Search NASA⌕ Search

SEARCH · Search NASA

Results for “MAGNETOMETERS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Synthesis of single-phase Sr{sub 3}Co{sub 2}Fe{sub 24}O{sub 41} Z-type ferrite by polymerizable complex method

Highlights: {yields} Single-phase Sr{sub 3}Co{sub 2}Z was obtained in a very narrow temperature range. {yields} Sr{sub 3}Co{sub 2}Z ferrite prepared by polymerizable complex method showed typical M-H curve of soft ferrite. -- Abstract: Synthesis of single-phase Sr{sub 3}Co{sub 2}Fe{sub 24}O{sub 41} Z-type (Sr{sub 3}Co{sub 2}Z) ferrite was realized by adopting the polymerizable complex method. Crystal structure of samples has been investigated by powder X-ray diffraction (XRD). Single-phase Sr{sub 3}Co{sub 2}Z ferrite was obtained by heating at 1473 K for 5 h in air. Magnetic properties were discussed by measurements of M-H curves with vibrating sample magnetometer (VSM). Sr{sub 3}Co{sub 2}Z ferrite prepared by polymerizable complex method showed typical M-H curve of soft ferrite, with a saturation magnetization of 21.5{mu}{sub B}/formula unit (50.5 emu/g) and a coercive force of 0.014 T at room temperature.

36 MATERIALS SCIENCE↗

Moessbauer and magnetic study of Mn, Zr and Cd substituted W-type hexaferrites prepared by co-precipitation

Highlights: {yields} Zr and Cd ions substitute tetrahedral 4e and 4f{sub IV} sites while Mn ions occupy octahedral 6g and 4f sites. {yields} Doping of W-type hexaferrites with Mn, Zr and Cd improves the values of M{sub s} and M{sub r}. {yields} The enhancement of magnetic characteristic togetherwith the formation of rice shaped W-type hexaferrites nanoparticles is promising for imaging and sensing devices. {yields} The synthesized materials are suitable for magnetic data storage with high density. -- Abstract: BaCo{sub 2-x}Mn{sub x}Fe{sub 16-2y}(Zr-Cd){sub y}O{sub 27} (x = 0-0.5 and y = 0-1.0) hexaferrite nanocrystallites of average sizes in the range of 33-42 nm are synthesized by the chemical co-precipitation method. The synthesized materials are characterized using different techniques including X-ray diffraction (XRD), energy dispersive X-ray florescence (ED-XRF), scanning electron microscope (SEM), Moessbauer spectrometer and vibrating-sample magnetometer (VSM). Based on analysis of the data obtained from Moessbauer spectral studies, doping is believed to have occurred preferably in the vicinity of 12k sub-lattice, i.e. f{sub IV} (4e, 4f{sub IV}), 2b (6g, 4f) and 2d site. Variations in the saturation magnetization (77.1-60.9 emu g{sup -1}), remanent magnetization (22.08-31.23 emu g{sup -1}) and coercivity (1570.1-674.7 Oe) exhibit tunable behavior with dopant content and therefore can be useful for application in various magnetic devices.

36 MATERIALS SCIENCE↗

Magnetic properties of magnetite nanoparticles coated with mesoporous silica by sonochemical method

Highlights: Black-Right-Pointing-Pointer MCM-41-coating of magnetite nanoparticles performed under ultrasonic irradiation. Black-Right-Pointing-Pointer Ultrasonic irradiation accelerates the formation of the MCM-41 framework. Black-Right-Pointing-Pointer The hysteretic response to an applied field was investigated applying FORC diagram. Black-Right-Pointing-Pointer The average coercive field of the Fe{sub 3}O{sub 4} nanoparticles increased after coating. -- Abstract: In this paper we present the magnetic properties of mesoporous silica-coated Fe{sub 3}O{sub 4} nanoparticles. The coating of magnetite nanoparticles with mesoporous silica shell was performed under ultrasonic irradiation. The obtained mesoporous silica-coated magnetite nanoparticles were characterized by powder X-ray diffraction, focused ion beam-scanning electron microscopy, nitrogen adsorption-desorption isotherms and vibrating sample magnetometer. The hysteretic behavior was studied using first-order reversal curves diagrams. The X-ray diffraction result indicates that the extreme chemical and physical conditions created by acoustic cavitations have an insignificant effect on crystallographic structural characteristic of magnetite nanoparticles. Changes in the coercivity distributions of the magnetite nanoparticles were observed on the first-order reversal curves diagrams for the samples with coated particles compared with the samples containing uncoated particles of magnetite. The coated particles show an increased most probable coercivity of about 20% compared with the uncoated particles which can be associated with an increased anisotropy due to coating even if the interaction field distribution measured on the diagrams are virtually identical for coated/uncoated samples.

