Search NASA⌕ Search

SEARCH · Search NASA

Results for “Distillates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

A novel synthesis of micrometer silica hollow sphere

Silica microcapsules (hollow spheres) were synthesized successfully by a novel CTAB-stabilized water/oil emulsion system mediated hydrothermal method. The addition of urea to a solution of aqueous phase was an essential step of the simple synthetic procedure of silica hollow spheres, which leads to the formation of silica hollow spheres with smooth shell during hydrothermal process. The intact hollow spheres were obtained by washing the as-synthesized solid products with distilled water to remove the organic components. A large amount of silanol groups were retained in the hollow spheres by this facile route without calcination. The morphologies and optical properties of the product were characterized by transmission electron microscopy, scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy. Furthermore, on the basis of a series of SEM observations, phenomenological elucidation of a mechanism for the growth of the silica hollow spheres has been presented.

36 MATERIALS SCIENCE↗

Soft chemistry synthesis and crystal structure of Mg{sub x}Cu{sub 3-x}V{sub 2}O{sub 6}(OH){sub 4}.2H{sub 2}O

Mg{sub x}Cu{sub 3-x}V{sub 2}O{sub 6}(OH){sub 4}.2H{sub 2}O (x {approx} 1), with similar crystal structure as volborthite Cu{sub 3}V{sub 2}O{sub 7}(OH){sub 2}.2H{sub 2}O, was successfully prepared by a soft chemistry technique. The method consists of mixing magnesium nitrate and copper nitrate with a boiling solution of vanadium oxide (obtained by reacting V{sub 2}O{sub 5} with few mL of 30 vol.% H{sub 2}O{sub 2} followed by addition of distilled water). When ammonium hydroxide NH{sub 4}OH 10% was added (pH 7.8), a green yellowish precipitate was obtained. Using X-ray powder diffraction data, its crystal structure has been determined by Rietveld refinement. Compared to volborthite, the vanadium coordination changes from tetrahedral VO{sub 4} to trigonal bipyramidal VO{sub 5}, and magnesium replaces copper, preferably, in the less distorted octahedron. At 300 deg. C, the phase formed is similar to the high pressure (HP) monoclinic Cu{sub 3}V{sub 2}O{sub 8} phase. However at higher temperature, 600 deg. C, the phase obtained is different from known Cu{sub 3}V{sub 2}O{sub 8} phases.

36 MATERIALS SCIENCE↗

Controlled synthesis of three-dimensional hierarchical Bi{sub 2}WO{sub 6} microspheres with optimum photocatalytic activity

Highlights: Black-Right-Pointing-Pointer The synthesized method is very simple. It can be widely used in the production. Black-Right-Pointing-Pointer The morphology is novel and the property is fine. Black-Right-Pointing-Pointer The formation of 3D hierarchical microsphere can be induced by changing the concentration of KNO{sub 3}. -- Abstract: Three-dimensional (3D) hierarchical Bi{sub 2}WO{sub 6} microsphere and octahedral Bi{sub 2}WO{sub 6} have been synthesized by a facile hydrothermal method using KNO{sub 3} solution and distilled water as solvent, respectively. The obtained products were characterized by X-ray diffraction, scanning electron microscopy, N{sub 2} adsorption/desorption, and UV-vis diffuse reflectance spectroscopy in detail. The concentration of KNO{sub 3} played a key role in the formation of 3D hierarchical Bi{sub 2}WO{sub 6} microspheres. A possible formation mechanism of Bi{sub 2}WO{sub 6} microsphere was proposed. The photocatalytic activity of the as-synthesized products was evaluated by monitoring the degradation of MB solution under sunlight irradiation. It was found that the photocatalytic activity of the 3D hierarchical Bi{sub 2}WO{sub 6} microsphere was superior to the octahedral Bi{sub 2}WO{sub 6}, which was attributed to the larger surface area and special hierarchical structure of Bi{sub 2}WO{sub 6} microsphere.

