Search NASA⌕ Search

SEARCH · Search NASA

Results for “Microstructural properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Microstructure and Mechanical Properties of B{sub 4}C-Blended M3:2 High-Speed Steel Powders Consolidated by Sintering and Heat Treatment

Water-atomized powders of M3:2 high-speed steel (HSS) were blended with B{sub 4}C and consolidated by cold press sintering. With the addition of B{sub 4}C (~ 0.2 vol.%), satisfactory mechanical properties were achieved for HSS by sintering at a temperature as low as 1190 °C [e.g., 53.2 ± 0.2 in the Rockwell hardness (HRC) and 3074 ± 56 MPa in bending strength]. High relative density (98.5%) and good strength were attributed to the mechanism described as follows: First, the atoms of boron and carbon escaped after the reaction between B{sub 4}C and iron matrix. Then, the sintered HSS was strengthened by boron atoms while they were distributed in M{sub 6}C or MC carbides and iron matrix. Second, a plenty of M{sub 6}C carbides were formed due to the release of carbon atoms. As a result, the value of solidus temperature was reduced. In addition, mechanical properties were greatly improved by heat treatment (quenching and tempering) (e.g., 61.2 ± 0.3 in HRC, 4356 ± 64 MPa in bending strength, and 42.3 ± 0.5 MPa m{sup 1/2} in fracture toughness, respectively).

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Rolling Temperature on the Microstructure and Mechanical Properties of AZ31 Alloy Sheet Processed through Variable-Plane Rolling

AZ31 magnesium alloy sheet was produced through variable-plane rolling (VPRing) under different temperatures, and a conventional rolled AZ31 alloy was investigated for comparison. A basal texture was formed during these two processes. The texture intensity was closely related to dynamic recrystallization and deformation mechanism. Four types of twins appeared, namely {10-12} extension twins, {10-13} and {10-11} contraction twins and {10-11}-{10-12} double twins. High rolling temperature and rolling plane alteration were beneficial for activating {10-11}-{10-12} double twins. The tensile strengths revealed a declining trend with elevated rolling temperatures. The AZ31 alloy rolled at 573 K showed advantageous combination with a high yield strength of 286 MPa and compromised elongation of 5%. The mechanical anisotropy of VPRed AZ31 sheet decreased with nearly similar yield strengths along the roll direction (RD), transverse direction and 45° away from the RD. The VPRing process improved the rollability and strength of Mg alloy and reduced its mechanical anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Effect of Delta Ferrite on Microstructure and Mechanical Properties of High-Chromium Martensitic Steel

The fusion zone of modified 9Cr-1Mo steel experiencing a peak temperature of 1450 °C and varying cooling rates between 1 and 40 °C/s from the peak temperature is simulated using Gleeble thermal simulator. Mechanical properties of the simulated samples are assessed by ball indentation and impression creep tests. The study evaluates the effect of cooling rate on volume fraction, morphology of retained delta ferrite in the simulated partially melted zone of an autogenous weld, and subsequently its effect on the mechanical properties of this zone. With varying cooling rate, volume fraction of delta ferrite does not change much; however, its morphology changes from polygonal island to grain boundary network in case of excessive slow cooling (1 °C/s). Morphological variation of delta ferrite affects the creep properties of this zone. Partially melted zone, which is cooled at 1 °C/s with delta ferrite present in the interdendritic regions, exhibits maximum creep strain and creep strain rate.

36 MATERIALS SCIENCE↗
DOE OSTI2012

Microstructure and thermoelectric properties of CoSb 2.75 Ge 0.25-x Te x prepared by rapid solidification

Since the vibration modes of the pnicogen rings in CoSb3-based skutterudites fall within the range of frequencies of heat-carrying phonons, disruption of the rings by doping should have a strong influence on heat transport in this material. To test the premise, single-phase double-doped CoSb 2.75 Ge 0.25-x Te x x (x = 0.125–0.20) compounds were synthesized by combining melt spinning with a spark plasma sintering method. Following the melt-spinning process, the side of the ribbons contacting the copper drum is featureless and reflects its amorphous nature while the free surface of the ribbons is composed of 30–80 nm grains. After spark plasma processing the average grain size of the bulk samples is about 200 nm. High-resolution transmission electron microscopy images show an in situ nanostructure consisting of circular, 15 nm diameter dots of Te- and Ge-enriched skutterudite phase embedded in the skutterudite matrix. Transport properties were measured from 2 to 800 K as a function of Te and Ge content on the pnicogen (Sb) rings and the results were correlated with the structural data. Double-doping on pnicogen rings with Ge and Te, and using melt-spinning processing, results in binary skutterudite compounds that possess an impressive figure of merit of ZT ~ 1.1 at 750 K.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The hydration, microstructure, and mechanical properties of vaterite calcined clay cement (VC 3 )

Limestone (calcite) calcined clay cement (LC 3 ) is a promising low-CO 2 binder, but the low activity of calcite cannot compensate the reduction in clinker factor, resulting in low one-day strength and limiting its broad applications. As recent carbon capture and utilization technologies allow scalable production of vaterite, a more reactive CaCO 3 polymorph, we overcome the challenge by introducing vaterite calcined clay cement (VC 3 ), inspired by the vaterite-calcite phase change. In the present study, VC 3 exhibits higher compressive strengths and faster hydration than LC 3 . Compared to hydrated LC 3 , hydrated VC 3 exhibits increased amount of hemi- and mono-carboaluminate formation and decreased amount of strätlingite formation. With gypsum adjustment, the 1-day strength of VC 3 is higher than that of pure cement reference. Finally, VC 3 , a low-CO 2 binder, presents great potential as a host of the metastable CaCO 3 for carbon storage and utilization and as an enabler of carbon capture at gigaton scales.

36 MATERIALS SCIENCE↗