36 MATERIALS SCIENCE↗

Cellulose-precursor synthesis of nanocrystalline Co{sub 0.5}Cu{sub 0.5}Fe{sub 2}O{sub 4} spinel ferrites

Highlights: Black-Right-Pointing-Pointer Synthesis of spinel copper cobalt nanoferrite particles from a cellulose precursor for the first time. Control of nanosize and properties of nanoferrites can take place by varying the calcining temperature. The simple, low cost, easy cellulose process is a choice of nanoparticle processing technology. -- Abstract: Nanocrystalline Cu{sub 0.5}Co{sub 0.5}Fe{sub 2}O{sub 4} powders were prepared via a metal-cellulose precursor synthetic route. Cellulose was used as a fuel and a dispersing agent. The resulting precursors were calcined in the temperature range of 450-600 Degree-Sign C. The phase development of the samples was determined by using Fourier transform infrared (FT-IR) spectroscopy and powder X-ray diffraction (XRD). The field-dependent magnetizations of the nanopowders were measured by vibrating sample magnetometer (VSM). All XRD patterns are of a spinel ferrite with cubic symmetry. Microstructure of the ferrites showed irregular shapes and uniform particles with agglomeration. From XRD data, the crystallite sizes are in range of 16-42 nm. Saturation magnetization and coercivity increased with increasing calcining temperature due to enhancement of crystallinity and reduction of oxygen vacancies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel magnetically separable TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofiber with high photocatalytic activity under UV-vis light

Graphical abstract: A novel magnetically separable composite photocatalyst TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofiber was prepared by sol-gel method and electrospinning technique, which can be reclaimed with a magnet, and the decolorizing efficiency of MB solution reached 95.87%. Highlights: Black-Right-Pointing-Pointer The composite TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofibers with diameter of 110 {+-} 28 nm have been successfully synthesized by the combination of sol-gel method and electrospinning technique. Black-Right-Pointing-Pointer The presence of Co{sup 2+} or/and Fe{sup 3+} ions may occupy some of the lattice sites of TiO{sub 2} to form an iron-titanium solid solution and narrow the band gap, which broadens the response region of visible light. Black-Right-Pointing-Pointer The resultant nanofibers not only have high decomposition efficiency with methylene blue (MB) under the UV irradiation, which is close to that of Degussa P25, but also can be separated with a magnet and avoid the secondary pollution of the treated water. -- Abstract: A novel magnetically separable heterogeneous photocatalyst TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofiber was prepared by sol-gel method and electrospinning technology, followed by heat treatment at 550 Degree-Sign C for 2 h. The phase structure, morphology and magnetic property of the composite nanofibers were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscope and vibrating sample magnetometer analysis. The photocatalytic studies of TiO{sub 2}/CoFe{sub 2}O{sub 4} fibers suggested that the presence of CoFe{sub 2}O{sub 4} not only enhanced the absorbance of UV light, but also broadened the response region to visible light. The decolorizing efficiency of methylene blue (MB) solution reaches 95.87% over TiO{sub 2}/CoFe{sub 2}O{sub 4} nanofibers under 300 W Hg lamp after 5 h, which is close to that of Degussa P25. Furthermore, these fibers can be collected with a magnet for reuse and effectively avoid the secondary pollution of the treated water.

