Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geodetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Civil and scientific applications of the geoid

SEASAT-A can be used for determining the geoid to much higher accuracy on a world wide basis and in a relatively short time. Two basic objectives can be considered: (1) determination of the geoid to at least 1 meter. This accuracy will satisfy most geodetic requirements for applications purposes; and (2) determination of the geoid to better than 1-meter an oceanographic objective required for measurement of sea surface topography and sea slope, quasi-stationary departure from the geoid, ocean circulation, air and sea interaction, etc. The geodesy objective in this case will be to define a reference equipotential surface as a means by which the oceanographic requirements can be achieved.

Mourad, A. G.↗

The Earth and Ocean Physics Applications Program (EOPAP). Ocean dynamics program

SEASAT-A is a research oriented program consisting of a spacecraft, precision ground tracking systems, and data processing and modelling capabilities that address both scientific and application programs problems in ocean surface dynamics for the EOPAP program. An array of active radar and passive microwave and infrared instruments allows for quantitative measurements of oceanic, atmospheric, and geodetic parameters under stormy wind and wave conditions, as well as over regions lying under a cloud cover.

Apel, J. R.↗

Error analysis for the proposed close grid geodynamic satellite measurement system (CLOGEOS)

The close grid geodynamic measurement system experiment which envisages an active ranging satellite and a grid of retro-reflectors or transponders in the San Andreas fault area is a detailed simulated study for recovering the relative positions in the grid. The close grid geodynamic measurement system for determining the relative motion of two plates in the California region (if feasible) could be used in other areas of the world to delineate and complete the picture of crustal motions over the entire globe and serve as a geodetic survey system. In addition, with less stringent accuracy standards, the system would also find usage in allied geological and marine geodesy fields.

Mueller, I. I.↗

Marking LANDSAT images with small mirror reflectors

Uniquely identifiable artificial landmarks were generated in LANDSAT imagery by making use of specular solar reflection from small, easily transportable mirrors. The results are impressive in well-registered color composite enlargements, where the mirror returns appear as bright white spots. The signatures are unique enough that returns can be readily located in the computer compatible tape records either manually or by machine search. As embodied in experiments to date, the system is entirely passive. Mirrors must be carefully positioned prior to each satellite pass, but the required angle calculations are simple enough to be made on a hand calculator and the required input data are easily available. Possible applications of the technique include providing site identification and geodetic control in remote regions of the earth, enhancement of small targets such as offshore oil derricks, providing atmospheric transmission data coincident with other LANDSAT experiments, and providing a nearly perfect optical point source for overall system checkout.

Evans, W. E.↗

Site evaluation for laser satellite-tracking stations

Twenty-six locations for potential laser satellite-tracking stations, four of them actually already occupied in this role, are reviewed in terms of their known local and regional geology and geophysics. The sites are also considered briefly in terms of weather and operational factors. Fifteen of the sites qualify as suitable for a stable station whose motions are likely to reflect only gross plate motion. The others, including two of the present laser station sites (Arequipa and Athens), fail to qualify unless extra monitoring schemes can be included, such as precise geodetic surveying of ground deformation.

Mao, N. H.↗

User requirements for project-oriented remote sensing

Registration of remotely sensed data to geodetic coordinates provides for overlay analysis of land use data. For aerial photographs of a large area, differences in scales, dates, and film types are reconciled, and multispectral scanner data are machine registered at the time of acquisition.

Hitchcock, H. C.↗

Viking telecommunication effects of GEOS satellite interference based on testing at the Madrid deep space station

In support of the ongoing NASA-European Space Agency (ESA) effort to understand and control possible interference between missions, testing was conducted at the Madrid Deep Space Station from July 1975 to February 1976 to characterize the effect on Viking 1975 telecommunication link performance of Geodetic Earth-Orbiting Satellite (GEOS) downlink signals. The prime use of the data was to develop a capability to predict GEOS interference effects for evaluation of Viking 1975 mission impacts and possible temporary GEOS shutdown. Also, the data would serve as a basis for assessment of the GEOS impact on missions other than Viking as well as for more general interference applications. Performances of the reference receiver, telemetry, and planetary ranging were measured in the presence of various types of GEOS-related interference, including an unmodulated GEOS carrier and simulation of the actual spectrum by an ESA-supplied GEOS suitcase model.

