Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multiphysics simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

(Invited) Virtual Analysis of Gas-Diffusion-Electrode CO 2 Electrolyzers

The electrochemical reduction of CO 2 (CO 2 R) to value-added products is an attractive technology for tackling the rising atmospheric CO 2 levels and storing intermittent renewable energy into chemical bonds. Fundamental understanding of CO 2 R has progressed significantly in recent years and is critical in the development of CO 2 R to liquid-fuel electrolyzers, where gas-diffusion electrodes (GDEs) have been shown to be key enabling architectures. Various designs have been proposed and studied in the literature to enhance overall selectivity, rates, and maximize the conversion of CO 2 , the latter of which is only now being recognized as a critical issue. In this respect, there is a need to explore the governing phenomena inherent in these architectures to enable optimization. Mathematical modeling is ideally suited to tackle and explore these multiphysics interactions and provide virtual design analysis. In this talk, we discuss modeling methodologies and physics inherent in these devices and present our recent modeling of GDEs for CO 2 reduction. We specifically examine the impacts of multiphase flow and related phenomena on overall cell performance. We then explore the performance and limitations of various cell designs guided by simulation results and examine potential methods for improving water management and tuning catalyst selectivity including the use of different anion-exchange and bipolar membranes. Finally, we discuss the disparities in local environments between aqueous and GDE devices and propose strategies to reduce the gap in knowledge between the two systems.

42 ENGINEERING↗
DOE OSTI2019

Transient and Steady-State Inverse Problems in Sierra/Aria

Inverse problems arise in a wide range of applications, whenever unknown model parameters cannot be measured directly. Instead, the unknown parameters are estimated using experimental data and forward simulations. Thermal inverse problems, such as material characterization problems, are often large-scale and transient. Therefore, they require intrusive adjoint-based gradient implementations in order to be solved efficiently. The capability to solve large-scale transient thermal inverse problems using an adjoint-based approach was recently implemented in SNL Sierra Mechanics, a massively parallel capable multiphysics code suite. This report outlines the theory, optimization formulation, and path taken to implement thermal inverse capabilities in Sierra within a unit test framework. The capability utilizes Sierra/Aria and Sierra/Fuego data structures, the Rapid Optimization Library, and an interface to the Sierra/InverseOpt library. The existing Sierra/Aria time integrator is leveraged to implement a time-dependent adjoint solver.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Virtual Analysis of Gas-Diffusion-Electrode CO 2 Electrolyzers

The electrochemical reduction of CO 2 (CO2R) to value-added products is an attractive technology for tackling the rising atmospheric CO 2 levels and storing intermittent renewable energy into chemical bonds. Fundamental understanding of CO 2 R has progressed significantly in recent years and is critical in the development of CO 2 R to liquid-fuel electrolyzers, where gas-diffusion electrodes (GDEs) have been shown to be key enabling architectures. Various designs have been proposed and studied in the literature to enhance overall selectivity, rates, and maximize the conversion of CO 2 , the latter of which is only now being recognized as a critical issue. In this respect, there is a need to explore the governing phenomena inherent in these architectures to enable optimization. Mathematical modeling is ideally suited to tackle and explore these multiphysics interactions and provide virtual design analysis. In this talk, we discuss modeling methodologies and physics inherent in these devices and present our recent modeling of GDEs for CO 2 reduction. Here, we specifically examine the impacts of multiphase flow and related phenomena on overall cell performance. We then explore the performance and limitations of various cell designs guided by simulation results and examine potential methods for improving water management and tuning catalyst selectivity including the use of different anion-exchange and bipolar membranes. Finally, we discuss the disparities in local environments between aqueous and GDE devices and propose strategies to reduce the gap in knowledge between the two systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Meshfree Multiphysics Damage Modeling of Li-ion Battery Materials

