Search NASA⌕ Search

SEARCH · Search NASA

Results for “Direct Drive”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Baseline tests of the Kordesh hybrid passenger vehicle

Performance test results are presented for a four-passenger Austin A40 sedan that was converted to a heat-engine-alternator-and battery-powered hybrid. It is propelled by a conventional, gasoline-fueled, heat-engine-driven alternator and a traction pack powering a series-wound, 10 hp direct-current electric drive motor. The 16 hp gasoline engine drives the 7 kilowatt alternator, which provides electrical power to the drive motor or to the 96 volt traction battery through a rectifier. The propulsion battery consists of eight 12 volt batteries connected in series. The electric motor is coupled to a four-speed standard transmission, which drives the rear wheels. Power to the motor is controlled by a three-step foot throttle, which actuates relays that control armature current and field excitation. Conventional hydraulic brakes are used.

Soltis, R. F.↗

The outlook for advanced transport aircraft

The technological advances most likely to contribute to advanced aircraft designs and the efficiency, performance, and financial considerations driving the development directions for new aircraft are reviewed. Fuel-efficiency is perceived as the most critical factor for any new aircraft or component design, with most gains expected to come in areas of propulsion, aerodynamics, configurations, structural designs and materials, active controls, digital avionics, laminar flow control, and air-traffic control improvements. Any component area offers an efficiency improvement of 3-12%, with a maximum of 50% possible with a 4000 m range aircraft. Advanced turboprops have potential applications in short and medium haul subsonic aircraft, while a fuel efficient SST may be possible by the year 2000. Further discussion is devoted to the pivoted oblique wing aircraft, lightweight structures, and the necessity for short payback times.

Leavens, J. M., Jr.↗

Small image laser range finder for planetary rover

A variety of technical subjects need to be solved before planetary rover navigation could be a part of future missions. The sensors which will perceive terrain environment around the rover will require critical development efforts. The image laser range finder (ILRF) discussed here is one of the candidate sensors because of its advantage in providing range data required for its navigation. The authors developed a new compact-sized ILRF which is a quarter of the size of conventional ones. Instead of the current two directional scanning system which is comprised of nodding and polygon mirrors, the new ILRF is equipped with the new concept of a direct polygon mirror driving system, which successfully made its size compact to accommodate the design requirements. The paper reports on the design concept and preliminary technical specifications established in the current development phase.

Wakabayashi, Yasufumi↗

A Traceable Ground to On-Orbit Radiometric Calibration System for the Solar Reflective Wavelength Region

This paper describes the combination of a Mie scattering spectral BSDF and BTDF albedo standard whose calibration is traceable to the NIST SIRCUS Facility or the NIST STARR II Facility. The Space-based Calibration Transfer Spectroradiometer (SCATS) sensor uses a simple, invariant optical configuration and dedicated narrow band spectral channel modules to provide very accurate, polarization-insensitive, stable measurements of earth albedo and lunar disk albedo. Optical degradation effects on calibration stability are eliminated through use of a common optical system for observations of the Sun, Earth, and Moon. The measurements from space would be traceable to SI units through preflight calibrations of radiance and irradiance at NIST's SIRCUS facility and the invariant optical system used in the sensor. Simultaneous measurements are made in multiple spectral channels covering the solar reflective wavelength range of 300 nm to 2.4 microns. The large dynamic range of signals is handled by use of single-element, highly-linear detectors, stable discrete electronic components, and a non imaging optical configuration. Up to 19 spectral modules can be mounted on a single-axis drive to give direct pointing at the Earth and at least once per orbit view of the Sun and Moon. By observing the Sun on every orbit, the most stringent stability requirements of the system are limited to short time periods. The invariant optical system for both radiance and irradiance measurements also give excellent transfer to-orbit SI traceability. Emerging instrumental requirements for remotely sensing tropospheric trace species have led to a rethinking by some of the paradigm for Systeme International d'Unites (SI) traceability of the spectral irradiance and radiance radiometric calibrations to spectral albedo (sr(exp -1)) which is not a SI unit. In the solar reflective wavelength region the spectral albedo calibrations are tied often to either the spectral albedo of a solar diffuser or the Moon. This new type of Mie scattering diffuser (MSD) is capable of withstanding high temperatures, and is more Lambertian than Spectralon(tm). It has the potential of covering the entire solar reflective wavelength region. Laboratory measurements have shown that the specular reflectance component is negligible, and indicate that internal absorption by multiple scattering is small. This MSD, a true volume diffuser, exhibits a high degree of radiometric stability which suggests that measurements at the National Institute of Standards and Technology (NIST) could provide a spectral albedo standard. Measurements have been made of its radiometric stability under a simulated space environment of high energy gamma rays, high energy protons, and UV radiation from ambient down to the vacuum ultraviolet H Lyman alpha at 121.6 nm for its eventual use in space as a solar diffuser.

