Search NASA⌕ Search

SEARCH · Search NASA

Results for “Neutron analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

NEUTRON DIFFRACTION MEASUREMENT OF RESIDUAL STRESSES IN FRICTION STIR PROCESSED NANOCOMPOSITE SURFACE LAYER

Friction stir processing (FSP) was successfully used to stir and mix nano-sized Al2O3 particles into a Al6061-T6 aluminum plate to form a nanocomposite layer up to 3 mm thick. This nanocomposite surface has demonstrated significantly improved surface hardness, yield strength, and wear-resistance without sacrificing the substrate ductility and conductivity. Neutron diffraction analysis was conducted to determine the residual stress distribution in the nanocomposite surface layer. For comparison, the residual stress of the aluminum surface that was processed similarly but had no particle involved was also measured. Results showed that the macro-level residual stresses in the FSP zone without particles are low due to the annealing effect induced by the long heating time and large heat input. The macro-level residual stresses in the FSP-processed Al-Al2O3 nanocomposite zone are tensile up to 100 MPa in all three directions. The details of the results will be further discussed in the paper.

36 MATERIALS SCIENCE↗

Polar clusters in impurity-doped quantum paraelectric K{sub 1-x}Li{sub x}TaO{sub 3}

From density-functional calculations, we show that large off-center motions (approx =1.0 A) of Li impurities in the KTaO{sub 3} matrix (studied at 3.7% concentration) create very anisotropic polar clusters oriented along the Li off-center dipole. The polarization induced by Li in the matrix decreases very sharply in the lateral directions so that polar clusters are only approx = two lattice constants thick (one-dimensional or needlelike clusters). The polarization in such polar regions is mainly constituted by the displacements in the (highly polarizable) matrix rather than by the impurity itself. These results suggest that Li-doped potassium tantalate (3.7% concentration) is not ferroelectric at low temperature and rather behaves as a relaxor. These small polar zones around Li correlate at T{sub B} to form larger polar nanoregions, in which the matrix remains however nonpolar. This is confirmed by a low temperature neutron-diffraction analysis showing that the KTaO{sub 3} matrix remains paraelectric. Li-doped KTaO{sub 3} is an order-disorder system with a very deep local potential felt by the Li impurities (approx =-200 meV). The energy barrier for Li hopping is estimated at 80-90 meV. An analytic expression for this local potential is provided, as well as a simple model describing the energetics of K{sub 1-x}Li{sub x}TaO{sub 3}.

36 MATERIALS SCIENCE↗

Understanding the pH-Dependent Reaction Mechanism of a Glycoside Hydrolase Using High-Resolution X-ray and Neutron Crystallography

Glycoside hydrolases (GHs) commonly use the retaining or inverting mechanisms to hydrolyze carbohydrates, and the rates of catalysis are usually pH dependent. Deeper understanding of these pH-dependent reaction mechanisms is of great importance for protein engineering and drug design. We used high-resolution X-ray crystallography to analyze the sugar ring configurations of an oligosaccharide ligand during hydrolysis for the family 11 GH, and the results support the 1 S 3 → 4 H 3 → 4 C 1 conformational itinerary. These results indicate that sugar ring flexibility may help to distort and break the glycosidic bond. Constant pH molecular dynamics simulations and neutron crystallography demonstrate that the catalytic glutamate residue (E177) has alternate conformational changes to transfer a proton to cleave the glycosidic bond. Furthermore, a neutron crystallography analysis shows that the H-bond length between E177 and its nearby tyrosine residue (Y88) is shortened when the pH increases, preventing E177 from rotating downward and obtaining a proton from the solvent for catalysis. This result indicates that the H-bond length variation may play a key role in the pH-dependent reaction mechanism. Here, our results demonstrate that both sugar ring flexibility and protein dynamics are important in the pH-dependent reaction mechanism and may help to engineer GHs with different pH optima.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of a kinetic length scale which dictates alloy phase composition in Ni-Al interfaces on annealing at low temperatures

