Search NASA⌕ Search

SEARCH · Search NASA

Results for “Field Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Laser velocimeter measurements of the flow field generated by a forward-swept propfan during flutter

Results are presented from an investigation to measure the flow field generated by a forward-swept propfan operating in flutter at a low forward velocity. For comparison to the flutter condition, flow field data are also presented for a slightly reduced rotational speed just below flutter. The forward-swept propfan was tested as the front rotor of a counterrotating pusher propeller. A laser Doppler velocimeter (LDV) was used to measure the velocity field in planes normal to the model centerline downstream of the rotor and in planes of constant radius within the blade passages at each operating condition. The mean time-averaged flow about the blades did not change drastically as the propfan rotational speed was increased from the stable operating point to the flutter condition. No regions of flow separation could be identified in the data plots of the mean intrablade flow field. The relative flow about the blades remained subsonic during flutter operation. The blades were found to have a higher than expected tip loading at both operating conditions. This is thought to have been caused by the outer blade sections twisting under load to higher than expected effective blade angles. This high tip loading resulted in strong vortices and a very nonuniform flow downstream of the tips of the forward-swept blades. This high tip loading may also have caused the blade flutter.

Podboy, Gary G.↗

The role of plasma wave turbulence in the formation of shock waves in collisionless plasmas

A data set containing measurements for approximately 100 shock crossings was compiled, and plasma wave profiles were plotted in conjunction with magnetic field data. Three emissions analyzed include upstream electron plasma oscillations, ion acoustic noise, and low frequency electromagnetic noise. The data demonstrate that the observed waves are consistent with generation by the kinetic cross-field streaming instability. Reanalysis of shock overshoots prompted by the presence of plasma feet upstream of nominally subcritical shocks leads to the conclusion that no firm evidence exists for a sharp subcritical supercritical transition. Electron plasma oscillations persist up to the ramps of subcritical shocks and begin decaying at the front edge of the feet of supercritical shocks. Their intensity is anticorrelated with the amplitude of the foot ion acoustic noise. Wave measurements support the predicted predominance of lower hybrid-like modes over ion acoustic noise in the production of resistive (plasma) heating. Evidence for variable shock normal angles is seen upstream from nominally quasiparallel shocks. The first cases of very strong electron heating observed at the terrestrial bow shock were discovered.

Mellott, M. M.↗

Conforming Morse-Smale Complexes

Morse-Smale (MS) complexes have been gaining popularity as a tool for feature-driven data analysis and visualization. However, the quality of their geometric embedding and the sole dependence on the input scalar field data can limit their applicability when expressing application-dependent features. In this paper we introduce a new combinatorial technique to compute an MS complex that conforms to both an input scalar field and an additional, prior segmentation of the domain. The segmentation constrains the MS complex computation guaranteeing that boundaries in the segmentation are captured as separatrices of the MS complex. We demonstrate the utility and versatility of our approach with two applications. First, we use streamline integration to determine numerically computed basins/mountains and use the resulting segmentation as an input to our algorithm. This strategy enables the incorporation of prior flow path knowledge, effectively resulting in an MS complex that is as geometrically accurate as the employed numerical integration. Our second use case is motivated by the observation that often the data itself does not explicitly contain features known to be present by a domain expert. We introduce edit operations for MS complexes so that a user can directly modify their features while maintaining all the advantages of a robust topology-based representation.

97 MATHEMATICS AND COMPUTING↗

CHARACTERIZATION OF TRANSITIONS IN THE SOLAR WIND PARAMETERS

The distinction between fast and slow solar wind streams and the dynamically evolved interaction regions is reflected in the characteristic fluctuations of both the solar wind and the embedded magnetic field. High-resolution magnetic field data from the Ulysses spacecraft have been analyzed. The observations show rapid variations in the magnetic field components and in the magnetic field strength, suggesting a structured nature of the solar wind at small scales. The typical sizes of fluctuations cover a broad range. If translated to the solar surface, the scales span from the size of granules ({approx}10{sup 3} km) and supergranules ({approx}10{sup 4} km) on the Sun down to {approx}10{sup 2} km and less. The properties of the short time structures change in the different types of solar wind. While fluctuations in fast streams are more homogeneous, slow streams present a bursty behavior in the magnetic field variances, and the regions of transition are characterized by high levels of power in narrow structures around the transitions. The probability density functions of the magnetic field increments at several scales reveal a higher level of intermittency in the mixed streams, which is related to the presence of well localized features. It is concluded that, apart from the differences in the nature of fluctuations in flows of different coronal origin, there is a small-scale structuring that depends on the origin of streams themselves but it is also related to a bursty generation of the fluctuations.