Heath, Donald F.↗

Application of the Core Flight System to a Lunar Rover

Resource Prospector (RP) is a lunar mission sponsored by NASAs Advanced Exploration Systems (AES) division, that aims to study in-situ resource utilization (ISRU) feasibility and technologies on the surface of the moon. The RP missions lunar surface segment includes a rover equipped with with a suite of instruments specifically designed to measure and map volatiles both at the surface and in the subsurface. Of particular interest is the quantity and state of volatiles in permanently shadowed regions. To conduct the mission, ground system operators will remotely drive the rover, directing it to waypoints along the surface in order to achieve measurement objectives. At selected locations, an onboard drill will be deployed to collect material and obtain direct measurements of the subsurface constituents. RP is currently planned for launch in 2022. RP is managed at NASA Ames Research Center. The RP Rover is being designed and developed by NASA Johnson Space Center (JSC) in partnership with NASA Ames. NASA Kennedy Space Center (KSC) is responsible for the Honeybee drilling system and science payload.In order to better understand the technical challenges and demonstrate capability, in 2015 the RP project developed a rover testbed (known as RP15). In this mission in a year, a rover was designed, developed, and outfitted with science instruments and a drill. The rover was operated from a remote operations center, and operated in an outdoor lunar rock yard at Johnson space center. The study was a resounding success meeting all objectives. The RP Rover software architecture and development processes were based on the successful Lunar Atmosphere and Dust Environment Explorer spacecraft. This architecture is built on the Core Flight System software and an interface to MatlabSimulink auto-generated software components known as the Simulink Interface Layer (SIL). The application of this lunar satellite inspired framework worked well for the rover application, and is currently being planned for the mission. This presentation provides an overview of the architecture and processes, and describes some of the changes and challenges for the rover application.

CFS↗

Application of CFS to a Lunar Rover: Resource Prospector (RP)

Resource Prospector (RP) is a lunar mission sponsored by NASA's Advanced Exploration Systems (AES) division, that aims to study in-situ resource utilization (ISRU) feasibility and technologies on the surface of the moon. The RP mission's lunar surface segment includes a rover equipped with with a suite of instruments specifically designed to measure and map volatiles both at the surface and in the subsurface. Of particular interest is the quantity and state of volatiles in permanently shadowed regions. To conduct the mission, ground system operators will remotely drive the rover, directing it to waypoints along the surface in order to achieve measurement objectives. At selected locations, an onboard drill will be deployed to collect material and obtain direct measurements of the subsurface constituents. RP is currently planned for launch in 2022. RP is managed at NASA Ames Research Center. The RP Rover is being designed and developed by NASA Johnson Space Center (JSC) in partnership with NASA Ames. NASA Kennedy Space Center (KSC) is responsible for the Honeybee drilling system and science payload. In order to better understand the technical challenges and demonstrate capability, in 2015 the RP project developed a rover testbed (known as RP15). In this mission in a year, a rover was designed, developed, and outfitted with science instruments and a drill. The rover was operated from a remote operations center, and operated in an outdoor lunar rock yard at Johnson space center. The study was a resounding success meeting all objectives. The RP Rover software architecture and development processes were based on the successful Lunar Atmosphere and Dust Environment Explorer spacecraft. This architecture is built on the Core Flight System software and an interface to Matlab/Simulink auto-generated software components known as the Simulink Interface Layer (SIL). The application of this lunar satellite inspired framework worked well for the rover application, and is currently being planned for the mission. This presentation provides an overview of the architecture and processes, and describes some of the changes and challenges for the rover application.

