Results for “Expandable Structures” — Page 49

NASA NTRS1976

Observations of the Gum Nebula with a Fabry-Perot spectrometer

Scans have been made of H-alpha, 6584-A forbidden N II, 5007-A forbidden O III, and 5876-A He I emissions in selected directions in the Gum Nebula. Analyses of the line profiles and line intensities indicate that much of the emitting gas in the Gum Nebula is confined to an expanding shell which has a radius of about 125 pc, an expansion velocity of approximately 20 km/s, an emission measure which ranges from about 15 units to about 500 units, and a temperature near 11,000 K. The ultraviolet flux from zeta Pup and gamma-2 Vel appears to be capable of producing most of the observed ionization, although the origin of the shell structure and high expansion velocity is not certain.-

Reynolds, R. J.↗

NASA NTRS1984

Shear deformation plate continua of large double-layered space structures

The energy equivalence to construct equivalent continua for the actual lattice structure is described. An energy equivalent continuum is defined as that which has the same amount of strain and kinetic energies stored in it as the original lattice structure when both are subjected to the same loading conditions. The equivalent continuum is characterized by its strain and kinetic energies from which the constitutive relations and the equations of motion can be derived. A simple method to model large rigid jointed lattices as continuous media with couple stresses is presented. The transition from the discrete system to the continuous medium is achieved by expanding the displacements and the rotations of the nodal points in a Taylor series about a suitable chosen origin. Basic kinematic assumptions are introduced to insure that the assumptions used in deriving the governing equations of the modeled continuum are satisfied. The number of terms retained in the Taylor series expansion will depend upon the properties to be evaluated. This implies that the kind of continuum needed to model from the discrete lattice, before the actual properties are derived was to predetermined.

Hefzy, M. S.↗

NASA NTRS1990

Disintegration of liquid sheets

The development, stability, and disintegration of liquid sheets issuing from a two-dimensional air-assisted nozzle is studied. Detailed measurements of mean drop size and velocity are made using a phase Doppler particle analyzer. Without air flow the liquid sheet converges toward the axis as a result of surface tension forces. With airflow a quasi-two-dimensional expanding spray is formed. The air flow causes small variations in sheet thickness to develop into major disturbances with the result that disruption starts before the formation of the main break-up region. In the two-dimensional variable geometry air-blast atomizer, it is shown that the air flow is responsible for the formation of large, ordered, and small chaotic 'cell' structures.

Mansour, Adel↗

NASA NTRS1989

The glideslope approach

The problems associated with optimum approaches to an orbiting spacecraft at the completion of rendezvous are exacerbated when the maneuvering spacecraft is to dock with such large and extended structures as the NASA Space Station, which also has a torque equilibrium attitude due to which the docking port does not point directly into the orbital track. Attention is presently given to a candidate 'operationally optimum' approach to a local vertical-local horizontal stabilized target; this glideslope approach is derived on the basis of Hill's relative-motion equations, which have been expanded to encompass constant relative accelerations in a closed form solution. The motion is described in polar coordinates.

Pearson, Don J.↗

NASA NTRS2000

Chandra Observations of Hydra A

We present Chandra X-ray Observations of the Hydra A cluster of galaxies, and we report the discovery of structure in the central 80 kpc of the cluster's X-ray-emitting gas. The most remarkable structures are depressions in the X-ray surface brightness, approx. 25 - 35 kpc diameter, that are coincident with Hydra A's radio lobes. The depressions are nearly devoid of X-ray-emitting gas, and there is no evidence for shock-heated gas surrounding the radio lobes. We suggest the gas within the surface brightness depressions was displaced as the radio lobes expanded subsonically, leaving cavities in the hot atmosphere. The gas temperature declines from 4 keV at 70 kpc to 3 keV in the inner 20 kpc of the brightest cluster galaxy (BCG), and the cooling time of the gas is approx. 600 Myr in the inner 10 kpc. These properties are consistent with the presence of a approx. 34 solar mass/yr cooling flow within a 70 kpc radius. Bright X-ray emission is present in the BCG surrounding a recently-accreted disk of nebular emission and young stars. The star formation rate is commensurate with the cooling rate of the hot gas within the volume of the disk, although the sink for the material that may be cooling at larger radii remains elusive.