36 MATERIALS SCIENCE↗

Synthesis, characterization and magnetic performance of Co-incorporated ordered mesoporous carbons

Highlights: Black-Right-Pointing-Pointer A facile one-pot aqueous self-assembly strategy for the synthesis Co-incorporated ordered mesoporous carbons (Co-OMCs). Black-Right-Pointing-Pointer Co-OMCs exhibit typical ferromagnetic characteristics. Black-Right-Pointing-Pointer Saturation magnetization strength can be easily adjusted by changing the content of cobalt. Black-Right-Pointing-Pointer Carbonization temperatures have significant effects on the structure and magnetic properties of Co-OMCs. -- Abstract: Co-incorporated ordered mesoporous carbon (Co-OMC) with magnetic frameworks has been synthesized via a one-pot self-assembly strategy. The effects of cobalt loading on carbon matrix, adsorption properties and magnetic properties of the resultant mesostructured cobalt/carbon composites were investigated by nitrogen sorption, X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TG) and magnetometer measurements. The results show that the mesoporous composites with a high cobalt content (such as 18.0 wt%) possess an ordered and uniform mesoporous structure (5.3 nm), high surface areas (up to 687 m{sup 2}/g) and high pore volumes (up to 0.54 cm{sup 3}/g). Cobalt nanoparticles of size 4-9 nm are confined inside the mesopores or walls of the mesoporous carbon. These materials exhibit typical ferromagnetic characteristics. The saturation magnetization strength can be easily adjusted by changing the content of cobalt. The carbonization temperatures have significant effects on the structure and magnetic properties of Co-OMC also.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of magnetic photocatalyst nanoparticles—TiO{sub 2}/SiO{sub 2}/Mn–Zn ferrite—and its photocatalytic activity influenced by silica interlayer

Highlights: ► TiO{sub 2}/SiO{sub 2}/Mn–Zn ferrite acts as magnetic photocatalyst nanoparticle. ► SiO{sub 2} interlayer is used to prevent electron migration between photocatalyst and magnetic core. ► TiO{sub 2}/Mn–Zn ferrite without SiO{sub 2} interlayer shows poor magnetic and photocatalytic property. -- Abstract: A magnetic photocatalyst, TiO{sub 2}/SiO{sub 2}/Mn–Zn ferrite, was prepared by stepwise synthesis involving the co-precipitation of Mn–Zn ferrite as a magnetic core, followed by a coating of silica as the interlayer, and titania as the top layer. The particle size and distribution of magnetic nanoparticles were found to depend on the addition rate of reagent and dispersing rate of reaction. The X-ray diffractometer and transmission electron microscope were used to examine the crystal structures and the morphologies of the prepared composites. Vibrating sample magnetometer was also used to reveal their superparamagnetic property. The UV–Vis spectrophotometer was employed to monitor the decomposition of methylene blue in the photocatalytic efficient study. It was found that at least a minimum thickness of the silica interlayer around 20 nm was necessary for the inhibition of electron transference initiated by TiO{sub 2} and Mn–Zn ferrite.

36 MATERIALS SCIENCE↗

Preparation and characterization of multi-walled carbon nanotubes with nickel–phosphorous layers of high magnetic properties

Highlights: ► Impurities in crude MWNTs were effectively removed after purification treatment. ► Many Ni nanoparticles were homogenously coated on the purified MWNTs. ► The saturation magnetization (Ms) of the MWNTs with Ni–P layers is 91.5 emu/g. -- Abstract: The multi-wall carbon nanotubes (MWNTs) with nickel–phosphorous (Ni–P) layers were prepared by electroless plating method. To obtain the MWNTs with Ni–P layers of high magnetic properties, an effective purification treatment and a pre-treatment procedure were developed. The crude MWNTs, the purified MWNTs and the MWNTs with Ni–P layers were characterized by scanning electron microscope (SEM)/energy dispersive spectroscopy (EDS), transmission electron microscope (TEM), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM). SEM results, TEM images and XRD results indicate that impurities in the crude MWNTs were effectively removed after the purification treatment and a large number of Ni nanoparticles were homogenously coated on the surface of the purified MWNTs. According to the VSM test, the saturation magnetization (Ms) of the MWNTs with Ni–P layers is 91.5 emu/g which is higher than results of other researchers.

