Search NASA⌕ Search

SEARCH · Search NASA

Results for “Modifications”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Significant enhancement of magnetocaloric effect in a NiMnCuGa Heusler alloy through textural modification

Magnetocaloric materials are of increasing interest to bring magnetic refrigeration to everyday households and drastically impact the energy demands for temperature control devices. In this work, a polycrystalline Heusler alloy of composition Ni2Mn0.76Cu0.24Ga with coinciding structural and magnetic transformation temperatures was subjected to compressive stress assisted thermal cycling (SATC) to enhance the magnetic properties by inducing a preferred orientation in the martensite. Isofield magnetization measurements showed a sharpening of the transformation between ferromagnetic martensite and paramagnetic austenite due to SATC. In isothermal magnetization measurements, SATC was seen to increase the magnetostructural coupling. With a 2 T applied magnetic field, the magnetocaloric effect (MCE) increased from ∼10 to ∼25 J/kg K and the refrigeration capacity (RC) almost doubled due to SATC. Heat capacity measurements were largely unaffected by SATC. The change in adiabatic temperature was estimated by using Cp and change in magnetic entropy (ΔSM) calculations. SATC was seen to increase ΔTad from ∼1.2 K to 2 K for an applied magnetic field of 2 T. Neutron diffraction measurements revealed highly textured martensite in the as received state that rotated to a more ideal preferred orientation after SATC that enhanced the magnetostructural transformation; and thus, improving the MCE and ΔTad.

McLeod, M. V. (ORCID:0000000329883516)↗
DOE OSTI2020

Modification of terahertz emission spectrum using microfabricated spintronic emitters

Terahertz (THz) radiation with sub-millimeter wavelength falls in the gap between optical and radio frequencies. Conventional THz emitters do not intertwine with spin degrees of freedom. However, it was recently shown that broadband THz radiation can be efficiently created also by exploiting spin-based effects on ultrafast time scales. Here, we demonstrate the generation and control of THz radiation from microstructured spintronic THz emitters based on the inverse spin-Hall effect. Using time-domain THz spectroscopy, we compare the THz spectra of different stripe patterns made of Fe/Pt bilayers with a spectrum obtained from an extended Fe/Pt bilayer film. It is found that the THz spectrum can be altered by a proper choice of the microstructure dimensions. The experimentally observed spectra are interpreted in terms of a simplified multi-slit interference model, which captures the main experimental features. Our results pave the way for an efficient control of THz light emitted from magnetic heterostructures. This is a crucial step forward for the design and realization of directional THz sources.

Wu, Weipeng↗
DOE OSTI2021

Ultrafast thermal modification of strong coupling in an organic microcavity

There is growing interest in using strongly coupled organic microcavities to tune molecular dynamics, including the electronic and vibrational properties of molecules. However, very little attention has been paid to the utility of cavity polaritons as sensors for out-of-equilibrium phenomena, including thermal excitations. Here, we demonstrate that non-resonant infrared excitation of an organic microcavity system induces a transient response in the visible spectral range near the cavity polariton resonances. We show how these optical responses can be understood in terms of ultrafast heating of electrons in the metal cavity mirror, which modifies the effective refractive index and subsequently the strong coupling conditions. The temporal dynamics of the microcavity are strictly determined by carriers in the metal, including the cooling of electrons via electron–phonon coupling and excitation of propagating coherent acoustic modes in the lattice. We rule out multiphoton excitation processes and verify that no real polariton population exists despite their strong transient features. These results suggest the cavity polaritons to be promising as sensitive probes of non-equilibrium phenomena.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modeling the spectral modification of lower hybrid wave in the presence of drift-wave type density fluctuation in the scrape-off-layer of the EAST tokamak

In this work, the spectrum change of the lower hybrid (LH) waves caused by a low-frequency density fluctuation in the scrape-off-layer is studied by applying the wave scattering model developed by Bonoli and Ott [Phys. Fluids 25, 359 (1982)] via a Monte Carlo method. A ray-tracing model specific to this purpose is developed to evaluate the probability distribution of both the poloidal refractive index (N θ ) and the parallel refractive index (N ∥ ) of the LH wave at the last closed flux surface (LCFS).The probability distributions of N ∥ and N θ at the LCFS are studied using the EAST parameters as a function of wave frequency, the initial N ∥ , and the polar injection position, which may influence the lower hybrid current drive efficiency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

