Search NASA⌕ Search

SEARCH · Search NASA

Results for “Material Point Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Grain Boundary Engineering for Achieving High Thermoelectric Performance in n-Type Skutterudites

Grain or phase boundaries play a critical role in the carrier and phonon transport in bulk thermoelectric materials. Previous investigations about controlling boundaries primarily focused on the reducing grain size or forming nanoinclusions. Herein, liquid phase compaction method is first used to fabricate the Yb–filled CoSb 3 with excess Sb content, which shows the typical feature of low–angle grain boundaries with dense dislocation arrays. Seebeck coefficients show a dramatic increase via energy filtering effect through dislocation arrays with little deterioration on the carrier mobility, which significantly enhances the power factor over a broad temperature range with a high room–temperature value around 47 μW cm –2 K –1 . Simultaneously, the lattice thermal conductivity could be further suppressed via scattering phonons via dense dislocation scattering. As a result, the highest average figure of merit ZT of ≈1.08 from 300 to 850 K could be realized, comparable to the best reported result of single or triple–filled Skutterudites. Furthermore, this work clearly points out that low–angle grain boundaries fabricated by liquid phase compaction method could concurrently optimize the electrical and thermal transport properties leading to an obvious enhancement of both power factor and ZT .

36 MATERIALS SCIENCE↗

On the sol-gel synthesis and characterization of strontium ferrite ceramic material

Highlights: Black-Right-Pointing-Pointer Successful sol-gel preparation of cubic perovskite SrFeO{sub 3-{xi}} ({xi} {approx} 0.13) with a{sub o} = 3.862 Angstrom-Sign . Black-Right-Pointing-Pointer Reduces to orthorhombic SrFeO{sub 2.5} via Fe{sup 4+} {yields} Fe{sup 3+}conversion with a {approx} a{sub o}{radical}2, b {approx} 4a{sub o}, c {approx} a{sub o}{radical}2. Black-Right-Pointing-Pointer High stability and good oxygen permeation characteristics at 1000 Degree-Sign C. Black-Right-Pointing-Pointer Phase reversibility upon heating in oxygen ambient at elevated temperatures. -- Abstract: A simple oxalate based sol-gel process has been described to produce a highly stable anion deficient strontium ferrite for separation of oxygen from air. The method involves metal nitrates and oxalic acid precursors with ethanol and water as solvents, gel formation, digestion for 4 h, drying at 150 Degree-Sign C for 24 h, and finally decomposition at 800 Degree-Sign C in air. The resulting material (i) exhibits a single perovskite-type cubic (SrFeO{sub 3-{xi}}; {xi} {approx} 0.13) phase with a{sub o} = 3.862 {+-} 0.002 Angstrom-Sign , (ii) contains both the Fe{sup 4+} and Fe{sup 3+} species in 2.8:1 ratio, (iii) undergoes Fe{sup 4+} {yields} Fe{sup 3+} reduction upon heating at 650 Degree-Sign C in rare gas ambient and transition to an orthorhombic phase with a {approx} a{sub o}{radical}2, b {approx} 4a{sub o}, c {approx} a{sub o}{radical}2, which reverts back to cubic phase with oxygen uptake at elevated temperatures, and (iv) acts as filter for air with excellent oxygen permeation, typical flux density value being 2.45 ml/cm{sup 2} min at 1000 Degree-Sign C.

36 MATERIALS SCIENCE↗

Abstract for CRADA between NETL and the University of Massachusetts Lowell (AGMT-1275)