36 MATERIALS SCIENCE↗

Improvements in electrical and dielectric properties of substituted multiferroic LaMnO{sub 3} based nanostructures synthesized by co-precipitation method

Graphical abstract: Display Omitted Highlights: ► Simultaneous double ion substitutions philosophy is introduced in LaMnO{sub 3}. ► La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles are not reported previously. ► La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles are synthesized by co-precipitation method. ► The 12 fold increase in resistivity of LaMnO{sub 3} nanostructures is observed. -- Abstract: A series of La{sub 1−x}Gd{sub x}Mn{sub 1−y}Cr{sub y}O{sub 3} nanoparticles (where x, y = 0, 0.25, 0.50, 0.75 and 1.0) has been synthesized by the chemical co-precipitation method, involving double ion substitution philosophy. The nanoparticles were characterized by thermo gravimetric analysis (TGA), X-ray fluorescence spectrometry (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, vibrating sample magnetometer (VSM), DC electrical resistivity and dielectric measurements. The XRD and FTIR analysis confirmed the single orthorhombic phase and the crystallite size were found in the range of 16–34 nm. DC resistivity exhibited very interesting behavior which increased from 1.41 × 10{sup 8} to 16.35 ± 0.2 × 10{sup 8} Ω cm upon complete double ions replacement of La and Mn with Gd and Cr, respectively. This very high resistivity variation upon substitution definitely would open new avenues for applications of these materials in microwave devices and other related areas. The dielectric properties of these nanoparticles were also studied at room temperature in the range of 6 kHz to 5 MHz and the maximum dielectric behavior (ε′ = 2.86 × 10{sup 3}, tan δ = 5.41, ε″ = 15.5 × 10{sup 3}) was exhibited by La{sub 0.75}Gd{sub 0.25}Mn{sub 0.75}Cr{sub 0.25}O{sub 3} at 6 kHz. Hysteresis loops measurements showed that the synthesized nanomaterials are paramagnetic in nature at room temperature.

36 MATERIALS SCIENCE↗

Facilely preparation and microwave absorption properties of Fe{sub 3}O{sub 4} nanoparticles

Highlights: ► A bran-new method is firstly used to fabricate Fe{sub 3}O{sub 4} nanoparticles. ► The detailed analysis of formation mechanism is discussed. ► The electromagnetic absorption properties are defined. ► The effect of nanometer-sized is considered for the excellent microwave absorption. - Abstract: The Fe{sub 3}O{sub 4} nanoparticles were prepared by a novel wet-chemical method which shows its highly synthesizing efficiency and controllability. A possible formation mechanism was also proposed to explain the synthesizing process. X-ray diffraction (XRD) and transmission electron microscope (TEM) were employed and yielded an examination of an average diameter of 77 nm of the as-synthesized Fe{sub 3}O{sub 4} nanoparticles with face-centered cubic structure. Vibrating sample magnetometer (VSM) and vector network analyzer were employed to measure the magnetic property and electromagnetic parameters of the nanoparticles, then reflection losses (RL (dB)) were calculated in the frequency range of 2–18 GHz. A large saturation magnetization (72.36 emu/g) and high coercivity (95 Oe) were determined and indicated that the Fe{sub 3}O{sub 4} nanoparticles own strong magnetic performance. Following simulation results showed that the lowest reflection loss of the sample was −21.2 dB at 5.6 GHz with layer thickness of 6 mm. Effect of nanometer-sized further provided an explanation for the excellent microwave absorption behavior shown by the Fe{sub 3}O{sub 4} nanoparticles.

