Search NASA⌕ Search

SEARCH · Search NASA

Results for “Numerical Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49

Code-to-code comparison between FLASH and HYDRA in gas-puff Z-pinch modeling

The numerical modeling of gas-puff Z pinches involves the nonlinear coupling of a broad range of complex, multi-physics phenomena that makes such simulations challenging. The challenge is further compounded by nonlinear instabilities that can impact the dynamics of imploding gas-puff Z pinches, such as the magneto Rayleigh–Taylor instability (MRTI). If the growth rate and amplitude of the latter is comparable to the relevant timescales and properties of the imploding plasma, the MRTI can dramatically alter implosion dynamics, dictate pinch stability, and govern the plasma properties achievable in pulsed-power-driven laboratory experiments. National Laboratories and academic teams have developed numerical tools that can accurately model Z-pinch configurations and provide reliable design capabilities that can guide experimental choices and assist in interpreting experimental results. Most such tools, however, are not broadly available. Here, we present newly developed Z-pinch simulation capabilities of the publicly available FLASH code, applied in the study of MRTI growth and dynamical effects in gas-puff implosions. To verify the new implementations, we perform a comparison of FLASH gas-puff implosion simulations with previously published calculations with the HYDRA code from Lawrence Livermore National Laboratory, which have been validated with experimental data from the CESZAR pulsed-power driver at the University of California, San Diego. The experiments involved double- and triple-nozzle configurations, in an experimental attempt to stabilize the pinch to the MRTI. The code-to-code comparison shows similar results between the FLASH and HYDRA simulations, supporting the use of FLASH in the modeling of future gas-puff Z-pinch experiments at CESZAR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Assessing the Risk of Crew Injury Due to Dynamic Loads During Spaceflight

Spaceflight requires tremendous amounts of energy to achieve Earth orbit and to attain escape velocity for interplanetary missions. Although the majority of the energy is managed in such a way as to limit the accelerations on the crew, several mission phases may result in crew exposure to dynamic loads. In the automotive industry, risk of serious injury can be tolerated because the probability of a crash is remote each time a person enters a vehicle, resulting in a low total risk of injury. For spaceflight, the level of acceptable injury risk must be lower to achieve a low total risk of injury because the dynamic loads are expected on each flight. To mitigate the risk of injury due to dynamic loads, the NASA Human Research Program has developed a research plan to inform the knowledge gaps and develop relevant tools for assessing injury risk. The risk of injury due to dynamic loads can be further subdivided into extrinsic and intrinsic risk factors. Extrinsic risk factors include the vehicle dynamic profile, seat and restraint design, and spacesuit design. Human tolerance to loads varies considerably depending on the direction, amplitude, and rise-time of acceleration therefore the orientation of the body to the dynamic vector is critical to determining crew risk of injury. Although a particular vehicle dynamic profile may be safe for a particular design, the seat, restraint, and suit designs can affect the risk of injury due to localized effects. In addition, characteristics intrinsic to the crewmember may also contribute to the risk of injury, such as crewmember sex, age, anthropometry, and deconditioning due to spaceflight, and each astronaut may have a different risk profile because of these factors. The purpose of the research plan is to address any knowledge gaps in the risk factors to mitigate injury risk. Methods for assessing injury risk have been well documented in other analogous industries and include human volunteer testing, human exposure to dynamic environments, post-mortem human subject (PMHS) testing, animal testing, anthropomorphic test devices (ATD), dynamic models of the human, numerical models of ATDs, and numerical models of the human. Each has inherent strengths and limitations. For example, human volunteer testing is advantageous because a population can be selected that is similar to the astronaut corps; however, because of the inherent ethical limitations, only sub-injurious conditions can be tested. PMHSs can be tested in a variety of conditions including injurious levels, but the responses are not completely analogous to living human subjects. In addition, it is exceedingly difficult to select a PMHS population that is similar to the astronaut corps. ATDs are currently widely used in the automotive industry and military because they are highly repeatable and durable. Unfortunately, because they are mechanical models of the human body, the biofidelity of the responses are limited to dynamic conditions used to validate the ATD. Numerical models of the ATD, in addition to the strengths and limitations for ATDs, are easy to use for a variety of designs before a design is fabricated, but also have additional limitations for ATDs, are easy to use for a variety of designs before a design is fabricated, but also have additional uncertainty. Dynamic models are simple and easy to use, but do not account for localized effects of the seat and suit. Finally, numerical models of the human have the potential to have the most advantages; however, the current models are not validated for the conditions expected during spaceflight. To properly assess spaceflight conditions with numerical human models, human data would be needed to optimize the model responses for those conditions. Using the appropriate assessment method with the knowledge gained for each risk factor, an appropriate approach for mitigating the risk of injury due to dynamic loads can be developed ensuring crew safety in future NASA vehicles.