McNamara, Brian↗

NASA NTRS2015

Biomaterials Out of Thin Air: in Situ, On-Demand Printing of Advanced Biocomposites

Upmass is the single most significant limitation of our current space mission capability. Although biomaterials and biocomposites have mass, strength, flexibility, and self-healing properties that could significantly reduce upmass, their use is limited by the following drawbacks: Expensive, specific production. Many biomaterials can only be produced as part of significant support ecosystem; Inaccessible functional customization. The grain of wood, the porosity of bone, and so on are an integral part of the materials' desired mechanical properties, but are not deterministic when the material is naturally grown; Limited compositions. Most biomaterials (unlike metal, plastic, etc.) cannot be easily combined or modified to produce new materials. This project builds on recent advances in: Synthetic biology. Libraries of standardized genetic parts which can be used for controlled cellular material production, delivery, and binding; 3D printing. Commercial off-the-shelf components which can be used to make of a pico- to nanoliter cell deposition system; Tissue engineering. Proven cell-compatible support hydrogels and scaffolds can be modified to bind the deposited biomaterials of interest. Objectives: Feasibility and benefit analysis. Two mission contexts span the concept's scope (see below); Proof-of-concept demonstration. A simple grid of two proteins, fluorescent for easy detection, to validate the core technology concept; Proposed implementations for follow-on work. Avenues for future work on each core component (host cell, production control, material delivery, material binding, etc.); Complementary studies exploration. A survey of other emerging areas (in situ resource utilization, protein engineering, etc.) with the potential to multiply our technology's impact. Potential Impacts: This application could dramatically expand manufacturing capabilities on Earth and in space: In situ resource utilization. A far greater range of materials and products will be available from the limited palette offered by in situ resource extraction techniques; Reduced equipment and material upmass for off-Earth habitats. Ready- to-use highly specialized construction materials (radiation hardened, compressive/tensile, light or dense) from an extremely low starting mass; Structured biomaterial production. New ready-to-use macro, micro, and molecular manufacturing techniques for traditional biomaterials such as wood, bone and shell; New and novel biocomposite creation. The ability to create completely novel material composites from any base material that cells can be engineered to produce. Suggested Mission Contexts: ISS part manufacturing. A 'minimal working example' making a finished biomaterial part aboard the International Space Station; A long-term Mars habitat. 'Cradle-to-grave' use at a hypothetical Mars habitat, covering everything from tools to construction materials. Alternate Abstract: Imagine being able to print anything from tools and composite building materials to food and human tissues. Imagine being on Mars with the ability to replace any broken part, whether it's a part of your spacesuit, your habitat, or your own body. We propose a technique that would allow just that. By printing 3D arrays of cells engineered to secrete the necessary materials, the abundant in situ resources of atmosphere and regolith become organic, inorganic, or organic-inorganic composite materials. Such materials include novel, biologically derived materials not previously possible to fabricate.

habitats↗

NASA NTRS2015

Biomaterials Out of Thin Air: in Situ, On-demand Printing of Advanced Biocomposites

Upmass is the single most significant limitation of our current space mission capability. Although biomaterials and biocomposites have mass, strength, flexibility, and self-healing properties that could significantly reduce upmass, their use is limited by the following drawbacks: Expensive, specific production. Many biomaterials can only be produced as part of significant support ecosystem; Inaccessible functional customization. The grain of wood, the porosity of bone, and so on are an integral part of the materials' desired mechanical properties, but are not deterministic when the material is naturally grown; Limited compositions. Most biomaterials (unlike metal, plastic, etc.) cannot be easily combined or modified to produce new materials. This project builds on recent advances in: Synthetic biology. Libraries of standardized genetic parts which can be used for controlled cellular material production, delivery, and binding; 3D printing. Commercial off-the-shelf components which can be used to make of a pico- to nanoliter cell deposition system; Tissue engineering. Proven cell-compatible support hydrogels and scaffolds can be modified to bind the deposited biomaterials of interest. Objectives: Feasibility and benefit analysis. Two mission contexts span the concept's scope (see below); Proof-of-concept demonstration. A simple grid of two proteins, fluorescent for easy detection, to validate the core technology concept; Proposed implementations for follow-on work. Avenues for future work on each core component (host cell, production control, material delivery, material binding, etc.); Complementary studies exploration. A survey of other emerging areas (in situ resource utilization, protein engineering, etc.) with the potential to multiply our technology's impact. Potential Impacts: This application could dramatically expand manufacturing capabilities on Earth and in space: In situ resource utilization. A far greater range of materials and products will be available from the limited palette offered by in situ resource extraction techniques; Reduced equipment and material upmass for off-Earth habitats. Ready- to-use highly specialized construction materials (radiation hardened, compressive/tensile, light or dense) from an extremely low starting mass; Structured biomaterial production. New ready-to-use macro, micro, and molecular manufacturing techniques for traditional biomaterials such as wood, bone and shell; New and novel biocomposite creation. The ability to create completely novel material composites from any base material that cells can be engineered to produce. Suggested Mission Contexts: ISS part manufacturing. A 'minimal working example' making a finished biomaterial part aboard the International Space Station; A long-term Mars habitat. 'Cradle-to-grave' use at a hypothetical Mars habitat, covering everything from tools to construction materials. Alternate Abstract: Imagine being able to print anything from tools and composite building materials to food and human tissues. Imagine being on Mars with the ability to replace any broken part, whether it's a part of your spacesuit, your habitat, or your own body. We propose a technique that would allow just that. By printing 3D arrays of cells engineered to secrete the necessary materials, the abundant in situ resources of atmosphere and regolith become organic, inorganic, or organic-inorganic composite materials. Such materials include novel, biologically derived materials not previously possible to fabricate.

