show debond toughness was increased 4 times using infrared heating. This research effort presents a manufacturing approach that has the potential for the AM of stiff, well bonded, structural grade sandwich beams, in an integrated sequence, employing in‐situ consolidation to the facings, without the need for the use of intermediate adhesives for skin‐to‐core bonding. Highlights An improved additive manufacturing technique for making sandwich panels is developed. Sandwich panel facings have fiber volume fractions of approximately 50%. Surface preheat improves core‐to‐facing debond toughness by a factor of 4. Top and bottom facings are consolidated during manufacture leading to better properties. Experimental results are compared to analytical predictions and show good correlation.

17 WIND ENERGY↗
DOE OSTI2019

Removing Cs within a continuous flow set-up by an ionic exchanger material transformable into a final waste form

Silica monoliths loaded with hexacyanoferrate (HCF) nanoparticles were designed and synthesized to selectively remove Cs + ions from an aqueous saline solution within a continuous flow set-up. The decontamination and hydrodynamic efficiency of this smart material was compared to other granularly supported HCF. Finally, a thermal treatment was applied to transform the HCF functionalized monolith into a final waste form matrix.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2014

The role of photo-osmotic adaptation in semi-continuous culture and lipid particle release from Dunaliella viridis

Great efforts have been made to elucidate the phenotypic responses of alga to varying levels of nutrients, osmotic environments, and photosynthetically active radiation intensities, though the role of interactions among these variables is largely nebulous. We also describe a general method for establishing and maintaining semi-continuous cultures of the halophilic microalgal production strain, Dunaliella viridis, that is independent of variations in salinity and illumination intensity. Using this method, the cultures were evaluated to elucidate the overlapping roles of photosynthetic and osmotic adaptation on the accumulation and compositional variation of the biomass, photosynthetic productivity, and physiological biomarkers, as well as spectroscopic and morphological details at the single-cell level. Correlation matrices defining the relationships among the observables and based on variation of the illumination intensity and salinity were constructed for predicting bioproduct yields for varying culture conditions. Following maintenance of stable cultures for 6-week intervals, phenotypic responses to photo-osmotic drift were explored using a combination of single-cell hyperspectral fluorescence imaging and flow cytometry. In addition to morphological changes, release of lipid microparticles from the cells that is disproportionate to cell lysis was observed under hypotonic drift, indicating the existence of a reversible membrane permeation mechanism in Dunaliella. Furthermore, this phenomenon introduces the potential for low-cost strategies for recovering lipids and pigments from the microalgae by minimizing the requirement for energy intensive harvesting and dewatering of the biomass. The results should be applicable to outdoor culture, where seasonal changes resulting in variable solar flux and precipitation and evaporation rates are anticipated.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

On the Order Parameter of the Continuous Phase Transition in the Classical and Quantum Mechanical Limits

The mean field theory is revisited in the classical and quantum mechanical limits. Taking into account the boundary conditions at the phase transition and the third law of the thermodynamics the physical properties of the ordered and disordered phases were reported. The equation for the order parameter predicts the occurrence of a saturation of Ψ 2 = 1 near Θ S , the temperature below the quantum mechanical ground state is reached. The theoretical predictions are also compared with high resolution thermal expansion data of SrTiO 3 monocrystalline samples and other some previous results. An excellent agreement has been found suggesting a universal behavior of the theoretical model to describe continuous structural phase transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Sugar production from bioenergy sorghum by using pilot scale continuous hydrothermal pretreatment combined with disk refining

Chemical-free pretreatments are attracting increased interest because they generate less inhibitor in hydrolysates. In this study, pilot-scaled continuous hydrothermal (PCH) pretreatment followed by disk refining was evaluated and compared to laboratory-scale batch hot water (LHW) pretreatment. Bioenergy sorghum bagasse (BSB) was pretreated at 160–190 °C for 10 min with and without subsequent disk milling. Hydrothermal pretreatment and disk milling synergistically improved glucose and xylose release by 10–20% compared to hydrothermal pretreatment alone. Maximum yields of glucose and xylose of 82.55% and 70.78%, respectively were achieved, when BSB was pretreated at 190 °C and 180 °C followed by disk milling. LHW pretreated BSB had 5–15% higher sugar yields compared to PCH for all pretreatment conditions. The surface area improvement was also performed. PCH pretreatment combined with disk milling increased BSB surface area by 31.80–106.93%, which was greater than observed using LHW pretreatment.

09 BIOMASS FUELS↗
DOE OSTI2022

Hydrogenolysis of n -eicosane over Ru-based catalysts in a continuous flow reactor

The hydrogenolysis of n-eicosane (C 20 H 42 ) was studied under differential conditions over Ru-based catalysts including Ru/SiO 2 , Ru/TiO 2 , and Ru/SBA-15, using a continuous flow reactor that was specially designed for large hydrocarbon reactants that are solids at room temperature. Similar rates and product distributions were obtained for Ru/SiO 2 and Ru/SBA-15 at 433 K, with the most abundant products being C 1 and C 19 hydrocarbons and smaller amounts of C 8 to C 18 also being produced. The higher yield of C 1 and C 19 indicates that cleavage of the terminal C-C bond is somewhat more facile than an internal C-C bond. At 473 K the product distribution shifted to mostly C 1 suggesting that, at this temperature, the adsorbed alkyl fragments undergo complete C-C bond scission prior to desorbing. Here, the conversion was also found to be inversely proportional to the H 2 pressure. Similar results were obtained for Ru/TiO 2 except this catalyst was found to be less active than both Ru/SiO 2 and Ru/SBA-15.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

In vitro continuous protein evolution empowered by machine learning and automation

Directed evolution has become one of the most successful and powerful tools for protein engineering. However, the efforts required for designing, constructing, and screening a large library of variants can be laborious, time-consuming, and costly. With the recent advent of machine learning (ML) in the directed evolution of proteins, researchers can now evaluate variants in silico and guide a more efficient directed evolution campaign. Furthermore, recent advancements in laboratory automation have enabled the rapid execution of long, complex experiments for high-throughput data acquisition in both industrial and academic settings, thus providing the means to collect a large quantity of data required to develop ML models for protein engineering. In this perspective, here we propose a closed-loop in vitro continuous protein evolution framework that leverages the best of both worlds, ML and automation, and provide a brief overview of the recent developments in the field.

59 BASIC BIOLOGICAL SCIENCES↗