Search NASA⌕ Search

SEARCH · Search NASA

Results for “Motion Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Propagation and attenuation of sound in one-dimensional quantum liquids

At low temperatures, elementary excitations of a one-dimensional quantum liquid form a gas that can move as a whole with respect to the center of mass of the system. This internal motion attenuates at exponentially long time scales. As a result, in a broad range of frequencies, the liquid is described by two-fluid hydrodynamics, and the system supports two sound modes. The physical nature of the two sounds depends on whether the particles forming the quantum liquid have a spin degree of freedom. For particles with spin, the modes are analogous to the first and second sound modes in superfluid 4 He, which are the waves of density and entropy, respectively. When dissipative processes are taken into account, we find that at low frequencies, the second sound is transformed into heat diffusion, while the first sound mode remains weakly damped and becomes the ordinary sound. In a spinless liquid, the entropy and density oscillations are strongly coupled and the resulting sound modes are hybrids of the first and second sound. As the frequency is lowered and dissipation processes become important, the crossover to a single-fluid regime occurs in two steps. First the hybrid modes transform into predominantly density and entropy waves, similar to the first and second sound, and then the density wave transforms to the ordinary sound and the entropy wave becomes a heat-diffusion mode. Lastly, we account for the dissipation due to viscosity and intrinsic thermal conductivity of the gas of excitations, which controls attenuation of the sound modes at high frequencies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomic-resolution lithography with an on-chip scanning tunneling microscope

In this work, atomic-resolution lithography with a Microelectromechanical-System (MEMS) based Scanning Tunneling Microscope (STM) is demonstrated for the first time. The microscope consists of a commercial UltraHigh-Vacuum (UHV) STM whose regular tip is replaced with a 1-Degree-of-Freedom (1-DOF) MEMS nanopositioner. This results in a hybrid STM system where XY-plane motions are provided by the piezotube of the original system and Z-axis motion by the MEMS with a higher bandwidth. Sharp tips made of Pt or W are added to the MEMS devices with postfabrication techniques. With this hybrid system, STM-based lithography is demonstrated on an H-passivated Si (100)-2×1 sample under UHV condition. Results prove the capability of the hybrid STM system for atomic-scale lithography. This capability, paired with the small footprint of the MEMS device, makes this approach a candidate for building a high-throughput parallel STM lithography platform by incorporating an array of 1-DOF MEMS devices that perform lithography in parallel.

Alipour, Afshin (ORCID:0000000263252067)↗

Linear and non-linear dynamic models of a geared rotor-bearing system

A three degree of freedom non-linear model of a geared rotor-bearing system with gear backlash and radial clearances in rolling element bearings is proposed here. This reduced order model can be used to describe the transverse-torsional motion of the system. It is justified by comparing the eigen solutions yielded by corresponding linear model with the finite element method results. Nature of nonlinearities in bearings is examined and two approximate nonlinear stiffness functions are proposed. These approximate bearing models are verified by comparing their frequency responses with the results given by the exact form of nonlinearity. The proposed nonlinear dynamic model of the geared rotor-bearing system can be used to investigate the dynamic behavior and chaos.

Kahraman, Ahmet↗

A variational approach to dynamics of flexible multibody systems

This paper presents a variational formulation of constrained dynamics of flexible multibody systems, using a vector-variational calculus approach. Body reference frames are used to define global position and orientation of individual bodies in the system, located and oriented by position of its origin and Euler parameters, respectively. Small strain linear elastic deformation of individual components, relative to their body references frames, is defined by linear combinations of deformation modes that are induced by constraint reaction forces and normal modes of vibration. A library of kinematic couplings between flexible and/or rigid bodies is defined and analyzed. Variational equations of motion for multibody systems are obtained and reduced to mixed differential-algebraic equations of motion. A space structure that must deform during deployment is analyzed, to illustrate use of the methods developed.