36 MATERIALS SCIENCE↗

Synthesis and characterization of flower-like CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.3) microspheres

Graphical abstract: In this paper, flower-like CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.3) microspheres were prepared via biomolecule-assisted solvothermal rate with CuCl{sub 2}{center_dot}2H{sub 2}O, GaCl{sub 3}, InCl{sub 3} and L-cystine as raw materials. UV-vis absorption spectrum showed that the band gap of CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} microspheres was about 2.427 eV. Highlights: Black-Right-Pointing-Pointer We reported a small biomolecule-assisted route to synthesis CuIn{sub 0.3}Ga{sub 0.7}S{sub 2}. Black-Right-Pointing-Pointer The possible mechanisms of flower-like CuIn{sub 0.3}Ga{sub 0.7}S{sub 2} microspheres were proposed. Black-Right-Pointing-Pointer The as-prepared CuIn{sub 0.3}Ga{sub 0.7}S{sub 2} products were investigated by XRD, XPS, FESEM and TEM. Black-Right-Pointing-Pointer The optical properties were investigated by UV-vis spectroscopy and Raman spectrum. -- Abstract: We report the formation and characterization of the flower-like CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.3) microspheres using CuCl{sub 2}{center_dot}2H{sub 2}O, GaCl{sub 3}, InCl{sub 3} and L-cystine in the mixed solvent of ethylene glycol and distilled water (1:2, v/v) at 200 Degree-Sign C for 24 h. XRD results indicated that the CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} nanostructures have a (1 1 2) preferred orientation. The EDS and XPS analyses of the sample revealed that Cu, In, Ga and S were present in an atomic ratio of approximately 1:0.7:0.3:2. FESEM and TEM images showed that the product was microspheres, consisting of nanoplates with the thickness of about 20 nm. The optical properties were investigated by ultraviolet-visible (UV-vis) absorption spectroscopy and Raman spectroscopy. UV-vis absorption spectrum indicated that the band gap of as-synthesized flower-like CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} microspheres was about 2.427 eV. Raman spectrum of the obtained CuIn{sub 0.7}Ga{sub 0.3}S{sub 2} exhibited a high-intensity peak at 302 cm{sup -1} could be assigned as A1-mode.

36 MATERIALS SCIENCE↗

Solution precursor plasma deposition of nanostructured CdS thin films

Highlights: Black-Right-Pointing-Pointer Inexpensive process with capability to produce large scale nanostructured coatings. Black-Right-Pointing-Pointer Technique can be employed to spray the coatings on any kind of substrates including polymers. Black-Right-Pointing-Pointer The CdS coatings developed have good electrical conductivity and optical properties. Black-Right-Pointing-Pointer Coatings possess large amount of particulate boundaries and nanostructured grains. -- Abstract: Cadmium sulfide (CdS) films are used in solar cells, sensors and microelectronics. A variety of techniques, such as vapor based techniques, wet chemical methods and spray pyrolysis are frequently employed to develop adherent CdS films. In the present study, rapid deposition of CdS thin films via plasma spray route using a solution precursor was investigated, for the first time. Solution precursor comprising cadmium chloride, thiourea and distilled water was fed into a DC plasma jet via an axial atomizer to create ultrafine droplets for instantaneous and accelerated thermal decomposition in the plasma plume. The resulting molten/semi-molten ultrafine/nanoparticles of CdS eventually propel toward the substrate to form continuous CdS films. The chemistry of the solution precursor was found to be critical in plasma pyrolysis to control the stoichiometry and composition of the films. X-ray diffraction studies confirmed hexagonal {alpha}-CdS structure. Surface morphology and microstructures were investigated to compare with other synthesis techniques in terms of process mechanism and structural features. Transmission electron microscopy studies revealed nanostructures in the atomized particulates. Optical measurements indicated a decreasing transmittance in the visible light with increasing the film thickness and band gap was calculated to be {approx}2.5 eV. The electrical resistivity of the films (0.243 {+-} 0.188 Multiplication-Sign 10{sup 5} {Omega} cm) was comparable with the literature values. These nanostructured polycrystalline CdS films could be useful in sensing and solar applications.