The demand for printed electronics over conventional electronics is growing each year due to their low costs, low material waste during manufacturing, and compatibility with flexible substrates. The development of inks for printed electronics is a challenge because each printing technology requires different viscosities and curing behaviors to create devices with controlled structures at the micron scale, or smaller. Carbon is a great candidate for fabricating printed electronics devices because it is inexpensive and earth abundant, easily functionalized to impart miscibility with solvent systems, and has electrical properties that can be tuned from insulating to conducting. Despite these advantages, carbons are rarely used for printed electronics because there is a scarcity of inks available for non-contact printing technologies. To address these challenges, the National Energy Technology Laboratory (NETL) will collaborate with the University of Massachusetts Lowell (Participant) through its Printed Electronics Research Collaborative (PERC) to develop engineered carbons and ink formulations optimized specifically for printing radio- and microwave-frequency electronic devices using ink jet, aerosol jet, syringe dispensing, and other additive manufacturing techniques. NETL will process coal, petroleum, and other carbon feedstocks to make engineered carbons with the appropriate composition, microstructure, surface functionalization, and particle morphologies needed to stabilize ink suspensions and impart useful electronic properties to printed devices. The University of Massachusetts Lowell will utilize these engineered carbons to determine which solvent systems and ink additives are needed to achieve the appropriate viscosity, stability, and printability to make useful ink formulations. The University of Massachusetts Lowell will then utilize these inks to manufacture printed resistors and conductors using inkjet, aerosol jet, and syringe dispensing printing methods and will characterize device performance using four-point probe resistivity measurements, contact angle measurements to assess wettability, adhesion evaluation to various substrates, and focused ion beam and scanning electron microscopy for surface and density investigations of printed devices.

36 MATERIALS SCIENCE↗

Phase Boundary Propagation in Li-Alloying Battery Electrodes Revealed by Liquid-Cell Transmission Electron Microscopy

Battery cycle life is directly influenced by the microstructural changes occurring in the electrodes during charge and discharge cycles. In this study, we image in situ the nanoscale phase evolution in negative electrode materials for Li-ion batteries using a fully enclosed liquid cell in a transmission electron microscope (TEM) to reveal early degradation that is not evident in the charge–discharge curves. To compare the electrochemical phase transformation behavior between three model materials, thin films of amorphous Si, crystalline Al, and crystalline Au were lithiated and delithiated at controlled rates while immersed in a commercial liquid electrolyte. This method allowed for the direct observation of lithiation mechanisms in nanoscale negative electrodes, revealing that a simplistic model of a surface-to-interior lithiation front is insufficient. For the crystalline films, a lithiation front spread laterally from a few initial nucleation points, with continued grain nucleation along the growing interface. The intermediate lithiated phases were identified using electron diffraction, and high-resolution postmortem imaging revealed the details of the final microstructure. Lastly, our results show that electrochemically induced solid–solid phase transformations can lead to highly concentrated stresses at the laterally propagating phase boundary which should be considered for future designs of nanostructured electrodes for Li-ion batteries.

25 ENERGY STORAGE↗

Observations of a dynamical-to-kinematic diffraction transition in plastically deformed polycrystalline intermetallic YCu

Unlike most intermetallic compounds, polycrystalline YCu, a B2 (CsCl-type) intermetallic, is ductile at room temperature. The mechanisms for this behavior are not fully understood. In situ neutron diffraction was used to investigate whether a stress-induced phase transformation or twinning contribute to the ductility; however, neither mechanism was found to be active in YCu. Surprisingly, this study revealed that the intensities of the diffraction peaks increased after plastic deformation. It is thought that annealing the samples created nearly perfect crystallinity, and subsequent deformation reduced this high degree of lattice coherency, resulting in a modified mosaic structure that decreased or eliminated the extinction effect. Analysis of changes in diffraction peak intensity showed a region of primary plasticity that exhibits significant changes in diffraction behavior. Fully annealed samples initially contain diffracting volumes large enough to follow the dynamical theory of diffraction. When loaded beyond the yield point, dislocation motion disrupts the lattice perfection, and the diffracting volume is reduced to the point that diffraction follows the kinematic theory of diffraction. Since the sample preparation and deformation mechanisms present in this study are common in numerous material systems, this dynamical to kinematic diffraction transition should also be considered in other diffraction experiments. These measurements also suggest the possibility of a new method of investigating structural characteristics. (C) 2014 Published by Elsevier Ltd. on behalf of Acta Materialia Inc.

36 MATERIALS SCIENCE↗

Oxygen vacancy diffusion in bulk SrTiO3 from density functional theory calculations

Point defects and point defect diffusion contribute significantly to the properties of perovskite materials. However, even for the prototypical case of oxygen vacancies in SrTiO 3 (STO), predictions vary widely. Here we present a comprehensive and systematic study of the diffusion barriers for this material. We use density functional theory (DFT) and assess the role of different cell sizes, density functionals, and charge states. Our results show that vacancy-induced octahedral rotations, which are limited by the boundary conditions of the supercell, can significantly affect the computed oxygen vacancy diffusion energy barrier. The diffusion energy barrier of a charged oxygen vacancy is lower than that of a neutral one. Unexpectedly, we find that with increasing supercell size, the effects of the oxygen vacancy charge state, the type of DFT exchange and correlation functional on the energy barrier diminish, and the different DFT predictions asymptote to a value in the range of 0.39-0.49 eV. This work provides important insight and guidance that should be considered for investigations of point defect diffusion in other perovskite materials and in oxide superlattices.