Wu, Shih-Chin↗

A quantum dissipative system in an anisotropic non-linear absorbing environment

A canonical quantization scheme is represented for a quantum system interacting with a non-linear absorbing environment. The environment is taken anisotropic and the main system is coupled to its environment through some coupling tensors of various ranks. The non-linear response equation of the environment against the motion of the main system is obtained. The non-linear Langevin-Schroedinger equation is concluded as the macroscopic equation of motion of the dissipative system. The effect of non-linearity of the environment is investigated on the spontaneous emission of an initially excited two-level atom imbedded in such an environment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of non-ideal boundary conditions on natural frequencies of fluid conveying micro-beams

In this study, vibrations of fluid conveying micro-beams under non-ideal boundary conditions are investigated. Non-ideal boundary conditions are modeled as a linear combination of ideal clamped and ideal simply supported boundary conditions. The weighting factor k is presented as a rate of non-ideal boundary condition. Non-ideal clamped and non-ideal simply supported beams are both considered to see the effects of the boundary conditions. Hamilton’s principle is used to obtain equations of motion of the system and the method of multiple scales which is one of the perturbation techniques is applied to the equation. Approximate solutions of the linear and nonlinear equations of motion are obtained and the effects of non-ideal boundary conditions on natural frequencies are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

MODELING MULTI-WAVELENGTH STELLAR ASTROMETRY. III. DETERMINATION OF THE ABSOLUTE MASSES OF EXOPLANETS AND THEIR HOST STARS

Astrometric measurements of stellar systems are becoming significantly more precise and common, with many ground- and space-based instruments and missions approaching 1 {mu}as precision. We examine the multi-wavelength astrometric orbits of exoplanetary systems via both analytical formulae and numerical modeling. Exoplanets have a combination of reflected and thermally emitted light that causes the photocenter of the system to shift increasingly farther away from the host star with increasing wavelength. We find that, if observed at long enough wavelengths, the planet can dominate the astrometric motion of the system, and thus it is possible to directly measure the orbits of both the planet and star, and thus directly determine the physical masses of the star and planet, using multi-wavelength astrometry. In general, this technique works best for, though is certainly not limited to, systems that have large, high-mass stars and large, low-mass planets, which is a unique parameter space not covered by other exoplanet characterization techniques. Exoplanets that happen to transit their host star present unique cases where the physical radii of the planet and star can be directly determined via astrometry alone. Planetary albedos and day-night contrast ratios may also be probed via this technique due to the unique signature they impart on the observed astrometric orbits. We develop a tool to examine the prospects for near-term detection of this effect, and give examples of some exoplanets that appear to be good targets for detection in the K to N infrared observing bands, if the required precision can be achieved.

79 ASTRONOMY AND ASTROPHYSICS↗

Critical exponent of a quantum-noise-driven phase transition: The open-system Dicke model

The quantum phase transition of the Dicke model has been observed recently in a system formed by motional excitations of a laser-driven Bose-Einstein condensate coupled to an optical cavity [Baumann et al., Nature (London) 464, 1301 (2010)]. The cavity-based system is intrinsically open: photons leak out of the cavity where they are detected. Even at zero temperature, the continuous weak measurement of the photon number leads to an irreversible dynamics toward a steady state. In the framework of a generalized Bogoliubov theory, we show that the steady state exhibits a dynamical quantum phase transition. We find that the critical point and the mean field are only slightly modified with respect to the phase transition in the ground state. However, the critical exponents of the singular quantum correlations are significantly different in the two cases. There is also a drastic modification of the atom-field entanglement, since the divergence of the logarithmic negativity of the ground state at the critical point is suppressed and a finite entanglement is found in the steady state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulation Studies of Intra-Train, Bunch-by-Bunch Feedback Systems at the International Linear Collider

The International Linear Collider (ILC) is a proposed electron-positron collider targeting collision energies from 250 GeV to 1 TeV. With design luminosities of order 10³⁴ cm²s⁻¹, a beam-based, intra-train feedback system would be required near the Interaction Point (IP) to provide nanometre-level stabilisation of the beam overlap in the collisions. Here we present results from beam-tracking simulations of the 500 GeV ILC, including the impact of beam-trajectory imperfections on the luminosity, and the capability of the IP feedback system to compensate for them. Effects investigated include the position jitter introduced by the damping ring extraction kicker, short-range and long-range wakefields, and ground motion. The feedback system was shown to be able to correct for beam-beam offsets of up to 200 nm and stabilise the collision overlap to the nanometre level, within a few bunch crossings.

Ramjiawan, R. L.↗

Transient response of rotor-bearing systems.