36 MATERIALS SCIENCE↗

Optical properties of petal-like aggregated nanocrystalline zinc oxide synthesized by laser ablation

Highlights: Black-Right-Pointing-Pointer Petal like ZnO nanocrystals are synthesized by high frequency laser ablation in water. Black-Right-Pointing-Pointer Optical band gap of ZnO nanocrystals was tunable by changing the laser pulse energy. Black-Right-Pointing-Pointer Nonlinear optical properties and limiting threshold were obtained by Z-scan technique. -- Abstract: The results of the investigations carried out on the third-order nonlinearity in zinc oxide (ZnO) nanocrystals (NCs) by Z-scan technique are included in this paper. ZnO NCs show negative nonlinearity and good nonlinear absorption behavior at 532 nm. The third-order optical susceptibility {chi}(3) increases with enlargement of NCs due to the size dependent enhancement of exciton oscillator strength. The synthesis of ZnO NCs was performed by laser ablation from a high-purity metallic target of Zn in distilled water medium. For the ablation process, a high frequency pulsed Nd:YAG laser was employed operating at 532 nm with 100 ns pulse duration. UV-vis absorption spectroscopy illustrated the enhancement of the size of ZnO NCs upon increasing the laser pulse energy applied in ablation process. Accordingly the corresponding optical band gap (E{sub g}) decrease by increasing the size of NCs. X-ray diffraction (XRD) associated with transmission electron microscopy (TEM) was utilized to characterize the crystalline phase and also for determining the ZnO NCs morphology.

36 MATERIALS SCIENCE↗

Synthesis and photocatalytic applications of nano-sized zinc-doped mesoporous titanium oxide

Graphical abstract: Nano-sized mesoporous titanium oxide (T0) and zinc-doped nano-sized mesoporous titanium oxides (TA–TD) were synthesized by a simple method and characterized by different techniques. All materials have been studied in the photocatalytic degradation of methylene blue under UV light, observing that the decrease in the band gap of the materials seems to have a positive influence in the photocatalytic activity. Display Omitted Highlights: ► Nano-sized mesoporous TiO{sub 2} and Zn-doped TiO{sub 2} have been synthesized and characterized. ► Band gap of the Zn-doped TiO{sub 2} decreases when the Zn amount increases. ► Materials consist of porous particles (10–20 nm). ► The photocatalytic degradation of MB has been studied for these materials. ► A decrease in the band gap of the materials enhances the photocatalytic activity. -- Abstract: The synthesis of nano-sized mesoporous titanium oxide (T0) is described by an easy synthetic method which consists of the reaction of titanium tetraisopropoxide and a solution of HNO{sub 3} in water (pH 2.0) and the subsequent elimination of the volatiles by simple distillation. On the other hand, zinc-doped mesoporous titanium oxides (TA–TD) were synthesized using the same method but adding increasing amounts of Zn(NO{sub 3}){sub 2} to give materials which contain between 0.12 and 6.17 wt.% Zn. Upon the calcinations of all the obtained materials, characterization has been carried out by using N{sub 2} adsorption–desorption isotherms, powder X-ray diffraction, X-ray fluorescence, UV–vis spectrometry, solid state {sup 47,49}Ti NMR spectroscopy and transmission electronic microscopy (TEM). The results show that all these materials are mesoporous, with BET surfaces between 54 and 121 m{sup 2}/g and similar pore diameters between 6.4 and 9.1 nm. XRD studies show that these materials mainly consist of anatase and very small amounts of brookite. TEM technique shows the small particle sizes of the corresponding materials (from 10 to 20 nm) and the porous structure of parallel and straight channels for T0, TA, TB and TC while the order in the porosity of the system is lost in TD. In addition, studies of the Kubelka-Munk function show that the band gap energy of the synthesized materials decreases with the increase of the Zn amount of the material from 3.24 (for T0) to 2.91 eV (for TD). All the studied materials have been studied in the photocatalytic degradation of methylene blue (MB) under UV light, observing that the decrease in the band gap of the materials seems to have a positive influence in the photocatalytic activity.

36 MATERIALS SCIENCE↗

Characterization of supported TiO{sub 2}-based catalysts green-prepared and employed for photodegradation of malodorous DMDS