RP↗

The Petrogenetic History of the Jezero Crater Delta Front From Microscale Observations By the Mars 2020 PIXL Instrument

On ~sol 370 of the Perseverance rover mission, the Mars 2020 Science Team completed its investigation of igneous units of the Jezero crater floor and directed Perseverance to drive towards the topographic scarp that marks the interface between the crater floor and Jezero’s western delta. The “Delta Front Campaign” consisted of close-up investigation and sampling of lithologies located there. Here, we report on the major findings relevant to the provenance and diagenetic history of these lithologies deduced from measurements made by the Planetary Instrument for X-ray Lithochemistry (PIXL), a microfocus X-ray fluorescence (XRF) microscope. Data were collected from two sections at Cape Nukshak and Hawksbill Gap; outcrop and member names are from. Lithologies are described here in order from base to top of each section. For investigation locations, see: https://mars.nasa.gov/mars2020/mission/.

J.A. Hurowitz↗

Materials Processing R&D with a Free Electron Laser

A unique light source to explore and develop laser-based processes may be based on a free electron laser driven by an energy-recovering linac. It can address much of the vast "white space" between the output wavelengths of conventional fixed-frequency lasers. The greatest success of conventional lasers is in delivering great energy intensity for ever-shorter pulse duration with increasing average power. They serve as sources of spatio-temporally dense electronic excitation, which can be converted to heat, especially in metals. In contrast, the inherent tunability of the FEL provides opportunity for channeling energy into specific vibrational pathways in a material to achieve desired effects. Organic materials offer a significant example, attracting as they do growing attention for next-generation photonics and electronics, with some applications already commercialized. Present fabrication techniques based on solvents or evaporation set limits on materials selection. Tuning the FEL to an IR absorption band, on the other hand, offers a path to molecule-selective energy deposition, enabling pulsed laser deposition, processing, and analysis of otherwise intractable materials. The UV FEL now coming into operation at JLab will offer further opportunities, as it will be able to drive electronic transition directly as well as the vibrational transitions accessible with the IR FEL. Authored by Jefferson Science Associates LLC under U.S.DOE Contract No. DE-AC05-06OR23177

Kelley, Michael↗

Jamming and diode effects for vortices in Nanostructured Superconductors

We examine jamming and ratchet effects for vortex matter in superconductors with asymmetric funnel geometries. We show that the vortex-vortex interactions can induce a clogging or jamming effect where it becomes increasingly difficult for the vortices to move through the system. We also find that commensurability effects can arise when certain vortex configurations form highly symmetrical structures in the funnel plaquettes. Due to the asymmetry, the critical currents are different for driving in different directions, leading to a diode effect. We also discuss other possible geometries that could be used to explore jamming in vortex matter.

36 MATERIALS SCIENCE↗

Shapiro steps and stability of skyrmions interacting with alternating anisotropy under the influence of ac and dc drives

Here we use atomistic simulations to examine the sliding dynamics of a skyrmion in a two-dimensional system containing a periodic one-dimensional stripe pattern of variations between low and high values of the perpendicular magnetic anisotropy. The skyrmion changes in size as it crosses the interface between two anisotropy regions. On applying combined dc and ac driving in either parallel or perpendicular directions, we observe a wide variety of Shapiro steps, Shapiro spikes, and phase-locking phenomena. The phase-locked orbits have two-dimensional dynamics due to the gyrotropic or Magnus dynamics of the skyrmions and are distinct from the phase-locked orbits found for strictly overdamped systems. Along a given Shapiro step when the ac drive is perpendicular to the dc drive, the velocity parallel to the ac drive is locked while the velocity in the perpendicular direction increases with increasing drive to form Shapiro spikes. At the transition between adjacent Shapiro steps, the parallel velocity jumps up to the next step value, and the perpendicular velocity drops. The skyrmion Hall angle shows a series of spikes as a function of increasing dc drive, where the jumps correspond to the transition between different phase-locked steps. At high drives, the Shapiro steps and Shapiro spikes are lost. When both the ac and dc drives are parallel to the stripe periodicity direction, Shapiro steps appear, while if the dc drive is parallel to the stripe periodicity direction and the ac drive is perpendicular to the stripe periodicity, then there are only two locked phases, and the skyrmion motion consists of a combination of sliding along the interfaces between the two anisotropy values and jumping across the interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

How Driving Volatility in Time to Collision Relates to Crash Severity in a Naturalistic Driving Environment