Through repeated charging and discharging cycles, the electrodes of a Li-ion battery experience significant swelling and contraction due to the movement of lithium, also known as intercalation. This research focuses specifically on the chemo-mechanical cracking in the cathode. Because cathode particles are comprised of many randomly-oriented grains, which have highly anisotropic material properties, the expansion and contraction is very non-uniform. As a result, stress concentrations tend to form between grains, which necessitates the modeling of crack propagation largely along grain boundaries and material interfaces. Chemo-mechanical damage models are generally simulated by one of two methods: the cohesive zone model (CZM) and the continuous damage model (CDM). The CZM is more accurate at capturing the sharp discontinuities of a crack but is very computationally expensive and intractable for large-scale models as a result. Conversely, the CDM is easily computed but not well-suited to easily allow for discontinuous field variables, which are inherent across a crack. This study aims to improve the CDM's ability to capture discontinuous cracks. Current versions of the CDM use the finite element method (FEM), which is one of the most widely used approaches for spatial discretization. This research investigates the use of the Reproducing Kernel Particle Method (RKPM), a meshfree method, for spatial discretization and aims to achieve a coupled chemo-mechanical crack propagation model that enhances accuracy while maintaining high computational efficiency. This model features a fully coupled, iterative electrochemistry solution, which informs the meshfree damage model of impending crack formation. To gain a better understanding of how the meshfree model compares to the current FEM model in capturing cathode crack propagation, further investigation is needed.

damage modeling↗
DOE OSTI2020

Demonstration of a new unstructured mesh IMC x-ray transport capability in LAP codes

In this document, the Advanced Simulation and Computing (ASC) Transport Project’s Jayenne team presents evidence that the Los Alamos National Laboratory (LANL) Level 2 milestone statement, Demonstrate a new unstructured mesh IMC x-ray transport capability in LAP codes, due Q4 FY20, has been satisfied with the release and integration of the Jayenne team’s Implicit Monte Carlo (IMC) solver libraries into the lumos multiphysics solver. The Jayenne project’s software includes the algorithms and features prescribed by the milestone description. The lumos software is maintained by the Lagrangian Applications Project (LAP) along with the hydrodynamics code flag and operates under the same ASC program as Jayenne. A set of demonstration problems has been specified, executed, and analyzed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Automated Control for Nuclear Thermal Propulsion Start-Up using MOOSE-based Applications

This report presents a Griffin/Bison/RELAP-7 numerical model of a prototypical NTP system that features fuel assemblies arranged in rings, and which was designed to simulate rapid startup transients. The physics modeled include full-core neutronics, assembly-wise heat conduction, and conjugate heat transfer, with the balance of plant mainly imposed through boundary conditions. In addition, various forms of automated reactivity control were deployed by using the MOOSE to autonomously drive the model and simulate the reactor transitioning from assumed initial conditions to nominal power in a fraction of a minute. To generate the cross-sections of the neutronics model, and in an effort to simultaneously account for the tremendous axial temperature gradients in the reactor and to limit the number of state points required for cross-section generation, the average component temperatures and hydrogen densities in the cooling channels were correlated to the average fuel and moderator temperatures, and fixed axial profiles were derived for nominal conditions and then used during the transient. With this approximation, a tractable cross-section library tabulated with fuel/moderator temperatures and CD angles was generated using Serpent. The full-core SPH correction procedure and the CD decusping technology in Griffin, respectively, ensure preservation of the multiplication factor and reaction rates at state points, along with a reasonably accurate reactivity worth between tabulated CD angles, despite using a coarse mesh. Feedback from other physics was calculated by modeling one representative fuel assembly per ring, along with the corresponding fuel and moderator cooling channels. To limit power overshoots during startup, another layer of multiphysics coupling was added to the model in order to automatically control the drums. Two different technologies presented herein showed outstanding performance in this regard: (1) a novel hybrid PID controller based on both power and reactivity signals, and (2) a PGC that relies on kinetics parameters and reactivity coefficients to predict future behavior and adjust the desired signal accordingly. A challenging benchmark was devised, featuring a power demand curve that exponentially increases by a factor of 500 within 30 seconds, then levels out after that. Both control approaches create a simulated power curve that closely follows the power demand curve and limits power overshoots to 1% or less. While the former approach requires more tuning of the internal parameters, the latter requires additional knowledge of the reactivity feedback coefficients and rates of change of the corresponding variables, including fuel and moderator temperature, which could be difficult to dynamically measure for a real NTP system. Fortunately, some inaccuracy in these quantities will not drastically degrade the PGC performance. Subsequently, a more realistic startup sequence was considered, in which the mass flow rate and outlet pressures are ramped up to model bootstrap and thrust build-up phases prior to reaching steady-state conditions, demonstrating the ability of the hybrid PID and PGCs to handle such transients, with both types of controllers exhibiting very similar behavior. Nevertheless, a significant chamber temperature overshoot was observed, caused by the demanded power signal and assumed mass flow rate. This issue could be mitigated by deploying a reactor controller that follows the chamber temperature signal and actuates both the control valves and drums (rather than using a power signal based solely on the drums to control reactivity). Enhancement of the hydrogen fluid properties available in MOOSE, as well as a better understanding of prototypical initial conditions, are also needed to further enhance this startup model. Finally, a study was performed to model decay heat post-shutdown, and to prepare for extending this model to predict shutdown behavior and post-shutdown pulsed cooling requirements.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