Graphical abstract: Display Omitted Highlights: ► We prepare rutile-TiO{sub 2} based catalysts using a simple and eco-efficient method. ► TiO{sub 2} based catalysts coated on supporting materials have large BET surface areas. ► Supported TiO{sub 2} based catalysts efficiently degrade malodorous DMDS. -- Abstract: Titanium dioxide (TiO{sub 2})-based catalysts coated onto two supporting materials (Pyrex glass beads and porous polypropylene fibers) in laboratory have been prepared and characterized. A modified preparation process at low temperature involving the addition of distilled water, aqueous ammonia, and ferrous sulfate, respectively, was used to enhance the spontaneous precipitation of three TiO{sub 2}-based catalysts. The Brunauer–Emmett–Teller surface area of three catalysts was ranged from 160.1 to 202.7 m{sup 2}/g. The surface morphology of three catalysts was identified by a scanning electron microscopy equipped with an X-ray energy dispersive spectrometer. The photocatalytic degradation of dimethyldisulfide was investigated using the supported TiO{sub 2}-based catalysts. The original dimethyldisulfide almost was degraded within 2 h. A similar photocatalytic activity on degrading dimethyldisulfide was demonstrated in comparison with commercial catalysts. Simplicity, low cost, low energy consumption, and solvent-free are the advantages of this proposed method which can be used to photodecompose environmental organic pollutants effectively without heat treatment.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis and magnetic properties of CuO hollow microspheres

Graphical abstract: - Highlights: • CuO hollow microspheres were synthesized through hydrothermal route. • The possible growth mechanism was proposed according to the experimental results. • CuO hollow microspheres show an anomalous ferromagnetic behavior at 5 K and 300 K. - Abstract: In the present work, CuO hollow microspheres with the diameter about 2 μm were successfully synthesized through a facile hydrothermal method. The phase purity, morphologies and structure features of the as obtained products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy, respectively. It was found that reaction temperature, reaction time and different volume ratios of ethanol and distilled water played important roles on the morphologies of the obtained CuO hollow microspheres. The possible formation mechanism was also proposed according to the corresponding experimental results. The magnetic properties were investigated by superconducting quantum interference device, revealing that the CuO hollow microspheres exhibited an anomalous ferromagnetic behavior at 5 K and 300 K. At the same time, the origin of the ferromagnetism in CuO hollow microspheres was also discussed.

36 MATERIALS SCIENCE↗

Aqueous solution synthesis and photoluminescence properties of two-dimensional dendritic PbWO{sub 4} nanostructures

Graphical abstract: PbWO{sub 4} two-dimensional dendritic nanostructures (2DDNs) were prepared at room temperature through a facile aqueous solution route using only Pb(NO{sub 3}){sub 2} and Na{sub 2}WO{sub 4} as reaction reagents and distilled water as solvent. - Highlights: • Two-dimensional dendritic PbWO4 nanostructures were prepared through a facile aqueous solution route at room temperature. • A “two-step” growth mechanism was proposed for the formation of two-dimensional dendritic PbWO4 nanostructures. • The two-dimensional dendritic PbWO4 nanostructures exhibit good photoluminescence properties. - Abstract: PbWO{sub 4} two-dimensional dendritic nanostructures (2DDNs) were prepared at room temperature through a facile aqueous solution route. X-ray diffraction, scanning electron microscope, transmission electron microscope and X-ray energy dispersive spectrometer were used to characterize the obtained samples. The PbWO{sub 4} 2DDN was in one plane, with a nearly circular shape and sizes of ∼10 μm. The PbWO{sub 4} 2DDNs were composed of curved nanowires around 200 nm in diameters, which were connected together to form a network nanostructure. The effects of reaction conditions including the concentration of react reagents, the reaction temperature, and the reaction time were systematically investigated and a possible formation mechanism for the formation of 2DDNs was proposed. The optical properties, such as UV–vis spectra and photoluminescence spectra of PbWO{sub 4}, were studied. The advantages of this synthetic route include the first synthesis of PbWO{sub 4} 2DDNs, simple synthetic procedure, room reaction temperature, and high reproducibility of the process.

36 MATERIALS SCIENCE↗

The experimental study of the effect of microwave on the physical properties of multi-walled carbon nanotubes

Highlights: • We study the microwave effect on the multi-walled carbon nanotubes (MWCNTs). • We examine the non uniform heating effect on the physical structure of MWCNTs. • We examine the purification of MWCNTs by microwave. • We analyze the thermal characteristics of microwave treated MWCNTs. - Abstract: This paper reports the effect of microwave on the physical properties of multi-walled carbon nanotubes (MWCNTs) where different power levels of microwave were applied on MWCNTs in order to apprehend the effect of microwave on MWCNTs distinctly. A low energy ball milling in aqueous circumstance was also applied on both MWCNTs and microwave treated MWCNTs. Temperature profile, morphological analysis by field emission scanning electron microscopy (FESEM), defect analysis by Raman spectroscopy, thermal conductivity, thermal diffusivity as well as heat transfer coefficient enhancement ratio were studied which expose some strong witnesses of the effect of microwave on the both purification and dispersion properties of MWCNTs in base fluid distilled water. The highest thermal conductivity enhancement (6.06% at 40 °C) of MWCNTs based nanofluid is achieved by five minutes microwave treatment as well as wet grinding at 500 rpm for two hours.