36 MATERIALS SCIENCE↗

A novel method to determine air leakage in heat pump clothes dryers

A heat pump clothes dryer offers the potential to save a significant amount of energy as compared with conventional vented electric dryers. Although heat pump clothes dryers (HPCD) offer higher energy efficiency; it has been observed that they are prone to air leakages, which inhibits the HPCD's gain in efficiency. This study serves to develop a novel method of quantifying leakage, and to determine specific leakage locations in the dryer drum and air circulation system. The basis of this method is the American Society of Testing and Materials (ASTM) standard E779 10, which is used to determine air leakage area in a household ventilation system through fan pressurization. This ASTM method is adapted to the dryer system, and the leakage area is determined by an analysis of the leakage volumetric flow - pressure relationship. Easily accessible leakage points were quantified: the front and back crease (in the dryer drum), the leakage in the dryer duct, the air filter, and the remaining leakage in the drum. The procedure allows investigators to determine major components contributing to leakage in HPCDs, thus improving component design features that result in more efficient HPCD systems.

42 ENGINEERING↗

Locally Advanced Rectal Cancer Patients Receiving Radio-Chemotherapy: A Novel Clinical-Pathologic Score Correlates With Global Outcome

Purpose: To determine the importance of downstaging of locally advanced rectal cancer after neoadjuvant treatment. Methods and Materials: The study included all consecutive patients with locally advanced rectal cancer who underwent neoadjuvant treatment (chemotherapy and/or radiotherapy) in different Italian centers from June 1996 to December 2003. A novel score was used, calculated as the sum of numbers obtained by giving a negative or positive point, respectively, to each degree of increase or decrease in clinical to pathologic T and N status. Results: A total of 317 patients were eligible for analysis. Neoadjuvant treatments performed were as follows: radiotherapy alone in 75 of 317 patients (23.7%), radiotherapy plus chemotherapy in 242 of 317 patients (76.3%). Worse disease-free survival was observed in patients with a lower score (Score 1 = -3 to +3 vs. Score 2 = +4 to +7; p = 0.04). Conclusions: Our results suggest that a novel score, calculated from preoperative and pathologic tumor and lymph node status, could represent an important parameter to predict outcome in patients receiving neoadjuvant treatment for rectal cancer. The score could be useful to select patients for adjuvant chemotherapy after neoadjuvant treatment and surgery.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Validation of a Score Predicting Post-Treatment Ambulatory Status After Radiotherapy for Metastatic Spinal Cord Compression

Purpose: A score predicting post-radiotherapy (RT) ambulatory status was developed based on 2,096 retrospectively evaluated metastatic spinal cord compression (MSCC) patients. This study aimed to validate the score in a prospective series. Methods and Materials: The score included five factors associated with post-RT ambulatory status: tumor type, interval tumor diagnosis to MSCC, visceral metastases, pre-RT motor function, time developing motor deficits. Patients were divided into five groups: 21-28, 29-31, 32-34, 35-37, 38-44 points. In this study, 653 prospectively followed patients were divided into the same groups. Furthermore, the number of prognostic groups was reduced from five to three (21-28, 29-37, 38-44 points). Post-RT ambulatory rates from this series were compared with the retrospective series. Additionally, this series was compared with 104 patients receiving decompressive surgery plus RT (41 laminectomy, 63 laminectomy plus stabilization of vertebrae). Results: In this study, post-RT ambulatory rates were 10.6% (21-28 points), 43.5% (29-31 points), 71.0% (32-34 points), 89.5% (35-37 points), and 98.5% (38-44 points). Ambulatory rates from the retrospective study were 6.2%, 43.5%, 70.0%, 86.1%, and 98.7%. After regrouping, ambulatory rates were 10.6% (21-28 points), 70.9% (29-37 points), and 98.5% (38-44 points) in this series, and 6.2%, 68.4%, and 98.7% in the retrospective series. Ambulatory rates were 0%, 62.5%, and 90.9% in the laminectomy plus RT group, and 14.3%, 83.9%, and 100% in the laminectomy + stabilization plus RT group. Conclusions: Ambulatory rates in the different groups in this study were similar to those in the retrospective study demonstrating the validity of the score. Using only three groups is simplier for clinical routine.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Patient-Specific Quality Assurance for Prostate Cancer Patients Receiving Spot Scanning Proton Therapy Using Single-Field Uniform Dose

