Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hall effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Nanoscale pressure sensors realized from suspended graphene membrane devices

We study the transport properties of graphene layers placed over ∼200 nm triangular holes via attached electrodes under applied pressure. We find that the injected current division between counter electrodes depends on pressure and can be used to realize a nanoscale pressure sensor. Estimating various potential contributions to the resistivity change of the deflected graphene membrane including piezoresistivity, changing gate capacitance, and the valley Hall effect due to the pressure-induced synthetic magnetic field, we find that the valley Hall effect yields the largest expected contribution to the longitudinal resistivity modulation for accessible device parameters. Such devices in the ballistic transport regime may enable the realization of tunable valley polarized electron sources.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable magnetic and transport properties of single crystalline (Co, Ga)-codoped ZnO films

A series of metallic (Co, Ga)-codoped ZnO single crystalline films have been grown by molecular beam epitaxy. All of the films exhibit metallic conducting behavior and high free carrier concentrations. Besides room temperature ferromagnetism, the anomalous Hall effect due to spin-orbit interaction was also found. Both the saturation magnetization and anomalous Hall effect can be tuned by the carrier concentration or conductivity, revealing that the ferromagnetism is carrier mediated in (Co, Ga)-codoped ZnO films. Our experimental observations are consistent with the recent theoretical description of carrier mediated magnetism in Co doped ZnO.

36 MATERIALS SCIENCE↗

Structural, Electrical, and Optical Properties of Single-Walled Carbon Nanotubes Synthesized through Floating Catalyst Chemical Vapor Deposition

Single-walled carbon nanotube (SWCNT) thin films were synthesized by using a floating catalyst chemical vapor deposition (FCCVD) method with a low flow rate (200 sccm) of mixed gases (Ar and H 2 ). SWCNT thin films with different thicknesses can be prepared by controlling the collection time of the SWCNTs on membrane filters. Transmission electron microscopy (TEM) showed that the SWCNTs formed bundles and that they had an average diameter of 1.46 nm. The Raman spectra of the SWCNT films suggested that the synthesized SWCNTs were very well crystallized. Although the electrical properties of SWCNTs have been widely studied so far, the Hall effect of SWCNTs has not been fully studied to explore the electrical characteristics of SWCNT thin films. In this research, Hall effect measurements have been performed to investigate the important electrical characteristics of SWCNTs, such as their carrier mobility, carrier density, Hall coefficient, conductivity, and sheet resistance. The samples with transmittance between 95 and 43% showed a high carrier density of 10 21– 10 23 cm –3 . The SWCNTs were also treated using Brønsted acids (HCl, HNO 3 , H 2 SO 4 ) to enhance their electrical properties. After the acid treatments, the samples maintained their p-type nature. The carrier mobility and conductivity increased, and the sheet resistance decreased for all treated samples. The highest mobility of 1.5 cm 2 /Vs was obtained with the sulfuric acid treatment at 80 °C, while the highest conductivity (30,720 S/m) and lowest sheet resistance (43 ohm/square) were achieved with the nitric acid treatment at room temperature. Different functional groups were identified in our synthesized SWCNTs before and after the acid treatments using Fourier-Transform Infrared Spectroscopy (FTIR).

36 MATERIALS SCIENCE↗

Hf thickness dependence of spin-orbit torques in Hf/CoFeB/MgO heterostructures

We have studied the spin-orbit torques in perpendicularly magnetized Hf/CoFeB/MgO system, by systematically varying the thickness of Hf underlayer. We have observed a sign change of effective fields between Hf thicknesses of 1.75 and 2 nm, indicating that competing mechanisms, such as the Rashba and spin Hall effects, contribute to spin-orbit torques in our system. For larger Hf thicknesses (>2 nm), both the components of spin-orbit torques arise predominantly from the bulk spin Hall effect. We have also confirmed these results using spin-orbit torque induced magnetization switching measurements. Our results could be helpful in designing Hf based SOT devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spin Hall controlled magnonic microwaveguides

We use space-resolved magneto-optical spectroscopy to study the influence of spin Hall effect on the excitation and propagation of spin waves in microscopic magnonic waveguides. We find that the spin Hall effect not only increases the spin-wave propagation length, but also results in an increased excitation efficiency due to the increase of the dynamic susceptibility in the vicinity of the inductive antenna. We show that the efficiency of the propagation length enhancement is strongly dependant on the type of the excited spin-wave mode and its wavelength.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Galvanomagnetic properties of Heusler alloys Co{sub 2}FeZ (Z = Al, Si, Ga, Ge, In, Sn, Sb)