Somers, J. T.↗

Optimizing Prediction Error for Time-dependent Solar Radiation Modeling

Numerical weather forecasting models and statistical methods have found wide use to help power companies estimate renewable output, but better methods are needed, particularly for extended forecasts. Machine learning approaches have been used here as well, but so far a major limitation is the ability to also predict the corresponding uncertainty in a forecast. Here we show that both can be done and demonstrate this using a long-term-short memory neural network where the difference between predicted and ground truth data are used to train a model for the corresponding forecast uncertainties.

97 MATHEMATICS AND COMPUTING↗

A comparison of cloud microphysical quantities with forecasts from cloud prediction models

Numerical weather prediction models (ECMWF, NCEP) are evaluated using ARM observational data collected at the Southern Great Plains (SGP) site. Cloud forecasts generated by the models are compared with cloud microphysical quantities, retrieved using a variety of parameterizations. Information gained from this comparison will be utilized during the FASTER project, as models are evaluated for their ability to reproduce fast physical processes detected in the observations. Here the model performance is quantified against the observations through a statistical analysis. Observations from remote sensing instruments (radar, lidar, radiometer and radiosonde) are used to derive the cloud microphysical quantities: ice water content, liquid water content, ice effective radius and liquid effective radius. Unfortunately, discrepancies in the derived quantities arise when different retrieval schemes are applied to the observations. The uncertainty inherent in retrieving the microphysical quantities using various retrievals is estimated from the range of output microphysical values. ARM microphysical retrieval schemes (Microbase, Mace) are examined along with the CloudNet retrieval processing of data from the ARM sites for this purpose. Through the interfacing of CloudNet and “ARM” processing schemes an ARMNET product is produced and employed as accepted observations in the assessment of cloud model predictions.

54 ENVIRONMENTAL SCIENCES↗

On the stability of Schwarzschild's triaxial galaxy model

The numerical model for a triaxial galaxy constructed by Schwartzschild (1979) has been tested by means of fully self-consistent three-dimensional n-body numerical experiments that use a representation of this model to start the integration. The integration, study models, initial load, and correcting potential of the experiment are detailed. Preliminary checks included density values, potential values, and integration in potential of an ideal model. The results showed some particle loss and no significant shape change. The model is rugged and robust, and no growing disturbances with growth rate in excess of 0.5 per crossing time could be detected. Runs were done at 50 percent excess halo and with tube orbits reversed.

Smith, B. F.↗

An experimental and numerical study of wellbore leakage mitigation using pH-triggered polymer gelant

The potential leakage of hydrocarbon fluids or carbon dioxide from subsurface formations is a primary concern in wellbore integrity, oil and gas production, and CO 2 storage. Leaky wells with fractured cement or debonded microannuli are common sources of subsurface fluid leakage. The hydrocarbon fluid or CO 2 can migrate through such pathways to shallower formations and ultimately to surface. Cement fractures may have apertures on the order of microns, which are difficult to seal with typical workover techniques. A material that provides low viscosity during the injection but much higher viscosity after injection, with a minimum pressure gradient to yield flow at the target zone, is a potentially effective approach to seal the leakage pathways through cement fractures. pH-triggered polymers are such a material: aqueous solutions with low viscosity at low pH, containing pH-sensitive microgels which viscosify upon neutralization to become highly swollen gels with substantial yield stress that can block fluid flow. For the wellbore leakage application, the large alkalinity of wellbore cement provides the required neutralization. Our coreflood and rheological experiments show that pH-triggered polymer sealants such as polyacrylic acid polymer provide a robust seal if the process is properly designed; however, its long-term applicability depends on the dynamic geochemical environment of the wellbore. The process comprises three stages: (1) injection of a chelating agent as the preflush to ensure a favorable environment for the polymer gel, (2) injection of polymer solution, and (3) shut-in for the polymer gelation. A systematic study was done to understand the conditions under which the polymer gel remains stable and effectively seals the leakage pathways. A numerical model, based on polymer rheological properties and governing mechanisms observed in the laboratory experiments, was developed to simulate the reactive flow and transport of pH-triggered polymers in narrow fractures. Comparison with experiments shows a generally good agreement, despite the relative simplicity of the model. The numerical model was used to investigate further the underlying mechanisms of the process. The results can be used to design effectively the remediation process for a known fracture aperture size of the target zone.