36 MATERIALS SCIENCE↗

Intrinsic magnetic, structural and resistivity properties of ferromagnetic Mn{sub 0.5}Zn{sub 0.5}Al{sub x}Fe{sub 2−x}O{sub 4} nanoparticles

Highlights: ► Al{sup 3+} ion substituted Mn–Zn ferrite nanoparticles. ► Single phase cubic spinel structure changes with Al{sup 3+} substitution. ► Magnetization and coercivity decreased with increasing Al{sup 3+}. ► Resistivity increased with Al{sup 3+} substitution. - Abstract: In this work the nano-structural, magnetic and resistivity properties of Al{sup 3+} substituted Mn–Zn ferrites powders were investigated. Mn{sub 0.5}Zn{sub 0.5}Al{sub x}Fe{sub 2−x}O{sub 4} powders, where x = 0.0, 0.1, 0.2, 0.3, 0.4 and 0.5 were obtained by the sol–gel auto-combustion method. X-ray diffraction data indicate that, after substitution, all the samples consisted of the main spinel phase in combination with a small amount of a foreign Al{sub 2}O{sub 3} phase. The addition of Al{sup 3+} resulted in a reduction of particle size and density of the prepared samples. Cation distribution in the present study was estimated by using X-ray diffraction data. The tetrahedral site radii initially increased with Al{sup 3+} content while the octahedral site radii decreased with the Al{sup 3+} substitution. FTIR spectra show two strong absorption bands at 529–548 cm{sup −1} and 445–452 cm{sup −1} which are the typical bands for the cubic spinel crystal structure. The magnetic properties were measured by employing a vibrating sample magnetometer. It was observed that the saturation magnetization, coercivity and anisotropy field decreased with the increase of Al{sup 3+} substitution. Introduction of Al{sup 3+} ions into the Mn–Zn ferrite increased the values of the resistivity, especially in the lower temperature range.

36 MATERIALS SCIENCE↗

Simple polyol route to synthesize heptanoic acid coated magnetite (Fe{sub 3}O{sub 4}) nanoparticles

Highlights: ► Heptanoic acid@Fe{sub 3}O{sub 4} nanocomposite has been prepared via simple polyol. ► Heptanoic acid used as both surfactant and solvents. ► Magneto polymer composite with adjustable Ea has a potential usage as functional composites. - Abstract: Magnetite (Fe{sub 3}O{sub 4}) nanoparticles were prepared via polyol method by using FeCl{sub 2} as only source of iron. As-prepared samples were characterized by powder X-ray diffractometer (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), thermal gravimetric analyzer (TGA) and vibrating sample magnetometer (VSM). Crystalline phase was identified as Fe{sub 3}O{sub 4} and the crystallite sizes were calculated as 19.1 ± 1.1 and 22 ± 1.3 nm for uncalcinated and calcinated products from X-ray line profile fitting. The capping of heptanoic acid around Fe{sub 3}O{sub 4} nanoparticles was confirmed by FT-IR spectroscopy, the interaction being via bridging oxygen's of the carboxylate and the nanoparticle surface and also by TG analysis. VSM measurements showed that both samples exhibited typical superparamagnetic behavior at room temperature with different Ms values. The ε′ decreases with increasing frequency for both composites and permeability has almost same values for all temperatures at higher frequencies. As synthesized and calcinated samples conductivity increase linearly with the temperature.

36 MATERIALS SCIENCE↗

Facile fabrication and characterization of amino-functionalized Fe{sub 3}O{sub 4} cluster@SiO{sub 2} core/shell nanocomposite spheres

Highlights: ► A method developed for the preparation of Fe{sub 3}O{sub 4} clusters@SiO{sub 2} nanocomposites. ► This method permits production of core/shell nanomaterials with high yields. ► Resultant superparamagnetic particles are monodisperse with high magnetizations. - Abstract: We developed a modified straightforward method for the fabrication of uniformly sized silica-coated magnetite clusters core/shell type nanocomposite particles. Proposed simple one-step processing method permits quick production of materials in high yield. The structural, surface, and magnetic characteristics of the nanocomposite particles were investigated by transmission electron microscopy (TEM), scanning electron microscope (SEM), powder X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Fourier-transform infrared (FTIR). The sphere-shaped particles almost have the average diameter of 120 nm, with a magnetic cluster core of 80 ± 15 nm, and a silica shell of 25 ± 10 nm thickness. The particles are superparamagnetic and present strong magnetization (18 emu/g) due to the fact that they possess core of the magnetic clusters. Subsequently, the silica surface of core/shell particles was amino-functionalized via N-(2-aminoethyl)-3-aminopropyltrimethoxysilane (EDS). Findings of the present work highlight the potential for using amino-functionalized magnetic silica core/shell nanocomposite particles in biological applications since they possess useful magnetic properties and proper structure.