habitats↗

NASA NTRSDate not supplied

Application of Regolith Polymer Composite FFF Construction in Simulated Lunar Conditions

NASA’s Artemis program has the lofty goal of creating a sustained lunar presence to provide unprecedented opportunities for scientific discovery and to ensure American industry’s access to the unlimited resources and commercial potential in space. To achieve this goal, NASA must incrementally develop and expand its capabilities beyond the short lunar stays of the Apollo program to a robust continued presence with infrastructure and equipment to reduce mission risk by providing safer and more reliable access to the surface, its resources, and protection from the environment. Kennedy Space Center’s Swamp Works Granular Mechanics and Regolith Operations laboratory has partnered with AI SpaceFactory to develop the architectural and structural design of a robotically constructable unpressurized shelter. The shelter, called Lina is designed to protect astronauts and surface assets from radiation, meteoroid impact, moon quakes and thermal gradients. A Fused Filament Fabrication (FFF) construction process using regolith polymer composites was developed. The construction system and associated print parameters are discussed along with the environmental simulation equipment and a summary of test conditions. Test samples were printed in simulated lunar dirty thermal vacuum conditions (~-180 C, ~10-3 torr) and subjected to a series of tests. The resulting strength properties are summarized here, the full details of the material characteristics are provided in a related paper. Lina’s structural design criteria and the resulting initial structure design are detailed in two related papers, this paper presents an update to Lina’s design based on the achieved material strength properties. Finally, a scaled down version of the updated Lina was built on a regolith simulant surface using a novel anchoring technique in simulated lunar vacuum conditions.

lunar infrastructure↗

NASA NTRSDate not supplied

Autonomous Lunar Infrastructure Outfitting

The Automated Reconfigurable Mission Adaptive Digital Assembly Systems (ARMADAS) project at NASA Ames Research Center is developing autonomous infrastructure, instrumentation, and spacecraft assembly and manufacturing capabilities for next generation exploration and science missions, with a goal to change the cost scaling of these missions relative to mission size and duration. Using a building-block approach with a 'kit of parts' composed of ultra-light, high-performance mechanical metamaterials, simplified robots leverage the period environment to achieve high levels of autonomy and reliability for in-space and surface assembly of large-scale apertures, solar-arrays, towers, habitats, and other infrastructure. Robots and structure break down into a compact form factor for launch. By leveraging economies of scale and achieving high-packing ratios, ARMADAS technology can revolutionize space missions by breaking the tyranny of the launch shroud, decreasing development times, decreasing mission costs for transformative science capability, and providing a scalable and versatile space infrastructure strategy. An ecosystem of reconfigurable infrastructure modules can be reused, repaired, expanded reconfigured to meet emergency or unforeseen needs, and reduce spare parts.