The National Spherical Torus Experiment-Upgrade poloidal high-k scattering system pitch angle design modifications

A 693 GHz, eight-channel, poloidal high-k (k refers to wavenumber) collective scattering system is under development for the National Spherical Torus Experiment-Upgrade device. It will replace the previous 280 GHz, five-channel, tangential scattering system to study high-k electron density fluctuations, thereby providing a measurement of the k θ -spectrum of both electron temperature gradient and ion temperature gradient modes. A tool is under development to calculate the wavenumber that exists in the presence of strong magnetic pitch angles. Here we use this tool to motivate a new receiver optical design for significantly improved performance, details of which are presented herein.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Modification of Lie's transform perturbation theory for charged particle motion in a magnetic field

It is pointed out that the conventional Lie transform perturbation theory for the guiding center motion of charged particles in a magnetic field needs to be modified for ordering inconsistency. There are two reasons. First, the ordering difference between the temporal variation of gyrophase and that of the other phase space coordinates needs to be taken into account. Second, it is also important to note that the parametric limit of the derivative of a function is not equivalent to the derivative of the limit function. When these facts are taken into account, the near identity transformation rule for one form related to the Lagrangian is modified. With the modified near identity transformation rule, the drift motion of charged particles can be described in the first order, instead of the second order and beyond through a tedious expansion process as in the conventional formulation. Here, this resolves the discrepancy between the direct and Lie transform treatments in the Lagrangian perturbation theory for charged particle motion in a magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Long-term relaxation of orientational disorder and structural modifications in molecular nitrogen at high pressure

Up to 17 GPa, the crystalline phases of N 2 are characterized by pronounced orientational disorder, whereas the higher-pressure phases of molecular N 2 are ordered. This raises the question about long-term relaxation of orientational disorder within the low- to intermediate-pressure regime. Here, in this study, this question is addressed by comparing synthetic with natural, chemically pure, solid N 2 that resides as inclusions in diamonds at 300 K for about 10 8 years at pressures up to 11 GPa. It is shown that disorder prevails at 8.7 GPa, 300 K, where both synthetic and natural N 2 assume the same structure. However, at 10.8 GPa, natural solid N 2 exhibits monoclinic distortion and partial orientational ordering of the molecules, both of which are not observed in synthetic material. This difference is interpreted as the result of long-term structural relaxation. The ordering mechanism is examined and placed into the context of the δ- to ε-N 2 transition. We present explanations for the absence of complete ordering of δ-N 2 .

Tschauner, Oliver↗
DOE OSTI2024

Pressure induced modification of electronic and magnetic properties of MnCrNbAl and MnCrTaAl

Spin-gapless semiconductor (SGS) is a new class of material that has been studied recently for potential applications in spintronics. This material behaves as an insulator for one spin channel, and as a gapless semiconductor for the opposite spin. In this work, we present results of a computational study of two quaternary Heusler alloys, MnCrNbAl and MnCrTaAl that have been recently reported to exhibit spin-gapless semiconducting electronic structure. In particular, using density functional calculations we analyze the effect of external pressure on electronic and magnetic properties of these compounds. It is shown that while these two alloys exhibit nearly SGS behavior at optimal lattice constants and at negative pressure (expansion), they are half-metals at equilibrium, and magnetic semiconductors at larger lattice constant. At the same time, reduction of the unit cell volume has a detrimental effect on electronic properties of these materials, by modifying the exchange splitting of their electronic structure and ultimately destroying their half-metallic/semiconducting behavior. Thus, our results indicate that both MnCrNbAl and MnCrTaAl may be attractive for practical device applications in spin-based electronics, but a potential compression of the unit cell volume (e.g. in thin-film applications) should be avoided.