Purpose: To describe our experiences with patient-specific quality assurance (QA) for patients with prostate cancer receiving spot scanning proton therapy (SSPT) using single-field uniform dose (SFUD). Methods and Materials: The first group of 249 patients with prostate cancer treated with SSPT using SFUD was included in this work. The scanning-beam planning target volume and number of monitor units were recorded and checked for consistency. Patient-specific dosimetric measurements were performed, including the point dose for each plan, depth doses, and two-dimensional (2D) dose distribution in the planes perpendicular to the incident beam direction for each field at multiple depths. The {gamma}-index with 3% dose or 3-mm distance agreement criteria was used to evaluate the 2D dose distributions. Results: We observed a linear relationship between the number of monitor units and scanning-beam planning target volume. The difference between the measured and calculated point doses (mean {+-} SD) was 0.0% {+-} 0.7% (range, -2.9% to 1.8%). In general, the depth doses exhibited good agreement except at the distal end of the spread-out Bragg peak. The pass rate of {gamma}-index (mean {+-} SD) for 2D dose comparison was 96.2% {+-} 2.6% (range, 90-100%). Discrepancies between the measured and calculated dose distributions primarily resulted from the limitation of the model used by the treatment planning system. Conclusions: We have established a patient-specific QA program for prostate cancer patients receiving SSPT using SFUD.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Synthesis and photocatalytic activity of mesoporous cerium doped TiO{sub 2} as visible light sensitive photocatalyst

Graphical abstract: Cerium doped titania having optimum 5 wt% of cerium can decompose methylene blue and reduce selenium (IV) efficiently under visible light. Highlights: Black-Right-Pointing-Pointer Effect of cerium doping on the surface properties and visible light mediated photocatalytic reaction is studied. Black-Right-Pointing-Pointer Cerium doping increases the anatase phase stability, surface area (up to 137 m{sup 2}/g) and visible light absorption. Black-Right-Pointing-Pointer Importance of Ce{sup 3+}/Ce{sup 4+}, oxygen vacancy, surface area and crystallinity is correlated with improved catalytic activity. Black-Right-Pointing-Pointer Material with 5 wt% Ce is found to be most active photocatalyst for methylene blue decomposition and Se (IV) reduction. -- Abstract: Cerium doped titania materials were synthesized varying the cerium concentration from 0 to 10 wt%. Materials are characterised by XRD, TEM, XPS and N{sub 2} adsorption desorption method. Surface area and visible light absorption substantially increases and crystallite size decreases with the increasing cerium content. Cerium doping stabilizes the anatase phase and surface area even at 600 Degree-Sign C calcination. Photocatalytic activity towards methylene blue decomposition and selenium (IV) reduction is found to increase with the cerium content up to 5 wt% and then decreases. Materials calcined at 600 Degree-Sign C shows better activity than that calcined at 400 Degree-Sign C, even though surface area decreases. Anatase crystallinity mostly decides the photocatalytic activity rather than only surface area. It can be concluded that the optimum visible light absorption and oxygen vacancy with 5% cerium doping enhances the photocatalytic activity. In addition photocatalytic performance is found to depend on the presence of Ce{sup 4+}/Ce{sup 3+} rather than only visible light absorption.