Stuhr, F. V.↗

Recursive partitioned inversion of large (1500 x 1500) symmetric matrices

A recursive algorithm was designed to invert large, dense, symmetric, positive definite matrices using small amounts of computer core, i.e., a small fraction of the core needed to store the complete matrix. The described algorithm is a generalized Gaussian elimination technique. Other algorithms are also discussed for the Cholesky decomposition and step inversion techniques. The purpose of the inversion algorithm is to solve large linear systems of normal equations generated by working geodetic problems. The algorithm was incorporated into a computer program called SOLVE. In the past the SOLVE program has been used in obtaining solutions published as the Goddard earth models.

Putney, B. H.↗

Sensitivity analysis of short-arc station coordinate determinations from range data

The accurate determination of the geocentric coordinates of a tracking station is essential for most geodetic and geophysical satellite applications. Since most of these satellites are close to the earth, the geopotential model is a dominant source of error which significantly influences station coordinate determinations. Other sources, such as GM error and drag, also influence the accuracy of the station coordinate determination. One technique for reducing the effect of these errors is to use short-arcs consisting of a few passes of the satellite over the tracking station. This paper analyzes the sensitivity of short-arc station coordinate estimates to various errors in the physical model, to the number of observations, and to the station-satellite geometry using simulated as well as real data.

Schutz, B. E.↗

A demonstration of a transportable radio interferometric surveying system with 3-cm accuracy on a 307-m base line

A precision geodetic measurement system (Aries, for Astronomical Radio Interferometric Earth Surveying) based on the technique of very long base line interferometry has been designed and implemented through the use of a 9-m transportable antenna and the NASA 64-m antenna of the Deep Space Communications Complex at Goldstone, California. A series of experiments designed to demonstrate the inherent accuracy of a transportable interferometer was performed on a 307-m base line during the period from December 1973 to June 1974. This short base line was chosen in order to obtain a comparison with a conventional survey with a few-centimeter accuracy and to minimize Aries errors due to transmission media effects, source locations, and earth orientation parameters. The base-line vector derived from a weighted average of the measurements, representing approximately 24 h of data, possessed a formal uncertainty of about 3 cm in all components. This average interferometry base-line vector was in good agreement with the conventional survey vector within the statistical range allowed by the combined uncertainties (3-4 cm) of the two techniques.

Ong, K. M.↗

Improved gravity field and station-coordinate estimates from laser tracking data

Knowledge of the long-wavelength features of the geopotential and the geocentric coordinates of satellite-tracking stations is significantly improved by the use of precision satellite tracking with lasers. Tracking data on nine satellites are combined with terrestrial gravimetry to obtain a spherical-harmonics representation of the geopotential complete through degree and order 24. Laser tracking data are used to determine the coordinates of tracking stations. This coordinate system is referred to an inertial reference frame by use of camera observations and observations of deep-space probes. Resulting geodetic parameters provide better satellite ephemerides and a reference for analyzing satellite-to-sea-surface altimetry.

Gaposchkin, E. M.↗

Probabilistic and deterministic aspects of linear estimation in geodesy

Recent advances in observational techniques related to geodetic work (VLBI, laser ranging) make it imperative that more consideration should be given to modeling problems. Uncertainties in the effect of atmospheric refraction, polar motion and precession-nutation parameters, cannot be dispensed with in the context of centimeter level geodesy. Even physical processes that have generally been previously altogether neglected (station motions) must now be taken into consideration. The problem of modeling functions of time or space, or at least their values at observation points (epochs) is explored. When the nature of the function to be modeled is unknown. The need to include a limited number of terms and to a priori decide upon a specific form may result in a representation which fails to sufficiently approximate the unknown function. An alternative approach of increasing application is the modeling of unknown functions as stochastic processes.