The sequence of instantaneous driving decisions and its variations, known as driving volatility, can be a leading indicator of unsafe driving practices. The research issue is to characterize volatility in instantaneous driving decisions in longitudinal and lateral direction and to seek an understanding of how driving volatility relates to crash severity. By using a unique real-world naturalistic driving database from the SHRP 2, a test set of 671 crash events featuring around 0.2 million temporal samples of real-world driving are analyzed. Based on different driving performance measures, 16 different volatility indices are created. The volatility indices are then linked with individual crash events including information on crash severity, drivers’ pre-crash maneuvers and behaviors, secondary tasks and durations, and other factors. As driving volatility prior to crash involvement can have different components, an in-depth analysis is conducted using the aggregate as well as segmented (based on time to collision) real-world driving data. To account for the issues of observed and unobserved heterogeneity, fixed and random parameter ordered models with heterogeneity in parameter means are estimated. The findings suggest that greater driving volatility (both in longitudinal and lateral direction) prior to crash occurrence increases the likelihood of police reportable or severe crash events. Importantly, compared to the effect of volatility in longitudinal acceleration on crash outcomes, the effect of volatility in longitudinal deceleration is significantly greater in magnitude. Methodologically, the random parameter models with heterogeneity-in-means significantly outperformed both the fixed parameter and random parameter counterparts. The relevance of the findings to the development of proactive behavioral countermeasures for drivers is discussed.

Wali, Behram↗

Demonstration of Cross-Resonance Gates with Resonator-Assisted ZZ Cancellation

We present the characterization of a CNOT gate realized by combining cross-resonance interaction with resonator-assisted ZZ cancellation in fixed-frequency transmons on a Rigetti–SQMS co-developed quantum processor. Extending earlier work on dynamical ZZ cancellation via off-resonant resonator drives [1], we demonstrate a direct CNOT gate implementation achieved through two microwave drives on the transmons that generate a CX rotation in the |10⟩−|11⟩ subspace while selectively darkening the |00⟩−|01⟩ transition. This tunable-coupler-free approach enables high-fidelity gates and enhances the scalability of superconducting quantum architectures. [1] Z. Huang et al., Phys. Rev. Applied 22, 034007 (2024)

Heidler, Paul [Fermilab]↗

NASA DEVELOP’s Approach to Experiential Learning

The DEVELOP Program, part of NASA’s Applied Sciences’ Capacity Building Program, connects decision makers and early career individuals through rapid 10-week feasibility studies. These projects utilize Earth observation assets to address environmental issues and are conducted by small, interdisciplinary teams who work autonomously under the guidance of a cohort of science advisors. The teams tailor their research to create end products that support partner decision making processes. The connection to real-world decision making and direct communication with partner organizations drives meaningful experiences for DEVELOP participants that are directly applicable to future work in the geosciences. This poster will share DEVELOP’s model for offering meaningful experiences to its participants, address lessons learned over the past 20+ years, and highlight a variety of testimonials.

Capacity Building↗

Integrated Traction Drive Thermal Management: Keystone Project 3

The presentation represents a report of accomplishments during FY 2022 and is prepared for 2022 DOE VTO Annual Merit Review. The project goal is facilitation of achieving DOE 2025 target of 33 kW/L system power density for an electric traction drive through support of other EDT consortium members in design and development of thermal management systems for their respective integrated drive concepts. Namely, identifying pathways enabling high-performance, compact, and reliable integrated electric drives. Specific objectives are: 1) Research and evaluation of motor-integrated power electronics packaging technologies and thermal management approaches. 2) Development of thermal management system and its sub-components to enable integrated electric drive DOE power density targets in collaboration with project partners. 3) Supporting activities of DOE's Electric Drive Technologies (EDT) consortium members, Oak Ridge National Laboratory (ORNL) and University of Wisconsin research teams in thermal management component design and thermal modeling of their integrated traction drives. 4) Identifying candidate driveline fluids suitable for direct cooling of traction-drive components and high-voltage power electronics and evaluate their convective cooling performance.

ADVANCED PROPULSION SYSTEMS↗

A technique for extending by ∼10{sup 3} the dynamic range of compact proton spectrometers for diagnosing ICF implosions on the National Ignition Facility and OMEGA