A Fundamentally New Coupled Approach to Contact Mechanics via the Dirichlet‐Neumann Schwarz Alternating Method

Contact phenomena are crucial for understanding the behavior of mechanical systems. However, existing computational approaches for simulating mechanical contact often face numerical challenges, such as inaccurate physical predictions, energy conservation errors, and unwanted oscillations. Here, we introduce an alternative technique for simulating dynamic contact based on the non‐overlapping Schwarz alternating method, originally developed for domain decomposition. In multibody contact scenarios, this method treats each body as a separate, non‐overlapping domain and prevents interpenetration using an alternating Dirichlet–Neumann iterative process. This approach has a strong theoretical foundation, eliminates the need for contact constraints, and offers flexibility, making it ideal for multiscale and multiphysics applications. We conducted a numerical comparison between the Schwarz method and traditional methods, such as the Lagrange multiplier and penalty methods, focusing on a benchmark impact problem. Our results indicate that the Schwarz alternating method outperforms traditional methods in several key areas: it provides more accurate predictions for various measurable quantities and demonstrates exceptional energy conservation capabilities. To address unwanted oscillations in contact velocities and forces, we explored various algorithms and stabilization techniques, ultimately opting for the naïve‐stabilized Newmark scheme for its simplicity and effectiveness. Additionally, we validated the efficiency of the Schwarz method in a three‐dimensional impact problem, highlighting its inherent capacity to accommodate different mesh topologies, time‐integration schemes, and time steps for each interacting body.

Schwarz alternating method↗
DOE OSTI2021

Serpent and MCNP Calculations of the Energy Deposition in the Transformational Challenge Reactor

This paper focuses on the calculation of the energy deposition in the Transformational Challenge Reactor by two major Monte Carlo codes: Serpent and MCNP. The first software computation relies on Kinetic Energy Released per unit Mass (KERMA) factors while the second one relies on Q-values. The results from these two independent computation methodologies are in very good agreement; however, Serpent runs much faster than MCNP (for the same computational model) and allows for a detailed energy deposition distribution from a 1-mm-side square mesh with a relative statistical error between 0.5% and 1%. This detailed energy deposition is suitable for multiphysics analyses aimed at design optimizations. In order to calculate the energy deposition, Serpent needs enhanced ACE files (distributed by the software developers). Unlike other Monte Carlo software that uses inputs based on Python or Java languages, the Serpent input syntax is very similar to that of MCNP; a Python script can convert a MCNP input to a Serpent input in seconds. For simulations not requiring the calculation of the energy deposition, Serpent can also read nuclear data from MCNP ACE files, which eventually improves the comparison of the results of the two codes.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Experimental and numerical study on the impacts of various long carbon fiber inserts on the thermal performance of phase change materials