79 ASTRONOMY AND ASTROPHYSICS↗

AMReX v2024

The software framework, AMReX, supports the development of block-structured adaptive mesh refinement (AMR) algorithms for solving systems of partial differential equations. AMR reduces the computational cost and memory footprint compared to a uniform mesh while preserving the essential local descriptions of different physical processes in complex multiphysics algorithms. AMR uses a hierarchical representation of the solution at multiple levels of resolution where the solution on each level is defined on the union of data containers at that resolution. These data containers, which represent the solution over a logically rectangular subregion of the domain, can contain field data defined on a mesh, Lagrangian particles or combinations of both. In addition to these basic data types, AMReX supports a multilevel embedded boundary representation of complex geometry; linear solvers for cell-centered and nodal data; asynchronous I/O in a native format readable by ParaView, VisIt and yt; and interfaces to hypre and PETSc solvers. AMReX enables applications to run on distributed memory architectures with multicore CPUs and with GPU accelerators. AMReX uses a lightweight abstraction layer that effectively hides the details of the architecture from the application. The framework currently supports CUDA, HIP and SYCL for GPU acceleration and OpenMP for multi-core CPU architectures.

Almgren, Ann↗

Protection of Distribution Circuits with High Penetration of Solar PV: Distance, Learning, and Estimation-Based Methods

The results of DOE Solar Energy Technologies Office project 34233 are presented. The newest version of IEEE Standard 1547 enables photovoltaic inverters to ride through voltage disturbances, improving bulk system reliability, at the expense of removing undervoltage trip as a fast method of de facto fault detection in high PV adoption scenarios. The project explored new methods of fault detection that don't rely on communication systems and could be available quickly, including distance-based schemes, focused directional relays, and two different data-driven schemes. The schemes were evaluated with fast-phasor simulation, electromagnetic transient simulation, and field data collection at partner utilities Chattanooga Electric Power Board and Dominion Energy Virginia. Accomplishments and possible paths forward are summarized.

14 SOLAR ENERGY↗

A Novel Approach to Map Permeability Using Passive Seismic Emission Tomography

Newly acquired magnetotelluric data and passive seismic data collected with tightly spaced geophone arrays are combined with historic drilling, active seismic, and potential fields data to generate 3-D permeability maps. A cooperative inversion methodology has been developed using active seismic, magnetotelluric, and gravity data in order to produce more robust velocity models for passive seismic data processing without requiring expensive 3-D active seismic surveys. The cooperative inversion estimates velocities from other geophysical data where no prior seismic velocity information is available at two geothermal sites in Nevada: San Emidio and Crescent Valley.

15 GEOTHERMAL ENERGY↗

Precision of ENDF and ENDL Formatted Data Files

The purpose is to ensure that today’s processing codes produced output to meet today’s accuracy needs. Since 1958 ENDL and about 1965 ENDF have each used a text format to define nuclear and atomic data in 11 columns for each data field. When these formats originated this was judged to be adequate to reproduce the accuracy of data at the time and to meet the needs of our applications. When these formats originated the dominant computer language of the day was FORTRAN and if written using an E11.4 format it would include only 4 or 5 digits of precision, e.g., 0.1234E-03 or 1.2345E-02, varying from one computer/system to another the result was not even unique. In the case of ENDF the 4 digit precision was not even adequate to uniquely define the atomic weight of the target, e.g., U238 = 92238 = 0.9224E+5 = WRONG! From its inceptions the ENDF format had a precision problem. One of my first tasks when in 1967 fresh out of graduate school I joined what later became the National Nuclear Data Center (NNDC), was to address this precision problem. By working with ENDF producers and users throughout the U.S. we verified, 1) E or D is not required to define FORTRAN readable numbers, e.g., E+4 or +4 are both o.k. 2) With ENDF energy eV and cross section in barns, 2 digit exponents are almost never required. 3) Since energy is never negative we could use the first of the 11 columns for a digit. Knowing this allowed us to produce ENDF/B-II to 6 or 7 digit precision, e.g., blank, decimal point, 2 or 3 digit exponent, e.g., ^1.23456-12 or ^1.234567-3. Below is an example of the actual ENDF/B-II data released. Note, the date 1970 and the atomic weight, ZA, uniquely defined to 6-digit accuracy, ^9.22350+ 4.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Magnetic dipole moment determination by near-field analysis