Wedge Range Filter (WRF) proton spectrometers are routinely used on OMEGA and the NIF for diagnosing ρR and ρR asymmetries in direct- and indirect-drive implosions of D{sup 3}He-, D{sub 2}-, and DT-gas-filled capsules. By measuring the optical opacity distribution in CR-39 due to proton tracks in high-yield applications, as opposed to counting individual tracks, WRF dynamic range can be extended by 10{sup 2} for obtaining the spectral shape, and by 10{sup 3} for mean energy (ρR) measurement, corresponding to proton fluences of 10{sup 8} and 10{sup 9} cm{sup −2}, respectively. Using this new technique, ρR asymmetries can be measured during both shock and compression burn (proton yield ∼10{sup 8} and ∼10{sup 12}, respectively) in 2-shock National Ignition Facility implosions with the standard WRF accuracy of ±∼10 mg/cm{sup 2}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Oblique electron-cyclotron-emission radial and phase detector of rotating magnetic islands applied to alignment and modulation of electron-cyclotron-current-drive for neoclassical tearing mode stabilization

A two channel oblique electron cyclotron emission (ECE) radiometer was installed on the DIII-D tokamak and interfaced to four gyrotrons. Oblique ECE was used to toroidally and radially localize rotating magnetic islands and so assist their electron cyclotron current drive (ECCD) stabilization. In particular, after manipulations operated by the interfacing analogue circuit, the oblique ECE signals directly modulated the current drive in synch with the island rotation and in phase with the island O-point, for a more efficient stabilization. Apart from the different toroidal location, the diagnostic view is identical to the ECCD launch direction, which greatly simplified the real-time use of the signals. In fact, a simple toroidal extrapolation was sufficient to lock the modulation to the O-point phase. This was accomplished by a specially designed phase shifter of nearly flat response over the 1-7 kHz range. Moreover, correlation analysis of two channels slightly above and below the ECCD frequency allowed checking the radial alignment to the island, based on the fact that for satisfactory alignment the two signals are out of phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamics of Sheared Granular Materials

This work focuses on the properties of sheared granular materials near the jamming transition. The project currently involves two aspects. The first of these is an experiment that is a prototype for a planned ISS (International Space Station) flight. The second is discrete element simulations (DES) that can give insight into the behavior one might expect in a reduced-g environment. The experimental arrangement consists of an annular channel that contains the granular material. One surface, say the upper surface, rotates so as to shear the material contained in the annulus. The lower surface controls the mean density/mean stress on the sample through an actuator or other control system. A novel feature under development is the ability to 'thermalize' the layer, i.e. create a larger amount of random motion in the material, by using the actuating system to provide vibrations as well control the mean volume of the annulus. The stress states of the system are determined by transducers on the non-rotating wall. These measure both shear and normal components of the stress on different size scales. Here, the idea is to characterize the system as the density varies through values spanning dense almost solid to relatively mobile granular states. This transition regime encompasses the regime usually thought of as the glass transition, and/or the jamming transition. Motivation for this experiment springs from ideas of a granular glass transition, a related jamming transition, and from recent experiments. In particular, we note recent experiments carried out by our group to characterize this type of transition and also to demonstrate/ characterize fluctuations in slowly sheared systems. These experiments give key insights into what one might expect in near-zero g. In particular, they show that the compressibility of granular systems diverges at a transition or critical point. It is this divergence, coupled to gravity, that makes it extremely difficult if not impossible to characterize the transition region in an earth-bound experiment. In the DE modeling, we analyze dynamics of a sheared granular system in Couette geometry in two (2D) and three (3D) space dimensions. Here, the idea is to both better understand what we might encounter in a reduced-g environment, and at a deeper level to deduce the physics of sheared systems in a density regime that has not been addressed by past experiments or simulations. One aspect of the simulations addresses sheared 2D system in zero-g environment. For low volume fractions, the expected dynamics of this type of system is relatively well understood. However, as the volume fraction is increased, the system undergoes a phase transition, as explained above. The DES concentrate on the evolution of the system as the solid volume fraction is slowly increased, and in particular on the behavior of very dense systems. For these configurations, the simulations show that polydispersity of the sheared particles is a crucial factor that determines the system response. Figures 1 and 2 below, that present the total force on each grain, show that even relatively small (10 %) nonuniformity of the size of the grains (expected in typical experiments) may lead to significant modifications of the system properties, such as velocity profiles, temperature, force propagation, and formation shear bands. The simulations are extended in a few other directions, in order to provide additional insight to the experimental system analyzed above. In one direction, both gravity, and driving due to vibrations are included. These simulations allow for predictions on the driving regime that is required in the experiments in order to analyze the jamming transition. Furthermore, direct comparison of experiments and DES will allow for verification of the modeling assumptions. We have also extended our modeling efforts to 3D. The (preliminary) results of these simulations of an annular system in zero-g environment will conclude the presentation.

Kondic, Lou↗