36 MATERIALS SCIENCE↗

Multifunctional Fe{sub 3}O{sub 4}@C@Ag hybrid nanoparticles: Aqueous solution preparation, characterization and photocatalytic activity

Highlights: ► Ag-loaded Fe{sub 3}O{sub 4}@C magnetic-optical bifunctional materials have been investigated. ► The magnetism was studied at the room temperature. ► The photocatalytic activity was evaluated under visible light irradiation. ► Ag-loaded Fe{sub 3}O{sub 4}@C nanocomposites show superior magnetism and photocatalytic activity. ► A simple synthetic process was discussed. - Abstract: The paper describes a kind of multifunctional Fe{sub 3}O{sub 4}@C@Ag hybrid nanoparticles, which can be successfully synthesized using a simple route based on directly adsorption and spontaneous reduction of silver ions onto the surface shell of carbon-coated magnetic nanoparticles. The as-prepared samples have been characterized by transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Fourier transform infrared (FT-IR) spectrum, vibrating sample magnetometer (VSM) and UV–vis spectrum (UV–vis). The Ag nanocrystals loaded on the surface shell of carbon-coated magnetic nanoparticles are nearly spherical with an average diameter of 10 nm. And the carbonaceous polysaccharides shell obtained using an glucose hydrothermal reaction act as a role of a bridge between magnetic Fe{sub 3}O{sub 4} core and noble metallic Ag nanocrystals. The as-prepared samples can be used as an effective catalyst for the photodegradation of organic dyes (neutral red) under the exposure of visible light. Results show that the as-prepared samples have a degradation rate of 93.7% for dyes within 30 min, which indicates their high-efficiency and rapid photocatalytic activity.

36 MATERIALS SCIENCE↗

Microstructures, magnetic and electric properties of diluted magnetic semiconductors InTe{sub 1−x} Fe{sub x} (Co{sub x})

Highlights: ► The prepared InTe{sub 0.9}Fe{sub 0.1} was found to be ferromagnetic at room temperature and can be characterized as diluted magnetic semiconductors. ► The presence of staking faults, various types of defects, strained lattice, grain boundaries and the impurity of minor non-magnetic phase were suggested to participate in high temperature ferromagnetism. - Abstract: InTe compound doped by 10% of Fe or Co respectively was synthesized. X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), energy dispersive X-ray (EDX), vibrating sample magnetometer (VSM) and Kiethley electrometer were used for characterizing the prepared samples. XRD show the presence of InTe{sub 0.9}Fe{sub 0.1} or InTe{sub 0.9}Co{sub 0.1} together with minor In{sub 4}Te{sub 3} phase. InTe{sub 0.9}Fe{sub 0.1} is ferromagnetic with high Curie and high blocking temperature, while InTe{sub 0.9}Co{sub 0.1} is antiferromagnetic with two high Neels temperatures. σRT of InTe{sub 0.9}Fe{sub 0.1} and InTe{sub 0.9}Co{sub 0.1} are greater than those of InTe. The higher conductivity is due to the higher carrier's density obtained from the interaction of the sp-d orbitals, of the electric and magnetic system. The presence of In{sub 4}Te{sub 3} minor phase and different kinds of defects are taking major roles in the formation of high Tc ferromagnetism and antiferromagnetism.

36 MATERIALS SCIENCE↗

Synthesis of magnetite-porphyrin nanocomposite and its application as a novel magnetic adsorbent for removing heavy cations