The equations of motion necessary to calculate the transient response of a multimass flexible rotor supported by nonlinear, damped bearings are derived from energy principles. Rotor excitation may be the result of imbalance, internal friction, rotor acceleration, nonlinear forces due to any number of bearing or seal stations, and gyroscopic couples developed from skewed disk effects. The method of solution for transient response simulation is discussed in detail and is based on extensive evaluation of numerical methods available for transient analysis. Examples of the application of transient response for the analysis of rotor bearing systems are presented and compared to actual machine performance. Recommendations for the use and extension of the present system simulation model are discussed.

Kirk, R. G.↗

Anisotropic responses to motion toward and away from the eye

When a rigid object moves toward the eye, it is usually perceived as being rigid. However, in the case of motion away from the eye, the motion and structure of the object are perceived nonveridically, with the percept tending to reflect the nonrigid transformations that are present in the retinal image. This difference in response to motion to and from the observer was quantified in an experiment using wire-frame computer-generated boxes which moved toward and away from the eye. Two theoretical systems are developed by which uniform three-dimensional velocity can be recovered from an expansion pattern of nonuniform velocity vectors. It is proposed that the human visual system uses two similar systems for processing motion in depth. The mechanism used for motion away from the eye produces perceptual errors because it is not suited to objects with a depth component.

Perrone, John A.↗

Fluid flow in solidifying monotectic alloys

Use of a two-wavelength holographic technique results in a simultaneous determination of temperature and composition profiles during directional solidification in a system with a miscibility gap. The relationships among fluid flow, phase separation, and mass transport during the solidification of the monotectic alloy are discussed. The primary sources of fluid motion in this system are buoyancy and thermocapillary forces. These forces act together when phase separation results in the formation of droplets (this occurs at the solid-liquid interface and in the bulk melt). In the absence of phase separation, buoyancy results from density gradients related to temperature and compositional gradients in the single-phase bulk melt. The effects of buoyancy are especially evident in association with water- or ethanol-rich volumes created at the solid-liquid growth interface.

Ecker, A.↗

Hybrid Hydraulic-Electric Architecture (HHEA) for Mobile Machines (Final Report)

Traditionally, off-road mobile machines such as excavators and wheel loaders are primarily powered by hydraulics, and throttling valves are used to control their work circuits. In recent years, two general trends are towards more energy efficient systems and electrification. With electrification, both efficiency and control performance can be improved by the elimination of throttling losses and the use of high-bandwidth inverter control. Electrification is generally accomplished with Electro-hydraulic actuators (EHA) but they are limited to lower powered systems due to the high cost of electric machines capable of high power or high torque. This project proposes a new system architecture for off-road vehicles - Hybrid Hydraulic Electric Architecture (HHEA) to improve efficiency and control performance without requiring large electric machines. The widely applicable architecture combines hydraulic power and electric power in such a way that the majority of power is provided hydraulically while electric drives are used to modulate this power. In particular, HHEA utilizes multiple common pressure rails to transmit the majority of power and small electric machines to modulate the power. The energy-saving potential of the the HHEA has been validated for the work circuits of a variety of mobile machines, from small 5-ton excavators to medium sized 20-ton excavators and wheel loaders, and representative duty cycles to reduce energy input by 50-80% compared to the commercial state-of-art load-sensing systems. In addition, the corner power requirements of the electrical machines can be downsized by 85% compared to the EHA approach. Various tradeoff studies have also been conducted, including sensitivities to individual components performances, controllers, accumulator sizes, and variations of the system architecture etc. A control strategy has been developed to maintain or exceed the motion control precision compared to current systems. The motion control strategy consists of a nominal controller, based on a passivity-based backstepping design, and a transition controller, based on least-norn feedforward design. The nominal controller is used in between common pressure rail switches whereas the transition controller compensates for any disturbance that common pressure rail switchings inflict on the system. The control strategy has been experimentally validated on both a medium pressure (200bar) hardware-in-the-loop (HIL) testbed and a high pressure (300+bar) HIL testbed. An efficient and power-dense integrated electric-hydraulic machine consisting of an axial flux electric machine and a radial hydrostatic piston hydraulic machine has been designed, constructed and tested. The machine has an active material power density of 6.1kW/kg, a rated speed of 12500 RPM, and a design efficiency of 85%. This is among the highest power density electric machines using conventional materials. While the integrated machine was designed for modulating the hydraulic power within the HHEA, it can also be used in other applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗

THE CLUSTER AGES EXPERIMENT (CASE). V. ANALYSIS OF THREE ECLIPSING BINARIES IN THE GLOBULAR CLUSTER M4

We use photometric and spectroscopic observations of the eclipsing binaries V65, V66, and V69 in the field of the globular cluster M4 to derive masses, radii, and luminosities of their components. The orbital periods of these systems are 2.29, 8.11, and 48.19 days, respectively. The measured masses of the primary and secondary components (M{sub p} and M{sub s} ) are 0.8035 {+-} 0.0086 and 0.6050 {+-} 0.0044 M{sub Sun} for V65, 0.7842 {+-} 0.0045 and 0.7443 {+-} 0.0042 M{sub Sun} for V66, and 0.7665 {+-} 0.0053 and 0.7278 {+-} 0/0048 M{sub Sun} for V69. The measured radii (R{sub p} and R{sub s} ) are 1.147 {+-} 0.010 and 0.6110 {+-} 0.0092 R{sub Sun} for V66, 0.9347 {+-} 0.0048 and 0.8298 {+-} 0.0053 R{sub Sun} for V66, and 0.8655 {+-} 0.0097 and 0.8074 {+-} 0.0080 R{sub Sun} for V69. The orbits of V65 and V66 are circular, whereas that of V69 has an eccentricity of 0.38. Based on systemic velocities and relative proper motions, we show that all three systems are members of the cluster. We find that the distance to M4 is 1.82 {+-} 0.04 kpc-in good agreement with recent estimates based on entirely different methods. We compare the absolute parameters of V66 and V69 with two sets of theoretical isochrones in mass-radius and mass-luminosity diagrams, and for assumed [Fe/H] = -1.20, [{alpha}/Fe] = 0.4, and Y = 0.25 we find the most probable age of M4 to be between 11.2 and 11.3 Gyr. Color-magnitude diagram (CMD) fitting with the same parameters yields an age close to, or slightly in excess of, 12 Gyr. However, considering the sources of uncertainty involved in CMD fitting, these two methods of age determination are not discrepant. Age and distance determinations can be further improved when infrared eclipse photometry is obtained.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental Demonstration of the Henon-Heiles Quasi-Integrable System at IOTA

The Integrable Optics Test Accelerator is a research electron and proton storage ring recently commissioned at the Fermilab Accelerator Science and Technology facility. Its research program is focused on testing novel techniques for improving beam stability and quality, notably the concept of non-linear integrable optics. In this paper, we report the first results of experimental investigation of a quasi-integrable transverse focusing system with one invariant of motion, a Henon-Heiles type system implemented with octupole magnets. Good agreement with simulations is demonstrated on key parameters of achievable tune spread and dynamic aperture preservation. Resilience to perturbations and imperfections in the lattice is explored. We conclude by outlining future research plans and discussing applicability to future high intensity accelerators.

43 PARTICLE ACCELERATORS↗

Experimental Studies of Single Invariant Quasi-Integrable Nonlinear Optics at IOTA

The Integrable Optics Test Accelerator is a research electron and proton storage ring recently commissioned at the Fermilab Accelerator Science and Technology facility. Its research program is focused on testing novel techniques for improving beam stability and quality, notably the concept of non-linear integrable optics. In this paper, we report on run 1 results of experimental studies of a quasi-integrable transverse focusing system with one invariant of motion, a Henon-Heiles type system implemented with octupole magnets. Good agreement with simulations is demonstrated on key parameters of achievable tune spread, dynamic aperture, and invariant conservation. We also outline current simulation and hardware improvement efforts for run 2, planned for fall of 2019.

43 PARTICLE ACCELERATORS↗

Optical holography applications for the zero-g Atmospheric Cloud Physics Laboratory

A complete description of holography is provided, both for the time-dependent case of moving scene holography and for the time-independent case of stationary holography. Further, a specific holographic arrangement for application to the detection of particle size distribution in an atmospheric simulation cloud chamber. In this chamber particle growth rate is investigated; therefore, the proposed holographic system must capture continuous particle motion in real time. Such a system is described.

Kurtz, R. L.↗