In thermal energy storage systems, phase change materials (PCMs) are widely used to provide efficient storing and extraction of thermal energy. However, most PCMs have low thermal conductivities, which limit the heat transfer of the latent energy inward/outward. In this study, the impacts of various fiber inserts on the solidification and melting processes with PCM were investigated by experiments and simulations. It was found that long anisotropic carbon fibers with high thermal conductivities can not only increase the heat transfer within PCM by enlarging hot-cold interface areas, but also act as crystallization nuclei and increase the solidification of PCM during the charging process. Recalescence of PCM during solidification was observed. COMSOL models were used to understand the thermal transfer mechanisms. COMSOL Multiphysics models of a single carbon fiber filament in PCM showed that the anisotropy in thermal conductivities controlled the radial and axial heat transfer ratios along its fiber axis and can enhance both the solidification and melting processes.

Zhou, Xinzhang↗
DOE OSTI2024

Image-Based Digital Twin for Assessing the Coupled Electro-Chemo-Mechanical Behavior of Li-Ion Batteries

In energy storage materials, strong electrochemical-mechanical coupling and highly anisotropic material properties contribute to the formation and propagation of micro-cracking during charge/discharge cycling, resulting in reduced performance and service life. In this work, a digital twin is created to investigate the performance of a Li-ion battery cathode and simulate degradation accumulation. Pixel-based model construction is used to represent the complex material geometries from microstructural images supplied by the National Renewable Energy Laboratory (NREL). Because of the expected large deformation and crack opening, the reproducing kernel particle method (RKPM), a meshfree method with discretization at the image pixels, is used to approximate the field variables: electrostatic potential, concentration, and displacement. An interface modified reproducing kernel (IM-RK) is constructed by scaling a smooth kernel function with an interface-distance function to achieve strategic discontinuity types (i.e. weak discontinuities for strain discontinuities and strong discontinuities for cracks) and alleviate Gibbs oscillations near these transition zones. The discrete nature of the images' pixel points is employed throughout the model and approximation construction. The mechanical model is verified using an image-based microstructure under tensile loading. A transient electro-chemo-mechanical coupled simulation is performed to evaluate the potential micro-cracking induced degradation of the battery cathode material subjected to charge/discharge cycling.

battery degradation↗
DOE OSTI2019

Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics

Laser-induced keyholing occurs in additive manufacturing and welding processes, but the keyhole dynamics have not been well understood. A multiphase and multiphysics numerical model is used to predict the keyhole shapes recorded in the experimental observations and to predict transient and nonuniform distributions of laser absorption, temperature, and flow velocity in the process. When compared against data from a state-of-the-art dynamic x-ray radiography technique, good agreement is found for the keyhole shapes and fluctuation of the gas-liquid interface, thereby validating the simulation method. A detailed discussion is then given to elucidate the effects of laser absorption on the dynamic behavior of the front and rear keyhole walls. In conclusion, a quantitative comparison of different driving forces on the keyhole is also given to evaluate their significance to the keyhole dynamics.

42 ENGINEERING↗
DOE OSTI2024

INL Poster - Juan Barrera Salazar

Generation IV nuclear reactors introduce several advantages and benefits in terms of safety and efficiency when compared with their predecessors from previous generation. This is due, among many things, to the use of innovative forms of fuel and coolant, different from the conventional ones used in the last decades. Given that these upcoming designs utilize emerging technologies, the related instrumentation is also in the process of being developed; therefore, it is necessary to establish the sensitivity requirements and the effects of uncertainty on different properties of the components and elements of the reactor designs. This report presents the results of simulations that quantify the impacts of the uncertainties of four thermophysical properties of the refrigerant salt (LiF-BeF2) for the Kairos Power benchmark model (g-FHR) for steady state making use of the Sobol’ method through polynomial chaos surrogate modeling. The properties of the salt to which uncertainty was evaluated were density, dynamic viscosity, thermal conductivity and heat capacity. This study was carried out using the Griffin/Pronghorn multiphysics model under the computational resources of the Idaho National Laboratory (INL) High Performance Computing (HPC). The results indicate a weak dependence of the uncertainty of thermal conductivity on the quantities of core pressure drop and core outlet temperature.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
DOE OSTI2022