Graphical abstract: Magnetite-porphyrin nanocomposite (MPNC) as a novel magnetic adsorbent for removing heavy cations was synthesized. - Highlights: • Nanosized Fe{sub 3}O{sub 4} was prepared by hydrothermal reaction of iron salt in alkaline media. • The synthesized magnetite and nanocomposite had soft ferromagnetic property. • Magnetic nanocomposite as a novel magnetic adsorbent for heavy cations was prepared. • Satisfactory separation from solutions in the order of Pb{sup 2+} > Cd{sup 2+} > Hg{sup 2+} was obtained. - Abstract: Magnetite-porphyrin nanocomposite (MPNC) was synthesized as a novel magnetic adsorbent for removing heavy cations. Firstly, we prepared nano-sized magnetite using a simple hydrothermal route. The synthesis of nanoscaled magnetite was carried out through reaction between iron source and various amines. In this paper, we studied effective parameters in controlling shape and size of nanoscaled magnetite. These parameters were presence of alkaline, reaction time, kind of amine and iron salt. Morphology, particle size and magnetic properties of the nanoscaled magnetite were obtained by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier transform infrared (FT-IR), diffuse reflectance spectra (DRS) and vibrating sample magnetometer (VSM). Our study showed that the synthesized magnetite from reaction between FeSO{sub 4} and hydrazinum hydrate has spherical shape. The synthesized magnetite was a nanosized compound and used for preparation of magnetite-porphyrin nanocomposite. The synthesized magnetite-porphyrin hybrid material had magnetic property and was used as magnetic adsorbent for removing heavy cations of water. Satisfactory separation from solutions in the order of Pb{sup 2+} > Cd{sup 2+} > Hg{sup 2+} was obtained.

36 MATERIALS SCIENCE↗

Synthesis of NiCuZn-ferrite powders by means of mechanochemical treatment

Graphical abstract: The peak intensity for the product calcined at 500 °C is relatively weak, but it gradually increases with increasing the temperature. This implies that the temperature up to 700 °C leads to well crystallization of the spinel type of Ni{sub 0.45}Cu{sub 0.05}Zn{sub 0.5}Fe{sub 2}O{sub 4} phase. - Highlights: • NiCuZn-ferrite powders were obtained at a low temperature by mechanochemical activation. • The effects of the mechanical and thermal treatments on the mixtures were analyzed. • The mechanochemical method benefited achieving the lower M{sub s} and μ{sub i}. - Abstract: NiCuZn-ferrite powders were synthesized by mechanochemical treatments using NiCO{sub 3}⋅2Ni(OH){sub 2}⋅4H{sub 2}O, CuO, ZnO and Fe{sub 2}O{sub 3} as raw materials. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and vibrating sample magnetometer (VSM) were employed to evaluate the morphologies and structures of samples. The results indicated that the mechanochemical treatment produced several structural and chemical effects on reactants of the powder mixtures, and single phase Ni{sub 0.45}Cu{sub 0.05}Zn{sub 0.5}Fe{sub 2}O{sub 4} could be obtained after annealed at 700 °C for 2 h. In comparison with the traditional firing method, the mechanochemical method benefited achieving the lower M{sub s} and μ{sub i}, which indicated that the sample had better magnetic properties.

36 MATERIALS SCIENCE↗

Single source preparation of superparamagnetic Fe{sub 3}O{sub 4} nanoparticles by simple cyclic microwave approach

Graphical abstract: - Highlights: • Superparamagnetic Fe{sub 3}O{sub 4} nanoparticles were synthesized in high yield. • PEG-200 was applied as both solvent and reductive agent. • Single source synthesis of Fe{sub 3}O{sub 4} was performed. • Nontoxic materials and surfactant were used in current investigation. • Reaction time and temperature significantly decreased in current experiment. - Abstract: Polyol mediated process was applied for the synthesis of Fe{sub 3}O{sub 4} nanoparticles under microwave irradiation. By combination of polyol medium and microwave irradiation different advantages including low reaction time, low consumption of energy, and simplicity were achieved. Different parameters affecting on products including microwave irradiation power, reaction time, reactants concentration, and solvent were changed to reach the optimum condition for synthesis of Fe{sub 3}O{sub 4} nanoparticles. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), Fourier transform infrared (FT-IR) spectra, and vibrating sample magnetometer (VSM). Facile preparation and separation are important features of this route. This work has provided a general, simple, and effective method to control the composition and morphology of Fe{sub 3}O{sub 4} nanoparticles in nonaqueous solution, which will be important for inorganic synthesis methodology.

36 MATERIALS SCIENCE↗