Dermanis, A.↗

The 1974 Ethiopian rift geodimeter survey

The field techniques and methods of data reduction for five successive geodimeter surveys in the Ethiopian rift valley are enlarged upon, with the considered conclusion that there is progressive accumulation of upper crustal strain, consonant with on-going rift extension. The extension is restricted to the Quaternary volcanotectonic axis of the rift, namely the Wonji fault belt, and is occurring at rates of 3 to 6 mm/yr in the northern sector of the rift valley. Although this concurs with the predictions of platetectonic analysis of the Afar triple junction, it is considered premature to endorse such a concurrence on the basis of only 5 years of observations. This is underlined by the detection of local tectonic contractions and expansions associated with geothermal and gravity anomalies in the central sector of the rift valley. There is a hint of a component of dextral slip along some of the rift-floor fault zones, both from geological evidence and from the strain patterns detected in the present geodetic surveys.

Mohr, P.↗

The gravity field of Jupiter

Preliminary analysis of two-way Doppler data from Pioneers 10 and 11 has provided the first detailed model of the Jovian gravity field. A review of the determination of the zonal harmonic coefficients through the sixth degree is presented, and the results are used to derive a number of geodetic parameters in the atmospheric region of the planet. On a level surface at a pressure of one bar, the net acceleration due to gravity is found to vary from a maximum of 2707 cm/sec squared at the poles to a minimum of 2322 cm/sec squared at the equator. The large dynamical flattening at the one-bar level produces a significant deviation of the local vertical from the Jovicentric radius vector. The angular difference is as much as 3.83 degrees of arc in the high temperature zones of the planet. These considerations are important for the accurate modeling of the atmosphere of Jupiter and for the interpretation of occultation data.

Anderson, J. D.↗

Sensitivity analysis of short-arc station coordinate determinations from range data

The accurate determination of the geocentric coordinates of a tracking station is essential for most geodetic and geophysical satellite applications. Since most of these satellites are close to the earth, the geopotential model is a dominant source of error which significantly influences station coordinate determinations. Other sources, such as GM error and drag, also influence the accuracy of the station coordinate determination. One technique for reducing the effect of these errors is to use short-arcs consisting of a few passes of the satellite over the tracking station. This paper analyzes the sensitivity of short-arc station coordinate estimates to various errors in the physical model, to the number of observations, and to the station-satellite geometry using simulated as well as real data.

Schutz, B. E.↗

On the interpretation of least squares collocation

A demonstration is given of the strict mathematical equivalence between the least squares collocation and the classical minimum variance estimates. It is shown that the least squares collocation algorithms are a special case of the modified minimum variance estimates. The computational efficiency of several forms of the general minimum variance estimation algorithm is discussed. It is pointed out that for certain geodetic applications the least square collocation algorithm may provide a more efficient formulation of the results from the point of view of the computations required.

Tapley, B. D.↗

A possible experiment with two counter-orbiting drag-free satellites to obtain a new test of Einstein's general theory of relativity and improved measurements in geodesy

In 1918, Lense and Thirring calculated that a moon in orbit around a massive rotating planet would experience a nodal dragging effect due to general relativity. We describe an experiment to measure this effect by means of two counter-orbiting drag-free satellites in polar orbit about the earth. For a 2-1/2 year experiment, the measurement should approach an accuracy of 1%. An independent measurement of the geodetic precession of the orbit plane due to the motion about the sun may also be possible to about 10% accuracy. In addition to precision tracking data from existing ground stations, satellite-to-satellite Doppler data are taken at points of passing near the poles to yield an accurate measurement of the separation distance between the two satellites. New geophysical information on both earth harmonics and tidal effects is inherent in this polar ranging data.

Van Patten, R. A.↗

GEOS 3 altimeter performance

GEOS 3 (Geodynamics Experimental Ocean Satellite) is the first satellite launched in the NASA Earth and Ocean Physics Applications Program and is designed to perform both geodetic and oceanographic missions. Aboard GEOS 3 is a radar altimeter for measuring the ocean surface characteristics and the spacecraft to ocean surface distance. Frequency of operation is 13.9 GHz, with two modes of operation - global or long pulse (200 nsec) mode, and intensive or short pulse (12 nsec) pulse mode. The discussion covers spacecraft and instrumentation, mission objectives, spacecraft performance, and altimeter data characteristics. Although the altimeter operation is planned only over water, the checkout of the altimeter system demonstrated that the global mode is capable of operating over land for which the terrain is not too mountainous. Sample altimeter sea surface and waveform measurements are presented.

Martin, C. F.↗