The magnetization, Hall effect, and resistivity of Heusler alloys Co{sub 2}FeZ (where Z = Al, Si, Ga, Ge, In, Sn, and Sb are s- and p-elements) have been studied at T = 4.2 K in magnetic fields H ≤ 100 kOe. In strong fields (H > 20 kOe), magnetization can be described by the Stoner model. The normal R{sub 0} and anomalous R{sub S} Hall effect coefficients have been determined. The coefficient RS is positive for almost all the studied alloys and represents a “linearly quadratic” resistivity function incorporating linear and quadratic terms. The constant R{sub 0} is negative for most alloys, and its absolute value is two or three orders of magnitude smaller than for R{sub S}. The magnetoresistivity of the studied alloys does not exceed several percent and may be both positive and negative for different specimens.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of heavy metal layer thickness on spin-orbit torque and current-induced switching in Hf|CoFeB|MgO structures

We study the heavy metal layer thickness dependence of the current-induced spin-orbit torque (SOT) in perpendicularly magnetized Hf|CoFeB|MgO multilayer structures. The damping-like (DL) current-induced SOT is determined by vector anomalous Hall effect measurements. A non-monotonic behavior in the DL-SOT is found as a function of the thickness of the heavy-metal layer. The sign of the DL-SOT changes with increasing the thickness of the Hf layer in the trilayer structure. As a result, in the current-driven magnetization switching, the preferred direction of switching for a given current direction changes when the Hf thickness is increased above ∼7 nm. Although there might be a couple of reasons for this unexpected behavior in DL-SOT, such as the roughness in the interfaces and/or impurity based electric potential in the heavy metal, one can deduce a roughness dependence sign reversal in DL-SOT in our trilayer structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Solar Array Plume Interactions on Hall Thruster Cathode Common Potentials

In typical implementations of spacecraft electric propulsion (EP) systems the electrical ground of the EP power processing units are resistively isolated from the main spacecraft electrical ground. Telemetry measuring the potential difference between EP power processing unit and the spacecraft electrical ground is usually referred to as the “cathode common” potential. In this paper we review flight and laboratory data on natural and EP generated plasma interactions with solar arrays, present the theory of spacecraft floating potentials, show how this theory is consistent with flight data, and extend this theory to spacecraft with high power Hall effect thrusters.

Katz, Ira↗

Magnetoelectric control of topological phases in graphene

Topological antiferromagnetic (AFM) spintronics is an emerging field of research, which involves the topological electronic states coupled to the AFM order parameter known as the Néel vector. The control of these states is envisioned through manipulation of the Néel vector by spin-orbit torques driven by electric currents. In this work, we present a different approach favorable for low-power AFM spintronics, where the control of the topological states in a two-dimensional material, such as graphene, is performed via the proximity effect by the voltage induced switching of the Néel vector in an adjacent magnetoelectric AFM insulator, such as chromia. Mediated by the symmetry protected boundary magnetization and the induced Rashba-type spin-orbit coupling at the interface between graphene and chromia, the emergent topological phases in graphene can be controlled by the Néel vector. Using density functional theory and tight-binding Hamiltonian approaches, we model a graphene / Cr 2 O 3 (0001) interface and demonstrate nontrivial band gap openings in the graphene Dirac bands asymmetric between the K and K ' valleys. This gives rise to an unconventional quantum anomalous Hall effect (QAHE) with a quantized value of 2 e 2 / h and an additional steplike feature at a value close to e 2 / 2 h , and the emergence of the spin-polarized valley Hall effect (VHE). Additionally, depending on the Néel vector orientation, we predict the appearance and transformation of different topological phases in graphene across the 180° AFM domain wall, involving the QAHE, the valley-polarized QAHE, and the quantum VHE, and the emergence of the chiral edge states along the domain wall. These topological properties are controlled by voltage through magnetoelectric switching of the AFM insulator with no need for spin-orbit torques.

36 MATERIALS SCIENCE↗

Inter-Landau-level Andreev Reflection at the Dirac Point in a Graphene Quantum Hall State Coupled to a NbSe 2 Superconductor

Superconductivity and quantum Hall effect are distinct states of matter occurring in apparently incompatible physical conditions. Recent theoretical developments suggest that the coupling of quantum Hall effect with a superconductor can provide a fertile ground for realizing exotic topologi- cal excitations such as non-abelian Majorana fermions or Fibonacci particles. As a step toward that goal, we report observation of Andreev reflection at the junction of a quantum Hall edge state in a single layer graphene and a quasi-two dimensional niobium diselenide (NbSe 2 ) superconductor. Our principal finding is the observation of an anomalous finite-temperature conductance peak located precisely at the Dirac point, providing a definitive evidence for inter-Landau level Andreev reflection in a quantum Hall system. Our observations are well supported by detailed numerical simulations, which offer additional insight into the role of the edge states in Andreev physics. As a result, this study paves the way for investigating analogous Andreev reflection in a fractional quantum Hall system coupled to a superconductor to realize exotic quasiparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Topological phases for fermionic cold atoms on the Lieb lattice