Christine Gregg↗

NASA NTRS2017

Measurement of the X-Ray Proper Motion in the South-East Rim of RXJ1713.7-3946

We report on the first proper motion measurement in the supernova remnant RX J1713.73946 using the XMM-Newton X-ray telescope on a 13 yr time interval. This expansion measurement is carried out in the south-east region of the remnant, where two sharp filament structures are observed. For the outermost filament, the proper motion is 0.75(+0.05-0.06) +/- 0.069 syst arcsec/ yr which is equivalent to a shock speed of approx. 3500 km/s at a distance of 1 kpc. In contrast with the bright north-west region, where the shock is interacting with the border of the cavity, the shock in the south-east region is probably expanding in the original ambient medium carved by the progenitor and can be used to derive the current density at the shock and the age of the remnant. In the case where the shock is evolving in a wind profile (p varies as r(sup -s), s = 2) or in a uniform medium (s = 0), we estimate an age of approx. 2300 yr and approx.1800 yr respectively for an ejecta power-law index of n = 9. The specific case of an ejecta power-law index of n = 7, and s = 0, yields an age of approx. 1500 yr, which would reconcile RX J1713.73946 with the historical records of SN 393. In all scenarios, we derive similar upstream densities of the order of 0.01/cu cm, compatible with the lack of thermal X-rays from the shocked ambient medium.

ISM↗

NASA NTRS2019

NASA’s Space Launch System Progress Report

NASA’s Space Launch System (SLS) continues to achieve assembly and testing milestones on its way to the launch of the first human-rated spacecraft to the Moon since the Apollo Program. Major flight hardware for Artemis I (see Fig. 1), formerly known as Exploration Mission 1 (EM-1), is complete, including the liquid and solid main propulsion systems. The Artemis I core stage is fully assembled and engine integration and checkout is underway. Structural testing on the core stage engine and payload sections and intertank are complete. Liquid hydrogen tank structural testing is under way, and liquid oxygen tank structural testing will begin in fall 2019. Major structural components for the second and third flights are also in production; hardware has been fabricated for each element of the Artemis II vehicle. SLS and the Orion crew vehicle along with the Exploration Ground Systems (EGS) launch facilities at Kennedy Space Center are critical to the nation’s plans to return to the Moon to stay in a measured, sustainable fashion. Lunar exploration will expand our understanding of Earth’s formation, serve as a proving ground for technologies for pushing deeper into the solar system, and inspire a new generation. This paper will discuss details of 2018-2019 progress and the work ahead to ready SLS for launch.

Honeycutt, John↗

NASA NTRSDate not supplied

TPSAS-NF1676L-18391-DND

Vehicle weight is a primary driver for most NASA missions. Reducing vehicle weight can: - Expand mission capability - Reduce launch costs - Reduce fuel consumption - Systems analysis shows that reducing materials mass by 20% leads to a 30% reduction in launch vehicle gross weight - Same study indicates a 50% reduction in materials mass reduces launch vehicle gross weight by >60%, enables potential single stage to orbit designs - Additional multifunctionality: thermal, radiation protection, sensing capabilities, no corrosion Potential Impact: Produce advanced lightweight structural BNNT composites with higher thermal stability, no corrosion, high toughness, sensing/actuation, and radiation shielding effectiveness.

Cheol Park↗

NASA NTRS1980

Laminates and reinforced metals

A selective review is presented of the state of the art of metallic laminates and fiber reinforced metals called metallic matrix laminates (MMLs). Design and analysis procedures that are used for, and typical structural components that have been made from MMLs are emphasized. Selected MMLs, constituent materials, typical material properties and fabrication procedures are briefly described, including hybrids and superhybrids. Advantages, disadvantages, and special considerations required during design, analysis, and fabrication of MMLs are examined. Tabular and graphical data are included to illustrate key aspects of MMLs. Appropriate references are cited to provide a selective bibliography of a rapidly expanding and very promising research and development field.

Chamis, C. C.↗

NASA NTRS1983

Contracts, grants and funding summary of supersonic cruise research and variable-cycle engine technology programs, 1972 - 1982

NASA-SCAR (AST) program was initiated in 1972 at the direct request of the Executive Office of the White House and Congress following termination of the U.S. SST program. The purpose of SCR was to conduct a focused research and technology program on those technology programs which contributed to the SST termination and, also, to provide an expanded data base for future civil and military supersonic transport aircraft. Funding for the Supersonic Cruise Research (SCR) Program was initiated in fiscal year 1973 and terminated in fiscal year 1981. The program was implemented through contracts and grants with industry, universities, and by in-house investigations at the NASA/OAST centers. The studies included system studies and five disciplines: propulsion, stratospheric emissions impact, materials and structures, aerodynamic performance, and stability and control. The NASA/Lewis Variable-Cycle Engine (VCE) Component Program was initiated in 1976 to augment the SCR program in the area of propulsion. After about 2 years, the title was changed to VCE Technology program. The total number of contractors and grantees on record at the AST office in 1982 was 101 for SCR and 4 for VCE. This paper presents a compilation of all the contracts and grants as well as the funding summaries for both programs.