36 MATERIALS SCIENCE↗

Localized Radial Basis Functions for Radiation Transport in Slab Geometry

Meshing the spatial domain for the neutron transport equation can be computationally expensive and labor-intensive. Mesh-free methods, such as radial basis function (RBF) approximations, may alleviate these concerns by using a pointwise solution of the transport equation instead of the standard volume-integrated solution using cells or elements. This allows for the use of any geometric description that can provide the material at solution points and the boundary normal directions for boundary points. RBFs give spectral convergence when used to solve differential equations, but only if they are infinitely smooth. This occurs when the RBFs are effectively flat, creating an ill-conditioned, dense system of equations. One simple way to alleviate this issue is to use localized RBFs. Global RBFs have been applied previously to the monoenergetic radiative transport equation in X-Y geometry using source iteration. In this summary, localized RBFs are applied to the multigroup neutron transport equation in slab geometry using Krylov iteration. The results show agreement with benchmark solutions, provided the coefficients for the RBF basis are properly chosen. (authors)

97 MATHEMATICS AND COMPUTING↗

VOLTAGE DISTRIBUTION AND MECHANICAL STRENGTH IN SPLICE JOINTS MADE FROM AS-MANUFACTURED YBCO COATED CONDUCTORS

With recommendations from wire manufacturers as a starting point, a series of solder joints were fabricated and characterized to determine the best method to produce repeatable, low-resistance and high-mechanical-strength splices in as-manufactured, stabilized YBCO coated conductors. From the 2.54 cm long splice joints that were fabricated, parameters such as solder material, stabilization material, fabrication method, and conductor geometry were varied to determine the impact of each on splice joint properties. Results indicate that the lowest resistance splice joints were influenced primarily by the tape orientation in the joint and the stabilization material. The lowest resistances were between 2 10-8 and 1.0 10-7 in 4-mm wide tapes and were obtained from pure copper stabilized tapes oriented with the YBCO layers in closest proximity. The voltage drop along the splice length indicated that only a fraction of the splice length contributes to the splice joint resistance. Mechanical characterization of splice joints showed that the joint resistance remained unchanged under axial stress up to a stress level at which the critical current of the tapes forming the joint degrades irreversibly.

36 MATERIALS SCIENCE↗

A multiscale microstructural approach to ductile-phase toughened tungsten for plasma-facing materials

Increasing fracture toughness and decreasing the ductile-brittle transition temperature of a tungsten-alloy has been shown to be feasible by ductile-phase toughening of tungsten. In this method, a ductile phase is included in a brittle tungsten matrix to prevent fracture propagation by crack bridging or crack deflection. This paper models the deformation behavior of ductile phase toughened tungsten materials such as tungsten-copper composites using a multiscale modeling approach that involves a microstructural dual-phase (copper-tungsten) region of interest where the constituent phases are finely discretized and are described by a continuum damage mechanics model. Large deformation, damage and fracture are allowed to occur and are modeled in this region that is connected to the adjacent homogenized elastic regions to form a macroscopic structure such as a test specimen. This paper illustrates such a multiscale modeling approach to analyze un-notched and single-edge notched (SENB) tungsten-copper composite specimens subjected to three-point bending. The predicted load-displacement responses and crack propagation patterns are compared to the corresponding experimental results to validate the model.

Nguyen, Ba Nghiep↗

Factors governing Yb magnetism in Yb{sub 0.95}PtIn{sub 2} and other MgCuAl{sub 2}-type structures

The ternary compound 'YbPtIn{sub 2}' has been synthesized and its crystal structure determined using single crystal X-ray diffraction techniques. The compound crystallizes in the MgCuAl{sub 2} structure, a ternary structure type often formed when rare earth metals, Group 10 transition metals, and indium are present in a 1:1:2 ratio. The unit cell is C-centered orthorhombic, space group Cmcm (no. 63) with lattice parameters of a=4.3410(1) A, b=10.3230(2) A, and c=7.8510(2) A. Evidence is found for a substantial non-stoichiometry on the Yb site, in contrast to the Pt and In sites which behave as expected, and it is believed that the stoichiometry of this compound is more properly described as Yb{sub 0.95}PtIn{sub 2}. Magnetic and resistivity measurements reveal that 'YbPtIn{sub 2}' is a weakly interacting, non-magnetic metal exclusively containing Yb{sup 2+}, and with a resistivity ({rho}) varying from 34 {mu}{Omega} cm at room temperature to a residual resistivity {rho}{sub 0} of 23 {mu}{Omega} cm at 1.8 K. Density functional theory calculations suggest that the observed diamagnetic Yb behavior is expected for this compound, but that certain substitutions on the Pt or In site could help stabilize magnetic Yb{sup 3+} and potentially induce heavy fermion behavior. - Graphical abstract: The crystal structure, magnetic behavior, and temperature-dependent resistivity of the new ternary compound Yb{sub 0.95}PtIn{sub 2.} Highlights: Black-Right-Pointing-Pointer Flux growth method used to produce Yb{sub 0.95}PtIn{sub 2} single crystals. Black-Right-Pointing-Pointer Found rare example of non-stoichiometry in a MgCuAl{sub 2}-type structure. Black-Right-Pointing-Pointer The resistivity and diamagnetic response of Yb{sub 0.95}PtIn{sub 2} were modeled. Black-Right-Pointing-Pointer DFT correctly predicts presence of Yb{sup 2+} in Yb{sub 0.95}PtIn{sub 2}. Black-Right-Pointing-Pointer COHP results suggest other MgCuAl{sub 2}-type indides that may contain paramagnetic Yb{sup 3+}.