We investigate the properties of the Lieb lattice, that is, a face-centered square lattice, subjected to external gauge fields. We show that an Abelian gauge field leads to a peculiar quantum Hall effect, which is a consequence of the single Dirac cone and the flat band characterizing the energy spectrum. Then we explore the effects of an intrinsic spin-orbit term--a non-Abelian gauge field--and demonstrate the occurrence of the quantum spin Hall effect in this model. Besides, we obtain the relativistic Hamiltonian describing the Lieb lattice at low energy and derive the Landau levels in the presence of external Abelian and non-Abelian gauge fields. Finally, we describe concrete schemes for realizing these gauge fields with cold fermionic atoms trapped in an optical Lieb lattice. In particular, we provide a very efficient method to reproduce the intrinsic (Kane-Mele) spin-orbit term with assisted-tunneling schemes. Consequently, our model could be implemented in order to produce a variety of topological states with cold atoms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Hall mobility in tin iodide perovskite CH{sub 3}NH{sub 3}SnI{sub 3}: Evidence for a doped semiconductor

CH{sub 3}NH{sub 3}SnI{sub 3} is a metal halide perovskite that shows metallic conductivity over a wide temperature range, although ab initio calculations and optical absorption indicate that its band structure is consistent with that of an intrinsic semiconductor. Hall effect measurements of as-grown crystals give a hole concentration of about 9×10{sup 17} cm{sup −3} with rather high Hall mobility of about 200 cm{sup 2} V{sup −1} s{sup −1} at 250 K. Artificial hole doping enhances the electrical conductivity of the crystals without influencing mobility. These observations indicate that the electronic structure in stoichiometric CH{sub 3}NH{sub 3}SnI{sub 3} can be described as that of an intrinsic semiconductor with a wide valence band. This situation leads to metal-like conduction with even a trace amount of spontaneous hole doping in the as-grown crystal. - Graphical abstract: Hall effect measurements of as-grown CH{sub 3}NH{sub 3}SnI{sub 3} crystals give a hole concentration of about 9×10{sup 17} cm{sup −3}. Artificial hole doping enhances the electrical conductivity of the crystals without influencing mobility, indicating that the electronic structure of CH{sub 3}NH{sub 3}SnI{sub 3} can be described as that of an intrinsic semiconductor with a wide valence band. Display Omitted - Highlights: • Hole concentration in highly conducting CH{sub 3}NH{sub 3}SnI{sub 3} was determined. • Hall mobility was not affected by artificial hole doping. • The electronic structure can be described as that of an intrinsic semiconductor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Study of the near-electrode processes in quasi-steady plasma accelerators with impenetrable electrodes

Near-electrode processes in a coaxial plasma accelerator with equipotential impenetrable electrodes are simulated using a two-dimensional (generally, time-dependent) two-fluid MHD model with allowance for the Hall effect and the plasma conductivity tensor. The simulations confirm the theoretically predicted mechanism of the so-called 'crisis of current' caused by the Hall effect. The simulation results are compared with available experimental data. The influence of both the method of plasma supply to the channel and an additional longitudinal magnetic field on the development of near-electrode instabilities preceding the crisis of current is studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multi-region relaxed Hall magnetohydrodynamics with flow

The recent formulations of multi-region relaxed magnetohydrodynamics (MRxMHD) have generalized the famous Woltjer-Taylor states by incorporating a collection of “ideal barriers” that prevent global relaxation and flow. In this paper, we generalize MRxMHD with flow to include Hall effects, and thereby obtain the partially relaxed counterparts of the famous double Beltrami states as a special subset. The physical and mathematical consequences arising from the introduction of the Hall term are also presented. We demonstrate that our results (in the ideal MHD limit) constitute an important subset of ideal MHD equilibria, and we compare our approach against other variational principles proposed for deriving the partially relaxed states.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

CsSnI[subscript 3]: Semiconductor or Metal? High Electrical Conductivity and Strong Near-Infrared Photoluminescence from a Single Material. High Hole Mobility and Phase-Transitions