42 ENGINEERING↗

Measurement of the performance of a spiral wound polyimide regenerator in a pulse tube refrigerator

A regenerator for use in a pulse tube refrigerator has been constructed from a polyimide (polypyromellitimide or PPMI) whose small ratio of thermal conductivity to heat capacity make it a good candidate for a regenerator material in cryocoolers. The regenerator was fabricated using 25 micron thick photoresist strips bonded to a 50 micron thick sheet of PPMI. This composite sheet was wound in jelly-roll fashion around a mandrel and inserted into the regenerator housing. The photoresist strips, formed using a photolithographic technique, provided a 25 micron spacing for the axial flow of gas between each layer of PPMI. Ineffectiveness results are presented for this material under actual operating conditions in a pulse tube refrigerator and compared with a numerical model. The numerical model indicated that a polyimide regenerator would perform much better than one constructed of stainless steel screen, but the experimental results showed the opposite behavior. Measured values for the ineffectiveness were 0.003 for the stainless steel screen and 0.017 for the polyimide.

Rawlins, Wayne↗

System and method for wave prediction

A method and system for prediction of wave properties include collecting time-series data streams from one or more wave measurement devices and processing the data to identify data parameters to establish boundary conditions of a numerical model. The numerical model may be used to compute a predicted wave field of time-series data for a variety of wave properties at a target location.

Previsic, Mirko↗

Quantitative assessment of soil CO 2 concentration and stable carbon isotope for leakage detection at geological carbon sequestration sites

This paper presents a quantitative method to evaluate CO 2 concentration ([CO 2 ]) and stable carbon isotope ratio (δ 13 C) as indicators for leakage detection at a geological carbon sequestration site by combining use of field release tests and a numerical modeling approach. A numerical model was developed to simulate CO 2 dynamics by considering diffusion, dissolution in soil water, and soil respiration. The numerical model fits the background dynamics of [CO 2 ] (360 to 550 ppm) and δ 13 C (-16‰ to -6‰) well and reproduces fairly the overall trend observed during the CO 2 release test. The model was further applied to assess detection probability (DP) of [CO 2 ] and δ 13 C for leakage detection in terms of various factors, such as CO 2 leakage rate, background variations, δ 13 C of the CO 2 leaked, and the threshold value of signal-to-noise ratio. Modeling results suggest that δ 13 C may have a higher DP than [CO 2 ]. This study also shows that DP of δ 13 C for the IEA Weyburn project is close to 0, implying δ 13 C is inappropriate to be an indicator for CO 2 leakage at the site. Finally, the quantitative method developed can also be used to design a monitoring plan or strategy in a near-surface environment for geological carbon sequestration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A study of the dynamics of the Intertropical Convergence Zone (ITCZ) in a symmetric atmosphere-ocean model

A numerical model of the circulation of a coupled axisymmetric atmosphere-ocean system was constructed to investigate the physical factors governing the location and intensity of the Intertropical Convergence Zone (ITCZ) over oceans and over land. The results of several numerical integrations are presented to illustrate the interaction of the individual atmospheric and oceanic circulations. It is shown that the ITCA cannot be located at the equator because the atmosphere-ocean system is unstable for lateral displacements of the ITCA from an equilibrium position at the equator.

Charney, J. G.↗

The generation and use of numerical shape models for irregular Solar System objects

We describe a procedure that allows the efficient generation of numerical shape models for irregular Solar System objects, where a numerical model is simply a table of evenly spaced body-centered latitudes and longitudes and their associated radii. This modeling technique uses a combination of data from limbs, terminators, and control points, and produces shape models that have some important advantages over analytical shape models. Accurate numerical shape models make it feasible to study irregular objects with a wide range of standard scientific analysis techniques. These applications include the determination of moments of inertia and surface gravity, the mapping of surface locations and structural orientations, photometric measurement and analysis, the reprojection and mosaicking of digital images, and the generation of albedo maps. The capabilities of our modeling procedure are illustrated through the development of an accurate numerical shape model for Phobos and the production of a global, high-resolution, high-pass-filtered digital image mosaic of this Martian moon. Other irregular objects that have been modeled, or are being modeled, include the asteroid Gaspra and the satellites Deimos, Amalthea, Epimetheus, Janus, Hyperion, and Proteus.

Simonelli, Damon P.↗

PLASMA NEAR THE HELIOSHEATH: OBSERVATIONS AND MODELING

Sound numerical modeling is capable of providing important predictive information about the solar wind interaction with the local interstellar medium. The results of our three-dimensional simulation show a good agreement with Voyager observations from 2007 to 2010. We analyze the termination shock properties at the Voyager crossing points and juxtapose them with the observed data. The heliospheric current sheet structure in the inner heliosheath is examined.