36 MATERIALS SCIENCE↗

Calcium-decorated graphyne nanotubes as promising hydrogen storage media: A first-principles study

First principles calculations based on density functional theory are carried out to study the hydrogen storage properties of Ca-decorated graphyne nanotubes. The results show that Ca atoms can be adsorbed stably on the acetylenic ring of the graphyne nanotube (GNT) without Ca atom clustering. Both the polar interactions and the orbital hybridizations contribute to the adsorption of H{sub 2} molecules. The average adsorption energy is in the range of 0.13-0.33 eV/H{sub 2} which is almost independent of the tube diameter. Each Ca atom can adsorb up to four H{sub 2} molecules due to the steric hindrance of the H{sub 2} molecules. With a hydrogen uptake of 7.44-8.96 wt%, the Ca-decorated GNT is an optimal choice for hydrogen recycling at near ambient conditions. - Graphical abstract: 2D contour of charge density of Ca decorated GNT2 and the side view of Ca decorated GNT2 with full loaded H{sub 2} molecules. Highlights: Black-Right-Pointing-Pointer Ca decorated graphyne nanotubes as hydrogen storage media. Black-Right-Pointing-Pointer The gravimetric density of H{sub 2} is 7.44-8.96 wt%. Black-Right-Pointing-Pointer The average adsorption energy of hydrogen molecule is 0.13-0.33 eV/H{sub 2}. Black-Right-Pointing-Pointer It can operate under ambient thermodynamic conditions.

36 MATERIALS SCIENCE↗

First-principles study on phase transition and ferroelectricity in lithium niobate and tantalate

The phase transitions and ferroelectricity of LiNbO{sub 3} and LiTaO{sub 3} have been investigated theoretically from first principles. The phonon analyses and the molecular dynamics simulations revealed that the ferroelectric phase transition is not conventional displacive type but order-disorder type with strong correlation between cation displacements. According to the evaluated potential energy surfaces around the paraelectric structures, the large difference in ferroelectricity between the two oxides results from the little difference in short-range interionic interaction between Nb-O and Ta-O. As the results of the crystal orbital overlap population analyses, the different short-range interaction originates from the difference in covalency between Nb4d-O2p and Ta5d-O2p orbitals, particularly d{sub xz}-p{sub x}/d{sub yz}-p{sub y} orbitals (π orbitals), from the electronic point of view.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Determination of heat conductivity and thermal diffusivity of waste glass melter feed: Extension to high temperatures

The heat conductivity ({lambda}) and the thermal diffusivity (a) of reacting glass batch, or melter feed, control the heat flux into and within the cold cap, a layer of reacting material floating on the pool of molten glass in an all-electric continuous waste glass melter. After previously estimating {lambda} of melter feed at temperatures up to 680 deg C, we focus in this work on the {lambda}(T) function at T > 680 deg C, at which the feed material becomes foamy. We used a customized experimental setup consisting of a large cylindrical crucible with an assembly of thermocouples, which monitored the evolution of the temperature field while the crucible with feed was heated at a constant rate from room temperature up to 1100°C. Approximating measured temperature profiles by polynomial functions, we used the heat transfer equation to estimate the {lambda}(T) approximation function, which we subsequently optimized using the finite-volume method combined with least-squares analysis. The heat conductivity increased as the temperature increased until the feed began to expand into foam, at which point the conductivity dropped. It began to increase again as the foam turned into a bubble-free glass melt. We discuss the implications of this behavior for the mathematical modeling of the cold cap.

36 MATERIALS SCIENCE↗