36 MATERIALS SCIENCE↗

Growth, structural, optical, thermal and mechanical properties of cytosinium hydrogen selenite: A novel nonlinear optical single crystal

Highlights: • Growth of bulk single crystals of cytosinium hydrogen selenite (CHS) is reported. • Dielectric constant of CHS is measured as a function of Frequency and temperature. • Lower cut off value of UV–vis-NIR spectrum of CHS crystal is observed at 210 nm. • Meyer’s index value of CHS crystal calculated identifies it as a soft material. • Powder SHG efficiency of CHS is about 1.5 times that of KDP crystal. - Abstract: A novel nonlinear optical single crystal of cytosinium hydrogen selenite was grown from aqueous solution of cytosinium hydrogen selenite by slow solvent evaporation method at room temperature. The structural properties of grown crystal have been studied by single crystal and powder X-ray diffraction analysis. Presence of various functional groups was identified from Fourier transform infrared spectroscopy. The optical transmittance and absorbance spectra were recorded by UV–vis-NIR spectrometer and the grown crystal possesses good transparency in the entire visible region. The dielectric constant and dielectric loss of the crystal were calculated as a function of frequency at different temperatures. The mechanical strength of the cytosinium hydrogen selenite crystal was estimated using Vicker’s microhardness tester. Etch patterns of the cytosinium hydrogen selenite crystal were obtained using distilled water as etchant for different etching time. Second harmonic generation efficiency tested using Nd:YAG laser is about 1.5 times that of KDP.

36 MATERIALS SCIENCE↗

Recovery of dilute aqueous butanol by membrane vapor extraction with dodecane or mesitylene

A novel, nearly isothermal, nonselective-membrane separation process, membrane vapor extraction (MVE), efficiently recovers butanol from a dilute aqueous solution, for example, from a fermentation broth (Liu et al., 2015). In MVE, feed and solvent liquids are not in contact; they are separated by vapor. Therefore, compared to conventional extraction, MVE avoids formation of difficult-to-separate emulsions. In MVE, a semi-volatile aqueous solute (e.g., butanol) vaporizes at the upstream side of a membrane, diffuses as a vapor through the membrane pores, and subsequently condenses and dissolves into a high-boiling nonpolar solvent, favorable to the solute but not to water. Design analysis of a 1.5-m long, 30-m 2 membrane-area countercurrent MVE unit for processing 2-wt% aqueous butanol by dodecane solvent at 40 °C indicates over 90% recovery of the feed butanol with essentially no water loss and with very low energy requirement (Liu et al., 2015). The separation factor is over 1500. However, the published design study gives no experimental evidence for the calculated MVE separation. Here, we present experimental data to validate the MVE process. We use an omniphobic (i.e., hydrophobic and oleophobic), 0.2-µm pore-diameter Versapor®200 R membrane (Pall Corporation, Exton, PA) housed in a 6-cm wide by 10-cm long plate-and-frame channeled flow cell with 0.8-cm gap thickness. Membrane transfer area is 28 cm 2 . The membrane flow cell is designed for minimal axial concentration change and is operated in the transient mode between two recirculating flow loops. 2-wt% aqueous butanol is extracted into dodecane or mesitylene at 25 or 40 °C. Also, 1.5-wt% furfural is extracted into dodecane at 40 °C. Since vapor transport across the membrane contributes minimal resistance, MVE performance is governed by mass transfer through feed and solvent boundary layers. Mass-transfer coefficients are determined from the Graetz-Lévêque analysis of laminar thin-slit flow (Bird et al., 2002). Predicted extraction performance agrees well with experiment using no adjustable parameters. Finally, consistent with the initial multistage-design analysis (Liu et al., 2015), our new bench-scale experimental results confirm that MVE is a viable separation process to recover dilute semi-volatile biosolutes from water with minimal energy requirement. Preliminary analysis of downstream solute recovery from the extract via distillation is more efficient than that for pervaporation because of insignificant water carry over through the MVE membrane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Freestanding self-assembled sulfonated pentablock terpolymer membranes for high flux pervaporation desalination

