Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Performance of Nd-Fe-B Magnets Fabricated by Hot Isostatic Pressing and Low-Temperature Sintering

Magnetic properties and microstructure of Nd-Fe-B sintered magnets fabricated by hot isostatic pressing (HIP) were studied. For comparison, magnets were also fabricated by vacuum sintering. The density reached 7.58 g/cm{sup 3} for the magnets HIP-sintered at 1123 K. The density of the magnets vacuum-sintered at 1123 K was much lower, which is of about 6.92 g/cm{sup 3}. While the density of magnets vacuum-sintered at 1318 K was the same as the HIP-sintered magnets, the sintering temperature was significantly decreased to 1123 K. In addition, the average grain size decreased from 9 to 6 μm, which has enhanced coercivity. Therefore, the coercivity increased from 1067.7 to 1238.5 kA/m, which is 16% higher than the vacuum-sintered magnets. HIP is a promising method to obtain high density and high coercivity Nd-Fe-B sintered magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cubic to hexagonal tuning in Fe 2 Mn(Si 1– x Ge x ) Heusler alloys

Here, the competition between the stability of the cubic and hexagonal full Heusler alloys and the implications concerning their magnetic properties were systematically studied through the detailed structural and magnetic characterization of the Fe 2 Mn(Si 1– x Ge x ) system. This system was specifically chosen as the parent compositions are cubic ( x = 0) and hexagonal ( x = 1). It is found that the formation of hexagonal phases occurs for the x ≥ 0.6 samples, whereas its phase fraction monotonically increases with x until the pure hexagonal Fe 2 MnGe is formed. The change in structure results in high sensitiveness of both the saturation of magnetization ($M_S$) and Curie temperature ($T_C$) with x values, related to a strong magnetocrystalline anisotropy of the hexagonal phase. Both cubic and hexagonal magnetic features were qualitatively reproduced by Density Functional Theory (DFT) calculations. This work provides an experimental and theoretical foundation for further design of Heusler systems with controlled structures and magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2017

First-Principle Investigation of V and Cr Doping on the Dilute Magnetic Semiconducting Properties of Rutile SnO{sub 2}: a Modified Becke-Johnson (TB-mBJ) Exchange Potential Study

Theoretical investigations on rutile SnO{sub 2} doped with V and Cr were performed by using recently implemented Tran and Blaha’s modified Becke-Johnson exchange potential model (TB-mBJ) based on density functional theory. The electronic, magnetic, dielectric and optical properties of V and Cr-doped tin oxide have been calculated by full-potential linearized augmented plane wave method (FP-LAPW) by WIEN2k code. The present works demonstrate accurate prediction of band structures and properties using the TB-mBJ model. The calculated values of magnetic moment, dielectric constant and refractive index of doped and undoped compounds agree well with the experimental results. The TB-mBJ model is a direct method without using empirical corrections and hence, the furnished data are useful in material modelling for spintronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Robust ferromagnetism in Mn-doped MoS{sub 2} nanostructures

Layered transition metal dichalcogenides (TMDs) have attracted extensive attention due to their interesting properties originating from an effective honeycomb lattice and strong spin-orbit coupling, and have potential applications in catalysis, lithium batteries, photonic, electronic, and valleytronic devices. Introducing magnetism in the TMDs can lead to the interesting functionalities such as magnetic order and carrier spin polarization with potential applications in spintronics. Here, we demonstrate an effective approach to induce robust ferromagnetism in MoS{sub 2} nanostructures by transition metal doping. After doping with a few percent Mn{sup 2+}, the magnetism of MoS{sub 2} nanostructures is enhanced dramatically. Moreover, the magnetic properties are strongly temperature dependent, which is clearly different from the behavior of defect-induced magnetism. Our approach opens up the possibility for tuning the spin and magnetic properties in two-dimensional nanostructures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Tailoring the Magnetic and Hyperthermic Properties of Biphase Iron Oxide Nanocubes through Post-Annealing

Tailoring the magnetic properties of iron oxide nanosystems is essential to expanding their biomedical applications. In this study, 34 nm iron oxide nanocubes with two phases consisting of Fe3O4 and α-Fe2O3 were annealed for 2 h in the presence of O2, N2, He, and Ar to tune the respective phase volume fractions and control their magnetic properties. X-ray diffraction and magnetic measurements were carried out post-treatment to evaluate changes in the treated samples compared to the as-prepared samples, showing an enhancement of the α-Fe2O3 phase in the samples annealed with O2 while the others indicated a Fe3O4 enhancement. Furthermore, the latter samples indicated enhancements in crystallinity and saturation magnetization, while coercivity enhancements were the most significant in samples annealed with O2, resulting in the highest specific absorption rates (of up to 1000 W/g) in all the applied fields of 800, 600, and 400 Oe in agar during magnetic hyperthermia measurements. The general enhancement of the specific absorption rate post-annealing underscores the importance of the annealing atmosphere in the enhancement of the magnetic and structural properties of nanostructures.