Ni-aluminides are an important class of intermetallics from technological point of view. Ni-Al phase diagram has been studied in detail experimentally as well as theoretically. It is known that if annealed at low temperature, the first alloy phase is usually NiAl{sub 3} according to Bené's rule. It is also understood that heat of formation may get modified by local densities of the constituents forming the alloy. In this regard, it is important to identify a kinetic length scale for defining “local density” in a system. We have deposited ultrathin multilayers of Ni and Al of layer thickness in tens of nanometres with Ni:Al stoichiometric ratio as 3:1 and 1:3, respectively. Considering these stoichiometry, Ni{sub 3}Al and NiAl{sub 3} are the thermodynamically favoured alloy phases in these samples. We used x-ray reflectivity, polarized neutron reflectivity, x-ray diffraction, and secondary ion mass spectroscopy to follow the alloy formation after annealing and identified the alloy phases at interfaces with nanometre resolution. Diffusion length of Ni and Al was obtained using Darken's law. Our results predict that ‘diffusion length’ is the unique length scale that connects kinetics to local density. In another interesting observation, using “virtual Kirkendall markers” at the interfaces, we showed asymmetry in consumption of Al for alloy formation, at Al on Ni (Al/Ni) and Ni on Al (Ni/Al) interfaces by comparing as-deposited and annealed states with respect to the markers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strong, Yet Split Hydrogen Bonding with Ice Rules in Delafossite (H/D)RhO 2

Despite remaining enigmatic, strong hydrogen bonding provides an advanced design handle for tailoring the properties of functional materials. Here, in this study, 3 R –(H/D)RhO 2 delafossites (prepared by ion exchange of Na + from NaRhO 2 ) contain H/D in linear coordination with O, linking Rh III O 2 layers. Bragg and real-space X-ray and neutron scattering analysis, vibrational and solid-state NMR spectroscopy, and density functional theory (DFT)–based electronic structure calculations have been employed to understand the nature of the hydrogen bonding. Despite short distances between H/D and the two O to which they are bonded, a clear double-minimum corresponding to a shorter and longer (H/D)–O distance is established. The triangular lattices formed by H/D appear to display ice-like disorder, corroborated by low-temperature heat capacity measurements.

NMR spectroscopy↗

Cosmochemical Studies: Meteorites, Asteroidal Processes, Chondrules

Our research mainly concerned the asteroidal processes involved in the formation of meteorites and meteoritic chondrules. We continued to generate large amounts of instrumental-neutron-activation analysis (INAA) data, both for irons, chondrites and primitive achondrites. Major themes of our chondrule research were: (1) the temperature and crystallization history of individual chondrules, and (2) the evolution of the solar nebula during the period within which chondrule formation occurred. Much of our chondrule research was focused on the highly primitive CO3 chondrites. We initiated a study of the cooling history of high-FeO chondrules by characterizing the overgrowth layers on relict grains.. We also continued our studies of the composition and the formation of iron meteorites and the evolution of their parent planets. The large data sets that we have generated at UCLA allows systematic comparisons of the large magmatic groups both in terms of fractional crystallization (including rough estimates of non-metal contents of the parental melts) and in terms of the effects of variable contents of trapped melt. We have completed a preliminary study of group IIIAB in which we developed a trapped-melt model and more detailed studies of group IVA and the main-group pallasites. By comparing these large groups and modeling them by a combination of crystallization and melt trapping, we are able to better define both the formation processes and the nature of the solid/liquid elemental partitioning. We helped maintain the excellent neutron-activation facilities at UCLA, a major resource for the cosmochemical community.

Wasson, John T.↗

Structural Fluctuations and Thermophysical Properties of Molten II-VI Compounds

The objectives of the project are to conduct ground-based experimental and theoretical research on the structural fluctuations and thermophysical properties of molten II-VI compounds to enhance the basic understanding of the existing flight experiments in microgravity materials science programs as well as to study the fundamental heterophase fluctuation phenomena in these melts by: 1) conducting neutron scattering analysis and measuring quantitatively the relevant thermophysical properties of the II-VI melts (such as viscosity, electrical conductivity, thermal diffusivity and density) as well as the relaxation characteristics of these properties to advance the understanding of the structural properties and the relaxation phenomena in these melts and 2) performing theoretical analyses on the melt systems to interpret the experimental results. All the facilities required for the experimental measurements have been procured, installed and tested. Thermal diffusivity of molten tellurium has been measured by a laser flash method in the temperature range of 500 C to 900 C. The measured diffusivity as a function of temperature agrees fairly well with published data. However, a relaxation phenomenon, which shows a slow drift of the measured thermal conductivity toward the equilibrium value after cooling of the melt, was observed for the first time. An apparatus based on the transient torque induced by a rotating magnetic field has been developed to determine the viscosity and electrical conductivity of semiconducting liquids. Viscosity measurements on molten tellurium showed a similar relaxation behavior to the measured diffusivity. The density and volume expansion coefficients for pure Te and HgTe melts were measured as a function of temperature using a pycnometric method. A density maximum was found for both melts but no relaxation behavior was observed. Neutron scattering experiments were performed on the HgTe and HgZnTe melts and the results on pair distribution showed better resolution than previously reported. A simple kinetic theory, which contains the formation reactions of Te polymerization that increases the molecular weight, was proposed to interpret the relaxation behavior of HgZnTe viscosity data.