The Influence of Environment on Post-Detonation Chemistry and Debris Formation (Abbreviated Final Report: 20-SI-006)

Predicting, responding to, or interpreting the chemical record preserved in debris derived from nuclear events can be challenging due to chemical fractionation. Chemical fractionation is where different species of the evolving radionuclide inventory segregate and/or are lost from the system over the timescales of debris formation. Both historic data and recent research suggest that the interaction and character of the local environment may exert controls on chemical fractionation by influencing the cooling and evolution of the associated fireball as well as the composition of the vapor term and resultant speciation. Prior to this work, an integrated platform permitting dynamic and concurrent consideration of physical and chemical evolution of early time post-detonation event environments did not exist. Our work merged historic data and experimental approaches to support development of a computational framework able to simulate fundamental processes (e.g., entrainment of local environment, oxidation chemistry, and cooling time scales) that may perturb the radionuclide inventory captured in post-detonation debris. Work with historic debris confirmed that entrained environmental material affect debris composition, structure, and radionuclide incorporation. Complementary work utilizing a readily controllable and tunable benchtop setup (a plasma flow reactor) simulated the late cooling of a nuclear fireball (e.g., T < 6000 K) and bounded the sensitivity of actinide speciation and particle size distribution to variations in oxygen concentration and cooling rates. Concurrent laser ablation and laser heating experiments were used to investigate the chemistry and physics of processes occurring in vaporized and/or rapidly heated actinides and other elements in the presence of oxygen. A more computationally efficient microphysical model was developed for predicting and evolving size distributions of particles forming from mixed vapor terms and simulating particle formation processes under a variety of extreme conditions. Continued study of historic nuclear event film confirmed that shockwave data and physics codes agree to within the uncertainty of the data. Good agreement was achieved for thermal emission from an airburst, however the paucity of low-temperature molecular opacity data for mixtures of air, bomb debris, entrained dirt, and water vapor complicate agreement for more elaborate scenarios. A multiphysics code (ALE3D) was modified to bring the necessary physics and chemistry, including these new data and insights, onto a single platform. Code development included improved initialization of large physical systems, modernization of chemistry capabilities, and modifications to enable inclusion of particle transport.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2026

On the uncertainties in helium generation predictions for fission and fusion alloys

With ongoing advances in fusion and advanced fission reactors, quantifying irradiation effects in materials is critical. Transmutation-induced helium in cladding and structural materials can drive swelling and embrittlement, thereby reducing these components’ lifespans. Yet most studies ignore the considerable uncertainties in predicting helium generation rates. In this work, we created a code wrapper, F-SCATTER, that automatically performs simulations in FISPACT-II. We used this tool to investigate potential variance in helium generation rate, or He/dpa, calculations based on deviations in alloy composition, irradiating neutron flux spectrum, computational methodology, and nuclear data sources. We used 12 wt% Cr HT9 steel as the reference case and observed a 6.5%–98.3% He/dpa spread based on compositional variation within a single chemical specification, a 1.8%–11.5% He/dpa variation upon the incorporation of a 15% artificial uncertainty in flux at each energy, and a He/dpa difference as high as 231% when using ENDF/B-VIII.0 versus TENDL-2021 data libraries. Similar results were found for other prominent iron-based alloys, including Grade 91, castable nano-structured alloy, and 316H—where additional variations exist based on reactor type (e.g. thermal, fast, or fusion) and alloying elements such as carbon, nitrogen, and nickel. Based on the simulated results, we conclude that a significant part of the heat-to-heat variability in swelling responses of Fe-based alloys can be driven by impurity content in alloy compositions, and, therefore, chemical control should be a key element in supply chain design for advanced nuclear energy systems. Furthermore, we provide critical recommendations on best practices for evaluating and reporting helium production and lattice damage rates when computing predictions with multiphysics programs such as FISPACT-II.