Pervaporation desalination has several advantages over competing desalination technologies, most notably an ability to select for or against volatile organic compounds and the ability to process high salinity feeds at a low transmembrane pressure. Pervaporation has not been commercialized for desalination applications because of its energy intensity. However, emerging processes such as hydraulic fracturing produce high total dissolved solids (>30-45 g/L) byproduct streams that exceed the operational limits of traditional reverse osmosis and could be treated by pervaporation. Here, we demonstrate free-standing pervaporation membranes with excellent permeance and high salt removal based on a partially sulfonated pentablock terpolymer with the tradename Nexar™. Pervaporation membranes were easily cast from this material with desalination performances comparable or superior to commercially available membranes. We found that the polymer degree of sulfonation and casting solvent polarity had a significant impact on the membranes’ water uptake but only a modest impact on the pervaporation desalination performance. Membranes with a degree of sulfonation of 52% (2.0 meq g –1 IEC) and a casting solution composed of 50 wt% n-propanol and 50 wt% toluene achieved a water flux of 3.32 kg m -2 h -1 (permeance 135 kg m -2 h -1 bar -1 ) with 99.5% salt removal in pervaporation from a 32 g/L –1 sodium chloride feed solution at room temperature. We demonstrated that dense, non-porous NexarTM pervaporation membrane permeance and salt separation performance were superior to commercial pervaporation membranes and equivalent to commercial membrane distillation membranes, which have much larger pores. Here, this study demonstrates that commercially available sulfonated pentablock terpolymers are excellent membranes for pervaporation desalination because of their ease of casting and excellent performance.

42 ENGINEERING↗

Highly tunable structure-by-design polymer brush membranes for organic solvent nanofiltration

Synthetic polymeric nanofiltration membrane processes offer an alternate low-energy option to energy-intensive distillation to fractionate similar size organic solvents for chemical, petroleum, food and biotechnology industries. Here, in this study, we synthesize and test a new class of structure-by-design hydrophilic polymeric brush membranes, that address the limitations of commercial polymer membranes, are tunable and exhibit commercially relevant filtration performance. Because these brush membranes are grafted by Single Electron Transfer-Living Radical Polymerization (SET-LRP) and replace statistically random phase inversion or interfacial polymerization used for synthesizing commercial polymer membranes, their porous structure can be remodeled by varying their morphology and chemistry. We graft hydroxyethyl methacrylate (HEMA) brush structures with short and long crosslinkers, demonstrate two competing phenomena - pore stiffening and opening - and obtain high selectivity at reasonable permeability for commercially relevant methanol/toluene separation. This new class of stable, tunable, and scalable membranes offers exciting opportunities to reduce energy for separation of organic solvents.

42 ENGINEERING↗

Inhibition of asphaltene aggregation using deep eutectic solvents: COSMO-RS calculations and experimental validation

Asphaltene precipitation/deposition adversely affects various oil and gas processes, such as oil recovery, transportation, and petroleum processing. The resulting increase in viscosity of crude oil decreases distillate yields creating unstable phase separation. Deep eutectic solvents (DESs) have recently gained interest as inhibitors of asphaltene aggregation. The goal of the present study is to derive the mechanism of inhibition of petroleum asphaltene aggregation by a novel screening of DESs. An archipelago-based chemical structure of asphaltene was adopted for performing quantum chemical calculations. The structure was used in the conductor-like screening model for real solvents (COSMO-RS) model to screen potential DESs for asphaltene precipitation. It was found that DESs containing thymol were the most promising of the 153 DES combinations screened. The COSMO-RS predictions were validated experimentally using solubility data of asphaltene in DESs. Among the studied DESs, thymol-diphenyl ether provided the highest solubility for asphaltene, which was further validated using the experimental and the COSMO-RS predicted data. In addition, to characterize the structural interactions between asphaltene and DESs, Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR) measurements were performed. It was found that strong interaction between asphaltene and the DESs is responsible for the higher asphaltene dispersion. Finally, the present approach opens pathways to rationally design and understand the impact of structural variation of DESs based on their interactions with asphaltene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