Su, Ching-Hua↗

Charge carrier motion and effect of fixed oxide charge in a microstructured silicon radiation detector

Signal formation in a microstructured semiconductor neutron detector is more complex than in planar diode geometry. Three-dimensional microstructures are laterally smaller than the ionization cloud length, and the electric fields may be weak enough to exhibit plasma time effects. This work is the first detailed treatment of charge carrier motion in these complex semiconductor devices to replicate the time profile and signal magnitude. Simulations were performed using COMSOL Multiphysics to investigate various parameters that affect the propagation of the charge cloud. It was observed that the size of the simulated three-dimensional structure had an impact on the induced current pulse, indicating the importance of simulation geometry optimization to accurately simulate charge cloud expansion. COMSOL Multiphysics was used to replicate accurate charge creation profiles using energy deposition information imported from radiation transport codes. A detailed simulation methodology is presented to benchmark preamplifier event pulses along with complexities in modeling the charge carrier motion along the etched microstructured trenches with Si–SiO 2 boundary conditions, including fixed oxide charge and interface trapping.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Rapid depletion analysis of flowing-pebble reactor systems at equilibrium using SCALE

Several high-temperature gas-cooled reactor concepts (and more recently, salt-cooled designs such as the fluoride salt-cooled high-temperature reactor) feature core designs employing continuously circulating fuel pebbles. These reactor designs permit both continuous online refueling of fuel elements as well as higher overall achievable discharge burnups. However, rapid calculation of time-dependent fuel isotopic inventories proves challenging for this class of dynamic systems with current analysis tools. While iterative approaches employing coupled neutron transport have been developed to solve this issue, rapid depletion analysis techniques are needed to calculate time-dependent inventories for individual pebbles and batches (and thus the construction of full- core inventory at equilibrium). We propose a depletion analysis strategy for this type of system for cores at equilibrium. Drawing upon previous neutronic analysis of the PBMR-400 equilibrium core, we demonstrate the viability of developing collapsed one-group cross section libraries suitable for performing rapid depletion analyses with SCALE. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Cylindrical Kernel Density Estimators For Monte Carlo Neutron Transport Reactor Physics Problems

Kernel Density Estimators (KDEs) have been investigated as an alternative to histogram tallies in Monte Carlo radiation transport simulations for capturing spatially-resolved quantities such as scalar flux and reaction rate densities. KDEs are non-parametric estimators that show potential for producing smooth estimates of quantities of interest with reduced variance compared to traditional histogram tallies. Furthermore, KDEs obtain estimates of the underlying distribution at user-defined points without requiring an underlying mesh, thus making KDEs an attractive potential alternative to histogram tallies. Recent work has introduced the Mean Free Path based KDE (MFP KDE) in order to capture distributions with large curvature at material interfaces, e.g. absorption reaction rates in UO{sub 2} fuel in light water reactors. However, the multivariate MFP KDE produces inaccuracies in the form of localized spikes in problems with material cross sections that contain large resonances. Since the MFP KDE works well in one dimension, it is hypothesized that a different MFP KDE formulation where the normalization coefficient only contains one factor of the cross section would be able to capture these distributions with large curvature without producing spikes in the estimate. This can be accomplished by using a cylindrical KDE whose 2-D support area is wedge-shaped and applying the MFP KDE to the radial component of the cylindrical KDE. These cylindrical KDEs use 2-D (r,θ) cylindrical coordinates with no dependence in axial dimension z. This paper derives the cylindrical KDE and the cylindrical MFP KDE and tests them on a reactor physics pin-cell benchmark problem, producing accurate estimates of flux and reaction rate densities with differences less than 0.5% when compared to a reference histogram. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Discrimination of phosgene from cyanogen chloride in recovered chemical munitions using tagged neutron interrogation with high-resolution gamma-ray spectroscopy