FISPACT-II↗
NASA NTRS2006

Analysis of a Cylindrical Specimen Heated by an Impinging Hot Hydrogen Jet

A computational conjugate heat transfer methodology was developed, as a first step towards an efficient and accurate multiphysics, thermo-fluid computational methodology to predict environments for hypothetical solid-core, nuclear thermal engine thrust chamber and components. A solid conduction heat transfer procedure was implemented onto a pressure-based, multidimensional, finite-volume, turbulent, chemically reacting, thermally radiating, and unstructured grid computational fluid dynamics formulation. The conjugate heat transfer of a cylindrical material specimen heated by an impinging hot hydrogen jet inside an enclosed test fixture was simulated and analyzed. The solid conduction heat transfer procedure was anchored with a standard solid heat transfer code. Transient analyses were then performed with ,variable thermal conductivities representing three composites of a material utilized as flow element in a legacy engine test. It was found that material thermal conductivity strongly influences the transient heat conduction characteristics. In addition, it was observed that high thermal gradient occur inside the cylindrical specimen during an impulsive or a 10 s ramp start sequence, but not during steady-state operations.

Wang, Ten-See↗
DOE OSTI2021

Thermal-striping analysis methodology for sodium-cooled reactor design

Computational fluid dynamics simulations have been performed to study the applicability of engineering CFD methods for thermals striping analysis. Thermal striping is the fluctuating temperature profile in a solid caused by fluctuating fluid temperature, and the resulting fluctuating thermal stresses cause high cycle fatigue and eventual material failure. Here this study presents the methodology for thermal striping analysis that including a transient conjugate heat transfer RANS model and benchmark the results against a sodium triple jet experiment. The multiphysics calculations are implemented to analyze the thermal stresses in the solid domain caused by the coupled heat transfer between the fluid and solid domains. Validation data from a liquid sodium triple jet experiment include time-averaged temperature measurements and power spectra of the temperature signal. The numerical results agree well with these experimental measures, demonstrating key features such as the dominant frequency of temperature fluctuations. The applicability of a low-cost wall treatment method is demonstrated, enabling key computational savings. Finally, the performance of two finite element stress analysis software packages is compared, and the validity of the lower-cost method is confirmed. These results demonstrate the applicability of engineering methods for computational thermal striping calculations, enabling thermal striping estimations in large fluid systems such as the core of a Sodium-cooled nuclear reactor.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRSDate not supplied

Coupled Reactor and Engine Nuclear Thermal Propulsion Modeling Methodology

The design and development process of a Nuclear Thermal Propulsion (NTP) system requires extensive multiphysics modeling to couple the neutron physics and thermal feedback effects to determine the reactor’s power shape. Propulsion system performance codes utilize this power shape to determine NTP key performance parameters. While the power shape is heavily dependent on the temperature profile and geometry of the reactor, many analyses either assume a constant power shape, or use neutronics analysis to determine a power shape for a specific reactor configuration. The development of a coupling interface for a propulsion system performance code and a Monte Carlo neutron transport code (OpenMC) allows for the reactor power shape to be calculated in an iteration loop. The interface utilizes a file share system to transfer geometry dimensions, temperatures, and material identifiers to OpenMC, which is used to perform a neutron transport simulation of a design like the government Testing Reference Design reactor. The interface is then able to post-process the results from OpenMC and use the same file share system to share a power shape and other important neutron transport parameters to the system performance code. Initial results show that neglecting the changes to power shape when comparing reactor configurations can yield inaccurate results. Furthermore, utilizing propellants other than hydrogen gas can cause significant changes to the power shape, and thus, the thermal performance of a specific reactor design. This methodology is being expanded to allow for multiple families of NTP reactors to be analyzed, including block moderator, particle bed, and NERVA-derived reactors.

multiphysics coupling↗