Crystallography↗
DOE OSTI2025

Direct measurement of reduced exchange stiffness and its impact on magnetic vortex behavior in PyGd alloys

Thin films composed of sputtered transition metal/rare earth (TM/RE) ferrimagnets have emerged as promising building blocks for future spintronic devices, offering tunable magnetic properties critical for data storage, memory, and logic applications. However, understanding how the combination of TM and RE elements influences effective magnetic properties, such as exchange stiffness (Aex), remains challenging. Magnetic vortices provide a versatile tool for probing these properties in thin film systems. By combining magnetic imaging via soft x-ray microscopy and micromagnetic modeling, we quantify the effective exchange stiffness in PyGd ferrimagnetic disks with varying Gd concentrations. Our results indicate a reduction in Aex to below 3 pJ/m for a 20% Gd concentration when compared to reference Py, and values below 2 pJ/m for 30% Gd, reflecting weak Ni–Gd exchange coupling. These findings highlight the critical role of rare earth content in tuning the exchange stiffness. The reduced exchange stiffness facilitates a linear field response of the magnetization up to the edge of the disk, as well as significant deformations in the vortex core itself when compared to films with larger Aex. Our results are in line with, albeit lower than, recent measurements of the exchange stiffness in intermixed PyGd. This reduced exchange stiffness has implications for the development of spintronic devices based on ferrimagnetic skyrmions.

Jacob, Liyan↗
DOE OSTI2016

Magnetic hysterysis evolution of Ni-Al alloy with Fe and Mn substitution by vacuum arc melting to produce the room temperature magnetocaloric effect material

The development of magnetocaloric effect (MCE) material is done in order to reduce the damage of the ozone layer caused by the chlorofluorocarbons (CFCs) emitted into the air. The research dealing with synthesis of magnetocaloric materials based of Ni-Al Heusler Alloy structure and by varying substitution some atoms of Ni with Fe and Al with Mn on Ni-Al Heusler Alloy structure to become Ni{sub 44}Fe{sub 6}Mn{sub 32}Al{sub 18}. Vacuum Arc Melting (VAM) equipment is used to form the alloys on vacuum condition and by flowing argon gas atmosphere and then followed by annealing process for 72 hours. X-Ray Diffraction (XRD) reveals that crystallite structure of material is observed. We define that Ni{sub 44}Fe{sub 6} as X{sub 2}, Mn{sub 25} as Y, and Al{sub 18}Mn{sub 7} as Z. Based on the XRD result, we observed that the general formula X{sub 2}YZ is not changed. The PERMAGRAF measurement revealed that there exists of magnetic hysterysis. The hysterysis show that the magnetic structures of the system undego evolution from diamagnetic to soft ferromagnetic material which all of the compound have the same crystallite structure. This evolution indicated that the change in the composition has led to changes the magnetic composition. Mn is the major element that gives strong magnetic properties to the sample. When Mn partially replaced position of Al, the sample became dominant to be influenced to improve their magnetic properties. In addition, substitution a part of Ni by Fe in the composition reveals a pinning of the domain walls in the sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Recycled Sm-Co bonded magnet filaments for 3D printing of magnets

Recycling of rare earth elements, such as Sm and Nd, is one technique towards mitigating long-term supply and cost concerns for materials and devices that depend on these elements. In this work recycled Sm-Co powder recovered from industrial grinding swarfs, or waste material from magnet processing, was investigated for use in preparation of filament for 3D printing of bonded magnets. Recycled Sm-Co powder recovered from swarfs was blended into polylactic acid (PLA). Up to 20 vol.% of the recycled Sm-Co in PLA was extruded at 160°C to produce a filament. It was demonstrated that no degradation of magnetic properties occurred due to the preparation or extrusion of the bonded magnet material. Good uniformity of the magnetic properties is exhibited throughout the filament, with the material first extruded being the exception. The material does exhibit some magnetic anisotropy, allowing for the possibility of the development of anisotropic filaments. Finally, this work provides a path forward for producing recycled magnetic filament for 3D printing of permanent magnets.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Competing magnetic effects due to the incorporation of oxygen in thin films of (ZnCo)O