A method for determining the magnetic moment of a spacecraft from magnetic field data taken in a limited region of space close to the spacecraft. The spacecraft's magnetic field equations are derived from first principles. With measurements of this field restricted to certain points in space, the near-field equations for the spacecraft are derived. These equations are solved for the dipole moment by a least squares procedure. A method by which one can estimate the magnitude of the error in the calculations is also presented. This technique was thoroughly tested on a computer. The test program is described and evaluated, and partial results are presented.

Eichhorn, W. L.↗

Structure of current sheets in magnetic holes at 1 AU

Current density profiles in several types of interplanetary magnetic holes have been calculated using high-resolution Imp 6 magnetic field data (12.5 vector measurements/s), assuming that the currents flow in planar sheets and that the magnetic field varies only in the direction normal to the sheet. The planarity was verified in four holes which were observed by two suitably spaced spacecraft. Four types of simple magnetic holes are discussed, in which B varies nearly monotonically on each side of the hole. In two of the holes, B varies in intensity but not in direction as a result of currents normal to B. In the other two holes, B changes in both magnitude and direction as a result of currents both normal and parallel to B. The observed structures are found to be qualitatively consistent with the models of Burlaga and Lemaire (1978). Examples of complex irregular magnetic holes are also presented, and they are shown to contain multiple current sheets in which currents flow parallel to one another at various angles with respect to B. There is no model of such magnetic holes at present.

Fitzenreiter, R. J.↗

Cratering flow fields - Implications for the excavation and transient expansion stages of crater formation

Theoretical depths, volumes of excavation, hinge radii, ejection angles and transient structural rim uplifts are calculated, for comparison with experimental and field data from impact and explosion craters, by means of a Maxwell Z-model cratering flow field originating at non-zero depths-of-burst. It is found that the formation of a hinge, about which the coherent ejecta flap rotates at the rim of the transient crater, divides material in the flow field into ejected and downward and outward-driven portions. Ejected material originates from an excavation cavity whose geometry is distinct from that of the transient crater. The shallow depths of excavation both observed in impact and explosion craters and predicted by the Z-model flow fields imply that thickness estimates of such lunar geologic units as the maria basalts, which are determined by assuming that excavation depths are similar to (1) final or (2) transient crater depths, must be reduced by factors of two to three respectively. It is concluded that lunar basin excavation cavities exhibit proportional growth, and have maximum depths of excavation near 0.1 the diameter of the basin transient crater.

Croft, S. K.↗

Solar cycle evolution of the solar wind in three dimensions

Measurements of the solar wind speed both in and out of the ecliptic are presented for 1971-82. The speed estimates, which were made with the interplanetary scintillation system at UC San Diego, have been compared to in situ for large, slowly evolving structures, and thus such structures can be studied up to 60 degrees north and south heliographic latitude. Annual average wind speeds are presented versus latitude for an entire solar cycle. Fast wind streams from the poles persisted through declining and low solar activity, but were closed off during four years of high activity. This evolution follows that of the polar coronal holes, as displayed by comparing averaged speed and coronal density over latitude and longitude. The most recent data (1982) show the reestablishment of large tilted polar holes and associated fast streams. Coronal magnetic field data show that the neutral sheet is confined to low latitudes at solar minimum and extends to high latitudes at solar maximum; thus the slow solar wind comes from the same latitude range as that of the neutral sheet.

Rickett, B. J.↗

Documentation for the machine-readable version of a supplement to the Bright Star catalogue (Hoffleit, Saladyga and Wlasuk 1983)

Detailed descriptions of the three files of the machine-readable catalog are given. The files of the original tape have been restructured and the data records reformatted to produce a uniform data file having a single logical record per star and homogeneous data fields. The characteristics of the tape version as it is presently being distributed from the Astronomical Data Center are given and the changes to the original tape supplied are described.