The Associated Particle technique has recently been utilized with a germanium-based high-resolution $\gamma$-ray spectrometer and assessed for its capability to improve field identification of recovered chemical warfare (CW) materiel through prompt gamma-ray neutron activation analysis (PGNAA) measurements. An accurate chemical identification is necessary for the safe handling, destruction, and disposal of such hazardous items. A particularly challenging pair of CW agents commonly found in recovered munitions are phosgene (CG) and cyanogen chloride (CK), which have two of three elements in common, i.e. chlorine and carbon, but differ in the third being either oxygen or nitrogen. The detection of both latter elements is complicated by high oxygen concentration in the field environment which interferes with the small signal produced from the chemical agents. The matter is further complicated by the precautionary field practice of overpacking recovered munitions with vermiculite in larger steel multiple round containers (MRCs), which places additional oxygen-rich material around the munition while further attenuating an already weak signal emitted from the munition center. Here, this work reports quantitative results from realistic field measurements of CG and CK simulants in mock 4.2-inch mortar rounds overpacked with vermiculite in a large MRC. Results obtained with the AP technique are compared to those obtained with the traditional PGNAA approach for both overpacked- and bare-munition measurements. The AP technique is shown to provide a much more confident discrimination between the two chemicals, particularly for the more challenging field-relevant overpacked measurements, where a significant gain in sensitivity to all the key elements chlorine, carbon, nitrogen and oxygen is achieved.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Aurivillius phases of PbBi{sub 4}Ti{sub 4}O{sub 15} doped with Mn{sup 3+} synthesized by molten salt technique: Structure, dielectric, and magnetic properties

Doping of manganese (Mn{sup 3+}/Mn{sup 4+}) into the Aurivillius phase Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15} was carried out using the molten salt technique for various Mn concentrations (x=0, 0.2, 0.4, 0.6, 0.8, and 1). Single phase samples could be obtained in the composition range with x up to 0.6 as confirmed by X-ray and neutron diffraction analysis. Dielectric measurements show a peak at 801, 803, 813 and 850 K for samples with x=0, 0.2, 0.4, and 0.6, respectively, related to the ferroelectric transition temperature (T{sub c}). The main contribution of the in-plane polarization for x{<=}0.2 which was calculated from the atomic positions obtained by the structure analysis is the dipole moment in the Ti(1)O{sub 6} layer; however, for x{>=}0.4 the polarization originates from the dipole moment in the Ti(2)O{sub 6} layer. Mn doping in the Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15} does not show any long range magnetic ordering. -- Graphical abstract: The dipole moment of TiO{sub 6} dependence of x in Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15} (0{<=}x{<=}0.6): (a) along a-axis and (b) on the ab plane. This figure indicated that polarization in the ab-plane contribute to the total polarization. Display Omitted Highlights: {yields} We have prepared Pb{sub 1-x}Bi{sub 4+x}Ti{sub 4-x}Mn{sub x}O{sub 15}, 0{<=}x{<=}1 by the molten-salt method. {yields} The oxides adopted A2{sub 1}am space group. {yields} Dipole moments of the inner Ti(1)O{sub 6} are the main polarization contributor for x{<=}0.2. {yields} Dipole moments of the outer Ti(2)O{sub 6} are the main polarization contributor for x>0.2. {yields} Ferromagnetic interactions show the contribution of mixed valence of Mn{sup 3+}/Mn{sup 4+}.

36 MATERIALS SCIENCE↗

Topological Antiferromagnetic Van der Waals Phase in Topological Insulator/Ferromagnet Heterostructures Synthesized by a CMOS-Compatible Sputtering Technique

Breaking time-reversal symmetry by introducing magnetic order, thereby opening a gap in the topological surface state bands, is essential for realizing useful topological properties such as the quantum anomalous Hall and axion insulator states. In this work, a novel topological antiferromagnetic (AFM) phase is created at the interface of a sputtered, c-axis-oriented, topological insulator/ferromagnet heterostructure—Bi 2 Te 3 /Ni 80 Fe 20 because of diffusion of Ni in Bi 2 Te 3 (Ni-Bi 2 Te 3 ). The AFM property of the Ni-Bi2Te3 interfacial layer is established by observation of spontaneous exchange bias in the magnetic hysteresis loop and compensated moments in the depth profile of the magnetization using polarized neutron reflectometry. Analysis of the structural and chemical properties of the Ni-Bi2Te3 layer is carried out using selected-area electron diffraction, electron energy loss spectroscopy, and X-ray photoelectron spectroscopy. These studies, in parallel with first-principles calculations, indicate a solid-state chemical reaction that leads to the formation of Ni=Te bonds and the presence of topological antiferromagnetic (AFM) compound NiBi 2 Te 4 in the Ni-Bi 2 Te 3 interface layer. The Neél temperature of the Ni-Bi 2 Te 3 layer is ≈ 63 K, which is higher than that of typical magnetic topological insulators (MTIs). The presented results provide a pathway toward industrial complementary metal-oxide-semiconductor (CMOS)-process-compatible sputtered-MTI heterostructures, leading to novel materials for topological quantum devices.