We have investigated the magnetic properties of ZnCoO thin films grown by pulsed laser deposition from targets made from pure ZnO combined with metallic Co, CoO or Co 3 O 4 as a function of oxygen pressure in the deposition chamber. We find that the structural and magnetic properties of films grown from targets containing CoO or Co 3 O 4 are similar and can be mapped on to each other by assuming that the films made from CoO require some additional oxygen to make them the same as those grown from Co 3 O 4 . The data suggest that the magnetism in these films is due to oxygen vacancies. Radically different properties are seen for the films grown with metallic Co in the target. In this case, there is structural evidence for the production of Zn vacancies as oxygen was added during deposition and this was accompanied by a strong increase of the magnetisation. Finally, in contrast, there was very little difference seen between the magnetic properties of the targets, which were all found to be paramagnetic, even after further annealing in air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

MAGNETIC ACTIVITY ANALYSIS FOR A SAMPLE OF G-TYPE MAIN SEQUENCE KEPLER TARGETS

The variation of a stellar light curve owing to rotational modulation by magnetic features (starspots and faculae) on the star’s surface can be used to investigate the magnetic properties of the host star. In this paper, we use the periodicity and magnitude of the light-curve variation as two proxies to study the stellar magnetic properties for a large sample of G-type main sequence Kepler targets, for which the rotation periods were recently determined. By analyzing the correlation between the two magnetic proxies, it is found that: (1) the two proxies are positively correlated for most of the stars in our sample, and the percentages of negative, zero, and positive correlations are 4.27%, 6.81%, and 88.91%, respectively; (2) negative correlation stars cannot have a large magnitude of light-curve variation; and (3) with the increase of rotation period, the relative number of positive correlation stars decreases and the negative correlation one increases. These results indicate that stars with shorter rotation period tend to have positive correlation between the two proxies, and a good portion of the positive correlation stars have a larger magnitude of light-curve variation (and hence more intense magnetic activities) than negative correlation stars.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2018

Nanoscale analysis of dispersive ferroelectric domains in bulk of hexagonal multiferroic ceramics

Highlights: • Aberration corrected STEM is used to link ferroelectric properties of vacancy doped multiferroic LuMnO3 ceramics to lattice defects. • Nano-scale perturbation in lattice or chemistry provokes polarization switching or phase shift of ferroelectric domains. • Partial edge dislocations modify rule of 6 in topologically protected 6-fold vortices in hexagonal RMnO3 ceramics. • Chemistry shift/lattice distortions modify ferroelectric properties, domain size and polarization switching in multiferroic. • Change in ferroelectric properties results in modification of magnetic properties in magnetoelectric h-RMnO3 multiferroic. - Abstract: The atomic nature of topologically protected ferroelectric (FE) walls in hexagonal ReMnO{sub 3} oxides (R: Sc, Y, Er, Ho, Yb, Lu) creates an interesting playground to study effects of defects on domain walls. The 6-fold FE vortices in this multiferroic family lose the ordering by the rule of 6 in the presence of partial edge dislocations (PED) besides it can be modified by chemical doping. Therefore, it is essential to comprehend the cross coupling of FE walls and defects or vacancies in the lattice of multiferroics. Atomic resolution STEM is used to explore the correlative response of electrical polarization of FE domains in the presence of defects in multiferroic ceramics. Such level of resolution also allows the study of switching of FE domains on encounter of lattice defects. The driving force behind appearance of dispersed, small FE domains in images of piezo force microscopy is revealed by observation of lattice defects and FE boundaries simultaneously at the nano-scale. Planar defects and FE domain walls play their role of internal interfaces consequently such interplaying duly modifies the magnetic and FE properties of multiferroic oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Voltage-controlled magnetic anisotropy enabled by resistive switching

The discovery of new mechanisms of controlling magnetic properties by electric fields or currents furthers the fundamental understanding of magnetism and has important implications for practical use. Here, we present an approach of utilizing resistive switching to control magnetic anisotropy. We study a ferromagnetic oxide that exhibits an electrically triggered metal-to-insulator phase transition producing a volatile resistive switching. The switching occurs in a characteristic spatial pattern, the formation of an insulating barrier perpendicular to the current flow, which results in an unusual ferromagnetic/paramagnetic/ferromagnetic configuration. Further, the formation of this voltage-driven paramagnetic insulating barrier is accompanied by the emergence of a strong uniaxial magnetic anisotropy that overpowers the intrinsic material anisotropy. Our results demonstrate that resistive switching is an effective tool for manipulating magnetic properties. Because resistive switching can be induced in a broad range of materials, our findings could enable a new class of voltage-controlled magnetism systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Ab initio study of vacancy formation in cubic LaMnO{sub 3} and SmCoO{sub 3} as cathode materials in solid oxide fuel cells