Hoffman, S.↗

NASA NTRS1990

Design of internal support structures for an inflatable lunar habitat

NASA has a long range goal of constructing a fully equipped, manned lunar outpost on the near side of the moon by the year 2015. The proposed outpost includes an inflatable lunar habitat to support crews during missions longer that 12 months. A design for the internal support structures of the inflatable habitat is presented. The design solution includes material selection, substructure design, assembly plan development, and concept scale model construction. Alternate designs and design solutions for each component of the design are discussed. Alternate materials include aluminum, titanium, and reinforced polymers. Vertical support alternates include column systems, truss systems, suspension systems, and lunar lander supports. Horizontal alternates include beams, trusses, floor/truss systems, and expandable trusses. Feasibility studies on each alternate showed that truss systems and expandable trusses were the most feasible candidates for conceptual design. The team based the designs on the properties of 7075 T73 aluminum. The substructure assembly plan, minimizes assembly time and allows crews to construct the habitat without the use of EVA suits. In addition to the design solutions, the report gives conclusions and recommendations for further study of the inflatable habitat design.

Cameron, Elizabeth A.↗

NASA NTRS1992

Outbursts by low-mass white dwarfs in symbiotic variables

The high-resolution IUE spectra of the symbiotic variables BF Cygni and EG Andromedae are studied in order to describe the P Cygni-like features of these objects. The 10 high-dispersion IUE spectra are examined for orbital phase-dependent variations in the C IV resonance doublet in terms of velocity and/or structure. One image is found to have a strong He-II absorption feature that coincides in velocity with the C-IV absorption component in P Cygni. The absorbing material for both lines is related to outflow and P Cygni self-absorption near the hot component. The P Cygni profiles do not appear to be related to a red-giant wind nor an expanding circumbinary shell in the in both BF Cyg and EG And. Quasi-static evolutionary model calculations demonstrate an unexpected outburst behavior in response to the assumed accretion. These data are shown to be important for the study of symbiotic systems that contain low-mass white dwarfs.

Sion, Edward M.↗

NASA NTRS1994

Advanced teleoperation: Technology innovations and applications

The capability to remotely, robotically perform space assembly, inspection, servicing, and science functions would rapidly expand our presence in space, and the cost efficiency of being there. There is considerable interest in developing 'telerobotic' technologies, which also have comparably important terrestrial applications to health care, underwater salvage, nuclear waste remediation and other. Such tasks, both space and terrestrial, require both a robot and operator interface that is highly flexible and adaptive, i.e., capable of efficiently working in changing and often casually structured environments. One systems approach to this requirement is to augment traditional teleoperation with computer assists -- advanced teleoperation. We have spent a number of years pursuing this approach, and highlight some key technology developments and their potential commercial impact. This paper is an illustrative summary rather than self-contained presentation; for completeness, we include representative technical references to our work which will allow the reader to follow up items of particular interest.

Schenker, Paul S.↗

NASA NTRS2000

Reionization of the Universe and the Photoevaporation of Cosmological Minihalos

The first sources of ionizing radiation to condense out of the dark and neutral Intergalactic Medium (IGM) sent ionization fronts sweeping outward through their surroundings, overtaking other condensed objects and photoevaporating them. This feedback effect of universal reionization on cosmic structure formation is demonstrated here for the case of a cosmological minihalo of dark matter and baryons exposed to an external source of ionizing radiation with a quasar-like spectrum, just after the passage of the global ionization front created by the source. We model the pre-ionization minihalo as a truncated, nonsingular isothermal sphere in hydrostatic equilibrium following its collapse out of the expanding background universe and virialization. Results are presented of the first, gas dynamical simulations of this process, including radiative transfer. A sample of observational diagnostics is also presented, including the spatially-varying ionization levels of C, N, and O in the flow if a trace of heavy elements is present and the integrated column densities of H I, He I and He II, and C IV through the photoevaporating gas at different velocities, which would be measured in absorption against a background source like that responsible for the ionization.

Shapiro, Paul R.↗