79 ASTRONOMY AND ASTROPHYSICS↗

Recent improvements to and validation of the one dimensional NASA wave rotor model

A numerical model has been developed at the NASA Lewis Research Center which can predict both the unsteady flow quantities within a wave rotor passage and the steady averaged flows in the ports. The model is based on the assumptions of one-dimensional, unsteady, perfect gas flow. The model assesses not only the dominant wave behavior, but the loss effects of finite passage opening time, leakage from the passage ends, viscosity, and heat transfer to and from the passages. The model operates in the rotor reference frame; however, until recently no account was made for the often significant effect of the rotor circumferential velocity component. The present model accounts for this by modifying the passage boundary conditions, allowing the internal computational scheme to remain the rotor reference frame, while quantities such as inlet duct stagnation properties may be specified in the fixed or absolute reference frame. Accurate modeling of this effect is critical to successful wave rotor analysis and design, particularly in off-design predictions where the flows in the inlet ducts are mismatched with the rotor passages and significant turning may take place (i.e., work is done on the gas). The relative simplicity of the model makes it useful for design and optimization, as well as analysis, of wave rotor cycles for many applications. This report, building on several earlier papers, describes the most recent modifications to the model. These include accounting for the relative/absolute transition at the passage boundaries and refinements to the viscous source term correlation which resulted from this accounting. Comparison of model predictions with measured data is then presented and discussed.

Paxson, Daniel E.↗

A nested numerical tidal model of the southern New England bight

Efforts were focused on the development and application of a three-dimensional numerical model for predicting pollutant and sediment transport in estuarine and coastal environments. To successfully apply the pollutant and sediment transport model to Rhode Island coastal waters, it was determined that the flow field in this region had to be better described through the use of existing numerical circulation models. A nested, barotropic numerical tidal model was applied to the southern New England Bight (Long Island, Block Island, Rhode Island Sounds, Buzzards Bay, and the shelf south of Block Island). Forward time and centered spatial differences were employed with the bottom friction term evaluated at both time levels. Using existing tide records on the New England shelf, adequate information was available to specify the tide height boundary condition further out on the shelf. Preliminary results are within the accuracy of the National Ocean Survey tide table data.

Gordon, R. B.↗

Machine learning based algorithms for uncertainty quantification in numerical weather prediction models

Complex numerical weather prediction models incorporate a variety of physical processes, each described by multiple alternative physical schemes with specific parameters. The selection of the physical schemes and the choice of the corresponding physical parameters during model configuration can significantly impact the accuracy of model forecasts. There is no combination of physical schemes that works best for all times, at all locations, and under all conditions. It is therefore of considerable interest to understand the interplay between the choice of physics and the accuracy of the resulting forecasts under different conditions. This paper demonstrates the use of machine learning techniques to study the uncertainty in numerical weather prediction models due to the interaction of multiple physical processes. The first problem addressed herein is the estimation of systematic model errors in output quantities of interest at future times, and the use of this information to improve the model forecasts. The second problem considered is the identification of those specific physical processes that contribute most to the forecast uncertainty in the quantity of interest under specified meteorological conditions. In order to address these questions we employ two machine learning approaches, random forests and artificial neural networks. The discrepancies between model results and observations at past times are used to learn the relationships between the choice of physical processes and the resulting forecast errors. Numerical experiments are carried out with the Weather Research and Forecasting (WRF) model. The output quantity of interest is the model precipitation, a variable that is both extremely important and very challenging to forecast. The physical processes under consideration include various micro-physics schemes, cumulus parameterizations, short wave, and long wave radiation schemes. The experiments demonstrate the strong potential of machine learning approaches to aid the study of model errors.

97 MATHEMATICS AND COMPUTING↗

Numerical simulations - Some results for the 2- and 3-D Hubbard models and a 2-D electron phonon model

Numerical simulations on the half-filled three-dimensional Hubbard model clearly show the onset of Neel order. Simulations of the two-dimensional electron-phonon Holstein model show the competition between the formation of a Peierls-CDW state and a superconducting state. However, the behavior of the partly filled two-dimensional Hubbard model is more difficult to determine. At half-filling, the antiferromagnetic correlations grow as T is reduced. Doping away from half-filling suppresses these correlations, and it is found that there is a weak attractive pairing interaction in the d-wave channel. However, the strength of the pair field susceptibility is weak at the temperatures and lattice sizes that have been simulated, and the nature of the low-temperature state of the nearly half-filled Hubbard model remains open.

Scalapino, D. J.↗