Doped LaMnO{sub 3} and SmCoO{sub 3} are important solid oxide fuel cell cathode materials. The main difference between these two perovskites is that SmCoO{sub 3} has proven to be a more efficient cathode material than LaMnO{sub 3} at lower temperatures. In order to explain the difference in efficiency, we need to gain insight into the materials’ properties at the atomic level. However, while LaMnO{sub 3} has been widely studied, ab initio studies on SmCoO{sub 3} are rare. Hence, in this paper, we perform a comparative DFT + U study of the structural, electronic, and magnetic properties of these two perovskites. To that end, we first determined a suitable Hubbard parameter for the Co d–electrons to obtain a proper description of SmCoO{sub 3} that fully agrees with the available experimental data. We next evaluated the impact of oxygen and cation vacancies on the geometry, electronic, and magnetic properties. Oxygen vacancies strongly alter the electronic and magnetic structures of SmCoO{sub 3}, but barely affect LaMnO{sub 3}. However, due to their high formation energy, their concentrations in the material are very low and need to be induced by doping. Studying the cation vacancy concentration showed that the formation of cation vacancies is less energetically favorable than oxygen vacancies and would thus not markedly influence the performance of the cathode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Magnetic order in a quenched-high-temperature-phase of Cu-doped MnBi

Permanent magnets are of great importance due to their vast applications. MnBi has been proposed to be a potential permanent magnet that can be widely used while past efforts have been focused on optimizing the ferromagnetic low-temperature phase of MnBi. Herein, we report a series of new materials, Cu x Mn 1–x Bi, crystallizing in a quenched high-temperature-phase (QHTP) MnBi-related structure. In this study, we synthesized single crystals of Cu x Mn 1–x Bi and found that they crystallize in an unreported trigonal structure (P$\bar{3}$1c). Magnetic properties measurements imply high-temperature antiferromagnetic (AFM) ordering and low-temperature ferromagnetic or ferrimagnetic (FM/FiM) ordering. By analyzing the doping effect on crystal structure and magnetic properties, we established a magnetic phase diagram for Cu-doped MnBi and attributed the AFM and FM/FiM to two different atomic sites of Mn.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Tunable magnetism in metal adsorbed fluorinated nanoporous graphene

Developing nanostructures with tunable magnetic states is crucial for designing novel data storage and quantum information devices. Using density functional theory, we study the thermodynamic stability and magnetic properties of tungsten adsorbed tri-vacancy fluorinated (TVF) graphene. We demonstrate a strong structure-property relationship and its response to external stimuli via defect engineering in graphene-based materials. Complex interplay between defect states and the chemisorbed atom results in a large magnetic moment of 7 μ B along with high in-plane magneto-crystalline anisotropy energy (MAE) of 17 meV. Under the influence of electric field, spin crossover effect accompanied by a change in the MAE is observed. The ascribed change in spin-configuration is caused by the modification of exchange coupling between defect states and a change in the occupation of d-orbitals of the metal complex. In conclusion, our predictions open a promising way towards controlling the magnetic properties in graphene based spintronic and non-volatile memory devices.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Effect of Annealing Temperature on Magnetic and Mössbauer Properties of ZnFe{sub 2}O{sub 4} Nanoparticles by Sol-gel Approach

In this study, spinel ZnFe{sub 2}O{sub 4} nanoparticles (NPs) were synthesized by citrate sol-gel route using nickel nitrates, ferric nitrates and citric acid by annealing at 900, 1000, and 1100{sup ∘}C. We reported the structural and magnetic properties (including Mössbauer analysis) for anisotropy ZnFe{sub 2}O{sub 4} NPs annealed at different temperatures. Fourier transform infrared (FT-IR) and X-ray powder diffraction (XRD) were utilized to analyze the structural properties of magnetic nanoparticles (MNPs). Morphological features of resultant MNPs were examined by scanning electron microscopy (SEM). The observed XRD results displayed that the crystallite size increased from 38.60 to 49.28 nm with increasing the annealing temperature in a distinct linear trend. The enhancement of saturation magnetization of the uniaxial ZnFe{sub 2}O{sub 4} NPs was studied and varied from 1.28 to 1.66 emu/g as the annealing temperature increases. The Mössbauer spectra results show that ZnFe{sub 2}O{sub 4} ferrites were paramagnetic in nature at room temperature (RT).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Tungsten-encapsulated gadolinium nanoislands with enhanced magnetocaloric response

Here, we report a method for growing chemically pure, oxide-free, air-stable Gd nanoislands with enhanced magnetic properties. These nanoislands are grown by solid-state dewetting and are fully encapsulated in tungsten such that they remain stable in ambient environments. They display good crystalline properties with hexagonally close-packed crystal structure and strong preferential orientation. We show that the choice of substrate strongly affects their shape, crystal orientation, and magnetic properties. The temperature-dependent magnetic coercivity and remanence of the Gd islands can vary by as much as a factor of three depending on the substrate used. The magneto- caloric properties of Gd islands grown on a sapphire substrate exceed those of high-quality Gd thin films.

36 MATERIALS SCIENCE↗