Warren, W. H., Jr.↗

The magnetopause as a tangential discontinuity for large field rotation angles

Three passes of the ISEE 1 and 2 satellites through the dayside terrestrial magnetopause are discussed where the magnetopause is identified as a tangential discontinuity. This identification is based primarily on the failure of the plasma and magnetic field data to satisfy the conditions for a rotational discontinuity. In all these cases the interplanetary magnetic field was directed strongly southward and the angles between the fields on the two sides of the magnetopause ranged between 136 deg and 170 deg. As this is precisely the field geometry thought to be most conducive for reconnection, the magnetopause would be expected to be a rotational discontinuity. The simplest explanation of this result would appear to be that the magnetic field orientation is not the only factor controlling the onset of reconnection. However, as the identification of the discontinuity applies only locally, it cannot be excluded that for the magnetic field conditions investigated here, different portions of the magnetopause can be described as tangential and rotational discontinuities simultaneously.

Papamastorakis, I.↗

The rotation period of Uranus

On 24 January 1986 the spacecraft Voyager 2 transversed the innermost magnetosphere of the planet Uranus, coming as close as 4.2 Uranus radii to the planet. It is pointed out that the magnetic field data provide a direct measure of the rotation period of the planet's interior, where the field is generated. Two period determinations are reported. A combination of the obtained values provides a weighted mean value of P = 17.24 + or - 0.01 h. It is concluded that the 17.24-h rotation period has important consequences for studies of atmospheric dynamics and the internal structure and composition of Uranus. Thus, inferences regarding the internal structure can be drawn from the relationship between the observed planetary oblateness, rotation period, and gravitational moment.

Desch, M. D.↗

A case study of the cusp electrodynamics by the Aureol-3 satellite - Evidence for FTE signatures?

Particle and field data from a pass of the Aureol-3 satellite through the polar cusp, several minutes after the southward turning of the IMF, are analyzed in detail. Superposed on the classical cusp, characterized by the typical ion and electron precipitations, several very narrow arcs are detected where large fluxes of electrons and ions, accelerated to 2-4 keV, precipitate simultaneously. These localized arcs correspond to the upward current sheets of a succession in latitude of narrow, alternatively upward and downward field-aligned current sheets. The data suggest that the satellite has crossed the ionospheric footprints of 2 adjacent flux transfer events separated by 100-150 km in latitude. Electric spikes and electromagnetic turbulence are typically associated with the region of downward currents.

Bosqued, Jean M.↗

Delta/Wind Launch with Isolated Cameras from Continuous Recording

The Wind spacecraft represents one of NASA's contributions to the International Solar Terrestrial Program (ISTP), an international effort to quantify the effects of solar energy on the Earth's magnetic field. Wind will provide continuous measurement of the solar wind, particularly charged particles and magnetic field data. The specific objectives of Wind are to: (1) provide complete plasma, energetic particle, and magnetic field input for magnetospheric and ionospheric studies; (2) determine the magnetospheric output to interplanetary space in the upstream region; (3) investigate basic plasma processes occurring in the near-Earth solar wind; and (4) provide baseline ecliptic plane observations to be used in heliospheric studies. This videotape shows the pre-dawn launch of the Wind spacecraft aboard a Delta 7925 on November 1, 1994. After the countdown and launch, the tape shows the activity in the Telemetry Room at Kennedy Space Center, where people are following the progress of the spacecraft. Following the activity in the telemetry room, there are four different replays of the launch from different locations. After showing the replays of the launch, the video returns to the Telemetry Room when an important stage in the launch and flight is achieved.

Source record↗

Global inventory and meta-analysis of offshore geologic carbon storage efforts

Poster for presentation at the American Geophysical Union Fall Meeting 2023 detailing work conducted for the Carbon Storage Data Field Work Proposal. This poster presents an inventory and meta-analysis conducted for Carbon Storage Data Task 4, which includes a review of offshore geologic carbon storage projects worldwide including site characterization, resource estimates, and transport information.

Mark-Moser, Mackenzie K.↗