Materials Science↗
DOE OSTI2021

Near-surface modification of defective KTaO 3 by ionizing ion irradiation

The synergistic effect of nuclear (S n ) and electronic (S e ) energy loss observed in some ABO 3 perovskites has attracted considerable attention due to the real possibility to modify various near-surface properties, such as the electronic and optical properties, by patterning ion tracks in the defective near-surface regions. In this study, we show that low-energy ion-induced disordering in conjunction with ionizing ion irradiation (18 MeV Si, 21 MeV Ni and 91.6 MeV Xe) is a promising approach for tailoring ion tracks in the near-surface of defective KTaO 3 . Experimental characterization and computer simulations reveal that the size of these latent ion tracks increases with S e and level of pre-existing damage. These results further reveal that the threshold S e value (S e th ) for track creation increases with decreasing pre-damage level. The values of S e th increase from 5.02 keV nm -1 , for a pre-existing fractional disorder of 0.53 in KTaO 3 , to 10.81 keV nm -1 for pristine KTaO 3 . Above these thresholds, amorphous latent tracks are produced due local melting and rapid quenching. Below a disorder fraction of 0.08 and S e ≤ 6.68 keV nm -1 , the synergistic effect is not active, and damage accumulation is suppressed due to a competing ionization-induced damage annealing process. These results indicate that, depending on S e and the amount of pre-existing damage, highly ionizing ions can either enhance or suppress damage accumulation in KTaO 3 , thus providing a pathway to tailoring defects states. Comprehending the conflicting roles of highly ionizing ions in defective ABO 3 oxides is vital for understanding and predictive modeling of ion-solid interactions in complex oxides, as well as for achieving control over ion track size in the near-surface of defective KTaO 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tuning of the electronic and vibrational properties of epitaxial MoS 2 through He-ion beam modification

Abstract Atomically thin transition metal dichalcogenides (TMDs), like MoS 2 with high carrier mobilities and tunable electron dispersions, are unique active material candidates for next generation opto-electronic devices. Previous studies on ion irradiation show great potential applications when applied to two-dimensional (2D) materials, yet have been limited to micron size exfoliated flakes or smaller. To demonstrate the scalability of this method for industrial applications, we report the application of relatively low power (50 keV) 4 He + ion irradiation towards tuning the optoelectronic properties of an epitaxially grown continuous film of MoS 2 at the wafer scale, and demonstrate that precise manipulation of atomistic defects can be achieved in TMD films using ion implanters. The effect of 4 He + ion fluence on the PL and Raman signatures of the irradiated film provides new insights into the type and concentration of defects formed in the MoS 2 lattice, which are quantified through ion beam analysis. PL and Raman spectroscopy indicate that point defects are generated without causing disruption to the underlying lattice structure of the 2D films and hence, this technique can prove to be an effective way to achieve defect-mediated control over the opto-electronic properties of MoS 2 and other 2D materials.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Modification of favorable average curvature effect by changing parallel sound wave behavior in tokamak plasmas

Abstract The favorable average curvature effect, also known as the GGJ effect (Glasser et al 1975 Phys. Fluids 18 875), is intrinsically associated with parallel sound wave propagation in a tokamak plasma. This work investigates how the GGJ effect is modified by changing the parallel sound wave behavior. Two physics models beyond the standard single fluid theory, i.e. an anisotropic thermal transport model and a parallel sound wave damping model, are employed to change parallel sound waves in a toroidal plasma, and the consequence on the GGJ effect is demonstrated for two important classes of problems, i.e. the resistive plasma response to the applied resonant magnetic perturbation and the stability of the tearing mode. Toroidal modeling reveals that the GGJ effect is significantly altered by both of the aforementioned physics effects. Compared to the thermal transport physics, which completely removes the GGJ effect, the sound wave damping effect only offers partial mitigation. The differences between these two models are further illustrated in terms of the radial structure of the shielding current and the eigenfunction of the tearing instability. In particular, a fundamental reason for complete suppression of the GGJ effect by the thermal transport is identified as an extra toroidal coupling of the poloidal harmonics.