CsSnI{sub 3} is an unusual perovskite that undergoes complex displacive and reconstructive phase transitions and exhibits near-infrared emission at room temperature. Experimental and theoretical studies of CsSnI{sub 3} have been limited by the lack of detailed crystal structure characterization and chemical instability. Here we describe the synthesis of pure polymorphic crystals, the preparation of large crack-/bubble-free ingots, the refined single-crystal structures, and temperature-dependent charge transport and optical properties of CsSnI{sub 3}, coupled with ab initio first-principles density functional theory (DFT) calculations. In situ temperature-dependent single-crystal and synchrotron powder X-ray diffraction studies reveal the origin of polymorphous phase transitions of CsSnI{sub 3}. The black orthorhombic form of CsSnI{sub 3} demonstrates one of the largest volumetric thermal expansion coefficients for inorganic solids. Electrical conductivity, Hall effect, and thermopower measurements on it show p-type metallic behavior with low carrier density, despite the optical band gap of 1.3 eV. Hall effect measurements of the black orthorhombic perovskite phase of CsSnI{sub 3} indicate that it is a p-type direct band gap semiconductor with carrier concentration at room temperature of {approx} 10{sup 17} cm{sup -3} and a hole mobility of {approx} 585 cm{sup 2} V{sup -1} s{sup -1}. The hole mobility is one of the highest observed among p-type semiconductors with comparable band gaps. Its powders exhibit a strong room-temperature near-IR emission spectrum at 950 nm. Remarkably, the values of the electrical conductivity and photoluminescence intensity increase with heat treatment. The DFT calculations show that the screened-exchange local density approximation-derived band gap agrees well with the experimentally measured band gap. Calculations of the formation energy of defects strongly suggest that the electrical and light emission properties possibly result from Sn defects in the crystal structure, which arise intrinsically. Thus, although stoichiometric CsSnI{sub 3} is a semiconductor, the material is prone to intrinsic defects associated with Sn vacancies. This creates highly mobile holes which cause the materials to appear metallic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical transport properties of Si-doped hexagonal boron nitride epilayers

The suitability of Si as an n-type dopant in hexagonal boron nitride (hBN) wide bandgap semiconductor has been investigated. Si doped hBN epilayers were grown via in-situ Si doping by metal organic chemical vapor deposition technique. Hall effect measurements revealed that Si doped hBN epilayers exhibit n-type conduction at high temperatures (T > 800 K) with an in-plane resistivity of ∼12 Ω·cm, electron mobility of μ ∼ 48 cm{sup 2}/V·s and concentration of n ∼ 1 × 10{sup 16} cm{sup −3}. Temperature dependent resistivity results yielded a Si energy level in hBN of about 1.2 eV, which is consistent with a previously calculated value for Si substitutionally incorporated into the B sites in hBN. The results therefore indicate that Si is not a suitable dopant for hBN for room temperature device applications.

36 MATERIALS SCIENCE↗

Control of surface plasmon excitation via the scattering of light by a nanoparticle

We study an excitation of surface plasmons (SPs) due to the scattering of light by a dipole nanoparticle located near a flat air–metal interface. It is well known that such a scattering can reveal asymmetric behavior of excited SPs with respect to the plane of incidence of light. This asymmetric SP excitation, which takes place at the incidence of elliptically polarized light, is often associated with the so-called photonic spin Hall effect caused by the interplay between rotating polarization of a nanoparticle and the intrinsic field angular momentum of the SP. We show that this photonic spin Hall effect can be applied for the SP excitation control, which allows managing the SP directivity pattern and amplitude. The possibilities of SP control can also be extended using nanoparticles with anisotropic polarizability. We believe that manipulations with SPs at a nanometer scale may find some applications in modern nanoplasmonics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Epitaxial growth, electrical and optical properties of a-plane InN on r-plane sapphire

The heteroepitaxy of a-plane (1120) InN films on r-plane (1102) sapphire substrates, by nitrogen radio frequency plasma-assisted molecular beam epitaxy, has been investigated and compared to that of c-plane (0001) InN. The epitaxial growth of a-plane InN proceeded through the nucleation, growth, and coalescence of three-dimensional islands, resulting in surface roughness that increased monotonically with epilayer thickness. The full width at half maximum of (1120) x-ray diffraction rocking curves decreased significantly with increasing InN thickness, characteristic of structural improvement, and it reached the value of 24 arcmin for a 1 {mu}m thick film. Hall-effect measurements exhibited a similar dependence of electron concentration and mobility on thickness for both the a- and c-plane InN films. The analysis of the Hall-effect measurements, by considering the contribution of two conducting layers, indicates a similar accumulation of low mobility electrons with N{sub s}>10{sup 14} cm{sup -2} at the films' surface/interfacial region for both the a- and c-plane InN films. From optical transmittance measurements, the absorption edge of 0.768 eV was determined for the 1 {mu}m a-plane film, consistent with the expected Burstein-Moss effect. Photoluminescence spectra exhibited a lower energy peak at 0.631 eV, suggesting defect-related transitions.

36 MATERIALS SCIENCE↗