36 MATERIALS SCIENCE↗

Optimizing Noncovalent Interactions Between Lignin and Synthetic Polymers to Develop Effective Compatibilizers

Experiments are designed and completed to identify an effective polymeric compatibilizer for lignin polystyrene blends. Copolymers of styrene and vinylphenol are chosen as the structure of the compatibilizer as the VPh unit can readily form intermolecular hydrogen bonds with the lignin molecule. Electron microscopy, thermal analysis, and neutron refl ectivity results demonstrate that among these compatibilizers, a copolymer of styrene and VPh with 20% 30% VPh most readily forms intermolecular interactions with the lignin molecule and results in the most well-dispersed blends with lignin. This behavior is explained by invoking the competition of intra- and intermolecular hydrogen bonding and functional group accessibility in forming intermolecular interactions.

Henry, Nathan↗

Hybrid analysis of radiative corrections to neutron decay with current algebra and effective field theory

We introduce a useful framework for high-precision studies of the neutron beta decay by merging the current algebra description and the fixed-order effective field theory calculation of the electroweak radiative corrections to the neutron axial form factor. We discuss the advantages of this hybrid method and show that it only requires a minimal amount of lattice QCD inputs to achieve a 10 –4 theory accuracy for the Standard Model prediction of the neutron lifetime and the axial-to-vector coupling ratio λ, both important to the search for physics beyond the Standard Model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Processing of crack-free high density polycrystalline LiTaO3 ceramics

Our work achieved high density (99.9%) polycrystalline LiTaO 3 . The keys to the high density without cracking were the use of LiF-assisted densification to maintain fine grain size as well as the presence of secondary lithium aluminate phases as grain growth inhibitors. The average grain size of the hot pressed polycrystalline LiTaO 3 is less than 5 μm, limiting residual stresses caused by the anisotropic thermal expansion. Dilatometry results clearly indicate liquid phase sintering via the added LiF sintering aid. Efficient liquid phase sintering allows densification during low temperature hot pressing. Electron microscopy confirmed the high-density microstructure. Furthermore, Rietveld analysis of neutron diffraction data revealed the presence of LiAlO 2 and LiAl 5 O 8 minority phases and negligible substitutional defect incorporation in LiTaO 3 .

36 MATERIALS SCIENCE↗

DISTRIBUTION OF LANTHANIDE AND ACTINIDE ELEMENTS BETWEEN BIS-(2-ETHYLHEXYL)PHOSPHORIC ACID AND BUFFERED LACTATE SOLUTIONS CONTAINING SELECTED COMPLEXANTS

With the renewed interest in the closure of the nuclear fuel cycle, the TALSPEAK process is being considered for the separation of Am and Cm from the lanthanide fission products in a next generation reprocessing plant. However, an efficient separation requires tight control of the pH which likely will be difficult to achieve on a large scale. To address this issue, we measured the distribution of lanthanide and actinide elements between aqueous and organic phases in the presence of complexants which were potentially less sensitive to pH control than the diethylenetriaminepentaacetic (DTPA) used in the process. To perform the extractions, a rapid and accurate method was developed for measuring distribution coefficients based on the preparation of lanthanide tracers in the Savannah River National Laboratory neutron activation analysis facility. The complexants tested included aceto-, benzo-, and salicylhydroxamic acids, N,N,N&#x27;,N&#x27;-tetrakis(2-pyridylmethyl)ethylenediamine (TPEN), and ammonium thiocyanate (NH{sub 4}SCN). The hydroxamic acids were the least effective of the complexants tested. The separation factors for TPEN and NH{sub 4}SCN were higher, especially for the heaviest lanthanides in the series; however, no conditions were identified which resulted in separations factors which consistently approached those measured for the use of DTPA.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