Physics↗
DOE OSTI2022

Real-time wall conditioning and recycling modification utilizing boron and boron nitride powder injections into the Large Helical Device

Controlled particulate injections from the PPPL impurity powder dropper (IPD) into the Large Helical Device have demonstrated positive effects on the wall conditions on both an intra and inter-shot basis. Here injections over a range of densities, input powers, pulse lengths, heating schemes, injection quantities and main ion species show conclusive evidence of improvement to plasma wall conditions. Successful injections are confirmed by both spectroscopic measurements as well as real-time visible camera signals. In 7 s long plasmas the responses include a reduction in wall recycling as well as a reduction in native impurity content as observed over the course of several discharges. For plasmas longer than 40 s, improvements to the recycling rate and increased impurity control are observed in real time as a consequence of the extended particulate injections. These experiments demonstrate the extended applicability of this solid particulate conditioning technique to the control and maintenance of the plasma wall conditions. In addition they are an important initial step in the development of the real-time boronization technique as a supplement to standard conditioning scenarios.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Modification in Applying Appendix D of 40 CFR Part 61 to Heated Solid Radionuclide Materials With High Melting and Boiling Points

Appendix D of Title 40 Part 61 of the US Code of Federal Regulations (CFR) provides a procedure that US Department of Energy (US DOE) facility owners and operators can use to estimate radionuclide emissions to the atmosphere for dose calculations instead of measuring emissions for minor sources under the 40 CFR Part 61, Subpart H, National Emission Standards for Emissions of Radionuclides Other Than Radon From Department of Energy Facilities, regulation. The procedure assumes that any radioactive material heated above 100 °C is completely vaporized and emitted to the atmosphere. In 1991, the US DOE Oak Ridge Reservation (ORR) requested approval to use different release fractions (RFs) for uranium because of its high melting and boiling points. In response to the request, the US Environmental Protection Agency (US EPA) Region IV approved the use of modified RFs for elemental uranium provided no reaction had taken place to alter its chemical form. In 2015, the ORR requested approval to use different RFs for tungsten, again because of its high melting and boiling points. EPA Region IV approved the use of modified RFs for heated radioactive tungsten metal. In accordance with the two precedents set for heating uranium and radioactive tungsten metals, in 2016, the ORR requested approval to use modified RFs in a similar fashion for other radioactive solid metals and compounds with melting and boiling points above 500 °C that might be heated above 100 °C in future research projects and experiments. EPA Region IV again granted approval to use modified RFs for the list of compounds. This note discusses the proposed modified RFs and their development.

36 MATERIALS SCIENCE↗
DOE OSTI2021

An evolutionary algorithm for designing microbial communities via environmental modification

Despite a growing understanding of how environmental composition affects microbial communities, it remains difficult to apply this knowledge to the rational design of synthetic multispecies consortia. This is because natural microbial communities can harbour thousands of different organisms and environmental substrates, making up a vast combinatorial space that precludes exhaustive experimental testing and computational prediction. Here, we present a method based on the combination of machine learning and metabolic modelling that selects optimal environmental compositions to produce target community phenotypes. In this framework, dynamic flux balance analysis is used to model the growth of a community in candidate environments. A genetic algorithm is then used to evaluate the behaviour of the community relative to a target phenotype, and subsequently adjust the environment to allow the organisms to approach this target. We apply this iterative process to thousands of in silico communities of varying sizes, showing how it can rapidly identify environments that yield desired taxonomic compositions and patterns of metabolic exchange. Moreover, this combination of approaches produces testable predictions for the assembly of experimental microbial communities with specific properties and can facilitate rational environmental design processes for complex microbiomes.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Magnetic field induced modification of a first-order ferromagnetic transition in Eu 2 ⁢In

Here, we present a comprehensive study of the temperature-and magnetic-field-dependent magnetization, specific heat, and local crystal structure across the first-order ferromagnetic–paramagnetic transition in Eu 2 ⁢In. Anomalies in the magnetocaloric response are observed near 𝐻 ≈ 25 kOe, including changes in field scaling of magnetic entropy, local entropy exponent, and universal master curve, which suggest an apparent weakening of the first-order character of the transition. However, quantitative analysis of the magnetocaloric parameters together with modified Arrott plots demonstrates that the transition remains first order up to at least 70 kOe. Specific-heat measurements reveal a field-induced splitting of the sharp zero-field anomaly into a doublet, providing a natural explanation for the change in the magnetocaloric response. Magnetic-field-dependent extended x-ray absorption fine structure (EXAFS) measurements show no detectable field-induced changes in the local coordination environment of Eu. We therefore attribute these observations to a magnetic-field-induced two-step transition process in Eu 2 ⁢In.

Kumar, Ajay [Ames Laboratory (AMES), Ames, IA (Uni↗